2-L36-1
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the lead emer-
ge package.
4. Specifications are subjected to change without
notice.
Selection Guide
Kingbright®
Features
lWITH BUILT-IN BLINKING IC.
lOPERATION VOLTAGE FROM 3.5V TO 13V.
lBLINKING FREQUENCY FROM 2.5Hz TO 1.5Hz.
Description
The Bright Red source color devices are made with Gallium
Phosphide Red Light Emitting Diode.
The Green source color devices are made with Gallium Phosphide
Green Light Emitting Diode.
The High Efficiency Red source color devices are made with
Gallium Arsenide Phosphide on Gallium Phosphide Orange
Light Emitting Diode.
The Yellow source color devices are made with Gallium Arsenide
Phosphide on Gallium Phosphide Yellow Light Emitting Diode.
The Super Bright Red source color devices are made with Gallium
Aluminum Arsenide Red Light Emitting Diode.
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
T - 1 (3mm) BLINKING LED LAMPS
L-36BH BRIGHT RED L-36BG GREEN
L-36BI HIGH EFFICIENCY RED L-36BY YELLOW
L-36BSR SUPER BRIGHT RED
Part No. Dice Lens Type
Iv (mcd)
@ VF=9V Viewing
Angle
Min. Max. 2θ1/2
L-36BHD BRIGHT RED (GaP) RED DIFFUSED 1.3 3.2 60°
L-36BID HIGH EFFICIENCY RED (GaAsP/GaP) RED DIFFUSED 12.5 32 60°
L-36BGD GREEN (GaP) GREEN DIFFUSED 5 32 60°
L-36BYD YELLOW (GaAsP/GaP) YELLOW DIFFUSED 5 20 60°
L-36BSRD-B SUPER BRIGHT RED (GaAlAs) RED DIFFUSED 100 300 60°
2-L36-2
Symbol Parameter Device Min. Typ. Max. Units Test Conditions
Peak
Wavelength
Bright Red
High Efficiency Red
Green
Yellow
Super Bright Red
700
625
565
590
660
nm IF=20mA
Spectral Line
Halfwidth
Bright Red
High Efficiency Red
Green
Yellow
Super Bright Red
45
45
30
35
20
nm IF=20mA
Forward Voltage All 3.5 9-12 13.0 VMin. IF=6mA
Typ. IF=38-56mA
Max.IF=70mA
Supply Current All 6 -70 mA
Blink Frequency All 2.5-1.5 Hz
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
λpeak
∆λ1/2
vF
Note:
1. 4mm below package base
ISON
f
Parameter Bright Red High
Efficiency
Red Green Yellow Super Bright
Red Units
Power dissipation 200 200 200 200 200 mW
DC Forward Current 38-56 38-56 38-56 38-56 38-56 mA
Reverse Voltage 0.5 0.5 0.5 0.5 0.5 V
Operating Temperature -40 To +70
Storage Temperature -50 To +100
Lead Soldering Temperature [1] 260 For 5 Seconds
°C°C
°C°C
°C
2-L36-3
Bright Red L-36BHD
High Efficiency Red L-36BID
2-L36-4
Green L-36BGD
Yellow L-36BYD
2-L36-5
Super Bright Red L-36BSRD-B
