DATA SHEET SMV1705 Series: Hyperabrupt Junction Tuning Varactors Applications Low-noise and wideband UHF and VHF VCOs High volume, low-cost batteries Features Low series resistance High capacitance ratio Packages rated MSL1, 260 C per JEDEC J-STD-020 Description Skyworks GreenTM products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of GreenTM, document number SQ04-0074. The SMV1705 group of silicon hyperabrupt junction varactor diodes is specifically designed for battery operation. The specified high capacitance ratio and low reverse voltage of these varactors make them appropriate for low-noise voltage controlled oscillators (VCOs) used at frequencies in wireless systems up to and above 10 GHz. Table 1 describes the various packages and markings of the SMV1705 group of varactors. Table 1. Packaging and Marking Common Cathode Single Single SOT-23 SC-79 GreenTM SOD-882 GreenTM SMV1705-004LF GreenTM Marking: HY3 SMV1705-079LF Marking: Cathode and YE SMV1705-040LF Marking: O LS = 1.4 nH LS = 0.7 nH LS = 0.45 nH The Pb-free symbol or "LF" in the part number denotes a lead-free, RoHS-compliant package unless otherwise noted as GreenTM. Tin/lead (Sn/Pb) packaging is not recommended for new designs. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200076O * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * August 18, 2016 1 DATA SHEET * SMV1705 SERIES VARACTORS Electrical and Mechanical Specifications Package and Handling Information The absolute maximum ratings of the SMV1705 group of varactors are provided in Table 2. Electrical specifications are provided in Table 3. Typical capacitance values are listed in Table 4. Typical performance characteristics of the SMV1705 varactors are illustrated in Figures 1 and 2. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. The SPICE model for the SMV1705 varactors is shown in Figure 3 and the associated model parameters are provided in Table 5. The SMV1705 series of varactors are rated to Moisture Sensitivity Level 1 (MSL1) at 260 C. They can be used for lead or lead-free soldering. For additional information, refer to the Skyworks Application Note, Solder Reflow Information, document number 200164. Package Dimensions Package dimensions are shown in Figures 4 to 8 (even numbers), and tape and reel dimensions are provided in Figures 5 to 9 (odd numbers). Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. Table 2. SMV1705 Series Absolute Maximum Ratings1 Parameter Symbol Minimum Maximum Units 12 V Reverse voltage VR Forward current IF 20 mA Power dissipation PDIS 250 mW Operating temperature TOP -55 +125 C Storage temperature TSTG -55 +150 C Electrostatic discharge: ESD 1000 1000 200 V V V Charged Device Model (CDM), Class 3 Human Body Model (HBM), Class 1C Machine Model (MM), Class B 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD handling precautions should be used at all times. Table 3. SMV1705 Series Electrical Specifications1 (TOP = 25 C, Unless Otherwise Noted) Parameter Symbol Test Condition Min Reverse current IR VR = 8 V Capacitance CT F = 1 MHz : VR = 1 V VR = 4 V 17.3 5.3 2.8 Capacitance ratio CTR CT @ 1 V/ CT @ 4 V Series resistance RS F = 470 MHz, VR = 1 V Breakdown voltage VBR IR = 10 A Typical Max Units <0.01 20 nA 18.3 6.1 19.3 6.6 pF pF 3.0 - 0.32 12 1 Performance is guaranteed only under the conditions listed in this table. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 2 August 18, 2016 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * 200076O V DATA SHEET * SMV1705 SERIES VARACTORS Table 4. Capacitance vs Reverse Voltage VR (V) CT (pF) 0 31.5 0.5 23.5 1.0 18.3 1.5 14.3 2.0 11.9 2.5 9.7 3.0 8.3 3.5 7.1 4.0 6.1 4.5 5.5 5.0 5.2 Typical Performance Characteristics +5 35 +4 20 15 10 5 0 0 1 2 3 4 Reverse Voltage (V) Figure 1. Capacitance vs Reverse Voltage 5 VR = 1 V +3 VR = 2.5 V +2 +1 VR = 4 V 0 -1 -2 200076-002 Percent of Variation (%) 25 200076-001 Capacitance (pF) 30 -3 -4 -40 -20 0 +20 +40 +60 +80 Temperature (C) Figure 2. Relative Capacitance Change vs Temperature Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200076N * Skyworks Proprietary and Confidential information * Products and Product Information are Subject to Change Without Notice * August 7, 2015 3 DATA SHEET * SMV1705 SERIES VARACTORS PORT P_anode port = 1 IND LS L = LS RES RS R = RS CAP CP C = CP DIODE Varactor_Diode AREA = 1 MODEL = Diode_Model MODE = nonlinear DIODEM Diode_Model IS = 1.00e-14 RS = 0 N=1 TT = 0 CJO = CJO