31-Mar.-2016 Ver1.0
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
WYSACVLXY-XX
Software Embedded WLAN Module
IEEE802.11b/g/n
WYSACVLXY-XX
Data Sheet
31-Mar.-2016 Ver1.0
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
WYSACVLXY-XX
ATTENTION: This module has an API (Application Programming Interface) Specification that is
under Japan export control. Depending on the customers country and application (e.g.
weapons), Taiyo Yuden may not be able to provide the API Specification to all customers. Please
contact your local Taiyo Yuden sales office for additional information.
To contact your local sales office and for additional product information, please visit
www.ty-top.com.
31-Mar.-2016 Ver1.0
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
WYSACVLXY-XX
Document constituent list
Control name
Control No.
Document Page
General Items
HD-AG-A150096
1/2 - 2/2
Absolute maximum ratings
HD-AM-A150096
1/1
Electrical characteristics
HD-AE-A150096
1/4 - 4/4
Circuit schematic
HD-MC-A150096
1/2 - 2/2
Outline / Appearance
HD-AD-A150096
1/5 - 5/5
Pin Layout
HD-BA-A150096
1/3 - 3/3
Reflow profile
1/1
Software Specification
1/8 8/8
Rev. record
19-Jan.-2016> Ver.0.1 Release tentative version
19-Feb.-2016>Ver.0.2
Revised Electrical characteristics Revised power consumption
Revised Outline/Appearance Added indications of shield case
18-Mar.-2016>Ver.0.21
Revised description of cover page
24-Mar.-2016>Ver.0.9 Official release Candidate
Revised description of cover page
31-Mar.2016>Ver.1.0 Official release
31-Mar.-2016 Ver1.0
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
WYSACVLXY-XX
Control No.
HD-AG-A150096 (1/2)
Control name
General Items
Scope
This specification (“Specification”) applies to the hybrid IC for use Wireless LAN module (“Product”)
manufacture by TAIYO YUDEN Co., Ltd. (“TAIYO YUDEN”)
1. Part Number: WYSACVLXY-XX
2. Function: Radio frequency transfer Module. (IEEE802.11b/g/n standard conformity)
3. Structure: Hybrid IC loaded with silicon monolithic and GaAs semiconductor
Ability of lead free mounting at customer's assembly (Heat resistance of this Product) : Yes
Containment of hazardous substance in this Product
*This product conforms to RoHS Directive (2011/65/EU).
4. Outline: 44-pin leadless chip carrier
5. Marking: Japan ID, IC ID, FCC ID, Manufacture, Model, Lot number, Part number
6. Features:
-IEEE802.11b/g/n standard conformity
Transmit speed: WLAN11n (72.2/65/58.5/57.8/52/43.3/39/28.9/26/21.7/19.5/14.4/13.0/7.2/6.5),
WLAN11g (54/48/36/24/18/12/9/6Mbps), WLAN11b (11/5.5/2/1 Mbps),
Channel Number: 1 to 11 channel
Host interface: UART
Built-in WLAN front end, Flash Memory, Xtal, Power circuits
Embedded TAIYO YUDEN standard application software
7. Security: WPA-2 using AES/CCMP along with legacy security features
8. Packing:
Packaging method: Tray
Packaging unit: 84pcs/Tray
840pcs/Box
9. Notes:
a. Any question arising from this Specification shall be solved through mutual discussion by the
parties hereof.
b. This Product is not designed for radiation durable and should not be used under the circumstance
of radiation.
c. The operating conditions of this Product are as shown in this Specification. Please note that
TAIYO YUDEN shall not be liable for a failure and/or abnormality which is caused by use under
the conditions other than the operating conditions hereof.
d. This Product mentioned in this Specification is manufactured for use in consumer products.
Before using this Product in any special equipment (such as medical equipment, space
equipment, air craft, disaster prevention equipment), where higher safety and reliability are duly
required, the applicability and suitability of this Product must be fully evaluated by the customer at
its sole risk to ensure correct and safety operation of those special equipments. Also, evaluation
of the safety function of this Product even for use in general electronics equipment shall be
thoroughly made and when necessary, a protective circuit shall be added at design stage, all at
the customer’s sole risk.
31-Mar.-2016 Ver1.0
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
WYSACVLXY-XX
Control No.
