12
Iron Powder Core SMD Power Inductors
LMIP Series
LMIP
Power Inductor -
Iron Powder Core
2016
Size*
2016
2520
4040
5050
7070
M
Tolerance
M = ±20%
N = ±30%
S
Packaging
S = 13" Reel
R = 7" Reel*
*Sizes 2016
and 2520
only
1R0
Inductance
R10 = 0.1uH
1R0 = 1uH
100 = 10uH
A
Type
A = Standard
T
Termination
T = Sn Plated
1
Thickness
1 = 1.0mm
A = 1.2mm
B = 1.5mm
C = 1.8mm
2 = 2.0mm
3 = 3.0mm
J = 3.5mm
5 = 5.0mm
HOW TO ORDER
Iron powder core inductors feature a homogeneous con-
struction, exhibiting low loss and reduced inductance drop
due to applied current, allowing for higher current ratings in
low profile packages.
PRODUCT RANGE
SERIES Inductance Range (μH) ISAT Range (A)
LMIP2016****AT1R 0.47 – 2.2 1.55 – 3.0
LMIP2520****ATAR 0.47 – 2.2 2.4 – 4.5
LMIP4040****ATAS 0.47 – 6.8 2.2 – 6.8
LMIP4040****AT2S 0.1 – 6.8 2.1 – 22
LMIP5050****ATAS 1.0 – 6.8 2.3 – 6.0
LMIP5050****ATBS 1.0 – 6.8 3.2 – 9.0
LMIP5050****AT2S 0.1 – 6.8 3.6 – 15.5
LMIP7070****ATAS 0.56 – 6.8 2.4 – 11
LMIP7070****ATBS 0.33 – 6.8 4.0 – 19.5
LMIP7070****ATCS 0.33 – 8.2 4.0 – 22
LMIP7070****AT3S 0.1 – 8.2 6.0 – 60
LMIP7070****AT5S 0.68 – 8.2 5.5 – 17
• All test data referenced to 25ºC ambient.
• Operating temperature range: -40ºC ~ +125ºC
• Storage temperature: -40ºC ~ +85ºC
FEATURES
• Low Loss Iron Powder Core
• Megnetically Shielded
• Up to 3.0 MHz Frequency Range
• High Current Ratings
• Low Profile (down to 1.0mm)
APPLICATIONS
• DC/DC Converters
• DC/DC Converters for FPGA
• Inverters
• Power Supplies
• POL Converters
LEAD-FREE COMPATIBLE
COMPONENT
13
PHYSICAL SPECIFICATIONS
H
Recommended Land Pattern
T
L
W
A
B
C
AVX PN L W H Max T A B C
LMIP2016****AT1R 2.00±0.10 1.60±0.20 1.00 0.50±0.30 0.80 2.05 1.65
(0.079±0.004) (0.063±0.004) (0.039) (0.020±0.012) (0.031) (0.081) (0.065)
LMIP2520****ATAR 2.50±0.20 2.00±0.20 1.20 0.50±0.30 1.20 2.80 2.00
(0.098±0.008) (0.079±0.008) (0.047) (0.020±0.012) (0.047) (0.110) (0.079)
mm (inches)
A
B
C
D
EHL
W
Recommended Land Pattern
AVX PN L W H Max E D A B C
LMIP4040****ATAS 4.70±0.30 4.20±0.20 1.20 0.80±0.30 2.00±0.30 2.40 5.40 2.50
(0.185±0.012) (0.165±0.008) (0.047) (0.031±0.012) (0.079±0.012) (0.094) (0.213) (0.098)
LMIP4040****AT2S 4.70±0.30 4.20±0.20 2.00 0.80±0.30 2.00±0.30 2.40 5.40 2.50
(0.185±0.012) (0.165±0.008) (0.079) (0.031±0.012) (0.079±0.012) (0.094) (0.213) (0.098)
LMIP5050****ATAS 5.70±0.30 5.20±0.20 1.20 1.00±0.30 2.50±0.30 3.00 7.00 3.50
(0.224±0.012) (0.205±0.008) (0.047) (0.039±0.012) (0.098±0.012) (0.118) (0.276) (0.138)
LMIP5050****ATBS 5.70±0.30 5.20±0.20 1.50 1.00±0.30 2.50±0.30 3.00 7.00 3.50
(0.224±0.012) (0.205±0.008) (0.059) (0.039±0.012) (0.098±0.012) (0.118) (0.276) (0.138)
LMIP5050****AT2S 5.70±0.30 5.20±0.20 2.00 1.00±0.30 2.50±0.30 3.00 7.00 3.50
(0.224±0.012) (0.205±0.008) (0.079) (0.039±0.012) (0.098±0.012) (0.118) (0.276) (0.138)
