CCF chip fuse EU features circuit protection * Surface mount fuse suitable for primary and secondary circuits * Ceramic case provides excellent mechanical strength * Suitable for flow and reflow soldering * Marking: White body color with black marking * Products with lead-free terminations meet EU RoHS and China RoHS requirements dimensions and construction Dimensions inches (mm) W t W L t Type L CCF .236.008 (6.00.2) .098.008 (2.50.2) d .098.008 (2.50.2) .055.008 (1.40.2) d End Cap d Ceramic Fuse Case Element ordering information New Part # CCF 1 N Type Style Characteristic N: Normal blow 1 T Rated Current Reference rating chart Termination Material T: Sn TE Packaging TE: 4mm pitch embossed plastic (1,000 pieces/reel) For further information on packaging, please refer to Appendix A. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 180 2/13/08 KOA Speer Electronics, Inc. * Bolivar Drive * P.O. Box 547 * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com CCF chip fuse Part Designation Current Rating CCF1N0.4 CCF1N0.5 CCF1N0.63 CCF1N0.8 CCF1N1 CCF1N1.25 CCF1N1.6 CCF1N2 CCF1N2.5 CCF1N3.15 CCF1N4 CCF1N5 CCF1N6.3 NEW NEW Voltage Rating 400mA 500mA 630mA 800mA 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A 6.3A Operating Temperature Range MITI AC 100V -55C to +125C UL and CSA AC 125V DC 60V Fusing Characteristics Interrupting Capacity Internal R. (m) Max. Normal Melting l2t (A2, seconds) 650 510 390 250 90.4 75.9 59.3 42.9 36.6 26 20.1 15.3 11.4 0.024 0.030 0.052 0.125 0.156 0.220 0.513 0.814 1.31 2.37 3.85 6.5 10.6 Rated Current Fusing Time MITI AC 100V 100A MITI 130% 160% 200% 4 hour min. 1 hour max. 1 second max. UL and CSA AC 125V 50A DC 60V 50A UL and CSA 100% 200% 4 hour min. 1 second max. CCF1N7 7A 10.5 12.8 CCF1N8 CCF1N10 CCF1N12 8A 10A 12A 9.5 7.5 4.5 17.0 27.7 73.5 CCF1N15 15A 3.5 125.5 UL (c-UL) AC 65V DC 65V UL (c-UL) AC 65V 50A DC 65V 50A UL (c-UL) 100% 200% 4 hour min. 60 seconds max. environmental applications 10 -35 -15 5 25 45 65 85 105 125 Ambient Temperature (C) 0.4 0.5 0.63 0.8 1 1.25 1.6 2 2.5 3.15 4 5 6.3 7 8 10 12 15 1.5 1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 -55 Fusing Characteristics Fusing Time (Sec.) Derating Coefficient Number Derating Curve 1 .1 .01 .001 0.1 1 10 100 Fusing Current (A) Performance Characteristics Parameter Fusing Time Surface Temperature Rise Bending Test Resistance to Solder Heat Solderability Load Life Moisture Resistance Temperature Cycling Requirement Within specified time, no restrike Maximum temperature rise 140C (rated current x 115%) Maximum temperature rise 75C (rated current x 100%) No mechanical damages R: 10% 95% coverage minimum R: 10% R: 10% R: 10% Test Method Fusing time measured under rated current x 160% and x 200% Surface temperature should be measured by passing current Width of holding point: 90mm, Bending: 3mm, 1 time 260C 5C, 10 seconds 0.5 seconds 235C 5C, 3 seconds 0.5 seconds 70C 2C, 1000 hours, rated current x 70%, 1.5 hr ON, 0.5 hr OFF cycle 40C 2C, 90 - 95% RH, rated current x 70%, 1.5 hr ON, 0.5 hr OFF cycle -55C (30 minutes)/+125C (30 minutes) cycle Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 2/13/08 KOA Speer Electronics, Inc. * Bolivar Drive * P.O. Box 547 * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com 181 circuit protection applications and ratings