HD-AG-A150096 (2/2)
Control name
General Items
e. i) You are requested to fully check and confirm by the start of mass production of this Product
that (1) no bug, defect or other failure is included in firmware incorporated in this Product
(“Incorporated Software”), (2) no bug defect or other failure is caused by installation of this
Product with Incorporated Software into customer’s products, and that Incorporated Software
fully meets customer’s intended use, although TAIYO YUDEN sufficiently inspects or verifies
quality of Incorporated Software.
ii) Please note that TAIYO YUDEN is not responsible for any failure arising out of bugs or defects
in Incorporated Software.
f. TAIYO YUDEN warrants only that this Product is in conformity with this Specification for one
year after purchase and shall in no event give any other warranty.
g. Communication between this Product and others might not be established nor maintained
depending upon radio environment or operating conditions of this Product and other ISM band
at 2.4GHz products.
h. In order to take tests for getting the certification of each country’s Radio Law with a device
incorporating this module, it is necessary to make the software in Host to put the module into
test condition. Please contact TAIYO YUDEN for further details.
i. This Product operates in the unlicensed ISM band at 2.4GHz. In case this Product is used
around the other wireless devices which operate in same frequency band of this Product, there
is a possibility that interference occurs between this Product and such other devices. If such
interference occurs, please stop the operation of other devices or relocate this Product before
using this Product or do not use this Product around the other wireless devices.
j. Please evaluate adequately our module incorporated to your products before mass production.
k. Part Number Modification Notice
Part numbers for sample modules or part numbers you see in this Specification are TAIYO
YUDEN standard part numbers. When any modification is made to modules to meet requested
specifications, the part number will carry a different part number, due to forfeit originality.
Additionally, part numbers may be modified based on mass production stage or other related
stages. Please contact TAIYO YUDEN to confirm whether your part number needs to be
modified.
Please see the following examples for cases that part numbers are modified:
- for specific firmware version (our standard item firmware will be upgraded occasionally)
- for specific MAC address (our standard item MAC address is owned by TAIYO YUDEN )
- for other relevant cases (specific or different setting, form, sizes, or display etc..)
m. Caution for Export Control
This Product may be subject to governmental approvals, consents, licenses, authorizations,
declarations, filings, and registrations for export or re-export of the Product, required by
Japanese Foreign Exchange and Foreign Trade Law(including related laws and
regulations) and/or any other country’s applicable laws or regulations related to export
control.
In case you will export or re-export this Product, you are strongly recommended to check
and confirm, before exporting or re-exporting, necessary procedures for export or re-export
of this Product which is required by applicable laws and regulations, and if necessary, you
have to obtain necessary and appropriate approvals or licenses from governmental
authority at your own risk and expense.
31-Mar.-2016 Ver1.0
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
WYSACVLXY-XX
Control No.
HD-AM-A150096 (1/1)
Control name
Absolute maximum ratings
Absolute maximum ratings
Symbol
Rating
Remark
Min.
Typ.
Max.
Unit
VIO
-
3.63
V
VIOH
-
3.63
V
VIOF
-
3.63
V
V33
-
3.63
V
Tstg
-40
85
Degrees C
Topr
-30
25
85
Degrees C
Recommendation operating range
Item
Symbol
Rating
Remark
Min.
Typ.
Max.
Unit
Supply voltage 1
VIO
3.0
3.3
3.6
V
Supply voltage 2
VIOH
3.0
3.3
3.6
V
Supply voltage 3
VIOF
3.0
3.3
3.6
V
Supply voltage 4
V33
3.0
3.3
3.6
V
31-Mar.-2016 Ver1.0
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
WYSACVLXY-XX
Control No.
HD-AE-A150096 (1/4)
Control name
Electrical characteristics
DC Specifications
Peak Current / Power consumption
The Specification applies for Topr.= 25 degrees C, Supply voltage=Typical voltage
No.
Parameter
Condition
Symbol
Min.
Typ.
Max.
