Rail Mount In-Line Amplifier
Model DV-05 DIN
DESCRIPTION
These in-line amplifiers feature DIN-rail mount enclosures with
front accessible electrical connections and adjustments. Ampli-
fiers are available for strain-gage transducers.
FEATURES
• DIN rail mount
• Unamplified transducer input
• Bridge-based transducer input
• 0 to ±5 V three-wire output with 11 Vdc to 28 Vdc power
• 3 Vdc or 5 Vdc excitation
• RFI, ESD protected
• CE approved
2 Honeywell • Sensing and Control
Model DV-05 DIN
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Number of channels 1
Case material Plastic
Mounting 35 mm DIN
Certification CE approved
AMPLIFIER CHARACTERISTICS
Characteristic Measure
Supply voltage 11 Vdc to 28 Vdc
Current draw 60 mA
Zero adjustment range,
coarse ±60 %
Zero adjustment range, fine ±10 %
Span adjustment range Switch selectable 0.5 mV/V to 13.3 mV/V
Span adjustment range,
fine ±20 %
Linearity ±0.01 %
Output ±5 Vdc
Output current 2 mA
Frequency response (-3 db) dc 7000 Hz with 350 ohm bridge
dc 2500 Hz with 5000 ohm bridge
Rise time (0 % to 90 %) 56 ms with 350 ohm bridge
145 ms with 5000 ohm bridge
Signal-to-noise ratio 66 db
dc power supply rejection
ratio Greater than 110 db
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -29 °C to 82 °C [-20 °F to 180 °F]
Temperature, storage -40 °C to 93 °C [-40 °F to 200 °F] MOUNTING DIMENSIONS AND CHARACTERISTICS
TYPICAL SYSTEM DIAGRAM
Not RoHS compliant
TRANSDUCER INTERFACE
Characteristic Measure
Transducer type Bridge-based sensor
Transducer excitation 3 Vdc or 5 Vdc @ 30 mA (short circuit
protection)
98,5 mm
[3.87 in]
Mating connector
Customer supplied
Chart recorder
Alarm panel
Data acquisition
Computer
PLC
Power supply
Sensor Model DV-05
OPTION CODES
2-pole lter
option
Many range/option combinations are available in
our quick-ship and fast-track manufacture pro-
grams. Please see http://sensing.honeywell.com/
TMsensor-ship for updated listings.
58e, 2-pole filter
setting
1 Hz 100 Hz
3 Hz 300 Hz
5 Hz 500 Hz
10 Hz 1000 Hz
20 Hz 2500 Hz (350 ohm bridge)
30 Hz 7000 Hz (5000 ohm bridge)
50 Hz
Sensing and Control
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
honeywell.com
008813-2-EN IL50 GLO
June 2014
Copyright © 2014 Honeywell International Inc. All rights reserved.
Model DV-05 DIN Rail Mount In-Line Amplifier
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and tness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
WARNING
PERSONAL INJURY
• DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
• The information presented in this datasheet is for
reference only. DO NOT USE this document as product
installation information.
• Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Find out more
Honeywell serves its customers
through a worldwide network of
sales offices, representatives
and distributors. For application
assistance, current specifica-
tions, pricing or name of the
nearest Authorized Distributor,
contact your local sales office.
To learn more about Honeywell’s
test and measurement products,
call +1-614-850-5000, visit
http://measurementsensors.
honeywell.com, or e-mail inqui-
ries to info.tm @ hone yw ell.com
