Automotive Chip Choke(R) EMI Suppression for CAN-Bus Networks 2-Line Common Mode Chokes Meets AEC-Q200 Requirements Suppression of common mode noise without attenuating the signal Magnetically shielded versions for lower Rdc and higher current USB 3.0 and other high speed differential signal lines (IEEE1394, LVDS) Electrical Specifications @ 25C - Operating Temperature -40C to +125C Common Mode Impedance (10MHZ) Part Number Min Typ Inductance (uH) Standard Tolerance RDC ( Max) IDC (A MAX) PE-1812ACC110STS 300 600 11 +50/-30% 0.5 0.36 PE-1812ACC220STS 600 1200 22 +50/-30% 0.6 0.31 PE-1812ACC510STS 1500 3500 51 +50/-30% 1.0 0.23 PE-1812ACC101STS 3000 7500 100 +50/-30% 2.0 0.20 Weight ......................120 grams/reel Tape & Reel ..................150/reel Mechanical Schematic PE-1812ACCXXXSTS 3.0 max 3.20.2 4.50.2 3 1 4 3 3.8 ref 1 4 3.2 0.7 ref 5.9 USA 858 674 8100 Germany 49 7032 7806 0 1 Singapore 65 6287 8998 pulseelectronics.com Shanghai 86 21 62787060 1.6 2 3.4 0.65 ref 2 China 86 755 33966678 Taiwan 886 3 4356768 W717.B (11/15) All Units in mm Automotive Chip Choke(R) EMI Suppression for CAN-Bus Networks 2-Line Common Mode Chokes Temp vs DC Current Impedance vs Frequency PE-1812ACC110STS Differenal mode Common mode T@25 60.0 10,000 50.0 1,000 Differenal mode 100 10,000 30.0 50.0 20.0 10.0 0.0 10 0.1 1 10 100 Frequency(MHz) 1 0.1 10,000.0 1,000 Common mode Differenal mode 1 10 100 Frequency(MHz) 1,000 Common mode 0.0 60.0 Differenal mode 0.4 0.2 IDC(A) 0.6 0.8 T@25 0.4 0.6 IDC(A) 1.0 0.8 1.0 T@25 40.0 T() 10.0 1,000.0 60.0 30.0 50.0 20.0 40.0 T() 1.0 100.0 10.0 10.0 0.0 10 100 Frequency(MHz) 1.0 0.2 50.0 100.010,000.0 Impedance( ) 0.020.0 0.0 1,000.0 1 30.0 10.0 PE-1812ACC220STS 0.1 40.0 T( ) 100 1 Impedance( ) 60.0 1,000 Impedance () 10 T@25 40.0 T( ) Impedance () Common mode 1,000 30.0 0.020.0 0.2 0.4 IDC(A) 10.0 0.6 0.8 0.0 0.1 1 10 100 Frequency(MHz) 2 1,000 pulseelectronics.com 0.0 0.2 0.4 IDC(A) 0.6 0.8 W717.B (11/15) Automotive Chip Choke(R) EMI Suppression for CAN-Bus Networks 2-Line Common Mode Chokes Temp vs DC Current Impedance vs Frequency PE-1812ACC510STS 100,000.0 Common mode Differenal mode Common mode T@25 70.0 Differenal mode 100,000.0 10,000.0 50.0 60.0 T( ) T( ) Impedance() Impedance() 10,000.0 100.0 100.0 10.0 40.0 50.0 30.0 40.0 20.0 30.0 10.0 20.0 0.0 10.0 10.0 1.0 1 10 1 10 1.0 PE-1812ACC101STS 100 1,000 100 1,000 Frequency(MHz) Frequency(MHz) Common mode Common mode 0.0 0.1 0.2 0.3 0.4 IDC(A) 0.5 0.6 0.7 0.0 0.1 0.2 0.3 0.4 IDC(A) 0.5 0.6 0.7 0.0 Differenal mode T@25 100,000.0 60.0 Differenal mode T@25 100,000.0 10,000.0 60.0 50.0 50.0 40.0 10,000.0 1,000.0 T( ) T( ) Impedance() Impedance() T@25 60.0 70.0 1,000.0 100.0 100.0 10.0 40.0 30.0 30.0 20.0 20.0 10.0 10.0 1.0 1 10 100 1,000 1 10 100 1,000 1.0 3 pulseelectronics.com 10.0 0.0 0.00 0.0 0.00 0.10 0.20 0.10 0.20 IDC(A) IDC(A) 0.30 0.40 0.50 0.30 0.40 0.50 W717.B (11/15) Automotive Chip Choke(R) EMI Suppression for CAN-Bus Networks 2-Line Common Mode Chokes Reliability Test Item Reference documents 1. High Temperature Exposure MIL-STD-202 Method 108 Test Condition Test Specification 1. Temperature: 125C 2. Time: 96 hours 1. No mechanical and electrical damage 2. Inductance shall not change more than 30% 1. Temperature: 40C~125C 2. Number of cycles: 96 cycle 3.Dwell time: 30 minutes 1. No mechanical and electrical damage 2. Inductance shall not change more than 30% 2. Temperature Cycling JESD22 Method JA-104 3. Biased Humidity Test MIL-STD-202 Method 103 1. Temperature: 855C 2. Time: 96 hours 3. Humidity: 855% RH 1. No mechanical and electrical damage 2. Inductance shall not change more than 30% 4. Operational Life MIL-PRF-27 1. Temperature: 125C 2. Time: 96 hours 3. Apply rated current 1. No mechanical and electrical damage 2. Inductance shall not change more than 30% 5. External Visual MIL-STD-883 Method 2009 Inspect product construction, marking and workmanship Per product specification standard 6. Physical Dimensions JESD22 Method JB-100 Verify physical dimensions to the applicable product Per product specification standard detail specification 7. Resistance to solvents MIL-STD-202 Method 215 8. Vibration Test MIL-STD-202 Method 204 9. Resistance to Soldering Heat Test MIL-STD-202 Method 210 1. Temperature: 2505C 2. Time: (temp.217C) 60~150 Second 3. IR reflow times: 3 times 1. No mechanical and electrical damage 2. Inductance shall not change more than 30% 10. Rated Current MIL-STD-202 Method 330 Apply rated current for 5 seconds. 