1CT + 1CT e TXD+ | (P1 TXxD-(P2 cT|(P3 P4 + ICT cr(P& . RXD+ | (P7 75 RXD-(P8 753< 75 73 1000pF, 2KV ELECTRICAL SPECIFICATIONS: NOTES. 1.0 PINS WITHOUT ELECTRICAL CONNECTION ARE OMITTED. 1.0 TURNS RATIO: (P7P6P8) : (J3J6 : 1CT : 1CT+ 3% P1P3-P2 J1J2 : 1CT : 1CT + 3% 2.0 INDUCTANCE: (P7P8 : 350uH MIN. @ 0.1V, 100KHz, 8mA DC Bias P1P2 : 350uH MIN. @ 0.1V, 100KHz, 8mA DC Bias 3.0 LEAKAGE INDUCTANCE: P8P6P7 (WITH J6 AND J3 SHORT) : O.3uH MAX. @ 1MHz P2P3P1 (WITH J2 AND J1 SHORT) : O.3uH MAX. @ 1MHz 4.0 INTERWINDING CAPACITANCE: (P8,P6,P7) TO (J6,J3 : 3Opf MAX @ 1MHz P2,P3,P1) TO (J2,J1 : 3Opf MAX @ 1MHZ 5.0 DC RESISTANCE: (P7P8)=(J2u1) : 1.2 ohms Max. Bel Stewart Connector M ack 11118 Susquehanna Trail, South Glen Rock, Pa 17327-9199 717.234.7512 hitp://www.stewartconnector.com THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON ARE CONFIDENTIAL AND PROPERTY OF BEL STEWART ONNECTOR AND SHALL NOT BE REPRODUCED, COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN CONTENT} SHEET DRAWING NO. S|50148 0 4 OF BEL STEWART CONNECTOR, THE SUBJECT MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. 1 OF 46.0 RETURN LOSS: (J3J6)=100 OHMS AND (P1P2)=100 OHM REF. 1MHz TO 3OMHz 3OMHz TO 60MHz 60MHz TO 80MHz NOTE: 100 OHMS CONNECTED TO (J2J1) OR (P7-P8). 7.0 DIELECTRIC WITHSTAND: (J1, J2) TO (P7, P8) J3, J6) TO (P1,P2) 8.0 INSERTION LOSS: RS=RL=100 ohms 165MHz 9.0 RISE TIME: RS=100 OHMS AND RL = 100 OHMS OUTPUT VOLTAGE = 1 V peak PULSE WIDTH= 112nS 10.0 CROSS TALK: 165MHz 11.0 COMMON TO COMMON MODE ATTENUATION: 3OMHz TO 100MHz 100MHz TO 130MHz RECEIVE 18dB MIN. ~(1920 LOG (f/30MHz)) 12dB MIN. 1500 VAC 1500 VAC 1.0 dB MAX 3.0 nS MAX 5.0 nS MAX 35 dB MIN 30dB MAX 20dB MAX THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON ARE CONFIDENTIAL AND PROPERTY OF BEL STEWART ONNECTOR AND SHALL NOT BE REPRODUCED, COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN CONTENT THE SUBJECT MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. OF BEL STEWART CONNECTOR, Bel Stewart Connector 11118 Susquehanna Trail, South Glen Rock, Pa 17327-9199 717.234.7512 MagJack hitp://www.stewartconnector.com SHEET DRAWING NO. 2 OF 4 S|50148/"'04MagJack | .050 TYP Part Number z | 025 [0.64] Bel Stewart 100 [2.54] TYP 4} z % | | Se | = 3 | 635 [16.13] MAX | $.035 [0.89] (8) (SIGNAL 7 51/13 /- Pt = > 709 [17,96] nie 2 ee) TO POINT OF CONTACT WITH PANEL [ L Pr .00 > 4 Hobs | 0,062 [1.57] He. oy t g y d an 5 z z= g g = a) o 2 a | | 9 28 [3.25 3 | A [__ 2)(POST) usr 085 [2.12|| [_ 125 125 [3.18] ok Oo PIN: Jt HGEST PONT | ga .040 4.005 ns 14e 02 4.13] .450 [11. 43] Nu (REF.) 4 ~ .610 [15.49] P.C.B. RECOMMENDED HOLE LAYOUT NOTES: SEEN FROM COMPONENT SIDE 1. CONNECTOR MATERIALS: TOLERANCE +.003 [0.08] UNLESS OTHERWISE SPECIFIED HOUSING: THERMOPLASTIC UL94 V0 CONTACT/SHIELD: COPPER ALLOY SHIELD PLATING: NICKEL OR TIN CONTACT PLATING: SELECTIVE GOLD, 50 MICRO-INCHES MIN. IN CONTACT AREA. 2. PIN NOT ELECTRICALLY CONNECTED MAYBE OMITTED. SEE ELECTRICAL DRAWING FOR OMITTED PINS. 3. TOLERANCES COMPLY WITH F.C.C. DIMENSION REQUIREMENTS. ALL TOLERANCES NOT OTHERWISE SPECIFIED TO BE +.005 [0.13] 5. WAVE SOLDER COMPATIBLE PREHEAT 125C/90SECS. HIGH TEMPERATURE REFLOW COMPATABLE 230C/90 SEC MAX. > /\ wor SPECIAL LEAD LENGTH Bel Stewart Connector MagJacdk 11118 Susquehanna Trail, South Glen Rock, Pa 17327-9199 717.234.7512 hitp://www.stewartconnector.com ONNECTOR AND SHALL NOT BE REPRODUCED, COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN CONTENT} SHEET DRAWING NO. S|50148 0 4 OF BEL STEWART CONNECTOR, THE SUBJECT MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. 3 OF 4 Es DRAWING AND THE SUBJECT MATTER SHOWN THEREON ARE CONFIDENTIAL AND PROPERTY OF BEL STEWARTL-+- 656 wf} \ 554 [14.07] L 00 [0.00] (TOP OF PCB TO BOTTOM OF OPENING) 010 [0.25] MAX. RADIUS(4) SUGGESTED PANEL OPENING POINT OF CONTACT WITH PANEL 080 [2.03] =\ 6 rt. .275 [6.98] MAX. 1. THE SUGGESTED PANEL OPENING IS INTENDED 2. TO GIVE THE USER THE ABILITY TO HAVE REASONABLE JACK / PANEL CLEARANCES YET MAINTAIN RELIABLE GROUNDING CAPABILITY. ALL TOLERANCES NOT OTHERWISE SPECIFIED TO BE +.005 [0.13] Bel Stewart Connector 11118 Susquehanna Trail, South Glen Rock, Pa 17327-9199 717.234.7512 hitp://www.stewartconnector.com THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON ARE CONFIDENTIAL AND PROPERTY OF BEL STEWART ONNECTOR AND SHALL NOT BE REPRODUCED, COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN CONTENT) SHEET DRAWING NO. S|50148 0 4 THE SUBJECT MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. 4 OF 4 OF BEL STEWART CONNECTOR,