Plastic Film Capacitors Metallized Polypropylene Film Capacitor (For Automotive) Series ECQUA Class X2 NEW In accordance with UL/CSA and European safety regulation class X2 Equipped with a safety mechanism Features High safety (safety function installed) High humidity resistance (THB test : 85 C, 85 %, 240 V.AC, 1000 h ) High Thermal shock resistance-40 851000 cycles Flame-retardant plastic case and non-combustible resin AEC-Q200 compliant RoHS compliant Recommended applications Interference suppressors for automotive Explanation of part number 1 2 3 4 5 6 7 E C Q U A A F Product code Dielectric & construction 8 Rated voltage 9 10 Capacitance Code T S 11 12 Suffix 1 Suffix 2 Cap. Tol. 10K 20M Code 1 A Lead form Straight Cut lead Applicable standard It is certified as type ECQUA in the following approval. Approval UL UL60384-14 CSA CAN/CSA E60384-14 Europe EN60384-14 International IEC60384-14 Class Class X2 Class X2 Class X2 Class X2 Certification UL VDE When applying this capacitor to European and American safety standards, please use type designation and rating such as ECQUA, 0.1 F. Approval number (File No.) of safety regulations are subject to revision without notice. Ask factory for a copy of the latest file No. Specifications Category temp. range Rated voltage Capacitance range Capacitance tolerance Dissipation factor (tan ) Withstand voltage Insulation resistance (IR) Maximum AC voltage -40 C to +110 C 275 V.AC 0.10 F to 4.7 F 10 % (K), 20 % (M) C 1.0 F : tan 0.1 % ( 20 C, 1 kHz ) C > 1.0 F : tan 0.2 % ( 20 C, 1 kHz ) Between terminals633 V.AC, 1183 V.DC, 60 s Between terminals to enclosure2050 V.AC, 60 s C 0.33 F : IR 15,000 M (20 C, 100 V.DC, 60 s) C > 0.33 F : IR 5,000 M F (20 C, 100 V.DC, 60 s) C 0.47 F : IR 2,000 M (20 C, 500 V.DC, 60 s) 310 V.AC Use of this capacitor is limited to AC voltage (50 Hz or 60 Hz sine wave). A faint corona discharge may occur inside of the capacitor element at rated voltage, however there is no influence on the reliability of the capacitor. Maximum AC voltage including line voltage fluctuation is 310 V.AC. 310 V.AC is not nominal continuous applied voltage, but only indicates maximum value including in the voltage ofthe power supply. Basic nominal voltage is considered as 240 V.AC. This maximum AC voltae is specified in only ECQUA type, not specified in other types. Please refer to individual product specification, and contact us for further questions regarding design life. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 27-Aug-18 Plastic Film Capacitors Dimensions L0.5 Cut lead T0.5 Marking example H0.5 (Suffix A) 4.00.5 20 min. F0.4 (A) side d0.05 Q+1.4 -0.6 ECQUA104 275V ~ X2 A Solder-plated copper wire or Solder-plated copper-clad steel wire C (B) orC)side K B Note : Only 10 as cap. tol. be marked as "K" P(Lead location limits from center) Unit: Note: Date code. Rating * Dimensions Part No. ECQUAAF104T( ) ECQUAAF104S( ) ECQUAAF154T( ) ECQUAAF154S( ) ECQUAAF224T( ) ECQUAAF224S( ) ECQUAAF334T( ) ECQUAAF334S( ) ECQUAAF474T( ) ECQUAAF474S( ) ECQUAAF684T( ) ECQUAAF684S( ) ECQUAAF105T( ) ECQUAAF105S( ) ECQUAAF155T( ) ECQUAAF155S( ) ECQUAAF225T( ) ECQUAAF225S( ) ECQUAAF335T( ) ECQUAAF335S( ) ECQUAAF475T( ) ECQUAAF475S( ) Cap. Dimensions Min. order q'ty F L T H F d P Q Straight Cut lead 0.10 17.5 5.0 12.0 15.0 0.6 00.8 1.3 0.15 17.5 6.0 13.0 15.0 0.6 00.8 1.3 0.22 17.5 7.5 14.0 15.0 0.6 00.8 1.3 0.33 17.5 9.0 16.0 15.0 0.6 00.8 1.3 0.47 26.0 8.5 15.0 22.5 0.8 00.8 1.8 600 0.68 26.0 10.0 17.0 22.5 0.8 00.8 1.8 500 500 1.0 26.0 12.0 19.0 22.5 0.8 00.8 1.8 300 300 1.5 31.0 12.0 22.0 27.5 0.8 00.8 1.8 2.2 31.0 14.5 24.5 27.5 0.8 00.8 1.8 200 200 3.3 31.0 19.0 29.0 27.5 0.8 00.8 1.8 150 150 4.7 31.0 23.0 33.0 27.5 0.8 00.8 1.8 100 100 1000 1000 800 ( )Suffix for lead crimped Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 27-Aug-18 Guidelines and precautions regarding the technical information and use of our products described in this online catalog. If you want to use our products described in this online catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially cause personal injury (e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety equipment), it is necessary to verify whether the specifications of our products fit to such applications. Please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. The quality and performance of our products as described in this online catalog only apply to our products when used in isolation. Therefore, please ensure you evaluate and verify our products under the specific circumstances in which our products are assembled in your own products and in which our products will actually be used. If you use our products in equipment that requires a high degree of reliability, regardless of the application, it is recommended that you set up protection circuits and redundancy circuits in order to ensure safety of your equipment. The products and product specifications described in this online catalog are subject to change for improvement without prior notice. Therefore, please be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, purchase, or use our products. The technical information in this online catalog provides examples of our products' typical operations and application circuits. We do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. If any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and export control, shall be observed. <Regarding the Certificate of Compliance with the EU RoHS Directive/REACH Regulations> The switchover date for compliance with the RoHS Directive/REACH Regulations varies depending on the part number or series of our products. When you use the inventory of our products for which it is unclear whether those products are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the website inquiry form and contact us. We do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. 01-Apr-19