Unit
Remark
1
Peak Current
V33I
Ip1
-
400
mA
2
Power consumption3
Burst Tx (72.2Mbps)
Pc3
-
267
-
mW
Duty 4.2%
3
Power consumption4
Continuous Rx (72.2Mbps)
Pc4
-
271
-
mW
4
Power consumption5
Burst Tx (54Mbps)
Pc5
-
347
-
mW
Duty 25.4%
5
Power consumption6
Continuous Rx (54Mbps)
Pc6
-
267
-
mW
6
Power consumption7
Burst Tx (11Mbps)
Pc7
-
545
-
mW
Duty 46.8%
7
Power consumption8
Continuous Rx (11Mbps)
Pc8
-
267
-
mW
8
Power consumption9
WLAN: Deep sleep and
MPU: Stand By
Pc9
-
2
-
mW
Note1
Note1: Executed by embedded software’s commands which are WDPS1” followed by “WSBY0”.
Digital Pad Ratings
No.
Parameter
Condition
Symbol
Min.
Typ.
Max.
Unit
Remark
1
Input high voltage
VIH
0.7*VIO
-
VIO+0.4
V
2
Input low voltage
VIL
-0.4
-
0.3*VIO
V
3
Output high voltage
IOH=3mA
VOH
VIO-0.5V
-
-
V
4
Output low voltage
IOL=4mA
VOL
-
-
0.4
V
31-Mar.-2016 Ver1.0
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
WYSACVLXY-XX
Control No.
HD-AE-A150096 (2/4)
Control name
Electrical characteristics
AC Specifications
Power on sequence
No.
Parameter
Condition
Symbol
Min
Typ
Max
Unit
Remark
1
Valid Power to RESETN de-asserted
Tpor
300
-
-
mS
RESETn must remain asserted for minimum of Tpor after V33 and VIOH, VIO, VIOF are stable.
Tpor
RESETn
VIO
VIOF
V33
VIOH
RESETn Pulse Width
Parameter
Condition
Symbol
Min
Typ
Max
Unit
Minimum reset pulse width on RESETn pin
-
Trpw
300
ms
Trpw
RESETn
31-Mar.-2016 Ver1.0
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
WYSACVLXY-XX
Control No.
HD-AE-A150096 (3/4)
Control name
Electrical characteristics
RF Specifications (WLAN 11n/72.2Mbps, OFDM)
The Specification applies for Ta=25 degrees C, Supply voltage =Typical voltage.
No.
Parameter
Condition
Symbol
Min
Typ
Max
Unit
Remark
1
RF frequency range
FREQ
2412
2462
MHz
2
TX Power
Po
9
dBm
3
Spectrum Mask
1st Side Lobe
M1
-
-20
dBc
2nd Side Lobe
M2
-
-28
dBc
3rd Side Lobe
M3
-
-45
dBc
4
Symbol clock tolerance
Ft
-25
25
ppm
5
Frequency tolerance
Ft
-25
25
ppm
6
EVM
Rms
EVM
-
-28
dB
7
TX Out of band spurious1
30MHz to 1GHz
TOS1
-
-36
dBm
8
TX Out of band spurious2
1GHz to 12.75GHz
TOS2
-
-30
dBm
9
TX Out of band spurious3
1.8GHz to 1.9GHz
5.15GHz to 5.3GHz
TOS3
-47
dBm
10
Rx sensitivity
PER<10%
SEN
-
-68
-64
dBm
11
Maximum Input Level
PER<10%
MIL
-20
-
dBm
12
RX Out of band spurious1
30MHz to 1GHz
ROS1
-
-57
dBm
13
RX Out of band spurious2
1GHz to 12.75GHz
ROS2
-
-47
dBm
RF Specifications (WLAN 11g/54Mbps, OFDM)
The Specification applies for Ta=25 degrees C, Supply voltage =Typical voltage
No.
Parameter
Condition
Symbol
Min
Typ
Max
Unit
Remark
1
RF frequency range
FREQ
2412
2462
MHz
2
TX Power
Po
9
dBm
3
Spectrum Mask
1st Side Lobe
M1
-
-20
dBc
2nd Side Lobe
M2
-
-28
dBc
3rd Side Lobe
M3
-
-40
dBc
4
Symbol clock tolerance
Ft
-25
25
ppm
5
Frequency tolerance
Ft
-25
25
ppm
6
EVM
Rms
EVM
-
-25
dB
7
TX Out of band spurious1
30MHz to 1GHz
TOS1
-
-36
dBm
8
TX Out of band spurious2
1GHz to 12.75GHz
TOS2
-
-30
dBm
9
TX Out of band spurious3
1.8GHz to 1.9GHz
5.15GHz to 5.3GHz
TOS3
-47
dBm
10
Rx sensitivity
PER<10%
SEN
-
-71
-65
dBm
11
Maximum Input Level
PER<10%
MIL
-20
-
dBm
12
RX Out of band spurious1
30MHz to 1GHz
ROS1
-
-57
dBm
13
RX Out of band spurious2
1GHz to 12.75GHz
ROS2
-
-47
dBm
31-Mar.-2016 Ver1.0
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
WYSACVLXY-XX
Control No.