LMIP7070****ATAS 7.20±0.30 6.60±0.20 1.20 1.50±0.30 3.00±0.30 4.00 8.50 3.50
(0.283±0.012) (0.260±0.008) (0.047) (0.059±0.012) (0.118±0.012) (0.157) (0.335) (0.138)
LMIP7070****ATBS 7.00±0.30 6.50±0.20 1.50 1.50±0.30 3.00±0.30 4.00 8.50 3.50
(0.276±0.012) (0.260±0.008) (0.059) (0.059±0.012) (0.118±0.012) (0.157) (0.335) (0.138)
LMIP7070****ATCS 7.20±0.30 6.60±0.20 1.80 1.50±0.30 3.00±0.30 4.00 8.50 3.50
(0.283±0.012) (0.260±0.008) (0.071) (0.059±0.012) (0.118±0.012) (0.157) (0.335) (0.138)
LMIP7070****AT3S 6.95±0.35 6.60±0.20 3.00 1.50±0.30 3.00±0.30 4.00 8.50 3.50
(0.274±0.014) (0.260±0.008) (0.118) (0.059±0.012) (0.118±0.012) (0.157) (0.335) (0.138)
LMIP7070****AT5S 7.20±0.30 6.60±0.20 5.00 1.50±0.30 3.00±0.30 4.00 8.50 3.50
(0.283±0.012) (0.260±0.008) (0.197) (0.059±0.012) (0.118±0.012) (0.157) (0.335) (0.138)
mm (inches)
Iron Powder Core SMD Power Inductors
LMIP Series
14
Iron Powder Core SMD Power Inductors
LMIP Series
2016 - 1.0mm HEIGHT
ELECTRICAL CHARACTERISTICS
AVX PN TOLERANCE L DCR TYP DCR MAX I
DC
I
SAT
MEASURING
(μH) (mΩ) (mΩ) (A) (A) CONDITION
LMIP2016MR47AT1R ±20% 0.47 38 46 2.9 3 100KHz/1.0V
LMIP2016M1R0AT1R ±20% 1 65 75 2.6 2.5 100KHz/1.0V
LMIP2016M2R2AT1R ±20% 2.2 131 160 1.6 1.55 100KHz/1.0V
2520 - 1.2mm HEIGHT
AVX PN TOLERANCE L DCR TYP DCR MAX I
DC
I
SAT
MEASURING
(μH) (mΩ) (mΩ) (A) (A) CONDITION
LMIP2520MR47ATAR ±20% 0.47 33 39 3.9 4.5 100KHz/1.0V
LMIP2520M1R0ATAR ±20% 1 45 59 3 3 100KHz/1.0V
LMIP2520M2R2ATAR ±20% 2.2 90 117 2.1 2.4 100KHz/1.0V
4040 - 1.2mm HEIGHT
AVX PN TOLERANCE L DCR TYP DCR MAX I
DC
I
SAT
MEASURING
(μH) (mΩ) (mΩ) (A) (A) CONDITION
LMIP4040MR47ATAS ±20% 0.47 19 21 6 6.8 100KHz/1.0V
LMIP4040MR68ATAS ±20% 0.68 32 36 4.5 6 100KHz/1.0V
LMIP4040M1R0ATAS ±20% 1 43 47 4.2 5.2 100KHz/1.0V
LMIP4040M1R5ATAS ±20% 1.5 68 75 3.25 4 100KHz/1.0V
LMIP4040M2R2ATAS ±20% 2.2 79.4 83.5 2.75 3.5 100KHz/1.0V
LMIP4040M3R3ATAS ±20% 3.3 120 138 2.3 3 100KHz/1.0V
LMIP4040M4R7ATAS ±20% 4.7 175 195 1.8 2.8 100KHz/1.0V
LMIP4040M6R8ATAS ±20% 6.8 292 358 1.5 2.2 100KHz/1.0V
4040 - 2.0mm HEIGHT
AVX PN TOLERANCE L DCR TYP DCR MAX I
DC
I
SAT
MEASURING
(μH) (mΩ) (mΩ) (A) (A) CONDITION
LMIP4040NR10AT2S ±30% 0.1 3.5 4 12 22 100KHz/1.0V
LMIP4040MR22AT2S ±20% 0.22 6 6.6 9 12.5 100KHz/1.0V
LMIP4040MR47AT2S ±20% 0.47 12.5 14 7 9.5 100KHz/1.0V
LMIP4040MR56AT2S ±20% 0.56 14 16 6.5 9 100KHz/1.0V
LMIP4040MR68AT2S ±20% 0.68 19.4 21 5.2 8 100KHz/1.0V
LMIP4040M1R0AT2S ±20% 1 24 27 4.5 7 100KHz/1.0V
LMIP4040M1R5AT2S ±20% 1.5 38 46 4 6 100KHz/1.0V
LMIP4040M2R2AT2S ±20% 2.2 52 58 3 5 100KHz/1.0V
LMIP4040M3R3AT2S ±20% 3.3 74 87 2.5 4 100KHz/1.0V
LMIP4040M4R7AT2S ±20% 4.7 92 105 2.2 3 100KHz/1.0V
LMIP4040M6R8AT2S ±20% 6.8 162 178 2 2.1 100KHz/1.0V
ISat: DC Current that will cause inductance to drop approximately 30%. IDC: DC current(A) that will cause an approximate ΔT of 40℃.
