CLD-DS56 Rev 10G Product family data sheet Cree(R) XLamp(R) XP-E2 LEDs Product Description FEATURES The XLamp(R) XP-E2 LED builds on the unprecedented * performance of the original XP-E by increasing lumen output up white, royal blue, blue, green, PC amber, amber, red-orange to 20% while providing a single die LED point source for precise www.cree.com/Xlamp Available in white, outdoor white, 80-CRI, 85-CRI, 90-CRI & red optical control. The XPE2 LED shares the same footprint as the * ANSI-compatible chromaticity bins original XPE, providing a seamless upgrade path to more lumens * White binned at 85 C and/or greater efficiency while shortening the design cycle for * Maximum drive current: 1 A existing XP customers. * Low thermal resistance: as low as 5 C/W * Wide viewing angle: 110-135 XLamp XP-E2 LEDs are the ideal choice for lighting applications * Unlimited floor life at 30 C/85% RH where high light output and maximum efficacy are required, * Reflow solderable - JEDEC JSTD020C compatible such as LED retrofit lamps, outdoor, portable, indoor directional, * Electrically neutral thermal path emergency vehicle or architectural. * RoHS and REACh compliant * UL(R) recognized component (E349212) Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 XLamp (R) XP-E2 LED Table of Contents Characteristics........................................................................................................................................................................................................ 3 Flux Characteristics - White.................................................................................................................................................................................... 4 Flux Characteristics - Color.................................................................................................................................................................................. 10 Relative Spectral Power Distribution................................................................................................................................................................... 14 Relative Flux vs. Junction Temperature............................................................................................................................................................... 15 Electrical Characteristics - White......................................................................................................................................................................... 16 Electrical Characteristics - Color.......................................................................................................................................................................... 16 Relative Flux vs. Current - White........................................................................................................................................................................... 17 Relative Flux vs. Current - Color........................................................................................................................................................................... 17 Relative Chromaticity vs. Current and Temperature........................................................................................................................................... 18 Typical Spatial Distribution................................................................................................................................................................................... 19 Thermal Design..................................................................................................................................................................................................... 20 Performance Groups - Luminous Flux................................................................................................................................................................. 21 Performance Groups - Radiant Flux..................................................................................................................................................................... 21 Performance Groups - Chromaticity.................................................................................................................................................................... 22 Performance Groups - Dominant Wavelength.................................................................................................................................................... 25 Performance Groups - Forward Voltage.............................................................................................................................................................. 26 Cree's Standard Chromaticity Regions Plotted on the 1931 CIE Curve............................................................................................................. 27 Cree's Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions.......................................................................................... 28 Cree's Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions................................................................... 29 Cree's PC Amber Kit Plotted on the 1931 CIE Curve........................................................................................................................................... 30 Cree's 2200 K CCT White Kits Plotted on ANSI Standard Chromaticity Regions.............................................................................................. 31 Cree's Standard Chromaticity Kits....................................................................................................................................................................... 32 Bin and Order Code Formats................................................................................................................................................................................ 33 Reflow Soldering Characteristics......................................................................................................................................................................... 34 Notes..................................................................................................................................................................................................................... 35 Mechanical Dimensions....................................................................................................................................................................................... 37 Tape and Reel........................................................................................................................................................................................................ 38 Packaging.............................................................................................................................................................................................................. 