HD-AE-A150096 (4/4)
Control name
Electrical characteristics
RF Specifications (WLAN 11b/11Mbps, CCK)
The Specification applies for Ta=25 degrees C, Supply voltage=Typical voltage
No.
Parameter
Condition
Symbol
Min
Typ
Max
Unit
Remark
1
RF frequency range
FREQ
2412
2462
MHz
2
TX Power
Po
15
dBm
3
Spectrum Mask
1st Side Lobe
M1
-
-30
dBc
2nd Side Lobe
M2
-
-50
dBc
4
Power up-down rump
Power up
TU
-
2
us
Power down
TD
-
2
us
5
Frequency tolerance
Ft
-25
25
ppm
6
EVM
Peak
EVM
-
35
%
7
TX Out of band spurious1
30MHz to 1GHz
TOS1
-
-36
dBm
8
TX Out of band spurious2
1GHz to 12.75GHz
TOS2
-
-30
dBm
9
TX Out of band spurious3
1.8GHz to 1.9GHz
5.15GHz to 5.3GHz
TOS3
-47
dBm
10
Rx sensitivity
PER<8%
SEN
-86
-76
dBm
11
Maximum Input Level
PER<8%
MIL
-10
dBm
12
RX Out of band spurious1
30MHz to 1GHz
ROS1
-
-57
dBm
13
RX Out of band spurious2
1GHz to 12.75GHz
ROS2
-
-47
dBm
31-Mar.-2016 Ver1.0
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
WYSACVLXY-XX
Control No.
HD-MC-A150096 (1/2)
Control name
Circuit Schematic
Block Diagram
I2C
X`tal
SPI
Tx/Rx
2.4GHz
RESETn
V33
BPF
MW300
11bgn
Flash
Memory
SRAM
512KB UART
GPIO
Coretex-M4
(200MHz)
VIO
VIOH
VIOF
4MB
JTAG
31-Mar.-2016 Ver1.0
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
WYSACVLXY-XX
Control No.
HD-MC-A150096 (2/2)
Control name
Circuit Schematic
Recommended peripheral circuit schematics
WYSACVLXY-XX
Preliminary
V33 , VIOH, VIO and VIOF are power supply pin.
Supply voltage is 3.3V typical, so these pins can be
tied together.
These capacitors should be
placed near module pin.
Ceramic capacitors are
recommended.
All power traces should be fat.
2:UART1_CTSN
32:GND
41:GND
42:GND
43:GND
44:GND
33:WAKE_UP0
1uF
3:UART1_RTSN
4:UART1_TXD
5:UART1_RXD
UART1
6:SSP2_CLK
7:SSP2_FRM
8:SSP2_TXD
9:SSP2_RXD
10:I2C0_SCL(*1)
11:I2C0_SDA(*2)
12:UART0_RXD
13:UART0_TXD 24:TCK
23:TMS
22:TDI
21:TRSTN
25:TDO
26:CON5
27:RESETN RESETN
28:RSVD
29:VIO
30:V33
31:VIOF
VIO
10uF
V33
1uF
VIOF
34:WAKE_UP1
35:GPIO24
36:GPIO25
37:SPI_REQ
38:CON4
39:GPIO40
40:GPIO41
GPIO24 and GPIO25
are needed to be tied
together
WAKE UP
WAKE UP
14:VIOH
1uF
These capacitors should be
placed near module pin.
Ceramic capacitors are
recommended.
All power traces should be fat.
VIO
V33
VIOH
VIOF
VIOH
3.3V (TYP)
Note1 : All IO pins should be left open (no need to pull-up or pull-down) if not used.
(*1)(*2):I2C0_SDA and I2C0_SCL are able to used as configuration pin.
Please refer to specification of embedded software for more detail.