5050 - 1.5mm HEIGHT
AVX PN TOLERANCE L DCR TYP DCR MAX I
DC
I
SAT
MEASURING
(μH) (mΩ) (mΩ) (A) (A) CONDITION
LMIP5050M1R0ATBS ±20% 1 20 23 6.5 9 100KHz/1.0V
LMIP5050M1R2ATBS ±20% 1.2 22.5 26 6 8 100KHz/1.0V
LMIP5050M2R2ATBS ±20% 2.2 58 64 3.3 6 100KHz/1.0V
LMIP5050M3R3ATBS ±20% 3.3 65 72 3.2 5 100KHz/1.0V
LMIP5050M4R7ATBS ±20% 4.7 103 115 3 4 100KHz/1.0V
LMIP5050M6R8ATBS ±20% 6.8 167 180 2.5 3.2 100KHz/1.0V
5050 - 1.2mm HEIGHT
AVX PN TOLERANCE L DCR TYP DCR MAX I
DC
I
SAT
MEASURING
(μH) (mΩ) (mΩ) (A) (A) CONDITION
LMIP5050M1R0ATAS ±20% 1 31.3 32.9 5 6 100KHz/1.0V
LMIP5050M2R2ATAS ±20% 2.2 67 76 3.5 4 100KHz/1.0V
LMIP5050M3R3ATAS ±20% 3.3 85 98 3 3.7 100KHz/1.0V
LMIP5050M4R7ATAS ±20% 4.7 145 163 2.3 2.7 100KHz/1.0V
LMIP5050M6R8ATAS ±20% 6.8 225 250 2 2.3 100KHz/1.0V
15
5050 - 2.0mm HEIGHT
AVX PN TOLERANCE L DCR TYP DCR MAX IDC ISAT MEASURING
(μH) (mΩ) (mΩ) (A) (A) CONDITION
LMIP5050NR10AT2S ±30% 0.1 7.7 9 10.5 15.5 100KHz/1.0V
LMIP5050MR22AT2S ±20% 0.22 4.1 4.5 12 20 100KHz/1.0V
LMIP5050MR33AT2S ±20% 0.33 5.5 5.9 11.5 16 100KHz/1.0V
LMIP5050MR47AT2S ±20% 0.47 8 10 10.5 15.5 100KHz/1.0V
LMIP5050MR56AT2S ±20% 0.56 8.2 10 9.5 13 100KHz/1.0V
LMIP5050MR68AT2S ±20% 0.68 10.5 13 9 12 100KHz/1.0V
LMIP5050M1R0AT2S ±20% 1 15 17 8 9.5 100KHz/1.0V
LMIP5050M1R5AT2S ±20% 1.5 21 24.2 6 9 100KHz/1.0V
LMIP5050M2R2AT2S ±20% 2.2 30 35 5 6.5 100KHz/1.0V
LMIP5050M3R3AT2S ±20% 3.3 52 58 4.5 5.5 100KHz/1.0V
LMIP5050M4R7AT2S ±20% 4.7 78 85 3.5 4 100KHz/1.0V
LMIP5050M5R6AT2S ±20% 5.6 85.2 92 3 2.2 100KHz/1.0V
LMIP5050M6R8AT2S ±20% 6.8 107 120 2.8 3.6 100KHz/1.0V
Iron Powder Core SMD Power Inductors
LMIP Series
7070 - 1.2mm HEIGHT
AVX PN TOLERANCE L DCR TYP DCR MAX IDC ISAT MEASURING
(μH) (mΩ) (mΩ) (A) (A) CONDITION
LMIP7070MR56ATAS ±20% 0.56 13.5 15.5 7 11 100KHz/1.0V
LMIP7070MR68ATAS ±20% 0.68 15 17.5 6.7 9 100KHz/1.0V
LMIP7070MR82ATAS ±20% 0.82 21.5 24.5 6.3 8 100KHz/1.0V
LMIP7070M1R0ATAS ±20% 1 25 29 6 7 100KHz/1.0V
LMIP7070M2R2ATAS ±20% 2.2 51.5 59 4 5 100KHz/1.0V
LMIP7070M3R3ATAS ±20% 3.3 80 92 3 4 100KHz/1.0V
LMIP7070M4R7ATAS ±20% 4.7 106 122 2.7 3.5 100KHz/1.0V
LMIP7070M6R8ATAS ±20% 6.8 185 217 2.2 2.4 100KHz/1.0V
ISat: DC Current that will cause inductance to drop approximately 30%. IDC: DC current(A) that will cause an approximate ΔT of 40℃.