M=M VJ = VJ EG = 1.11 XTI = 3 KF =0 AF =1 PORT P_Cathode port = 2 FC = 0.5 BV = VB IBV = 1e-3 ISR = 0 NR = 2 IKF = 0 NBV = 1 IBVL = 0 NBVL = 1 TBV1 = 0 TNOM = 27 FFE = 1 200076-003 Figure 3. SPICE Model Table 5. SPICE Model Parameters Part Number CJO (pF) VJ (V) M CP (pF) RS () LS (nH) SMV1705 31 3 2 0.5 0.32 0.8 Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 4 August 18, 2016 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * 200076O DATA SHEET * SMV1705 SERIES VARACTORS Box or Bar Polarity Indicator Area 0.006 (0.15 mm) Min 0.010 (0.25 mm) Min 0.014 (0.35 mm) Max 1 2 0.028 (0.70 mm) Min 0.035 (0.90 mm) Max 0.060 (1.50 mm) Min 0.067 (1.70 mm) Max 0.043 (1.10 mm) Min 0.051 (1.30 mm) Max 10 Max 0.020 (0.50 mm) Min 0.028 (0.70 mm) Max 0.003 (0.07 mm) Min 0.008 (0.20 mm) Max 10 Max Dimensions are in inches (millimeters shown in parentheses) 200076-004 Figure 4. SC-79 Package Dimensions O1.50 0.10 4.00 0.10 4.00 0.10 2.00 0.05 0.229 0.02 (T) 1.75 0.10 B A B 0.80 0.05 (Ko) 8.00 0.20 A 3.50 0.05 1.40 0.05 1.95 0.05 (Bo) 2 Max Pin 1 Indicator O0.50 0.05 Section B 0.39 0.05 Notes: 1. Carrier tape: black conductive polycarbonate or polystyrene. 2. Cover tape material: transparent conductive PSA. 3. Cover tape size: 5.4 mm width. 4. ESD-surface resistivity is 1 x 108 Ohms/square per EIA, JEDEC TNR Specification. 5. All measurements are in millimeters. 2o Max 0.90 0.05 (Ao) Section A 200076-005 Figure 5. SC-79 Tape and Reel Dimensions Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200076O * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * August 18, 2016 5 DATA SHEET * SMV1705 SERIES VARACTORS 0.110 (2.80 mm) Min 0.120 (3.04 mm) Max 0.012 (0.30 mm) Min 0.020 (0.50 mm) Max 3 0.083 (2.10 mm) Min 0.104 (2.64 mm) Max 0.047 (1.20 mm) Min 0.055 (1.40 mm) Max 2 1 0.037 (0.95 mm) Ref 0.020 (0.51 mm) Ref 0.076 (1.92 mm) Ref 0.035 (0.89 mm) Min 0.044 (1.12 mm) Max 0.003 (0.080 mm) Min 0.008 (0.20 mm) Max 8 Max 0.0005 (0.01 mm) Min 0.004 (0.10 mm) Max 0.022 (0.55 mm) Ref 200076-006 Dimensions are in inches (millimeters shown in parentheses) Figure 6. SOT-23 Package Dimensions 4.00 o1.00 Min. o1.5 + 0.1/-0 4.00 (See Note 5) 2.70 (Bo) R 0.3 Max 2.2 1.20 (Ko) 0.8 0.05 1.75 0.10 3.50 0.05 A 1.0 R 0.5 Typ. Pin 1 Indicator 8.00 + 0.3/-0.1 2.00 0.05 0.25 0.05 A 3.10 (Ao) Section A Notes: 1. Carrier tape: black conductive polycarbonate. 2. Cover tape material: transparent conductive PSA. 3. Cover tape size: 5.40 mm width. 4. Tolerance 0.10 mm. 5. Ten sprocket hole pitch cumulative tolerance: 0.2 mm. 6. All measurements are in millimeters. 7. Alternative carrier tape dimensions are: Ao = 3.3 Bo = 2.9 Ko = 1.22 200076-007 Figure 7. SOT-23 Tape and Reel Dimensions Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 6 August 18, 2016 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * 200076O DATA SHEET * SMV1705 SERIES VARACTORS 0.03 C Seating Plane 0.05/0.00 Pin 1 Indicator 2X 5 2X 0.25 0.05 0.10 M A B C 0.05 0.325 Terminal 1 1.000 0.650 B A 0.600 0.46 + 0.04 -0.06 0.05 2X 0.50 0.05 0.10 M A B 4 2X Notes: 1. 2. 3. 4. All measurements are in millimeters. Dimensions and tolerances according to ASME Y14.5M-1994. These packages are used principally for discrete devices. This dimension includes stand-off height and package body thickness, but does not include attached features, e.g., external heatsink or chip capacitors. An integral heatslug is not considered an attached feature. 5. This dimension is primarily terminal plating, but does not include small metal protrusion. 200076-008 Figure 8. SOD-882 Package Dimensions 4.00 0.10 Cathode Indicator 2.00 0.05 1.55 0.05 (D0) 0.20 8.00 0.1 1.75 0.10 3.50 0.05 1.15 0.05 (Bo) A 0.40 0.05 (D1) 0.47 0.05 (Ko) 2.00 0.05 B B A Section A 0.70 0.05 (A0) Notes: 1. 2. 3. 4. 5. Carrier tape: black conductive polycarbonate. Cover tape: transparent conductive material. Cover tape size: 5.4 mm width. ESD surface resistivity is 1 x 104 ~ 1 x 108 Ohms/square. All dimensions are in millimeters. Section B 200076-009 Figure 9. SOD-882 Tape and Reel Dimensions Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200076O * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * August 18, 2016 7 DATA SHEET * SMV1705 SERIES VARACTORS Copyright (c) 2002-2006, 2009- 2016 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. ("Skyworks") products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 8 August 18, 2016 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * 200076O