19:RF
NC
NC
16:NC
17:NC
1:GND
15:GND
18:GND
20:GND
NC
NC
2.2K
2.2K
VIO
NC
NC
RESETN is pulled up inside
the module.
NC
NC NC
NC
NC
NC
NC
NC
NC
HOST interface : UART 1
NC
NC
NC
NC
NC
Both WAKE_UP0 and
WAKE _UP1 should be
pulled up to VIO by
2.2Kohm register.
31-Mar.-2016 Ver1.0
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
WYSACVLXY-XX
Control No.
HD-AD-A150096 (1/5)
Control name
Outline/Appearance
OUTLINE
14
2.4max
21.4
Unit: mm, Tolerances unless otherwise specified:
+/-0.2mm
(TOP VIEW)
Non-through hole
Non-through hole
31-Mar.-2016 Ver1.0
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
WYSACVLXY-XX
Control No.
HD-AD- A150096 (2/5)
Control name
Outline/Appearance
Indication of Shield Case
1) Model WYSACVLXY
2) Manufacture TAIYO YUDEN CO.,LTD.
3) Japan logo mark Specified logo mark
4) Japan ID 007-AD0172
5) IC ID 4389B-WYSACVLXY
6) FCC ID RYYWYSACVLXY
7) Part Number WYSACVLXY-XX
8) Lot number Four digits
9 1pin mark φ0.6mm hole on the shield case
31-Mar.-2016 Ver1.0
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
WYSACVLXY-XX
Control No.
HD-AD- A150096 (3/5)
Control name
Outline/Appearance
Module Pad Dimension
Unit: mm
Dummy Pad
31-Mar.-2016 Ver1.0
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
WYSACVLXY-XX
Control No.
HD-AD- A150096 (4/5)
Control name
Outline/Appearance
Recommended Land Pattern Dimension
We recommend that pad sizes on mother board and pad sizes on module should be the
same except for Pad-16 and Pad-17. Pad-16 and Pad-17 are not needed to solder on mother
board and Land patterns for these pads are not needed.
Unit: mm
(Top View)
31-Mar.-2016 Ver1.0
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
WYSACVLXY-XX
Control No.
HD-AD-A150096 (5/5)
Control name
Outline/Appearance
Recommended Metal Mask (Solder Mask) Conditions
Mask size see bellow. Thickness of the Metal Mask should be in the range 0.1 mm
Unit: mm
31-Mar.-2016 Ver1.0
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
WYSACVLXY-XX
Control No.
HD-BA-A150096 (1/3)
Control name
Pin Layout
Pin
No
module pin
name
type
power
domain
Description
88MW30
0
GPIO No
Note
1
GND
-
Ground
GND
-
2
UART1_CTSn
I
VIO
UART1 CTSn (L:Clear to
send, H:Not clear to send)
GPIO42
3
UART1_RTSn
O
VIO
UART1 RTSn(L:Request to
send, H:Not request to send)
GPIO43
4
UART1_TXD
O
VIO
UART1 TXD
GPIO44
5
UART1_RXD
I
VIO
UART1 RXD
GPIO45
6
SSP2_CLK
I/O
VIO
Synchronous Serial Interface
(SPI_CLK)
GPIO46
Not used
7
SSP2_FRM
I/O
VIO
Synchronous Serial Interface
(SPI_CSN)
GPIO47
Not used
8
SSP2_TXD
O
VIO
Synchronous Serial Interface
(SPI_DO)
GPIO48
Not used
9
SSP2_RXD
I
VIO
Synchronous Serial Interface
(SPI_DI)
GPIO49
Not used
10
I2C0_SCL
I/O
VIOH
I2C0 SCL. Pull up to VIOH
with 1Kohm register if use this
pin as I2C.
GPIO5
Used to
select start
mode (*1)
11
I2C0_SDA
I/O
VIOH
I2C0 SDA. Pull up to VIOH
with 1Kohm register if use this
pin as I2C.
GPIO4
Used to
force
initialization
(*1)
12
UART0_RXD
I
VIOH
UART0 RXD
GPIO3
Not used
13
UART0_TXD
O
VIOH
UART0 TXD
GPIO2
Not used
14
VIOH
I
VIOH
I/O Digital Power Supply
-
15
GND
-
Ground
GND
-
16
N.C
-
-
Dummy pad. No connect and
do not solder.