39 Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 2 XLamp (R) XP-E2 LED Characteristics Characteristics Unit Thermal resistance, junction to solder point - white, royal blue, blue C/W 9 Thermal resistance, junction to solder point - green C/W 15 Thermal resistance, junction to solder point - PC amber C/W 9 Thermal resistance, junction to solder point - amber C/W 7 Thermal resistance, junction to solder point - red-orange, red C/W 5 Viewing angle (FWHM) - white degrees 110 Viewing angle (FWHM) - royal blue, blue, green degrees 135 Viewing angle (FWHM) - PC amber degrees 110 Viewing angle (FWHM) - amber, red-orange, red degrees 130 Temperature coefficient of voltage - white mV/C -2.3 Temperature coefficient of voltage - royal blue, blue mV/C -3.3 Temperature coefficient of voltage - green mV/C -3.8 Temperature coefficient of voltage - PC amber mV/C -2.5 Temperature coefficient of voltage - amber, red-orange, red mV/C -1.8 ESD withstand voltage (HBM per Mil-Std-883D)- white, royal blue, blue, green Typical V ESD classification (HBM per Mil-Std-883D) - PC amber, amber, red-orange, red DC forward current Minimum Maximum 8000 Class 2 mA 1000 Reverse voltage V 5 Forward voltage (@ 350 mA, 85 C) - white V 2.9 Forward voltage (@ 700 mA, 85 C) - white 3.05 Forward voltage (@ 1000 mA, 85 C) - white 3.15 Forward voltage (@ 350 mA, 25 C) - royal blue, blue V 3.1 Forward voltage (@ 1000 mA, 25 C) - royal blue, blue V 3.4 Forward voltage (@ 350 mA, 25 C) - green V 3.2 Forward voltage (@ 1000 mA, 25 C) - green V 3.7 Forward voltage (@ 350 mA, 25 C) - PC amber V 3.05 Forward voltage (@ 1000 mA, 25 C) - PC amber V 3.28 Forward voltage (@ 350 mA, 25 C) - amber, red-orange, red V 2.2 Forward voltage (@ 1000 mA, 25 C) - amber, red-orange, red V 2.65 LED junction temperature C 3.25 3.5 3.8 3.5 2.6 150 Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 3 XLamp (R) XP-E2 LED Flux Characteristics - White (TJ = 85 C) The following tables provide order codes for XLamp XP-E2 white LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 34). For definitions of the chromaticity kits, please see the Cree's Standard Chromaticity Kits section (page 33). Chromaticity Kit 51 53 50 E1 E2 CCT 6200 K 6000 K 6200 K 6500 K 5700 K Minimum Luminous Flux @ 350 mA Calculated Minimum Luminous Flux (lm)** @ 85 C Order Codes Code Flux (lm) @ 85 C Flux (lm) @ 25 C* 700 mA 1.0 A 70 CRI Typical R4 130 151 223 284 XPEBWT-L1-0000-00G51 R3 122 142 209 266 XPEBWT-L1-0000-00F51 R2 114 132 195 249 XPEBWT-L1-0000-00E51 Q5 107 124 183 233 XPEBWT-L1-0000-00D51 Q4 100 116 171 218 XPEBWT-L1-0000-00C51 XPEBWT-L1-0000-00G53 R4 130 151 223 284 R3 122 142 209 266 XPEBWT-L1-0000-00F53 R2 114 132 195 249 XPEBWT-L1-0000-00E53 XPEBWT-L1-0000-00D53 Q5 107 124 183 233 Q4 100 116 171 218 XPEBWT-L1-0000-00C53 R4 130 151 223 284 XPEBWT-L1-0000-00G50 R3 122 142 209 266 XPEBWT-L1-0000-00F50 R2 114 132 195 249 XPEBWT-L1-0000-00E50 Q5 107 124 183 233 XPEBWT-L1-0000-00D50 Q4 100 116 171 218 XPEBWT-L1-0000-00C50 R4 130 151 223 284 XPEBWT-L1-0000-00GE1 R3 122 142 209 266 XPEBWT-L1-0000-00FE1 R2 114 132 195 249 XPEBWT-L1-0000-00EE1 Q5 107 124 183 233 XPEBWT-L1-0000-00DE1 Q4 100 116 171 218 XPEBWT-L1-0000-00CE1 R4 130 151 223 284 XPEBWT-L1-0000-00GE2 R3 122 142 209 266 XPEBWT-L1-0000-00FE2 R2 114 132 195 249 XPEBWT-L1-0000-00EE2 Q5 107 124 183 233 XPEBWT-L1-0000-00DE2 Q4 100 116 171 218 XPEBWT-L1-0000-00CE2 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 36). * Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. ** Calculated flux values at 700 mA and 1 A are for reference only. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 4 XLamp (R) XP-E2 LED Flux Characteristics - White (TJ = 85 C) - Continued Chromaticity Kit E3 F4 E4 F5 E5 Z5 CCT 5000 K 4750 K 4500 K 4250 K 4000 K 4000 K Minimum Luminous Flux @ 350 mA Code Flux (lm) @ 85 C Flux (lm) @ 25 C* Calculated Minimum Luminous Flux (lm)** @ 85 C 700 mA Order Codes 1.0 A 70 CRI Typical R4 130 151 223 284 XPEBWT-01-0000-00GE3 R3 122 142 209 266 XPEBWT-01-0000-00FE3 XPEBWT-01-0000-00EE3 75 CRI Typical XPEBWT-L1-0000-00FE3 R2 114 132 195 249 Q5 107 124 183 233 XPEBWT-L1-0000-00DE3 Q4 100 116 171 218 XPEBWT-L1-0000-00CE3 XPEBWT-L1-0000-00EE3 R4 130 151 223 284 R3 122 142 209 266 XPEBWT-01-0000-00FF4 XPEBWT-L1-0000-00FF4 R2 114 132 195 249 XPEBWT-01-0000-00EF4 XPEBWT-L1-0000-00EF4 Q5 107 124 183 233 Q4 100 116 171 218 R4 130 151 223 284 XPEBWT-01-0000-00GF4 XPEBWT-L1-0000-00DF4 XPEBWT-L1-0000-00CF4 XPEBWT-01-0000-00GE4 R3 122 142 209 266 XPEBWT-01-0000-00FE4 XPEBWT-L1-0000-00FE4 R2 114 132 195 249 XPEBWT-01-0000-00EE4 XPEBWT-L1-0000-00EE4 Q5 107 124 183 233 XPEBWT-L1-0000-00DE4 Q4 100 116 171 218 XPEBWT-L1-0000-00CE4 R3 122 142 209 266 XPEBWT-01-0000-00FF5 R2 114 132 195 249 XPEBWT-01-0000-00EF5 XPEBWT-L1-0000-00EF5 Q5 107 124 183 233 XPEBWT-01-0000-00DF5 XPEBWT-L1-0000-00DF5 Q4 100 116 171 218 Q3 93.9 109 161 205 R3 122 142 209 266 80 CRI Minimum XPEBWT-L1-0000-00CF5 XPEBWT-L1-0000-00BF5 XPEBWT-01-0000-00FE5 R2 114 132 195 249 XPEBWT-01-0000-00EE5 XPEBWT-L1-0000-00EE5 XPEBWT-H1-0000-00EE5 Q5 107 124 183 233 XPEBWT-01-0000-00DE5 XPEBWT-L1-0000-00DE5 XPEBWT-H1-0000-00DE5 Q4 100 116 171 218 XPEBWT-L1-0000-00CE5 XPEBWT-H1-0000-00CE5 Q3 93.9 109 161 205 XPEBWT-L1-0000-00BE5 XPEBWT-H1-0000-00BE5 Q5 107 124 183 233 XPEBWT-L1-0000-00DZ5 XPEBWT-H1-0000-00DZ5 Q4 100 116 171 218 XPEBWT-L1-0000-00CZ5 XPEBWT-H1-0000-00CZ5 Q3 93.9 109 161 205 XPEBWT-L1-0000-00BZ5 XPEBWT-H1-0000-00BZ5 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 36). * Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. ** Calculated flux values at 700 mA and 1 A are for reference only. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 5 XLamp (R) XP-E2 LED Flux Characteristics - White (TJ = 85 C) - Continued Chromaticity Kit F6 E6 Z6 F7 CCT Minimum Luminous Flux @ 350 mA Calculated Minimum Luminous Flux (lm)** @ 85 C** Order Codes Code Flux (lm) @ 85 C Flux (lm) @ 25 C* 700 mA 1.0 A 70 CRI Typical R3 122 142 209 266 XPEBWT-010000-00FF6 R2 114 132 195 249 XPEBWT-010000-00EF6 XPEBWT-L10000-00EF6 Q5 107 124 183 233 XPEBWT-010000-00DF6 XPEBWT-L10000-00DF6 XPEBWT-H10000-00DF6 Q4 100 116 171 218 XPEBWT-L10000-00CF6 XPEBWT-H10000-00CF6 Q3 93.9 109 161 205 XPEBWT-L10000-00BF6 XPEBWT-H10000-00BF6 Q2 87.4 102 150 191 XPEBWT-L10000-00AF6 XPEBWT-H10000-00AF6 R3 122 142 209 266 XPEBWT-010000-00FE6 R2 114 132 195 249 XPEBWT-010000-00EE6 XPEBWT-L10000-00EE6 Q5 107 124 183 233 XPEBWT-010000-00DE6 XPEBWT-L10000-00DE6 XPEBWT-H10000-00DE6 Q4 100 116 171 218 XPEBWT-L10000-00CE6 XPEBWT-H10000-00CE6 Q3 93.9 109 161 205 XPEBWT-L10000-00BE6 XPEBWT-H10000-00BE6 Q2 87.4 102 150 191 XPEBWT-L10000-00AE6 XPEBWT-H10000-00AE6 Q5 107 124 183 233 XPEBWT-L10000-00DZ6 Q4 100 116 171 218 XPEBWT-L10000-00CZ6 XPEBWT-H10000-00CZ6 Q3 93.9 109 161 205 XPEBWT-L10000-00BZ6 XPEBWT-H10000-00BZ6 Q2 87.4 102 150 191 XPEBWT-L10000-00AZ6 XPEBWT-H10000-00AZ6 R2 114 132 195 249 XPEBWT-010000-00EF7 XPEBWT-L10000-00EF7 Q5 107 124 183 233 XPEBWT-010000-00DF7 XPEBWT-L10000-00DF7 XPEBWT-H10000-00DF7 Q4 100 116 171 218 XPEBWT-L10000-00CF7 XPEBWT-H10000-00CF7 Q3 93.9 109 161 205 XPEBWT-L10000-00BF7 XPEBWT-H10000-00BF7 Q2 87.4 102 150 191 XPEBWT-L10000-00AF7 XPEBWT-H10000-00AF7 3750 K 3500 K 3500 K 3250 K 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 36). * Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. ** Calculated flux values at 700 mA and 1 A are for reference only. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 6 XLamp (R) XP-E2 LED Flux Characteristics - White (TJ = 85 C) - Continued Chromaticity Kit E7 Z7 CCT Minimum Luminous Flux @ 350 mA Calculated Minimum Luminous Flux (lm)** @ 85 C** Code Flux (lm) @ 85 C Flux (lm) @ 25 C* 700 mA 1.0 A 70 CRI Typical 80 CRI Typical R2 114 132 195 249 XPEBWT-010000-00EE7 XPEBWT-L10000-00EE7 Q5 107 124 183 233 XPEBWT-010000-00DE7 XPEBWT-L10000-00DE7 XPEBWT-H10000-00DE7 Q4 100 116 171 218 XPEBWT-L10000-00CE7 XPEBWT-H10000-00CE7 Q3 93.9 109 161 205 XPEBWT-L10000-00BE7 XPEBWT-H10000-00BE7 Q2 87.4 102 150 191 XPEBWT-L10000-00AE7 XPEBWT-H10000-00AE7 P4 80.6 93.6 138 P3 73.9 85.8 P2 67.2 Q5 85 CRI Minimum 90 CRI Minimum XPEBWT-P10000-00AE7 XPEBWT-U1-000000AE7 176 XPEBWT-P10000-009E7 XPEBWT-U10000-009E7 127 161 XPEBWT-P10000-008E7 XPEBWT-U10000-008E7 78.0 115 147 XPEBWT-P10000-007E7 XPEBWT-U10000-007E7 107 124 183 233 XPEBWT-L10000-00DZ7 Q4 100 116 171 218 XPEBWT-L10000-00CZ7 XPEBWT-H10000-00CZ7 Q3 93.9 109 161 205 XPEBWT-L10000-00BZ7 XPEBWT-H10000-00BZ7 Q2 87.4 102 150 191 XPEBWT-L10000-00AZ7 XPEBWT-H10000-00AZ7 P4 80.6 93.6 138 176 XPEBWT-P10000-009Z7 XPEBWT-U10000-009Z7 P3 73.9 85.8 127 161 XPEBWT-P10000-008Z7 XPEBWT-U10000-008Z7 P2 67.2 78.0 115 147 XPEBWT-P10000-007Z7 XPEBWT-U10000-007Z7 3000 K 3000 K Order Codes 80 CRI Minimum XPEBWT-P10000-00AZ7 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 36). * Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. ** Calculated flux values at 700 mA and 1 A are for reference only. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 7 XLamp (R) XP-E2 LED Flux Characteristics - White (TJ = 85 C) - Continued Chromaticity Kit F8 E8 CCT Minimum Luminous Flux @ 350 mA Calculated Minimum Luminous Flux (lm)** @ 85 C** Order Codes Code Flux (lm) @ 85 C Flux (lm) @ 25 C* 700 mA 1.0 A Q5 107 124 183 233 XPEBWT-L10000-00DF8 Q4 100 116 171 218 XPEBWT-L10000-00CF8 XPEBWT-H10000-00CF8 Q3 93.9 109 161 205 XPEBWT-L10000-00BF8 XPEBWT-H10000-00BF8 Q2 87.4 102 150 191 XPEBWT-L10000-00AF8 XPEBWT-H10000-00AF8 XPEBWT-P10000-00AF8 P4 80.6 93.6 138 176 XPEBWT-L10000-009F8 XPEBWT-H10000-009F8 XPEBWT-P10000-009F8 XPEBWT-U10000-009F8 P3 73.9 85.8 127 161 XPEBWT-P10000-008F8 XPEBWT-U10000-008F8 P2 67.2 78 115 147 XPEBWT-P10000-007F8 XPEBWT-U10000-007F8 N4 62 72 106 135 XPEBWT-P10000-006F8 XPEBWT-U10000-006F8 Q5 107 124 183 233 XPEBWT-L10000-00DE8 Q4 100 116 171 218 XPEBWT-L10000-00CE8 XPEBWT-H10000-00CE8 Q3 93.9 109 161 205 XPEBWT-L10000-00BE8 XPEBWT-H10000-00BE8 Q2 87.4 102 150 191 XPEBWT-L10000-00AE8 XPEBWT-H10000-00AE8 P4 80.6 93.6 138 176 XPEBWT-L10000-009E8 XPEBWT-H10000-009E8 XPEBWT-P10000-009E8 XPEBWT-U10000-009E8 P3 73.9 85.8 127 161 XPEBWT-P10000-008E8 XPEBWT-U10000-008E8 P2 67.2 78 115 147 XPEBWT-P10000-007E8 XPEBWT-U10000-007E8 N4 62 72 106 135 XPEBWT-P10000-006E8 XPEBWT-U10000-006E8 2850 K 2700 K 70 CRI Typical 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 36). * Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. ** Calculated flux values at 700 mA and 1 A are for reference only. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 8 XLamp (R) XP-E2 LED Flux Characteristics - White (TJ = 85 C) - Continued Chromaticity Kit Z8 EA ZA CCT 2700 K 2200 K 2200 K Minimum Luminous Flux @ 350 mA Calculated Minimum Luminous Flux (lm)** @ 85 C** Order Codes Code Flux (lm) @ 85 C Flux (lm) @ 25 C* 700 mA 1.0 A Q4 100 116 171 218 XPEBWT-L10000-00CZ8 Q3 93.9 109 161 205 XPEBWT-L10000-00BZ8 XPEBWT-H10000-00BZ8 Q2 87.4 102 150 191 XPEBWT-L10000-00AZ8 XPEBWT-H10000-00AZ8 P4 80.6 93.6 138 176 XPEBWT-L10000-009Z8 XPEBWT-H10000-009Z8 P3 73.9 85.8 127 161 XPEBWT-P10000-008Z8 XPEBWT-U10000-008Z8 P2 67.2 78 115 147 XPEBWT-P10000-007Z8 XPEBWT-U10000-007Z8 N4 62 72 106 135 XPEBWT-P10000-006Z8 XPEBWT-U10000-006Z8 P3 73.9 85.8 127 161 XPEBWT-L10000-008EA XPEBWT-H10000-008EA P2 67.2 78 115 147 XPEBWT-L10000-007EA XPEBWT-H10000-007EA N4 62 72 106 135 XPEBWT-L10000-006EA XPEBWT-H10000-006EA P3 73.9 85.8 127 161 XPEBWT-L10000-008ZA XPEBWT-H10000-008ZA P2 67.2 78 115 147 XPEBWT-L10000-007ZA XPEBWT-H10000-007ZA N4 62 72 106 135 XPEBWT-L10000-006ZA XPEBWT-H10000-006ZA 70 CRI Typical 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum XPEBWT-P10000-009Z8 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 36). * Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values @ 25 C are calculated and for reference only. ** Calculated flux values at 700 mA and 1 A are for reference only. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 9 XLamp (R) XP-E2 LED Flux Characteristics - Color (TJ = 25 C) The following tables provide order codes for XLamp XP-E2 color LEDs. For a complete description of the order-code nomenclature, please see the Bin and Order Code Formats section (page 34). Color Minimum Radiant Flux @ 350 mA Group 30 31 32 33 Flux (mW) 450 475 500 525 Calculated Minimum PPF (mol/s) 1.71 1.80 1.90 1.99 Royal Blue 34 35 36 550 575 600 2.08 2.18 2.27 37 625 2.37 38 650 2.46 Dominant Wavelength (nm) Minimum Maximum Order Codes Group DWL (nm) Group DWL (nm) D3 450 D5 465 XPEBRY-L1-0000-00J01 D3 450 D4 460 XPEBRY-L1-0000-00J02 D4 455 D5 465 XPEBRY-L1-0000-00J03 D3 450 D5 465 XPEBRY-L1-0000-00K01 D3 450 D4 460 XPEBRY-L1-0000-00K02 D4 455 D5 465 XPEBRY-L1-0000-00K03 D3 450 D5 465 XPEBRY-L1-0000-00L01 D3 450 D4 460 XPEBRY-L1-0000-00L02 D4 455 D5 465 XPEBRY-L1-0000-00L03 D3 450 D5 465 XPEBRY-L1-0000-00M01 D3 450 D4 460 XPEBRY-L1-0000-00M02 D4 455 D5 465 XPEBRY-L1-0000-00M03 D3 450 D5 465 XPEBRY-L1-0000-00N01 D3 450 D4 460 XPEBRY-L1-0000-00N02 D4 455 D5 465 XPEBRY-L1-0000-00N03 D3 450 D5 465 XPEBRY-L1-0000-00P01 D3 450 D4 460 XPEBRY-L1-0000-00P02 D4 455 D5 465 XPEBRY-L1-0000-00P03 D3 450 D5 465 XPEBRY-L1-0000-00Q01 D3 450 D4 460 XPEBRY-L1-0000-00Q02 D4 455 D5 465 XPEBRY-L1-0000-00Q03 D3 450 D5 465 XPEBRY-L1-0000-00R01 D3 450 D4 460 XPEBRY-L1-0000-00R02 D3 450 D5 465 XPEBRY-L1-0000-00S01 D3 450 D4 460 XPEBRY-L1-0000-00S02 Note: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 36). * Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Calculated Photosynthetic Photon Flux (PPF) values are for reference only. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 10 XLamp (R) XP-E2 LED Flux Characteristics - Color (TJ = 25 C) - Continued Color Minimum Luminous Flux (lm) @ 350 mA Group Flux (lm) K2 30.6 K3 35.2 Blue M2 M3 39.8 45.7 Dominant Wavelength (nm) Minimum Maximum Order Codes Group DWL (nm) Group DWL (nm) B3 465 B6 485 XPEBBL-L1-0000-00Y01 B3 465 B5 480 XPEBBL-L1-0000-00Y02 B4 470 B5 480 XPEBBL-L1-0000-00Y05 B3 465 B6 485 XPEBBL-L1-0000-00Z01 B3 465 B5 480 XPEBBL-L1-0000-00Z02 B4 470 B5 480 XPEBBL-L1-0000-00Z05 B3 465 B6 485 XPEBBL-L1-0000-00201 B3 465 B5 480 XPEBBL-L1-0000-00202 B4 470 B5 480 XPEBBL-L1-0000-00205 B3 465 B6 485 XPEBBL-L1-0000-00301 B3 465 B5 480 XPEBBL-L1-0000-00302 B4 470 B5 480 XPEBBL-L1-0000-00305 Note: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 36). * Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Calculated Photosynthetic Photon Flux (PPF) values are for reference only. