T - 1 (3mm) BLINKING LED LAMPS (R) Kingbright L-36BH BRIGHT RED L-36BG GREEN L-36BI HIGH EFFICIENCY RED L-36BY YELLOW L-36BSR SUPER BRIGHT RED Features Package Dimensions lWITH BUILT-IN BLINKING IC. lOPERATION VOLTAGE FROM 3.5V TO 13V. lBLINKING FREQUENCY FROM 2.5Hz TO 1.5Hz. Description The Bright Red source color devices are made with Gallium Phosphide Red Light Emitting Diode. The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subjected to change without notice. Selection Guide Part No. Dice Lens Type Iv (mcd) @ VF=9V Viewing Angle Min. Max. 21/2 L-36BHD BRIGHT RED (GaP) RED DIFFUSED 1.3 3.2 60 L-36BID HIGH EFFICIENCY RED (GaAsP/GaP) RED DIFFUSED 12.5 32 60 L-36BGD GREEN (GaP) GREEN DIFFUSED 5 32 60 L-36BYD YELLOW (GaAsP/GaP) YELLOW DIFFUSED 5 20 60 L-36BSRD-B SUPER BRIGHT RED (GaAlAs) RED DIFFUSED 100 300 60 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2-L36-1 Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Min. Typ. Max. Units peak Peak Wavelength Bright Red High Efficiency Red Green Yellow Super Bright Red 700 625 565 590 660 nm IF=20mA 1/2 Spectral Line Halfwidth Bright Red High Efficiency Red Green Yellow Super Bright Red 45 45 30 35 20 nm IF=20mA Min. IF=6mA Typ. IF=38-56mA Max.IF=70mA vF Forward Voltage All ISON Supply Current All 6 -70 mA f Blink Frequency All 2.5-1.5 Hz 3.5 9-12 13.0 Test Conditions V Absolute Maximum Ratings at TA=25C Parameter Power dissipation DC Forward Current Reverse Voltage Bright Red High Efficiency Red Green Yellow Super Bright Units Red 200 200 200 200 200 mW 38-56 38-56 38-56 38-56 38-56 mA 0.5 0.5 0.5 0.5 0.5 V -40 C To +70 C Operating Temperature -50 C To +100 C Storage Temperature 260 C For 5 Seconds Lead Soldering Temperature [1] Note: 1. 4mm below package base 2-L36-2 Bright Red L-36BHD High Efficiency Red L-36BID 2-L36-3 Green L-36BGD Yellow L-36BYD 2-L36-4 Super Bright Red L-36BSRD-B 2-L36-5