-
17
N.C
-
-
Dummy pad. No connect and
do not solder.
-
18
GND
-
Ground
GND
-
19
RF
I/O
-
WLAN RF Interface (2.4 GHz
Transmit/Receive)
Should be left open and do not
trace longer than land pattern.
-
31-Mar.-2016 Ver1.0
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
WYSACVLXY-XX
Control No.
HD-BA-A150096 (2/3)
Control name
Pin Layout
Pin
No
module pin
name
type
power
domain
Description
88MW300
GPIO No
Note
20
GND
-
Ground
GND
-
21
TRSTn
I
VIOH
JTAG-TRSTN (Active L)
GPIO10
Not used
22
TDI
I
VIOH
JTAG-TDI
GPIO9
Not used
23
TMS
I
VIOH
JTAG-TMS
GPIO8
Not used
24
TCK
I
VIOH
JTAG-TCK
GPIO7
Not used
25
TDO
O
VIOH
JTAG-TDO
GPIO6
Not used
26
CON5
I/O
VIO
Configuration Pin. Should be
left open.
GPIO16
Not used
27
RESETn
I
VIO
RESET signal (Active low)
-
28
RSVD
-
-
No Connect. Should be left
open.
-
29
VIO
I
VIO
I/O Digital Power Supply
-
30
V33
I
V33
3.3V Power Supply
-
31
VIOF
I
VIO_F
I/O Digital Power Supply
-
32
GND
-
Ground
GND
-
33
WAKE_UP0
I
VIO
Wakeup-0 signal (Active L).
Should be pulled up to VIO
with 2.2K ohm register outside
the module.
GPIO22
34
WAKE_UP1
I
VIO
Wakeup-1 signal (Active L).
Should be pulled up to VIO
with 2.2K ohm register outside
the module.
GPIO23
35
GPIO24
I/O
VIO
GPIO24 and GPIO25 are
used to calibrate RC32k inside
the module. Tie GPIO24 and
GPIO25 outside the module
and do not tie other signal.
GPIO24
36
GPIO25
I/O
VIO
GPIO24 and GPIO25 are
used to calibrate RC32k inside
the module. Tie GPIO24 and
GPIO25 outside the module
and do not tie other signal.
GPIO25
37
SPI_REQ
I/O
VIO
Interrupt for SPI
GPIO26
Not used
31-Mar.-2016 Ver1.0
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
WYSACVLXY-XX
Control No.
HD-BA-A150096 (3/3)
Control name
Pin Layout
Pin
No
module pin
name
type
power
domain
Description
88MW300
GPIO No
Note
38
CON4
I/O
VIO
Configuration Pin. Should be
left open
GPIO27
Not used
39
GPIO40
I/O
VIO
General Purpose I/O 40.
GPIO40
Not used
40
GPIO41
I/O
VIO
General Purpose I/O 41.
GPIO41
Not used
41
GND
-
Ground
GND
-
42
GND
-
Ground
GND
-
43
GND
-
Ground
GND
-
44
GND
-
Ground
GND
-
Note: IO pins should be left open if not used, unless otherwise noted.
(*1) Please refer to the specification of embedded software for more detail.
31-Mar.-2016 Ver1.0
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
WYSACVLXY-XX
Control No. (1/1)
Control name
Reflow profile
0
50
100
150
200
250
300
IN OUT
Temp(deg)
130-180deg Pre-heat
: 60~120sec
Peak Temp:250deg Max
230deg up : 40secMax
Recommented Reflow Profile
31-Mar.-2016 Ver1.0
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
WYSACVLXY-XX
WLAN Embedded Software Specification
(Simplified Version)
TAIYO YUDEN Standard Application for WLAN
For WYSACVLXY-XX
This document is simplified version of specification
document. Some of features and commands are not
explained.
In case you adopt this module and design some appliance,
please ask for the complete version of it to the local sales
office.
31-Mar.-2016 Ver1.0
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
WYSACVLXY-XX
Control No. (1/8)
Control name
Software Specification
Copyright Information:
-TAIYO YUDEN CO., LTD. WLAN Embedded Specification Documentation-
TAIYO YUDEN Co., Ltd. lawfully has copyrights and other
rights to the Embedded Software. Except as otherwise
expressly provided herein, you are not permitted to disclose
or offer the Embedded Software, either wholly or partly, to
any third party (including uploading to your company or third
party (ies)'s web sites and downloading by third parties from
such sites), nor to copy, revise, reverse engineer, upgrade,
make specification change, or alienate the Embedded
Software.