7070 - 1.5mm HEIGHT
AVX PN TOLERANCE L DCR TYP DCR MAX IDC ISAT MEASURING
(μH) (mΩ) (mΩ) (A) (A) CONDITION
LMIP7070MR33ATBS ±20% 0.33 6.8 7.8 10 19.5 100KHz/1.0V
LMIP7070MR56ATBS ±20% 0.56 9.5 11 9 14 100KHz/1.0V
LMIP7070MR68ATBS ±20% 0.68 10.5 12 8.5 12 100KHz/1.0V
LMIP7070MR82ATBS ±20% 0.82 15 17 7 10 100KHz/1.0V
LMIP7070M1R0ATBS ±20% 1 18.5 21 5.5 9 100KHz/1.0V
LMIP7070M1R5ATBS ±20% 1.5 37 42.5 5 7 100KHz/1.0V
LMIP7070M2R2ATBS ±20% 2.2 46 54 3.5 6 100KHz/1.0V
LMIP7070M3R3ATBS ±20% 3.3 54 63 3.3 5.5 100KHz/1.0V
LMIP7070M4R7ATBS ±20% 4.7 76 85 3 5 100KHz/1.0V
LMIP7070M5R6ATBS ±20% 5.6 96 118 2.8 4.5 100KHz/1.0V
LMIP7070M6R8ATBS ±20% 6.8 125 135 2.5 4 100KHz/1.0V
7070 - 1.8mm HEIGHT
AVX PN TOLERANCE L DCR TYP DCR MAX IDC ISAT MEASURING
(μH) (mΩ) (mΩ) (A) (A) CONDITION
LMIP7070MR33ATCS 20% 0.33 5.2 6.8 12 22 100KHz/1.0V
LMIP7070MR47ATCS 20% 0.47 7.3 8.4 11 17 100KHz/1.0V
LMIP7070MR68ATCS 20% 0.68 10.8 12.7 9 16 100KHz/1.0V
LMIP7070MR82ATCS 20% 0.082 13.4 15.9 8 14 100KHz/1.0V
LMIP7070M1R0ATCS 20% 1 14.5 17 7 12 100KHz/1.0V
LMIP7070M2R2ATCS 20% 2.2 31 35 5 8 100KHz/1.0V
LMIP7070M3R3ATCS 20% 3.3 56 60 3.5 7 100KHz/1.0V
LMIP7070M4R7ATCS 20% 4.7 68 70 3.2 5.5 100KHz/1.0V
LMIP7070M6R8ATCS 20% 6.8 101 110 2.8 4.5 100KHz/1.0V
LMIP7070M8R2ATCS 20% 8.2 124 142 2.5 4 100KHz/1.0V
16
Iron Powder Core SMD Power Inductors
LMIP Series
7070 - 3.0mm HEIGHT
AVX PN TOLERANCE L DCR TYP DCR MAX IDC ISAT MEASURING
(μH) (mΩ) (mΩ) (A) (A) CONDITION
LMIP7070NR10AT3S ±30% 0.1 1.5 1.7 32.5 60 100KHz/1.0V
LMIP7070MR22AT3S ±20% 0.22 2.5 2.8 23 34 100KHz/1.0V
LMIP7070MR33AT3S ±20% 0.33 3 3.5 21 25 100KHz/1.0V