1. No mechanical and electrical damage 2. Inductance shall not change more than 30% 11. Temperature Rise MIL-PRF-27 Apply rated current for 10 minutes. 1. No mechanical and electrical damage 2. Inductance shall not change more than 30% 12. Over load MIL-PRF-27 Apply twice as rated current for 5 minutes. 1. No mechanical and electrical damage 2. Inductance shall not change more than 30% 13. Solderability Test J-STD-002 14. Electrical Characterization User Spec. 15. Withstanding Voltage Test MIL-STD-202 Method 201 Immerse into solvent for 30.5 minutes & brush 10 1. No body change in appearance times for their cycles. 2. No marking blurred. 3. Inductance shall not change more than 30% 1. Frequency and Amplified: 10-2000-10 Hz, 1.5mm 2. Direction: X, Y, Z 1. No mechanical and electrical damage 3. Test duration: 2 hours for each direction, 6 hours 2. Inductance shall not change more than 30% in total 1. Bakeing in pre-testing: 1555C / 16Hours30min. 2. Peak temperature: 2405C The terminal shall be at least 95% covered with fresh 3. Time: (temp.217C) 60~150 Second solder. 4. IR reflow times: 1 time 1. Operating temperature:-40C~125C 2. Room Temperature: 25C 1. No mechanical and electrical damage 2. Inductance shall not change more than 30% 1. DV: 500V 2. Time: 1 minute 1. During the test no breakdown. 2. The characteristic is normal after test. 16. Drop JESD22-B111 Package & Drop down from 1m. In 1 angle 1 ridge & 2 surfaces orientation 1. No case deformation or change in appearance. 2. Inductance shall not change more than 30% 17. Terminal Strength Test JIS-C-6429 1. Apply push force to samples mounted on PCB. 2. Force of 1.8 kg for 601 seconds. After test, inductors shall be on mechanical damge. 4 pulseelectronics.com W717.B (11/15) Automotive Chip Choke(R) EMI Suppression for CAN-Bus Networks 2-Line Common Mode Chokes Tape and Reel Specifications Reel Dimensions (mm) Series Parts per Reel A B C D E W P1 1812 ACC 500 178 60 13 17 14 12 2 Tape Dimensions (mm) P2 P3 8 4 H T 4 0.35 Recommended Solder Heat Resistance Profile III. Description: a. Ferrite drum core construction b. Magnetically shielded c. Enameled copper wire: H class d. Product weight: 0.15g (ref.) e. Moisture sensitivity Level 1 f. Products comply with RoHS' requirements g. Halogen Free available IV. General specification: a. Storage temp: -40Cto+125C b. Operating temp: -40Cto+125C (Temp. rise included) c. Resistance to solder heat: 250C 10 secs. For More Information Pulse Worldwide Headquarters 12220 World Trade Drive San Diego, CA 92128 U.S.A. Pulse Europe Einsteinstrasse 1 D-71083 Herrenberg Germany Pulse China Headquarters Pulse North China Pulse South Asia Pulse North Asia B402, Shenzhen Academy of Room 2704/2705 135 Joo Seng Road 3F, No. 198 Aerospace TechnolSuper Ocean Finance #03-02 Zhongyuan Road ogy Bldg. Ctr. PM Industrial Bldg. Zhongli City 10th Kejinan Road 2067 Yan An Road Singapore 368363 Taoyuan County 320 High-Tech Zone West Taiwan R. O. C. Nanshan District Shanghai 200336 Tel: 886 3 4356768 Shenzen, PR China China Tel: 65 6287 8998 Fax: 886 3 4356823 (Pulse) Tel: 858 674 8100 Tel: 49 7032 78060 518057 Fax: 65 6287 8998 Fax: 886 3 4356820 (FRE) Fax: 858 674 8262 Fax: 49 7032 7806 135 Tel: 86 755 33966678 Tel: 86 21 62787060 Fax: 86 755 33966700 Fax: 86 2162786973 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. (c) Copyright, 2015. Pulse Electronics, Inc. All rights reserved. 5 pulseelectronics.com W717.B (11/15) Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Pulse: PE-1812ACC220STS PE-1812ACC510STS PE-1812ACC110STS PE-1812ACC101STS