You are requested to fully check and confirm the following by
the start of mass production, although TAIYO YUDEN Co.,
Ltd. sufficiently inspects or verifies quality of the Embedded
Software.
(1) No bug, defect or other failure is included in the
Embedded Software
(2) No bug, defect or other failure arising from installation of
the Module into your product
(3) Software fully meets your intended use
Copyright Year 2014-2016
Firmware Version is 2.00.01 (Build3.2.12)
There is a possibility of changing a software specification.
31-Mar.-2016 Ver1.0
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
WYSACVLXY-XX
Control No. (2/8)
Control name
Software Specification
1. Overview
This specification is for TAIYO YUDEN Standard Application for WLAN (referred to as TY's App).
Target applications are POS, Handy Terminal, Telemetry, FA, etc. This is explained only Wireless LAN
Station feature and http connectivity. But the software has other feature such as micro AP mode, TCP,
UDP, https connectivity and etc.
Infrastructure
micro-AP
Barcode Reader
Printer
Usage Model
Air conditioner
WLAN Embedded Module (Station)
Fax
Access Point
Smart Phone (Station)
micro-AP (Infrastructure)
Smart Phone (Station)
DSC (micro-AP)
31-Mar.-2016 Ver1.0
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
WYSACVLXY-XX
Control No. (3/8)
Control name
Software Specification
2. PIN configuration
2.1. UART
Port : UART1
Baud rate : 115200 bps (default)
Parity : none
Stop bit : 1
Flow control : hardware
Baud rate can be configured by STC command.
3. Control Command Syntax
Control commands which the host sends are based on character strings that start with “W”(ASCII
code: 0x57, 87 decimal), and that end with <CR><LF> (ASCII code: 0x0D 0x0A) (decimal values 13,
10).
Response event which host receives are started with <CR><LF> and ended <CR><LF>. Please
note that this specification / application does not allow for multiple commands to be sent to the host.
The application is not responsible for parsing of packets / command sequences.
Command Mode Control Command:
“W”{command characters}[Parameter1Parameter2:: Parameter(N)]<CR><LF>
Response Event:
<CR><LF>{command
characters}[Parameter1,Parameter2,::Parameter(N)]<CR><LF>
31-Mar.-2016 Ver1.0
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
WYSACVLXY-XX
Control No. (4/8)
Control name
Software Specification
4. Command List
Configuration Commands
Command
Character
Function
Parameter
Response
Configuration
STC
Set common setting value
For instance
WSTC0100
No.: 01 (UART baud rate)
Value: 00 (115.2kbps)
Parameter 0:
01 : UART baud rate
Parameter 1:
Value
00 : 115200 (default)
01 : 9600
02 : 19200
03 : 38400
04 : 57600
05 : 115200
06 : 230400
07 : 250000
08 : 500000
09 : 1000000
10 : 1500000
11 : 2000000
* Baud rate setting will be updated
after reboot.
Successful: ACK
Failed: NAK##
STI
Set infrastructure configuration.
For instance
WSTI101ACCESS POINTA
List: 1
No.: 01 (SSID)
Value: ACCESS POINTA
WSTI10312345678
List: 1
No.: 03 (PSK)
Value: 12345678
Parameter 0
List Index
“1” “4”
Parameter 1
Item No.
“01” “99”
Refer STI Profile Table
Parameter 2
Value
Refer STI Profile Table
Successful: ACK
Failed: NAK##
31-Mar.-2016 Ver1.0
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
WYSACVLXY-XX
Control No. (5/8)
Control name
Software Specification
Infrastructure Control Commands
Command
Character
Function
Parameter
Response
Link Control
ISC
Scan for wireless networks
* up to 30th Access Point
Successful:
SCR,
ACK
(ACK is
termination)
Failed:
NAK##
ICO
Connect to a network
For instance
WICO1
Before this command is issued, List Index
corresponding to AP information must be set
using STI command.