LMIP7070MR47AT3S ±20% 0.47 3.5 4.1 18 20 100KHz/1.0V
LMIP7070MR56AT3S ±20% 0.56 3.9 4.5 16.5 18 100KHz/1.0V
LMIP7070MR68AT3S ±20% 0.68 4.5 5 16 17 100KHz/1.0V
LMIP7070MR82AT3S ±20% 0.82 7 7.5 14 16 100KHz/1.0V
LMIP7070M1R0AT3S ±20% 1 8.5 9 12 15 100KHz/1.0V
LMIP7070M1R5AT3S ±20% 1.5 10.6 12.1 10 13 100KHz/1.0V
LMIP7070M2R2AT3S ±20% 2.2 15.5 18 8 10 100KHz/1.0V
LMIP7070M2R5AT3S ±20% 2.5 18 20 7 10 100KHz/1.0V
LMIP7070M3R3AT3S ±20% 3.3 25 28 6.5 9 100KHz/1.0V
LMIP7070M4R7AT3S ±20% 4.7 32.5 35 5.5 6.5 100KHz/1.0V
LMIP7070M5R6AT3S ±20% 5.6 36 42 5 6.3 100KHz/1.0V
LMIP7070M6R8AT3S ±20% 6.8 43.9 50 4.5 6 100KHz/1.0V
LMIP7070M8R2AT3S ±20% 8.2 54 60 4.5 6 100KHz/1.0V
7070 - 5.0mm HEIGHT
AVX PN TOLERANCE L DCR TYP DCR MAX IDC ISAT MEASURING
(μH) (mΩ) (mΩ) (A) (A) CONDITION
LMIP7070MR68AT5S ±20% 0.68 3.3 3.6 18 17 100KHz/1.0V
LMIP7070MR82AT5S ±20% 0.82 4.6 4.9 16.5 17 100KHz/1.0V
LMIP7070M1R0AT5S ±20% 1 4.5 5.3 14.5 16 100KHz/1.0V
LMIP7070M1R5AT5S ±20% 1.5 6 7.5 11.5 15 100KHz/1.0V
LMIP7070M2R2AT5S ±20% 2.2 9 10.2 10.5 13.5 100KHz/1.0V
LMIP7070M3R3AT5S ±20% 3.3 14 15 9 12 100KHz/1.0V
LMIP7070M4R7AT5S ±20% 4.7 23 25 6.5 8 100KHz/1.0V
LMIP7070M5R6AT5S ±20% 5.6 31.5 34.4 6 7 100KHz/1.0V
LMIP7070M6R8AT5S ±20% 6.8 31 35.5 5.5 6.5 100KHz/1.0V
LMIP7070M8R2AT5S ±20% 8.2 40 43 5 5.5 100KHz/1.0V
17
Iron Powder Core SMD Power Inductors
LMIP Series
RECOMMENDED REFLOW PROFILE
260
240
220
200
180
160
140
150 ~ 180ºC
90 ± 30 s
30 ± 10 s
*Temperature on surface of circuit board.
Time(s)
Temperature (Cº)
230ºC Min.
5s Max.
Peak: 250 +5/-0 ºC
120
100
80
The products may be exposed to reflow soldering process of above profile up to two times.