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 11 XLamp (R) XP-E2 LED Flux Characteristics - Color (TJ = 25 C) - Continued Color Minimum Luminous Flux (lm) @ 350 mA Group Flux (lm) Calculated Minimum PPF (mol/s) Q2 87.4 0.80 Q3 93.9 Q4 Green 0.86 100 Q5 0.91 107 R2 0.98 114 R3 1.04 122 R4 1.11 130 Color PC Amber 1.18 Color Bin Y2 Dominant Wavelength (nm) Minimum Maximum DWL (nm) Order Codes DWL (nm) Group G2 520 G4 535 XPEBGR-L1-0000-00A01 G2 520 G3 530 XPEBGR-L1-0000-00A02 G3 525 G4 535 XPEBGR-L1-0000-00A03 Group G2 520 G4 535 XPEBGR-L1-0000-00B01 G2 520 G3 530 XPEBGR-L1-0000-00B02 G3 525 G4 535 XPEBGR-L1-0000-00B03 G2 520 G4 535 XPEBGR-L1-0000-00C01 G2 520 G3 530 XPEBGR-L1-0000-00C02 G3 525 G4 535 XPEBGR-L1-0000-00C03 G2 520 G4 535 XPEBGR-L1-0000-00D01 G2 520 G3 530 XPEBGR-L1-0000-00D02 G3 525 G4 535 XPEBGR-L1-0000-00D03 G2 520 G4 535 XPEBGR-L1-0000-00E01 G2 520 G3 530 XPEBGR-L1-0000-00E02 G3 525 G4 535 XPEBGR-L1-0000-00E03 G2 520 G4 535 XPEBGR-L1-0000-00F01 G2 520 G3 530 XPEBGR-L1-0000-00F02 G3 525 G4 535 XPEBGR-L1-0000-00F03 G2 520 G4 535 XPEBGR-L1-0000-00G01 G2 520 G3 530 XPEBGR-L1-0000-00G02 G3 525 G4 535 XPEBGR-L1-0000-00G03 Minimum Luminous Flux (lm) @ 350 mA Order Codes Group Flux (lm) Q2 87.4 XPEBPA-L1-0000-00A01 Q3 93.9 XPEBPA-L1-0000-00B01 Q4 100 XPEBPA-L1-0000-00C01 Q5 107 XPEBPA-L1-0000-00D01 Note: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 36). * Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Calculated Photosynthetic Photon Flux (PPF) values are for reference only. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 12 XLamp (R) XP-E2 LED Flux Characteristics - Color (TJ = 25 C) - Continued Color Minimum Luminous Flux (lm) @ 350 mA Group Flux (lm) N4 62.0 P2 67.2 Amber P3 P4 Q2 73.9 80.6 87.4 Dominant Wavelength (nm) Minimum Maximum Order Codes Group DWL (nm) Group DWL (nm) A2 585 A3 595 XPEBAM-L1-0000-00601 A2 585 A2 590 XPEBAM-L1-0000-00602 A3 590 A3 595 XPEBAM-L1-0000-00603 A2 585 A3 595 XPEBAM-L1-0000-00701 A2 585 A2 590 XPEBAM-L1-0000-00702 A3 590 A3 595 XPEBAM-L1-0000-00703 A2 585 A3 595 XPEBAM-L1-0000-00801 A2 585 A2 590 XPEBAM-L1-0000-00802 A3 590 A3 595 XPEBAM-L1-0000-00803 A2 585 A3 595 XPEBAM-L1-0000-00901 A2 585 A2 590 XPEBAM-L1-0000-00902 A3 590 A3 595 XPEBAM-L1-0000-00903 A2 585 A3 595 XPEBAM-L1-0000-00A01 Note: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 36). * Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Calculated Photosynthetic Photon Flux (PPF) values are for reference only. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 13 XLamp (R) XP-E2 LED Flux Characteristics - Color (TJ = 25 C) - Continued Dominant Wavelength (nm) Minimum Luminous Flux (lm) @ 350 mA Color Group Flux (lm) P2 67.2 P3 Minimum 73.9 P4 80.6 RedOrange Q2 87.4 Q3 93.9 Q4 100 Q5 Color Minimum Luminous Flux (lm) @ 350 mA Group DWL (nm) O3 610 O4 620 XPEBRO-L1-0000-00701 O3 610 O3 615 XPEBRO-L1-0000-00702 O4 615 O4 620 XPEBRO-L1-0000-00703 O3 610 O4 620 XPEBRO-L1-0000-00801 O3 610 O3 615 XPEBRO-L1-0000-00802 O4 615 O4 620 XPEBRO-L1-0000-00803 O3 610 O4 620 XPEBRO-L1-0000-00901 O3 610 O3 615 XPEBRO-L1-0000-00902 O4 615 O4 620 XPEBRO-L1-0000-00903 O3 610 O4 620 XPEBRO-L1-0000-00A01 O3 610 O3 615 XPEBRO-L1-0000-00A02 O4 615 O4 620 XPEBRO-L1-0000-00A03 O3 610 O4 620 XPEBRO-L1-0000-00B01 O3 610 O3 615 XPEBRO-L1-0000-00B02 O3 615 O4 620 XPEBRO-L1-0000-00B03 O3 610 O4 620 XPEBRO-L1-0000-00C01 O3 610 O3 615 XPEBRO-L1-0000-00C02 O3 610 O4 620 XPEBRO-L1-0000-00D01 O3 610 O3 615 XPEBRO-L1-0000-00D02 Group Flux (lm) N3 56.8 1.48 62 1.61 P2 67.2 1.75 P3 73.9 1.92 P4 80.6 2.10 Order Codes Group Calculated Minimum PPF (mol/s) N4 Red 107 Maximum DWL (nm) Dominant Wavelength (nm) Minimum Maximum Order Codes Group DWL (nm) Group DWL (nm) R2 620 R3 630 XPEBRD-L1-0000-00501 R2 620 R2 625 XPEBRD-L1-0000-00502 R2 620 R3 630 XPEBRD-L1-0000-00601 R2 620 R2 625 XPEBRD-L1-0000-00602 R2 620 R3 630 XPEBRD-L1-0000-00701 R2 620 R2 625 XPEBRD-L1-0000-00702 R2 620 R3 630 XPEBRD-L1-0000-00801 R2 620 R2 625 XPEBRD-L1-0000-00802 R2 620 R3 630 XPEBRD-L1-0000-00901 R2 620 R2 625 XPEBRD-L1-0000-00902 Note: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. See the Measurements section (page 36). * Cree XLamp XP-E2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Calculated Photosynthetic Photon Flux (PPF) values are for reference only. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 14 XLamp (R) XP-E2 LED Relative Spectral Power Relative Spectral Power Distribution Relative Radiant Power (%) 100 90 80 70 60 Cool White 50 Warm White 40 30 20 10 0 380 430 480 530 580 630 680 730 780 Relative Spectral PowerWavelength (nm) 100 Relative Radiant Power (%) 80 Royal Blue Blue 60 Green PC Amber Amber 40 Red-Orange Red 20 0 380 430 480 530 580 630 680 730 780 Wavelength (nm) Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 15 XLamp (R) XP-E2 LED Relative Flux Output vs. Junction Temperature Relative Flux vs. Junction Temperature (IF = 350 mA) 120 Relative Luminous Flux (%) 100 80 White 60 40 20 Relative Flux Output vs. Junction Temperature 0 25 50 75 100 125 150 Junction Temperature (C) 100 Relative Radiant Flux (%) 90 80 70 60 50 Royal Blue 40 30 20 10 0 25 50 75 100 Relative Flux Output vs. Junction Temperature 125 150 Junction Temperature (C) 100 90 Relative Luminous Flux (%) 80 70 Blue 60 Green 50 PC Amber 40 Amber 30 Red-Orange, Red 20 10 0 25 50 75 100 125 150 Junction Temperature (C) Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 16 XLamp (R) XP-E2 LED Electrical Characteristics Electrical Characteristics (Tj = 25C) - White (TJ = 85 C) 1000 900 Forward Current (mA) 800 700 600 500 White 400 300 200 100 0 2.7 2.8 2.9 3.0 3.1 3.2 Forward Voltage (V) Electrical Characteristics (Tj = 85C) Electrical Characteristics - Color (TJ = 25 C) 1000 900 Forward Current (mA) 800 700 Royal Blue, Blue 600 Green 500 PC Amber 400 Amber, Red-Orange, Red 300 200 100 0 2.00 2.25 2.50 2.75 3.00 3.25 3.50 3.75 4.00 Forward Voltage (V) Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 17 XLamp (R) XP-E2 LED Relative Intensity vs. Current (Tj = 85C) Relative Flux vs. Current - White (TJ = 85 C) Relative Luminous Flux (%) 250 200 150 White 100 50 0 0 100 200 300 400 500 600 700 800 900 1000 Relative Intensity vs. Current (Tj = 25C) Forward Current (mA) Relative Flux vs. Current - Color (TJ = 25 C) Relative Radiant Flux (%) 250 200 150 Royal Blue 100 50 Relative 0Intensity vs. Current (Tj = 25C) 0 100 200 300 400 500 600 700 800 900 1000 Forward Current (mA) 300 Relative Luminous Flux (%) 250 200 Blue Green PC Amber 150 Amber Red-Orange, Red 100 50 0 0 100 200 300 400 500 600 700 800 900 1000 Forward Current (mA) Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 18 XLamp (R) XP-E2 LED Relative Chromaticity Vs. Current, WW Relative Chromaticity vs. Current and Temperature - Warm White* 0.020 T = 85 C J 0.015 0.010 0.005 CCx 0.000 CCy -0.005 -0.010 -0.015 -0.020 100 300 Relative0Chromaticity Vs.200 Temperature WW400 0.020 500 600 700 800 900 1000 Current (mA) I = 350 mA F 0.015 0.010 0.005 CCx 0.000 CCy -0.005 -0.010 -0.015 -0.020 0 25 50 75 100 125 150 Tsp (C) * Warm White XLamp XP-E2 LEDs have a typical CRI of 80. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 19 Typical Spatial Radiation Pattern XLamp (R) XP-E2 LED Typical Spatial Distribution Relative Luminous Intensity (%) 100 80 60 White 40 20 -90 -70 -50 -30 -10 0 10 30 50 70 90 Typical Spatial Radiation Pattern Angle () Relative Luminous Intensity (%) 100 80 60 Royal Blue, Blue, Green PC Amber Amber, Red-Orange, Red 40 20 -90 -70 -50 -30 -10 0 10 30 50 70 90 Angle () Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 20 XLamp (R) XP-E2 LED Thermal Design The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. Thermal Design - royal blue - same as blue 1200 1200 1000 1000 Maximum Current (mA) Maximum Current (mA) WhiteRoyal Blue, Blue 800 600 400 Rj-a = 10C/W Rj-a = 15C/W 200 0 Rj-a = 25C/W Thermal Design - green 20 40 600 400 Rj-a = 10C/W Rj-a = 15C/W 200 Rj-a = 20C/W 0 800 60 80 100 120 140 Ambient Temperature (C) 0 160 Rj-a = 20C/W Rj-a = 25C/W 0 20 40 Thermal Design - PC amber 60 80 100 120 140 160 140 160 Ambient Temperature (C) 1200 1200 1000 1000 Maximum Current (mA) Maximum Current (mA) GreenPC Amber 800 600 400 Rj-a = 20C/W Rj-a = 25C/W 200 0 20 600 400 Rj-a = 10C/W Rj-a = 15C/W 200 Rj-a = 30C/W Rj-a = 20C/W Rj-a = 25C/W Rj-a = 35C/W 0 800 0 40 60 80 100 120 140 Ambient Temperature (C) Thermal Design - amber 160 0 20 40 60 80 100 120 60 80 100 120 Ambient Temperature (C) Thermal Design - red-orange, red 1200 1200 1000 1000 Maximum Current (mA) Maximum Current (mA) AmberRed-Orange, Red 800 600 400 Rj-a = 10C/W Rj-a = 15C/W 200 0 20 600 400 Rj-a = 10C/W Rj-a = 15C/W 200 Rj-a = 20C/W Rj-a = 20C/W Rj-a = 25C/W Rj-a = 25C/W 0 800 0 40 60 80 Ambient Temperature (C) 100 120 140 160 0 20 40 Ambient Temperature (C) 140 160 Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 21 XLamp (R) XP-E2 LED Performance Groups - Luminous Flux XLamp XP-E2 LEDs (except royal blue) are tested for luminous flux and placed into one of the following luminousflux groups: Group Code Minimum Luminous Flux (lm) @ 350 mA Maximum Luminous Flux (lm) @ 350 mA K2 30.6 35.2 K3 35.2 39.8 M2 39.8 45.7 M3 45.7 51.7 N2 51.7 56.8 N3 56.8 62.0 N4 62.0 67.2 P2 67.2 73.9 P3 73.9 80.6 P4 80.6 87.4 Q2 87.4 93.9 Q3 93.9 100 Q4 100 107 Q5 107 114 R2 114 122 R3 122 130 R4 130 139 Performance Groups - Radiant Flux (TJ = 25 C) XLamp XP-E2 royal blue LEDs are tested for radiant flux and placed into one the following bins: Group Minimum Radiant Flux (mW) @ 350 mA Maximum Radiant Flux (mW) @ 350 mA 30 (J) 450 475 31 (K) 475 500 32 (L) 500 525 33 (M) 525 550 34 (N) 550 575 35 (P) 575 600 36 (Q) 600 625 37 (R) 625 650 38 (S) 650 675 39 (T) 675 700 Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 22 XLamp (R) XP-E2 LED Performance Groups - Chromaticity White XLamp XP-E2 LEDs are tested for chromaticity and placed into one of the regions defined by the bounding coordinates on the following pages. Region 0A 0R 1A 1R 2A 2R 3A 3R 4A x y 0.2950 0.2970 0.2920 0.3060 0.2984 0.3133 0.3009 0.3042 0.2980 0.2950 0.3009 0.3042 0.3037 0.3048 0.3130 0.3290 0.3144 0.3186 0.3068 0.3068 0.3144 0.3186 0.3161 0.3059 0.3093 0.2993 0.3215 0.3290 0.3290 0.3300 0.3222 0.3222 0.3290 0.3300 0.3290 0.3180 0.3231 Region x y 0.2920 0.3060 x y 0.2984 0.3133 0.2895 0.3135 0.2962 0.3220 0.2962 0.3220 0.2984 0.3133 0.3028 0.3304 0.3048 0.3207 0.2880 0.2895 0.2970 0.2870 0.3135 0.2962 0.3210 0.2937 0.2937 0.3312 0.3005 0.3415 0.2937 0.2962 0.3207 0.3028 0.3220 0.3028 0.3304 0.3115 0.3115 0.3391 0.3130 0.3290 0.3205 0.3481 0.3213 0.3373 0.3113 0.3048 0.3113 0.3005 0.3207 0.3130 0.3415 0.3099 0.3099 0.3509 0.3196 0.3602 0.3115 0.3391 0.3028 0.3304 0.3205 0.3481 0.3115 0.3391 0.3350 0.3207 0.3417 0.3290 0.3462 0.3290 0.3538 0.3376 0.3290 0.3417 0.3371 0.3490 0.3243 0.3215 0.3243 0.3196 0.3350 0.3290 0.3602 0.3290 0.3290 0.3690 0.3290 0.3538 0.3381 0.3762 0.3376 0.3616 0.3120 0.3207 0.3462 0.3290 0.3371 0.3490 0.3451 0.3554 0.3376 0.3616 0.3463 0.3687 0.3440 0.3427 0.3366 0.3369 0.3451 0.3554 0.3371 0.3490 0.3366 0.3369 0.3381 0.3762 0.3440 0.3428 0.3429 0.3307 0.3480 0.3840 0.3463 0.3687 0.3361 0.3530 0.3245 0.3376 0.3616 0.3597 0.3548 0.3736 0.3615 0.3659 0.3641 0.3804 0.3590 0.3521 0.3512 0.3465 0.3615 0.3659 0.3530 0.3597 0B 0S 1B 1S 2B 2S 3B 3S 4B Region 0C 0T 1C 1T 2C 2T 3C 4C Region x y 0.2984 0.3133 0.3048 0.3207 0.3068 0.3113 0.3009 0.3042 0.3220 0.3037 0.2937 0.3312 0.3009 0.3042 0.3068 0.3113 0.3304 0.3093 0.2993 0.3391 0.3130 0.3290 0.3213 0.3373 0.3221 0.3261 0.3290 0.3144 0.3186 0.3509 0.3144 0.3186 0.3221 0.3261 0.3231 0.3120 0.3161 0.3059 0.3538 0.3290 0.3417 0.3616 0.3371 0.3490 0.3366 0.3369 0.3417 0.3290 0.3300 0.3690 0.3290 0.3300 0.3366 0.3369 0.3361 0.3245 0.3538 0.3290 0.3180 0.3463 0.3687 0.3451 0.3554 0.3551 0.3760 0.3533 0.3620 0.3533 0.3620 0.3515 0.3487 0.3451 0.3554 0.3440 0.3427 0.3641 0.3804 0.3615 0.3659 0.3736 0.3874 0.3702 0.3722 0.3702 0.3722 0.3670 0.3578 0.3615 0.3659 0.3590 0.3521 0D 0U 1D 1U 2D 2U 3D 4D Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 23 XLamp (R) XP-E2 LED Performance Groups - Chromaticity (continued) Region 5A1 5B1 5C1 5D1 6A1 6B1 6C1 6D1 7A1 7B1 x y 0.3670 0.3578 0.3686 0.3649 0.3744 0.3685 0.3726 0.3702 0.3719 0.3797 0.3782 0.3837 0.3763 0.3760 Region x y 0.3686 0.3649 0.3702 0.3722 0.3763 0.3760 0.3612 0.3744 0.3722 0.3719 0.3736 0.3874 0.3802 0.3916 0.3782 0.3837 5A2 5B2 Region x y 0.3744 0.3685 0.3763 0.3760 0.3825 0.3798 0.3685 0.3804 0.3797 0.3782 0.3802 0.3916 0.3869 0.3958 0.3847 0.3877 5A3 5B3 Region x y 0.3726 0.3612 0.3744 0.3685 0.3804 0.3721 0.3721 0.3783 0.3646 0.3837 0.3763 0.3760 0.3782 0.3837 0.3847 0.3877 0.3825 0.3798 5A4 5B4 0.3825 0.3798 0.3847 0.3877 0.3912 0.3917 0.3887 0.3836 0.3847 0.3877 0.3869 0.3958 0.3937 0.4001 0.3912 0.3917 0.3912 0.3917 0.3937 0.4001 0.4006 0.4044 0.3978 0.3958 0.3887 0.3836 0.3912 0.3917 0.3978 0.3958 0.3950 0.3875 0.3783 0.3646 0.3804 0.3721 0.3863 0.3758 0.3840 0.3681 0.3804 0.3721 0.3825 0.3798 0.3887 0.3836 0.3863 0.3758 0.3863 0.3758 0.3887 0.3836 0.3950 0.3875 0.3924 0.3794 0.3840 0.3681 0.3863 0.3758 0.3924 0.3794 0.3898 0.3716 0.3889 0.3690 0.3915 0.3768 0.3981 0.3800 0.3953 0.3720 0.3915 0.3768 0.3941 0.3848 0.4010 0.3882 0.3981 0.3800 0.3981 0.3800 0.4010 0.3882 0.4080 0.3916 0.4048 0.3832 0.3953 0.3720 0.3981 0.3800 0.4048 0.3832 0.4017 0.3751 0.3941 0.3848 0.3968 0.3930 0.4040 0.3966 0.4010 0.3882 0.3968 0.3930 0.3996 0.4015 0.4071 0.4052 0.4040 0.3966 0.4040 0.3966 0.4071 0.4052 0.4146 0.4089 0.4113 0.4001 0.4010 0.3882 0.4040 0.3966 0.4113 0.4001 0.4080 0.3916 0.4080 0.3916 0.4113 0.4001 0.4186 0.4037 0.4150 0.3950 0.4113 0.4001 0.4146 0.4089 0.4222 0.4127 0.4186 0.4037 0.4186 0.4037 0.4222 0.4127 0.4299 0.4165 0.4259 0.4073 0.4150 0.3950 0.4186 0.4037 0.4259 0.4073 0.4221 0.3984 0.4017 0.3751 0.4048 0.3832 0.4116 0.3865 0.4082 0.3782 0.4048 0.3832 0.4080 0.3916 0.4150 0.3950 0.4116 0.3865 0.4116 0.3865 0.4150 0.3950 0.4221 0.3984 0.4183 0.3898 0.4082 0.3782 0.4116 0.3865 0.4183 0.3898 0.4147 0.3814 0.4147 0.3814 0.4183 0.3898 0.4242 0.3919 0.4203 0.3833 0.4183 0.3898 0.4221 0.3984 0.4281 0.4006 0.4242 0.3919 0.4242 0.3919 0.4281 0.4006 0.4342 0.4028 0.4300 0.3939 0.4203 0.3833 0.4242 0.3919 0.4300 0.3939 0.4259 0.3853 0.4221 0.3984 0.4259 0.4073 0.4322 0.4096 0.4281 0.4006 0.4259 0.4073 0.4299 0.4165 0.4364 0.4188 0.4322 0.4096 0.4322 