Parameter:
List Index
‘0’ ‘4’
‘1’ ‘4’ : Profile Index
Successful:
CON
Failed:
NAK##
HTG
Start an HTTP session and read data
(http_open_session,
http_get_response_hdr,
http_read_content, http_close_session)
For instance
WHTG02http://www.google.co.jp/
Parameter 0:
Handle
‘”01” ~ “99”
Parameter 1:
URI contained Host Name
or
IP address
(Max length 1024)
Successful:
RCS,
RCT
Failed:
NAK##
* NAK31 is
followed by
RCT
response.
31-Mar.-2016 Ver1.0
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
WYSACVLXY-XX
Control No. (6/8)
Control name
Software Specification
Command
Character
Function
Parameter
Response
HPS
HTTP Post
For instance
WHPShttp://www.test.org/index.html*abc=1
234&def=5678
* HTML is as follows.
<BODY>
<FORM ACTION=’index.html
METHOD=’POST’>
<INPUT TYPE=’hidden’ NAME=’abc’
VALUE=’1234’>
<INPUT TYPE=’hidden’ NAME=’def’
VALUE=’5678’>
<INPUT TYPE=’submit’ VALUE=Click!’>
</BODY>
Parameter 0:
URI
(Put a *’ in the edge of the
URI.)
(Max length 1024 without
*’)
Parameter 1:
Content
(up to 3072byte ,
ASCII data)
Successful:
POK,
RCT
Failed:
NAK##
* NAK31 is
followed by
RCT
response.
31-Mar.-2016 Ver1.0
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
WYSACVLXY-XX
Control No. (7/8)
Control name
Software Specification
STI Profile Table
Item No.
Item Name
Value
01
ssid
Max 32characters
02
security type
‘0’ : No security
‘1’ : WEP with open key.
‘2’ : WEP with shared key
‘3’ : WPA/WPA2 with PSK mixed
‘4’ : WPA2 with PSK
In STU/GTU, only ‘0 or ‘4’ can be accepted.
03
security key
Max 64 characters
WEP : ASCII (5 or 13byte) / HEX (10 or 26byte)
WPA/WPA2 : ASCII
04
addr_type
‘0’ in STU/GTU
‘0’ : Static
‘1’ : DHCP
05
IP address (static addr type)
“XXX.XXX.XXX.XXX”
06
subnet mask (static addr
type)
“XXX.XXX.XXX.XXX”
07
default gateway (static addr
type)
“XXX.XXX.XXX.XXX”
08
primary DNS server (static
addr type)
“XXX.XXX.XXX.XXX”
09
secondary DNS server
(static addr type)
“XXX.XXX.XXX.XXX”
31-Mar.-2016 Ver1.0
TAIYO YUDEN CO., LTD.
TAIYO YUDEN CO., LTD.
WYSACVLXY-XX
Control No. (8/8)
Control name
Software Specification
5. Error Codes
#
Error Name
Program Logic Cause
Action taken by host
FF
System Error
There is the possibility that the
hardware is out of order.
Please inquire Taiyo Yuden.
00
Command Not
Recognized
It confirms whether or not the
command is correct.
Send the command once
again.
01
Bad Parameter
It confirms whether or not the
parameter is correct.
Send the command once
again.
04
Connection Error
General connection error
Check parameter and retry.
Reconnect or reboot.
05
Profile Error
UAP / ICO command is called with
invalid profile setting.
Set micro-AP / Infrastructure
profile
10
Network Not Found
Access Point is not exist.
Check Access Point setting.
11
Authentication
Failed
Authentication error occurs in
association to Access Point.
Check parameter and retry.
12
DHCP Failed
IP address is not assigned after
association to Access Point.
Check Access Point setting.
14
Other Infrastructure
Connection error
Other error occurs in connection to
Access Point.
Check Access Point setting.
15
Infrastructure is
connected
ICO / WPS command is called while
infrastructure is connected.
Disconnect infrastructure
with IDC command.
30
HTTP connection
error
Can not access HTTP server
Check WLAN connection
and HTTP address.
In HTTPS, check whether
the server’s certificate is
installed.
31
HTTP status code
Error
HTTP status code is not 200 (OK).
Status code will be added after a
comma.
For instance
NAK31,301
NAK31,404
Check HTTP status code.
32
Invalid User
certificates
There is one or more invalid user
certificates.
Check User certificates.