K5BB112FAA - OTTO Engineering, Inc.

SEALED, ILLUMINATED ROCKER SWITCHES

104 OTTO Full Line Catalog Specifications Subject To Change Without Notice

SEALED

ROCKERS

ATTRACTIVE & RUGGED FOR WET & DUSTY ENVIRONMENTS

The OTTO K5 series is a quality, precision switch designed to

comply with standards established for appliance, marine (ignition

protection) and off-road vehicles along with other demanding

applications where rugged rocker switches are required.

K5 series sealed rocker switches snap into industry-standard

panel cutouts. Choose illuminated and printed legends, thru-panel

drain option and switching compatibility from low level up to 20 amps.

The K5 series offers a choice of LED, incandescent and neon

illumination. Legends can be stamped onto a non-illuminated

button, stamped onto an illuminated lens or laser etched into the

lens and backlit.

Available in standard and low level contact ratings, the K5

rockers will fit a wide range of applications. Expect a minimum

of 25,000 cycles at a full rated load of 20 amps resistive or

15 amps inductive. 100,000 cycles mechanical. A full complement

of switch operation is available including momentary and

maintained action in 2 or 3-position switches in SPST, SPDT,

SPTT, DPST and DPDT circuit arrangements.

OTTO can provide custom colors upon request. Value-added

assemblies with wire leads are also available. Please consult the

factory for assistance.

Features:

• Sealed watertight per IP68S

• Snap-in panel mounting into industry standard

panel cutout

• Optional panel seal gasket

• LED, neon & incandescent lighting

• 0.250" Quick Connect terminals

• Optional one-piece connector

• Optional terminal barriers

• Low level up to 20 amp switch

• Configurable Single Pole Triple Throw (SPTT)

with external jumpers

• Soft Touch rocker style available

• RoHS & WEEE compliant

Standard Characteristics/Ratings:

ELECTRICAL RATINGS:

Load Sea Level Sea Level

@ 28VDC, 60/400Hz @ 115VAC, 60/400Hz

Resistive 20A 16A

Inductive 15A 15A

Lamp 5A 5A

Motor 0.5HP @ 110VAC

DWV 1050Vrms except across light terminals

Low Level 10mA @ 30mV

Electrical Life: 25,000 cycles

LIGHTING:

Light Source Rating

Incandescent (VDC) 6V, 12V, 24V

Neon (VAC) 125V, 250V

LED (VDC) 2V, 6V, 12V, 24V

Mechanical Life: 100,000 cycles

Seal: IP68S

Operating Temp Range: -40°C to +85°C

MATERIALS:

Case: Thermoplastic

Button: Thermoplastic

Terminals/Contact: Brass, silver alloy with silver plate, gold flash for low level

Terminal Hardware: K5 series recommended Quick Connect terminals:

AMP 60253-2 for 12-16 AWG

AMP 42100-2 for 14-18 AWG

Mounting Hardware: None provided

Raised Bars Shown

SEALED, ILLUMINATED ROCKER SWITCHES

Specifications Subject To Change Without Notice www.ottoexcellence.com 105

ROCKER SWITCHES

SEALED

ROCKERS

SNAP-IN PANEL MOUNTING

Standard Legends Per SAE Specifications

For legends not shown, please consult an OTTO representative.

SEALED, ILLUMINATED ROCKER SWITCHES

106 OTTO Full Line Catalog Specifications Subject To Change Without Notice

SEALED

ROCKERS

SNAP-IN PANEL MOUNTING

Base Options Rocker Color*/Style Rocker Features Switch Action/Circuit Light Source Type Light Circuit

A. With Keying Pin Only

Standard Rating

Silver Plate

B. Without Barriers

or Pin

Standard Rating

Silver Plate

C. With Terminal

Barriers Only

Standard Rating

Silver Plate

D. With Keying Pin Only

Low Level Rating

Gold Plate

E. Without Barriers

or Pin

Low Level Rating

Gold Plate

F. With Terminal

Barriers Only

Low Level Rating

Gold Plate

G. With Keying Pin Only

Standard Rating

No Plate

H. Without Barrier

or Pin

Standard Rating

No Plate

J. With Terminal

Barriers Only

Standard Rating

No Plate

A. Black/Plastic Rocker

B. Black/Soft Touch Rocker

C. Red/Plastic Rocker

D. Red/Soft Touch Rocker

E. White/Plastic Rocker

F. White/Soft Touch Rocker

Position Position

“A” “C”

1. No Feature 1. No Feature

2. Lens 2. Lens

3. Raised Bars 3. Raised Bars

4. Raised Lit Bars 4. Raised Lit Bars

Position Position Position Circuit

“A” “B” “C”