0.4096 0.4364 0.4188 0.4430 0.4212 0.4385 0.4119 0.4281 0.4006 0.4322 0.4096 0.4385 0.4119 0.4342 0.4028 5C2 5D2 6A2 6B2 6C2 6D2 7A2 7B2 5C3 5D3 6A3 6B3 6C3 6D3 7A3 7B3 5C4 5D4 6A4 6B4 6C4 6D4 7A4 7B4 Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 24 XLamp (R) XP-E2 LED Performance Groups - Chromaticity (continued) Region 7C1 7D1 8A1 8B1 8C1 8D1 AA1 AB1 AC1 AD1 x y Region x y 0.4385 0.4119 0.4342 0.4028 0.4385 0.4119 0.4449 0.4141 0.4430 0.4212 0.4496 0.4236 0.4403 0.4259 0.4049 0.4449 0.3853 0.4300 0.4300 0.3939 0.4342 0.4028 0.4359 0.3960 0.4316 0.3873 0.4403 0.4049 0.4359 0.3960 0.4373 0.4418 0.3893 0.4418 0.3981 0.4465 0.4475 0.3994 0.4428 0.3906 0.4523 0.4085 0.4475 0.3994 0.4465 0.4071 0.4513 0.4164 0.4513 0.4164 0.4573 0.4178 0.4562 0.4260 0.4624 0.4274 0.4523 0.4085 0.4573 0.4178 0.4634 0.4193 0.4582 0.4099 0.4582 0.4099 0.4634 0.4193 0.4695 0.4207 0.4641 0.4112 0.4634 0.4193 0.4687 0.4289 0.4750 0.4304 0.4695 0.4207 0.4695 0.4207 0.4750 0.4304 0.4813 0.4319 0.4756 0.4221 0.4641 0.4112 0.4695 0.4207 0.4756 0.4221 0.4700 0.4126 0.4483 0.3919 0.4532 0.4008 0.4589 0.4021 0.4538 0.3931 0.4532 0.4008 0.4582 0.4099 0.4641 0.4112 0.4589 0.4021 0.4589 0.4021 0.4641 0.4112 0.4700 0.4126 0.4646 0.4034 0.4538 0.3931 0.4589 0.4021 0.4646 0.4034 0.4593 0.3944 0.4822 0.3973 0.4884 0.4067 0.4942 0.4066 0.4879 0.3972 0.4884 0.4067 0.4946 0.4162 0.5006 0.4160 0.4942 0.4066 0.4942 0.4066 0.5006 0.4160 0.5066 0.4158 0.5001 0.4064 0.4879 0.3972 0.4942 0.4066 0.5001 0.4064 0.4936 0.3970 0.4946 0.4162 0.5008 0.4256 0.5069 0.4254 0.5006 0.4160 0.5008 0.4256 0.5070 0.4350 0.5133 0.4348 0.5069 0.4254 0.5069 0.4254 0.5133 0.4348 0.5196 0.4346 0.5131 0.4252 0.5006 0.4160 0.5069 0.4254 0.5131 0.4252 0.5066 0.4158 0.5066 0.4158 0.5131 0.4252 0.5192 0.4250 0.5126 0.4156 0.5131 0.4252 0.5196 0.4346 0.5258 0.4343 0.5192 0.4250 0.5192 0.4250 0.5258 0.4343 0.5321 0.4341 0.5253 0.4248 0.5126 0.4156 0.5192 0.4250 0.5253 0.4248 0.5186 0.4154 0.4936 0.3970 0.5001 0.4064 0.5059 0.4062 0.4993 0.3969 0.5001 0.4064 0.5066 0.4158 0.5126 0.4156 0.5059 0.4062 0.5059 0.4062 0.5126 0.4156 0.5186 0.4154 0.5118 0.4061 0.4993 0.3969 0.5059 0.4062 0.5118 0.4061 0.5050 0.3967 7C2 7D2 8A2 8B2 8C2 8D2 AA2 AB2 AC2 AD2 Region x y 0.4449 0.4141 0.4496 0.4236 0.4562 0.4260 0.4141 0.4513 0.3939 0.4359 0.4403 0.4049 0.4465 0.4071 0.4418 0.3981 0.3981 0.4475 0.4071 0.4523 0.4582 0.4099 0.4532 0.4008 0.4573 0.4178 0.4624 0.4274 0.4687 0.4289 7C3 7D3 8A3 8B3 8C3 8D3 AA3 AB3 AC3 AD3 Region x y 0.4403 0.4049 0.4449 0.4141 0.4513 0.4164 0.4164 0.4465 0.4071 0.3960 0.4316 0.3873 0.4359 0.3960 0.4418 0.3981 0.4373 0.3893 0.3994 0.4428 0.3906 0.4085 0.4475 0.3994 0.4532 0.4008 0.4483 0.3919 0.4523 0.4085 0.4573 0.4178 0.4634 0.4193 7C4 7D4 8A4 8B4 8C4 8D4 AA4 AB4 AC4 AD4 Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 25 XLamp (R) XP-E2 LED Performance Groups - Chromaticity (continued) XLamp XP-E2 PC amber LEDs are placed into the region defined by the following bounding coordinates. Region Y2 x y 0.5469 0.4249 0.5700 0.4100 0.5900 0.4100 0.5610 0.4390 Performance Groups - Dominant Wavelength Color XLamp XP-E2 LEDs are tested for dominant wavelength (DWL) and sorted into one of the DWL bins defined below. Color Royal Blue Blue Green Amber Red-Orange Red DWL Group Minimum DWL (nm) @ 350 mA Maximum DWL (nm) @ 350 mA D3 450 455 D4 455 460 D5 460 465 B3 465 470 B4 470 475 B5 475 480 B6 480 485 G2 520 525 G3 525 530 G4 530 535 A2 585 590 A3 590 595 O3 610 615 O4 615 620 R2 620 625 R3 625 630 Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 26 XLamp (R) XP-E2 LED Performance Groups - Forward Voltage Amber, red-orange and, red XLamp XP-E2 LEDs are tested for forward voltage and sorted into one of the forward voltage bins defined below. Forward Voltage Group Minimum Forward Voltage (V) @ 350 mA Maximum Forward Voltage (V) @ 350 mA B 1.75 2.0 C 2.0 2.25 D 2.25 2.5 E 2.5 2.75 F 2.75 3.0 G 3.0 3.25 H 3.25 3.5 J 3.5 3.75 Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 27 XLamp (R) XP-E2 LED Cree's Standard Chromaticity Regions Plotted on the 1931 CIE Curve ANSI Cool White 0.40 5000 K 0.39 5700 K 0.38 3S 0.37 6500 K 2T 0.36 2C 1T 0.35 CCy 3B 2S 8000 K 0T 0.33 0C 0B 0.31 2D 1C 3R 2A 1B 0S 0.32 3A 2B 1S 0.34 1D 2R 1A 0D 2U ANSI C78.377A 1U 1R 0A 0U 0.30 0R 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx ANSI Neutral White and ANSI Warm White 0.46 0.45 2700 K 3000 K 0.44 0.43 3500 K 0.42 4000 K CCy 0.41 6C2 6B3 0.40 6B2 5C3 0.39 5B3 5C4 5B4 0.38 5B1 4C 0.37 4D 3B 5D2 6D4 7A1 7A4 7A3 7D1 7D2 7D4 7D3 8A1 8B1 7C4 8A3 8A2 8A4 8D1 8B3 8B2 8B4 8D2 8C2 8C1 8C3 8C4 8D3 8D4 6D1 6A4 5D4 6A1 5D1 ANSI C78.377A 5A4 3C 0.36 6A2 7A2 6D3 6D2 6A3 5D3 5A3 5A2 4B 6B1 5C1 5B2 6C1 6B4 5C2 5000 K 7C1 7B4 7B1 6C4 7C2 7B3 7B2 6C3 4500 K 7C3 5A1 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 28 XLamp (R) XP-E2 LED Cree's Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions 0.40 0.40 5000 K 0.39 0.38 3S 51 6500 K 0.36 8000 K 0T 0C 0D 0A 0S 0.32 0.31 1R 0C 0B 1R 0.30 0.29 0.28 0.36 0.35 0.34 0.33 0.32 0.28 0.31 0.28 0.30 0.29 CCx 0.36 0R 0R 0.29 1U 0U 0.30 0.29 0.28 ANSI C78.377A 2R 1A 0D 0A 0U 2U 1D 0.35 0.30 1U 3R 2A 1B 0.34 0.31 ANSI C78.377A 2R 1A 2D 1C 0.33 0B 0T 0.33 2U 1D 3A 2B 1S 0.32 0S 0.32 3R 2A 1B 0.34 0.31 0.33 3B 2C 1T 8000 K 3A 2D 1C 3S 2T 2S 0.35 2B 1S 0.36 3B CCy 0.34 53 6500 K 2C 1T 5700 K 0.37 2T 2S 0.35 CCy 0.38 5700 K 0.37 5000 K 0.39 CCx 0.40 5000 K 0.39 0.38 5700 K 6500 K 0.36 2T 3B 2S 0.35 2C 1T 8000 K 0.34 CCy 3S 50 0.37 0T 0.33 0S 0.32 0.31 0C 3R 2A 1D 2U ANSI C78.377A 2R 1A 1U 0D 0A 2D 1C 1B 0B 3A 2B 1S 1R 0U 0.30 0R 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx 0.40 0.40 5000 K 0.39 0.38 0.38 5700 K 3S 0.37 6500 K 1T 0T 0.33 0S 0.32 0C 8000 K 0.34 0T ANSI C78.377A 2R 1U 0S 0.32 1R 0.31 0U 0.30 0C 0A 2U ANSI C78.377A 2R 1U 1R 0U 0.30 0R 3R 2A 1D 1A 0D 2D 1C 1B 0B 3A 2B 1S 0.33 2U 2C 1T 3R 2A 1D 1A 0D 0A 2D 1C 1B 0B 0.31 3A 2B 1S 3B 2S 0.35 0R 0.29 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.36 0.35 0.34 0.28 0.29 CCx 0.33 0.32 0.31 0.30 0.29 0.28 0.28 0.28 CCy 2C 3S 2T 0.36 3B 2S 8000 K 0.34 6500 K 2T E1 0.35 5700 K E2 0.37 CCy 0.36 5000 K 0.39 CCx Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 29 XLamp (R) XP-E2 LED Cree's Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions 0.46 0.45 2700 K 3000 K 0.44 0.43 0.42 4000 K 0.41 E6 4500 K E5 0.40 CCy E7 3500 K 5000 K 0.39 0.38 E3 0.37 0.36 5B4 4C 4B 3C 4D 3B 6B2 5C3 5C2 5B1 5D2 5A3 5D4 6A1 5A2 5D1 5A4 5A1 6D2 6A3 5D3 6A2 6A4 6D1 7A4 7A1 6D4 7D1 8B2 8B3 8C1 8B4 8C2 8C3 8C4 8D3 8D2 8D4 8A4 8D1 8A1 7D4 8A3 8A2 7D3 7D2 7A3 7A2 6D3 8B1 7C4 7C1 7B4 7B1 6C4 6C1 6B4 5C4 6B1 5C1 5B2 6C2 6B3 5B3 E4 6C3 7C2 7B3 7B2 7C3 E8 ANSI C78.377A 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx 0.46 0.45 2700 K 3000 K 0.44 0.43 3500 K 0.42 4000 K 0.41 4500 K CCy 0.40 F5 5000 K 0.39 F4 0.38 0.37 4B 3C 0.36 4D 3B 5B3 5C4 5C1 5B4 5D3 6A2 5B1 5D2 5A3 5D4 6A1 5A2 5D1 5A4 5A1 6C2 6B3 6B4 6B1 6A3 6A4 7B2 6C3 6B2 5C3 5C2 5B2 4C F6 F7 6C1 6D2 6D1 7B1 6C4 6D3 6D4 7A2 7A1 7A4 F8 7A3 7D1 7C2 7B3 7B4 7C1 7D4 8B1 7C4 7D3 7D2 7C3 8A1 8A2 8A3 8B2 8B3 8B4 8D2 8C1 8C2 8C3 8C4 8D3 8D4 8A4 8D1 ANSI C78.377A 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 