DESCRIPTION PERFORMANCE TEST METHOD JIS C5202
Resistance
Temperature As specified in table section 5.2 Measuring temperature +25°C/-55°C/+25°C/+125°C
Coefficient
Short-time Overload ± 1.0% maximum section 5.5 Rated voltage x2.5, 5 seconds
Terminal Strength ± 1.0% maximum section 6.1.4 Install a sample on the board and bend board 5/45mm
for 10 seconds (1/2 and 1 are 3/45mm)
Solder-Heat Resistance ± 1.0% maximum section 6.10 Dip into 260°C solder bath for 10 seconds
Solderability 95% minimum coverage section 6.11 After dipping into flux dip into 235°C solder bath
for 2 seconds
Temperature Cycle ± 1.0% maximum section 7.4 Cycle between -55°C and + 125°C for 5 cycles
Load Life in Moisture ± 2.0% maximum section 7.9 Rated voltage 1.5 hours ”ON” 0.5 hours ”OFF” 40°C
95%RH 1,000 Hours
Load Life ± 2.0% maximum section 7.10 Rated voltage 1.5 hours ”ON” 0.5 hours ”OFF” 70°C.
1,000 Hours
PERFORMANCE CHARACTERISTICS
RMC 16S, 16, 10, 18, 14, 12, 01
Rugged and easy to use, Kamaya thick film chip resistors are
suitable for a wide range of soldering methods and are ideal
for use with high-speed automatic insertion machinery. They
a re best suited for commercial, industrial and automotive applications.
3 . Thick film Ruthenium Oxide element for excellent
s t a b i l i t y.
4 . Operating temperatures range from -55 to 125°C.
1 . A wide range of values and power ratings for design
f l e x i b i l i t y.
2 . Excellent solderability for all soldering methods due
to superior termination composition/constru c t i o n .
F E A T U R E S
Unit = mm
Outer Electrode: Sn/Pb
Middle Electrode: Ni
Inner Electrode: Ag/Pd
Resistance is marked on 0603 and larger sizes by three
digits for 2% and 5% tolerances. 0805 and larger com-
ponents are marked with four digits for 1% tolerance.
DIMENSIONS AND STRUCTURE
4
Kamaya Inc. • Phone: 219-489-1533 • Fax: 219-489-2261 • www. k a m a y a . c o m
R A T I N G S
1 )T.C.R. less
than 100 ppm
and resistance
tolerances less
than 1% avail-
able in RGC and
RNC series.
2 )Resistance
values less than
1.0 available
in RLC series.
3 )For use as
j u m p e r, RMC
16S and RMC 16
rated at 1.0 amp
maximum, all
others 2 amps
maximum.
Maximum DCR
of 50 m.
4 )RMC 10 can be
operated up to
1/8 watt @ 70°C
and RMC 18 can
be operated up
to 1/4 watt @
70°C provided
the surface temp-
e r a t u re of the
resistor does not
exceed 125°C.
5
Kamaya Inc. • Phone: 219-489-1533 • Fax: 219-489-2261 • www. k a m a y a . c o m
RMC 10 - XXX or XXXX J T
Product Type
RMC = Thick Film
Chip Resistor
Wattage (size)
16S = 1/16 watt (0402)
16 = 1/16 watt (0603)
10 = 1/10 watt (0805)
18 = 1/8 watt (1206)
14 = 1/4 watt (1210)
12 = 1/2 watt (2010)
01 = 1.0 watt (2512)
Resistance Value
2 significant digits plus multiplier
102 = 1.0 K
1R0 = 1.0
"000" for jumper
3 significant digits plus multiplier for 1% tolerance
1002 = 10.0 K
10R0 = 10.0
Tolerance
F = ± 1%
G = ± 2%
J = ± 5%
P a c k a g i n g
B = Bulk
T = Tape and Reel (paper)
TP = Tape and Reel (plastic)
TH = Tape and Reel (paper,
2 mm pitch) (0402)
BA = Bulk Cart r i d g e
PART NUMBER SYSTEM
Resistance Range And To l e r a n c e
Ty p e R a t e d M a x i m u m M a x i m u m R e s i s t a n c e
( S i z e ) P o w e r Wo r k i n g O v e r l o a d Te m p . ± 1% (F) ± 2% (G) ± 5% (J)
@ 70°C Vo l t a g e Vo l t a g e C o e ff i c i e n t
W V V p p m / ° C E9 6 S e r i e s E2 4 S e r i e s E2 4 S e r i e s
RMC 16S ± 100 100 to 1 M
( 0 4 0 2 ) 0 . 0 6 3 5 0 1 0 0 ± 200 10 to 97.610 to 1 M10 to 5.6 M
+ 500/- 200 1 to 9.1
RMC 16 ± 100 100 to 1 M
( 0 6 0 3 ) 0 . 0 6 3 5 0 1 0 0 ± 200 10 to 97.610 to 1 M10 to 10 M
+ 500/- 200 1 to 9.1
RMC 10 ± 100 10 to 1 M
( 0 8 0 5 ) 1 5 0 3 0 0 ± 200 1.02 M to 10 M10 to 10 M10 to 22 M
+ 500/- 200 1 to 9.1 1 to 9.1
RMC 18 ± 100 10 to 1 M
( 1 2 0 6 ) 2 0 0 4 0 0 ± 200 1.02 M to 10 M10 to 10 M10 to 22 M
+ 500/- 200 1 to 9.76 1 to 9.1 1 to 9.1
RMC 14 ± 100 10 to 1 M
( 1 2 1 0 ) 0 . 2 5 2 0 0 4 0 0 ± 200 10 to 1 M10 to 20 M
+ 500/- 200 1 to 9.1
RMC 12 0 . 5 0 2 0 0 4 0 0 ± 100 10 to 1 M
( 2 0 1 0 ) ± 200 10 to 1 M10 to 20 M
+ 500/- 200 1 to 9.1
RMC 01 ± 100 10 to 1 M
( 2 5 1 2 ) 1 . 0 2 0 0 4 0 0 ± 200 10 to 1 M10 to 20 M
+ 500/- 200 1 to 9.1
0.1
0.05
1
20.05
0.1
0 . 1 2 5
0 . 2 5
0 . 1 0
0 . 1 2 5
Type RMC 16S RMC 16 RMC 10 RMC 18 RMC 14 RMC 12 RMC 01
(Size) (0402) (0603) (0805) (1206) (1210) (2010) (2512)
Dimension
L 1.0 ± 0.05 1.6 ± 0.1 2.0 ± 0.1 3.2 ± 0.15 3.2 ± 0.15 5.0 ± 0.15 6.3 ± 0.15
W 0.5 ± 0.05 0.8 ± 1.25 ± 0.1 1.6 ± 0.15 2.5 ± 0.15 2.5 ± 0.15 3.2 ± 0.15
H 0.35 ± 0.05 0.45 ± 0.1 0.55 ± 0.1 0.55 ± 0.1 0.55 ±0.15 0.55 ± 0.15 0.55 ± 0.15
0.20 ± 0.1 0.3 ± 0.1 0.4 ± 0.2 0.5 ± 0.25 0.5 ± 0.25 0.6 ± 0.2 0.6 ± 0.2
0.25 ± 0.3 ± 0.1 0.4 ± 0.2 0.5 ± 0.25 0.5 ± 0.25 0.6 ± 0.2 0.6 ± 0.2
Unit Weight 0.6 mg 2 mg 5 mg 9 mg 16 mg 25 mg 40 mg