1A. 3-4 None OFF SPST

2A. 3-4/8-9 None OFF DPST

1B. 3-4 None 3&2 SPDT

2B. 3-4/8-9 None 3-2/8-7 DPDT

1C. (3-4) None OFF SPST

2C. (3-4)/(8-9) None OFF DPST

1D. (3-4) None 3-2 SPDT

2D. (3-4)/(8-9) None 3-2/8-7 DPDT

1E. (3-4) OFF (3-2) SPDT

2E. (3-4)/(8-9) OFF (3-2)/(8-7) DPDT

1F. 3-4 OFF 3-2 SPDT

2F. 3-4/8-9 OFF 3-2/8-7 DPDT

1G. (3-4) OFF 3-2 SPDT

2G. (3-4)/(8-9) OFF 3-2/8-7 DPDT

Special Circuits

Position Position Position Special

“A” “B” “C” Circuits

1H. 3-4/8-9 3-2/8-9 OFF ON/ON/OFF

1J. 3-4/8-9 3-2/8-9 None ON/ON/None

1K. (3-4)/(8-9) 3-2/8-9 OFF (ON)/ON/OFF

1L. (3-4)/(8-9) 3-2/8-9 None (ON)/ON/None

1M. 3-4/8-9 3-2/8-9 3-2/7-8 ON/ON/ON

1N. (3-4)/(8-9) 3-2/8-9 3-2/7-8 (ON)/ON/ON

1P. (3-4)/(8-9) 3-2/8-9 (3-2)/(8-7) (ON)/ON/(ON)

2R. 3-4/8-9 OFF/8-9 OFF/OFF ON/OFF/OFF

ON/ON/OFF

2S. (3-4)/8-9 OFF/8-9 OFF/OFF (ON)/OFF/OFF

ON/ON/OFF

A. No Illumination

B. 6V Incandescent

C. 12V Incandescent

D. 24V Incandescent

E. 125VAC Neon

F. 250VAC Neon

G. 2V Red LED

H. 2V Green LED

J. 2V Amber LED

K. 6V Red LED

L. 6V Green LED

M.6V Amber LED

N. 12V Red LED

P. 12V Green LED

Q. 12V Amber LED

R. 24V Red LED

S. 24V Green LED

T. 24V Amber LED

Circuit Terminal

Connections

A. None None

B. Dep. in “A” 1(-) & 4(+)

C. Dep. in “C” 2(+) & 5(-)

D. Ind. in “A” 1(-) & 6(+)

E. Ind. in “C” 5(-) & 10(+)

F. Dep. in “A” 1(-) & 4(+)

Dep. in “C” 2(+) & 5(-)

G. Dep. in “A” 1(-) & 4(+)

Ind. in “C” 5(-) & 10(+)

H. Ind. in “A” 1(-) & 6(+)

Dep. in “C” 2(+) & 5(-)

J. Ind. in “A” 1(-) & 6(+)

Ind. in “C” 5(-) & 10(+)

*Additional colors available,

contact factory. NOTE: Soft Touch rockers

require same color lenses/

lit bars for both positions.

NOTE: All code combinations are not feasible.

Consult factory for product availability.

NOTE: Polarity only applies

to LED circuits.

K5 XX XX XX XX

NOTE: ( ) denotes momentary action.

K5 SERIES

SEALED, ILLUMINATED ROCKER SWITCHES

Specifications Subject To Change Without Notice www.ottoexcellence.com 107

ROCKER SWITCHES

SEALED

ROCKERS

ATTRACTIVE & RUGGED FOR WET & DUSTY ENVIRONMENTS

Lens Color Legend Style Legend Color Legend Orientation

Position “A” Position “C”

1. Transparent Red 1. Transparent Red

2. Transparent Green 2. Transparent Green

3. Transparent Amber ➀3. Transparent Amber ➀

4. Clear ➀4. Clear ➀

5. Translucent White ➁5. Translucent White ➁

Z. No Lens Z. No Lens

Position “A” Position “C”

ZZ. No Legend ZZ. No Legend

Position “A” Position “C”

1. Red 1. Red

2. Black 2. Black

9. White 9. White

B. Backlight/ B. Backlight/

Daylight White ➂Daylight White ➂

D. Backlight/ D. Backlight/

Deadfront ➂Deadfront ➂

Z. No Legend Z. No Legend

Position Position

“A” “C”

1. Std.

2. 90°

3. 180°

4. 270°

K5 Connector

P/N 801775-2A Without Latches

P/N 801775-2B With Latches

Recommended Quick Connect Terminals

AMP 60253-2 for 12-16 AWG

AMP 42100-2 for 14-18 AWG

Panel Seal Gasket

P/N 807109

➂Only available on Rocker Style “A”

& Rocker Features “1” and lens

color “Z” for each position.

NOTE: It is not recommended to use

green LEDs with translucent white

lenses. This will reduce light intensity.

Use clear lenses with green LEDs for

maximum light intensity.

➀Recommended for neon lamps.

➁Special Order: Ultra bright green

LEDs to be used with translucent

white lens.

NOTE: For all other legend options,

refer to the legend table, find the two

digit code and enter the code in the

appropriate position(s).

–X X XX XX XX X

SSTTOOPP HHEERREEfor

unlighted switches

without legends.

Example:

K5AA331BAA

SSTTOOPP HHEERREEfor

lighted switches

without legends.

Example:

K5AA331FNH-44

PART NUMBER CODE