30 XLamp (R) XP-E2 LED Cree's Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions Continued 0.46 0.45 2700 K 3000 K 0.44 0.43 0.42 Z6 4000 K 0.41 Z5 4500 K 0.40 CCy Z7 3500 K 5C3 5000 K 0.39 5C2 5B3 0.38 4C 0.37 4B 3C 0.36 4D 3B 6C1 6B4 6A3 5B4 5D3 6A2 5D2 6A4 5A3 5D4 6A1 5A2 5D1 5A4 5A1 5B1 6D2 6D1 7B1 6C4 6B2 5C4 6B1 5C1 5B2 6C2 6B3 6D3 6D4 7A2 7A4 7A1 7B3 7B2 6C3 7C1 7B4 7A3 7D1 7C2 7D4 8B1 7C4 7D3 7D2 7C3 8A1 8A2 8A3 8B2 Z8 8B3 8B4 8D2 8C1 8C2 8C3 8C4 8D3 8D4 8A4 8D1 ANSI C78.377A 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx Cree's PC Amber Kit Plotted on the 1931 CIE Curve 0.46 0.45 CCy 0.44 Y2 0.43 0.42 0.41 0.61 0.60 0.59 0.58 0.57 0.56 0.55 0.54 0.53 0.40 CCx Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 31 XLamp (R) XP-E2 LED Cree's 2200 K CCT White Kits Plotted on ANSI Standard Chromaticity Regions 0.45 0.44 3000 K 0.43 0.42 8B1 7C4 CCy 0.41 8A3 8A2 7D3 0.40 8D1 8A4 8A1 8B3 8B2 7C3 7C2 8B4 8D2 8C1 8C2 EA 2450 K 2700 K 2200 K AB2 AB3 AC2 AB4 AC1 AC4 8C3 AB1 AC3 8C4 AA2 AA3 AD2 AD3 8D3 AA1 AA4 AD1 8D4 AD4 0.39 0.38 0.37 0.53 0.54 0.55 0.53 0.54 0.55 0.52 0.51 0.50 0.49 0.48 0.47 0.46 0.45 0.44 0.36 CCx 0.45 0.44 3000 K 0.43 0.42 CCy 8B1 7C4 0.41 0.40 7C3 7C2 7D3 8A1 8A3 8A2 8A4 8D1 8B3 8B2 8B4 8D2 8C1 8C2 ZA 2450 K 2700 K 2200 K AB2 AB3 AC2 AB4 AC1 AC4 8C3 AB1 AC3 8C4 AA2 AA3 AD2 AD3 8D3 AA1 AA4 AD1 8D4 AD4 0.39 0.38 0.37 0.52 0.51 0.50 0.49 0.48 0.47 0.46 0.45 0.44 0.36 CCx Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 32 XLamp (R) XP-E2 LED Cree's Standard Chromaticity Kits The following table provides the chromaticity bins associated with chromaticity kits. Color Cool White Neutral White Warm White CCT Kit Chromaticity Bins 6200 K 51 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S 6000 K 53 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S 6200 K 50 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D 6500 K E1 1A, 1B, 1C, 1D 5700 K E2 2A, 2B, 2C, 2D 5000 K E3 3A, 3B, 3C, 3D 4750 K F4 3C, 3D, 4A, 4B 4500 K E4 4A, 4B, 4C, 4D 4250 K F5 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4 4000 K E5 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4 4000 K Z5 5A3, 5B4, 5C1, 5D2 3750 K F6 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4 3500 K E6 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4 3500 K Z6 6A3, 6B4, 6C1, 6D2 3250 K F7 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4 3000 K E7 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4 3000 K Z7 7A3, 7B4, 7C1, 7D2 2850 K F8 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 2700 K E8 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 2700 K Z8 8A3, 8B4, 8C1, 8D2 2200 K EA AA1, AA2, AA3, AA4, AB1, AB2, AB3, AB4, AC1, AC2, AC3, AC4, AD1, AD2, AD3, AD4 2200 K ZA AA3, AB4, AC1, AD2 Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 33 XLamp (R) XP-E2 LED Bin and Order Code Formats XP-E2 bin codes and order codes are configured in the following manner: Order Code Bin Code Series XPE = XP-E Series XPE = XP-E Color specification 01 = Outdoor White L1 = Standard CRI H1 = 80 CRI minimum P1 = 85 CRI minimum U1 = 90 CRI minimum Color specification 01 = Outdoor White L1 = Standard CRI H1 = 80 CRI minimum P1 = 85 CRI minimum U1 = 90 CRI minimum Kit Number Luminous or radiant flux group SSSCCC-BD-HHHH-NNNNN Internal code Color BWT = Gen 2 White BRY = Gen 2 Royal Blue BBL = Gen 2 Blue BGR = Gen 2 Green BPA = Gen 2 PC Amber BAM = Gen 2 Amber BRO = Gen 2 Red-Orange BRD = Gen 2 Red Internal code SSSCCC-BD-WWW-FF-G-AA Voltage performance group (amber, red-orange, red) Chromaticity bin or dominant-wavelength group Color BWT = Gen 2 White BRY = Gen 2 Royal Blue BBL = Gen 2 Blue BGR = Gen 2 Green BPA = Gen 2 PC Amber BAM = Gen 2 Amber BRO = Gen 2 Red-Orange BRD = Gen 2 Red Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 34 XLamp (R) XP-E2 LED Reflow Soldering Characteristics In testing, Cree has found XLamp XP-E2 LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used, and therefore it is the lamp or luminaire manufacturer's responsibility to determine applicable soldering requirements. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. tP TP Critical Zone TL to TP Temperature Ramp-up TL tS Tsmax Tsmin Ramp-down ts Preheat 25 t 25C to Peak IPC/JEDEC J-STD-020C Time Profile Feature Average Ramp-Up Rate (Tsmax to Tp) Lead-Free Solder 1.2 C/second Preheat: Temperature Min (Tsmin) 120 C Preheat: Temperature Max (Tsmax) 170 C Preheat: Time (tsmin to tsmax) Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) Peak/Classification Temperature (Tp) 65-150 seconds 217 C 45-90 seconds 235 - 245 C Time Within 5 C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 - 6 C/second Time 25 C to Peak Temperature 4 minutes max. Note: All temperatures refer to topside of the package, measured on the package body surface. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 35 XLamp (R) XP-E2 LED Notes Measurements The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree's control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended or provided as specifications. PreRelease Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree's pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree's lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp XP-E2 LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of 30 C/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs in the original MBP. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Ecology section of the Cree website. REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 36 XLamp (R) XP-E2 LED Notes - Continued UL(R) Recognized Component This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750. Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 37 XLamp (R) XP-E2 LED 66 55 NOTICE NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY Mechanical Dimensions UNAUTHORIZED PERSON THE WITHOUT WRITTEN CONSENT UNAUTHORIZED PERSON THE WITHOUT WRITTEN CONSENT OF CREE INC. OF CREE INC. 44 33 Thermal vias, if present, are not shown on these drawings. 3.30 3.30 .50.50 All measurements are .13 mm unless otherwise indicated. DD 3.45 3.45 2.30 2.30 2.26 2.26 .50.50 .73.73 Anode 6 5 6 5 NOTICE NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OPTICAL OPTICAL CREE CONFIDENTIAL. PLOT AND INFORMATION CONTAINED THIS WITHIN ARE THETHE PROPRIETARY ANDREFERENCE REFERENCE CONTAINED WITHIN ARE INFORMATION THE PROPRIETARY AND INC. THIS CONFIDENTIAL OF CREE, PLOT CONFIDENTIAL INFORMATION CREE, INC. THIS PLOT MAY NOT BE COPIED,OF REPRODUCED OR DISCLOSED TO ANY MAY NOTUNAUTHORIZED BE COPIED, REPRODUCED OR DISCLOSED TO ANY PERSON THE WITHOUT WRITTEN CONSENT UNAUTHORIZED PERSON THE WITHOUT WRITTEN CONSENT OF CREE INC. 3.45 3.45 OF CREE INC. 4 4 REV 3.30 3.30 D 4 Y D 4 3 3.45 3.45 REV OPTICAL OPTICAL REFERENCE REFERENCE CC Top View 3.30 2.26 .73 3.45 3.45 2.26 2.30 .50 .73 OPTICAL OPTICAL REFERENCE REFERENCE C C 3 3.30 .50 2.30 .50 2 2.26 R1.53 R1.53 REV 2 1 2.26 REVISONS REVISONS DESCRIPTION .73 .73DESCRIPTION .58.58 BY 12.30 .50 1.30 1.30 PRIMARY PRIMARY 3.30 REF. 3.30 REF. Cathode Cathode R1.53 .50.50 Electrically neutral thermal pad 3.30 D .50.50 .50.50 3.30 .64.64 .58 .58 1.30 3.30 1.30 REF. 