18
Iron Powder Core SMD Power Inductors
LMIP Series
PACKAGING SPECIFICATIONS – CARRIER TAPE DIMENSIONS
AVX SERIES A B P F W T K Reel SPQ
SIZE TOL SIZE TOL SIZE TOL SIZE TOL SIZE TOL SIZE TOL SIZE TOL Size
LMIP2016****AT1R 1.84 ±0.10 2.25 ±0.10 4.00 ±0.10 3.50 ±0.10 8.00 ±0.10 0.22 ±0.05 1.15 ±0.10 7" 3000
(0.072) (±0.004) (0.089) (±0.004) (0.157) (±0.004) (0.138 (±0.004) (0.315) (±0.004) (0.009) (±0.002) (0.045) (±0.004)
LMIP2520****ATAR 2.60 ±0.10 3.00 ±0.10 4.00 ±0.10 3.50 ±0.10 8.00 ±0.10 0.30 ±0.05 1.35 ±0.10 7" 3000
(0.102 (±0.004) (0.118) (±0.004) (0.157) (±0.004) (0.138) (±0.004) (0.315) (±0.004) (0.012) (±0.002) (0.053) (±0.004)
LMIP4040****ATAS 4.40 ±0.10 5.10 ±0.10 8.00 ±0.10 5.50 ±0.10 12.0 ±0.30 0.35 ±0.05 1.40 ±0.10 13" 3500
(0.173) (±0.004) (0.201) (±0.004) (0.315) (±0.004) (0.217 (±0.004) (0.473) (±0.012) (0.014) (±0.002) (0.053) (±0.004)
LMIP4040****AT2S 4.40 ±0.10 5.10 ±0.10 8.00 ±0.10 5.50 ±0.10 12.0 ±0.30 0.35 ±0.05 2.20 ±0.10 13" 2000
(0.173) (±0.004) (0.201) (±0.004) (0.315) (±0.004) (0.217 (±0.004) (0.473) (±0.012) (0.014) (±0.002) (0.087) (±0.004)
LMIP5050****ATAS 5.40 ±0.10 6.10 ±0.10 8.00 ±0.10 5.50 ±0.10 12.0 ±0.30 0.35 ±0.05 1.60 ±0.10 13" 3000
(0.213) (±0.004) (0.240) (±0.004) (0.315) (±0.004) (0.217 (±0.004) (0.473) (±0.012) (0.014) (±0.002) (0.063) (±0.004)
LMIP5050****ATBS 5.40 ±0.10 6.10 ±0.10 8.00 ±0.10 5.50 ±0.10 12.0 ±0.30 0.35 ±0.05 1.60 ±0.10 13" 3000
(0.213) (±0.004) (0.240) (±0.004) (0.315) (±0.004) (0.217 (±0.004) (0.473) (±0.012) (0.014) (±0.002) (0.063) (±0.004)
LMIP5050****AT2S 5.60 ±0.10 6.00 ±0.10 8.00 ±0.10 5.50 ±0.10 12.0 ±0.30 0.35 ±0.05 2.10 ±0.10 13" 3000
(0.213) (±0.004) (0.236) (±0.004) (0.315) (±0.004) (0.217 (±0.004) (0.473) (±0.012) (0.014) (±0.002) (0.083) (±0.004)
LMIP7070****ATAS 6.95 ±0.10 7.40 ±0.10 12.0 ±0.10 7.50 ±0.10 16.0 ±0.30 0.35 ±0.05 1.50 ±0.10 13" 2500
(0.274) (±0.004) (0.291) (±0.004) (0.472) (±0.004) (0.295 (±0.004) (0.630) (±0.012) (0.014) (±0.002) (0.059) (±0.004)
LMIP7070****ATBS 7.00 ±0.10 7.50 ±0.10 12.0 ±0.10 7.50 ±0.10 16.0 ±0.30 0.35 ±0.05 1.70 ±0.10 13" 2000
(0.276) (±0.004) (0.295) (±0.004) (0.472) (±0.004) (0.295 (±0.004) (0.630) (±0.012) (0.014) (±0.002) (0.067) (±0.004)
LMIP7070****ATCS 6.95 ±0.10 7.45 ±0.10 12.0 ±0.10 7.50 ±0.10 16.0 ±0.30 0.35 ±0.05 2.10 ±0.10 13" 2000
(0.274) (±0.004) (0.293) (±0.004) (0.472) (±0.004) (0.295 (±0.004) (0.630) (±0.012) (0.014) (±0.002) (0.827) (±0.004)
LMIP7070****AT3S 7.60 ±0.10 7.60 ±0.10 12.0 ±0.10 7.50 ±0.10 16.0 ±0.30 0.40 ±0.05 3.60 ±0.10 13" 1500
(0.299) (±0.004) (0.299) (±0.004) (0.472) (±0.004) (0.295 (±0.004) (0.630) (±0.012) (0.016) (±0.002) (0.142) (±0.004)
LMIP7070****AT5S 6.90 ±0.10 7.50 ±0.10 12.0 ±0.10 7.50 ±0.10 16.0 ±0.30 0.40 ±0.05 5.30 ±0.10 13" 1000
(0.272) (±0.004) (0.295) (±0.004) (0.472) (±0.004) (0.295 (±0.004) (0.630) (±0.012) (0.016) (±0.002) (0.209) (±0.004)
mm (inches)
PT
B
A
K
WF
1.75±0.10
4.00±0.10
2.00±0.05
Ø1.00
Ø1.50+0.1
-0.0
PACKAGING SPECIFICATIONS – REEL DIMENSIONS
T2
2.0±0.50
21.0±0.80
13.0±0.50
T1
PD
Code 7" Reel 13" Reel
D 180±1.50 330±1.50
P 62.0±1.50 100±1.50
