4 Power Supplies Linear OEM - Single Output Applications * Microprocessor Circuits* Instrumentation * Process Controls* CNC Machinery * Control Circuits* Analog Circuits * Noise sensitive Circuits Specifications Parameter Condition Limit Input 104-127 Vac 208-254 Vac Input Voltage 50-60 Hz Input Frequency Output UL 601950-1 E137632 Features * Low noise output * 115/230 Vac input Regulation Line & Load 0.1% Pard (Ripple and Noise) 0.1% pk/pk Periodic Deviations (Ripple) 10mv rms Output Voltage Adjustment 5% Minimum Transient Recovery Time * Remote sensing 50%-100% Load Less than 50 msec General * Designed for both bench and rack use * Completely protected short circuit proof; automatic foldback. Storage Ambient Temp. -40C to +85C Operating Ambient Temp. 0C to +50C * Current limiting - automatic reset Temp. Effect Coefficient 0.03% C * Isolated floating output Polarity * UL Recognized, CSA Certified Short Circuit Protection * Built-in OVP on 5 Volt models * Terminal block on Case D models (24 V/6 A) * One year warranty Selection Table Maximum Allowable Lead Drop for Remote Sensing 5% Maximum Output Current 120% Rated Current Maximum Short Circuit Current 30% Rated Current Input/Output Isolation Catalog Number Output 1 Case 83-05-230-3 5 V @ 3.0 A B 83-12-218-3 12 V @ 1.8 A B 83-24-212-3 24 V @ 1.2 A B 83-24-225-3 24 V @ 2.5 A C 83-05-312-3 5 V @ 12 A D 83-12-310-3 12 V @ 10 A D 83-24-260-3 24 V @ 6 A D May be used positive or negative Protected with Automatic Recovery Cooling 1000 Megohms D.C., 2500 Vac Forced air. 20 CFM required for full rating Derate 30% without cooling Visit our website at www.solaheviduty.com or contact Technical Services at (800) 377-4384 with any questions. 141 4 Power Supplies Linear OEM Cases and Dimensions Case D Notes: All dimensions in inches (mm). Dimensions may change and should not be used for construction purposes. Case B When ordering, be sure to specify the complete part number. Orders may be placed with your local SolaHD distributor. Case C 142 Visit our website at www.solaheviduty.com or contact Technical Services at (800) 377-4384 with any questions.