3.30 REF. .58 3.30 3.30 3.30 3.30 .58 1.30 1.30 Bottom View .50 PRIMARY .50 PRIMARY .50 .50 3.30 3.30 B 3.30 .50 3.30 .64 .75.75 .64 ALL DIM ALL DIME 3.30 3.30 RECOMMENDED STENCIL PATTERN RECOMMENDED STENCIL PATTERN (HATCHED AREA OPENING) (HATCHED AREA IS IS OPENING) .75 3.30 3.30 3.30 3.30 .25 .25.25 3.30 3.30 .64 RECOMMENDED PCB SOLDER PAD RECOMMENDED PCB SOLDER PAD 66 C .64 2.30 2.30 AA .50 .50 ALTERNATIVE ALTERNATIVE 1.01 1.01 1.30 1.30 B C Alternate Bottom View .50 PRIMARY Electrically neutral thermal pad Anode Anode 3 3.30 D R1.53 PRIMARY BB .50 2.30 .50 .50 BY DATE APP'D DATE APP'D Side View OPTICAL OPTICAL REFERENCE REFERENCE .50 3 3 1.30 .25 1.30 5 5 Recommended PCB Solder Pad 1.01 1.01 2.30 3.30 44 2.30 UNLES UNLESS DIM DIME MILLIM MILLIMET .25 TOLER .25 TOLERAN .X .X X THIRD ANGLE PROJECTION THIRD ANGLE PROJECTION FOR S FOR SHE .75 .X .X B .X B X SURF SURFAC 33 ALL DIME ALL DIMENSIONS ARE 3.30 Recommended Stencil Pattern RECOMMENDED STENCIL PATTERN (Hatched Area is PATTERN Open) RECOMMENDED STENCIL UNLESS UNLESS OTHERWISE DIMEN DIMENSIONS ARE MILLIMET MILLIMETERS AND AF .75 (HATCHED AREA IS OPENING) TOLERAN (HATCHED AREA IS OPENING) TOLERANCE UNLESS .X RECOMMENDED PCB SOLDER PAD Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark.XX of .25 .X RECOMMENDED PCB SOLDERinPAD .XXX .125X (R) Cree, Inc. UL and the UR logo are registered trademarks of UL LLC. THIRD ANGLE PROJECTION X FOR .5SHE THIRD ANGLE PROJECTION FOR SHEET METAL.X P 1.01 ALL DIMENSIONS ARE .13MM UNLESS OTHERWISE NOTED 1.01 .X 1.5 .X 38 ALL DIMENSIONS ARE .13MM UNLESS OTHERWISE NOTED 2.30 .XX .75 .X 2.30 .XXX .25 X X .5 3.30 A A .75 0 .0 5 Y 5 E1 1.7 Do DETAIL B SCALE 2 : 1 F(III) REF XLamp (R)4.375 XP-E2BoLED REF 4.375 Bo R 0.2 TYPICAL Ko X X Tape and Reel D1 1.5 MIN. SECTION Y-Y RE R 0.2 TYPICAL All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. Y Ko P1 D1 1.5 MIN. SECTION Y-Y REF 0.59 Y FR 2.2 Ao All dimensions in mm. 4 1.5 5 Do REF Po 4.0 0.1 (II) P2 2.0 0.05 (I) 0 .0 4.375 CATHODE SIDE Y 5 Bo SECTION X-X 1.5.1 4.0.1 1.75.10 .0 X 3.70 2.40 5.50 8.00 12.00 +/- 0.1 +0.0/-0.1 +/- 0.05 3.70 +/- 0.1 Bo Ko F 3.70 2.40 5.50 8.00 12.00 +/- 0.1 +0.0/-0.1 +/- 0.05 +/- 0.1 +0.3/-0.1 2.5.1 Measured from centerline of sprocket hole (I) (II) ANODE SIDE Ao Ao P1 W W Cathode Side P1 (III) REF 0.59 4 P1 W +/- 0.1 2.2 Bo Y Ko D1 +.3 1.5 MIN. F 12.0 3.70 FR SECTION Y-Y Ao F(III) 8.0.1 X RE R 0.2 TYPICAL Ko E1 1.75 0.1 T 0.30 0.05 (IV) +/- 0.1 +0.3/-0.1 to centerline of pocket. Cumulative tolerance of 10 sprocket holes is 0.20. Measured from centerline of sprocket hole to centerline of pocket. Other material available. Anode Side by + and circle) (denoted SECTION X-X User Feed Direction END Ao (I) 3.70 +/- 0.1 (II) 3.70 +/- 0.1 2.40 +0.0/-0.1 5.50 +/- 0.05 6 8.00 P1 +/- 0.1 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE +0.3/-0.1 INFORMATION W 12.00 CONTAINED WITHIN ARE THE PROPRIETARY AND Bo Ko F (III) (IV) 5 4 Trailer 160mm (min) of empty pockets sealed with tape (20 pockets min.) D 6 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT O190 OF CREE, INC. 3 2 OE Foxit PDF Editor a1/4aeEEuO (c) by Foxit Software Company, 2004 1/2oOAOUAEAA Loaded Pockets (1,000 Lamps) CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE, INC. 5 4 1 Leader 400mm (min) of empty pockets with at least 100mm sealed by tape (50 empty pockets min.) 2 3 OE Foxit PDF Editor a1/4aeEEuO (c) by Foxit Software Company, 2004 1/2oOAOUAEAA 16.40 START Measured from centerline of sprocket hole to centerline of pocket. Cumulative tolerance of 10 sprocket holes is 0.20. Measured from centerline of sprocket hole to centerline of pocket. Other material available. D 1 User Feed Direction Cover Tape D C D C 16.40 O190 O61 0.5 Pocket Tape OD 7.5 C 12.40 +2.00 0 MEASURED AT HUB '' C B B 13mm O13 O61 0.5 7" OD 7.5 '' 12.40 MEASURED AT INSIDE EDGE 12.40 +2.00 0 MEASURED AT HUB Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of B Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. B A UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS & BEFORE FINISH. TOLERANCE UNLESS SPECIFIED: .X 0.3 .XX .13 O13 THIRD ANGLE PROJECTION X 1 DRAWN BY LIUDEZHI DATE 2012/5/25 CHECK DATE APPROVED DATE Phone (919) 361-4770 A TITLE MATERIAL 39 4600 Silicon Drive Durham, N.C 27703 Reel, 7" x 12mm Wide XLamp (R) XP-E2 LED Packaging Unpackaged Reel Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag Label CREE Binwith Code Cree Bin & Barcode LabelLot # Code, Qty, Label with Cree Bin Code, Quantity, Reel ID Label with Cree Bin Label with Customer P/N, Qty,Qty, Lot #, Lot PO # # Code, Packaged Reel Patent Label Label with Customer Order Label with Cree Order Code, Code, Qty, Reel ID, PO # Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Boxed Reel Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Patent Label (on bottom of box) Copyright (c) 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and XLamp(R) are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL(R) and the UR logo are registered trademarks of UL LLC. 40 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Cree, Inc.: XPEBWT-01-0000-00CC1 XPEBWT-01-0000-00CC3 XPEBWT-01-0000-00CD1 XPEBWT-01-0000-00CD2 XPEBWT-01-0000-00DC1 XPEBWT-01-0000-00DC2 XPEBWT-01-0000-00DC3 XPEBWT-01-0000-00DD1 XPEBWT01-0000-00DD2 XPEBWT-01-0000-00EC1 XPEBWT-01-0000-00EC2 XPEBWT-01-0000-00ED2 XPEBWT-01-000000FC1 XPEBWT-01-0000-00FC3 XPEBWT-01-0000-00FD2 XPEBWT-01-R250-00CC3 XPEBWT-01-R250-00CD1 XPEBWT-01-R250-00CD2 XPEBWT-01-R250-00DC1 XPEBWT-01-R250-00DC2 XPEBWT-01-R250-00DD1 XPEBWT-01-R250-00DD2 XPEBWT-01-R250-00EC1 XPEBWT-01-R250-00EC2 XPEBWT-01-R250-00EC3 XPEBWT-01-R250-00ED1 XPEBWT-01-R250-00ED2 XPEBWT-01-R250-00FC1 XPEBWT-01-R250-00FD1 XPEBWT-01-R250-00FD2 XPEBWT-H1-0000-009E8 XPEBWT-H1-0000-009F8 XPEBWT-H1-0000-009Z8 XPEBWTH1-0000-00AE7 XPEBWT-H1-0000-00AE8 XPEBWT-H1-0000-00AF6 XPEBWT-H1-0000-00AF8 XPEBWT-H1-000000AZ6 XPEBWT-H1-0000-00AZ7 XPEBWT-H1-0000-00AZ8 XPEBWT-H1-0000-00BE5 XPEBWT-H1-0000-00BE6 XPEBWT-H1-0000-00BF6 XPEBWT-H1-0000-00BZ5 XPEBWT-H1-0000-00BZ6 XPEBWT-H1-0000-00CE5 XPEBWT-H1-0000-00CF6 XPEBWT-H1-0000-00CZ5 XPEBWT-H1-0000-00DE5 XPEBWT-H1-R250-009E6 XPEBWT-H1-R250-009E7 XPEBWT-H1-R250-009E8 XPEBWT-H1-R250-009F6 XPEBWT-H1-R250-009F7 XPEBWT-H1-R250-009F8 XPEBWT-H1-R250-009Z7 XPEBWT-H1-R250-00AE5 XPEBWT-H1-R250-00AE6 XPEBWT-H1-R250-00AE7 XPEBWT-H1-R250-00AE8 XPEBWT-H1-R250-00AF8 XPEBWT-H1-R250-00AZ5 XPEBWT-H1-R250-00AZ6 XPEBWT-H1-R250-00AZ8 XPEBWT-H1-R250-00BE5 XPEBWT-H1-R250-00BE6 XPEBWT-H1-R250-00BE7 XPEBWT-H1-R250-00BZ7 XPEBWT-H1-R250-00CE6 XPEBWT-H1-R250-00CF6 XPEBWT-H1-R250-00CZ5 XPEBWT-H1-R250-00DE5 XPEBWT-L1-0000-009A9 XPEBWT-L1-0000-009AA XPEBWT-L1-0000-009E8 XPEBWT-L1-0000-009F8 XPEBWT-L1-0000-00AA5 XPEBWT-L1-0000-00AA6 XPEBWTL1-0000-00AA7 XPEBWT-L1-0000-00AA8 XPEBWT-L1-0000-00AA9 XPEBWT-L1-0000-00AAA XPEBWT-L1-000000AE6 XPEBWT-L1-0000-00AE7 XPEBWT-L1-0000-00AF6 XPEBWT-L1-0000-00AF8 XPEBWT-L1-0000-00AZ6 XPEBWT-L1-0000-00AZ7 XPEBWT-L1-0000-00BA6 XPEBWT-L1-0000-00BA7 XPEBWT-L1-0000-00BA8 XPEBWTL1-0000-00BA9 XPEBWT-L1-0000-00BAA XPEBWT-L1-0000-00BE5 XPEBWT-L1-0000-00BE6 XPEBWT-L1-000000BE7 XPEBWT-L1-0000-00BF5 XPEBWT-L1-0000-00BF7 XPEBWT-L1-0000-00BF8 XPEBWT-L1-0000-00BZ5