PD - 9.1533A IRFR/U5410 l l l l l l l Ultra Low On-Resistance P-Channel Surface Mount (IRFR5410) Straight Lead (IRFU5410) Advanced Process Technology Fast Switching Fully Avalanche Rated HEXFET(R) Power MOSFET D VDSS = -100V RDS(on) = 0.205W G ID = -13A S Description Fifth Generation HEXFETs from International Rectifier utilize advanced processing techniques to achieve extremely low on-resistance per silicon area. This benefit, combined with the fast switching speed and ruggedized device design that HEXFET Power MOSFETs are well known for, provides the designer with an extremely efficient and reliable device for use in a wide variety of applications. The D-Pak is designed for surface mounting using vapor phase, infrared, or wave soldering techniques. The straight lead version (IRFU series) is for through-hole mounting applications. Power dissipation levels up to 1.5 watts are possible in typical surface mount applications. D-Pak TO-252AA I-Pak TO-251AA Absolute Maximum Ratings ID @ TC = 25C ID @ TC = 100C IDM PD @TC = 25C V GS EAS IAR EAR dv/dt TJ TSTG Parameter Max. Continuous Drain Current, VGS @ -10V Continuous Drain Current, VGS @ -10V Pulsed Drain Current Power Dissipation Linear Derating Factor Gate-to-Source Voltage Single Pulse Avalanche Energy Avalanche Current Repetitive Avalanche Energy Peak Diode Recovery dv/dt Operating Junction and Storage Temperature Range Soldering Temperature, for 10 seconds -13 -8.2 -52 66 0.53 20 194 -8.4 6.3 -5.0 -55 to + 150 Units A W W/C V mJ A mJ V/ns 300 (1.6mm from case ) C Thermal Resistance Parameter RqJC RqJA RqJA www.irf.com Junction-to-Case Junction-to-Ambient (PCB mount)** Junction-to-Ambient Typ. Max. Units 1.9 50 110 C/W 1 5/3/99 IRFR/U5410 Electrical Characteristics @ TJ = 25C (unless otherwise specified) Parameter Drain-to-Source Breakdown Voltage DV(BR)DSS/DTJ Breakdown Voltage Temp. Coefficient RDS(on) Static Drain-to-Source On-Resistance VGS(th) Gate Threshold Voltage gfs Forward Transconductance Qg Qgs Qgd td(on) tr td(off) tf Gate-to-Source Forward Leakage Gate-to-Source Reverse Leakage Total Gate Charge Gate-to-Source Charge Gate-to-Drain ("Miller") Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Min. -100 -2.0 3.2 Typ. -0.12 15 58 45 46 LD Internal Drain Inductance 4.5 LS Internal Source Inductance 7.5 Ciss Coss Crss Input Capacitance Output Capacitance Reverse Transfer Capacitance 760 260 170 V(BR)DSS IDSS IGSS Drain-to-Source Leakage Current Max. Units Conditions V VGS = 0V, ID = -250A V/C Reference to 25C, ID = -1.0mA 0.205 W VGS = -10V, I D = -7.8A -4.0 V VDS = VGS, ID = -250A S VDS = -50V, ID = -7.8A -25 VDS = -100V, VGS = 0V A -250 VDS = -80V, VGS = 0V, TJ = 150C 100 VGS = 20V nA -100 VGS = -20V 58 ID = -8.4A 8.3 nC VDS = -80V 32 VGS = -10V, See Fig. 6 and 13 VDD = 50V ID = -8.4A ns RG = 9.1W RD =6.2W, See Fig. 10 D Between lead, 6mm (0.25in.) nH G from package and center of die contact S VGS = 0V pF VDS = -25V = 1.0MHz, See Fig. 5 Source-Drain Ratings and Characteristics IS ISM V SD t rr Qrr ton Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Forward Turn-On Time Notes: Repetitive rating; pulse width limited by max. junction temperature. ( See fig. 11 ) Starting TJ = 25C, L = 6.4mH RG = 25W, IAS = -7.8A. (See Figure 12) ISD -7.8A, di/dt 200A/s, VDD V(BR)DSS, TJ 150C Min. Typ. Max. Units Conditions D MOSFET symbol -13 showing the A G integral reverse -52 p-n junction diode. S -1.6 V TJ = 25C, IS = -7.8A, VGS = 0V 130 190 ns TJ = 25C, IF = -8.4A 650 970 nC di/dt = 100A/s Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD) Pulse width 300s; duty cycle 2%. This is applied for I-PAK, LS of D-PAK is measured between lead and center of die contact Uses IRF9530N data and test conditions. ** When mounted on 1" square PCB (FR-4 or G-10 Material ) . For recommended footprint and soldering techniques refer to application note #AN-994 2 www.irf.com IRFR/U5410 100 100 VGS -15V -10V -8.0V -7.0V -6.0V -5.5V -5.0V BOTTOM -4.5V VGS -15V -10V -8.0V -7.0V -6.0V -5.5V -5.0V BOTTOM -4.5V 10 TOP -I D , Drain-to-Source Current (A) -I D , Drain-to-Source Current (A) TOP 1 -4.5V 0.1 20s PULSE WIDTH TJ = 25 C 0.01 0.1 1 10 10 -4.5V 1 100 -VDS , Drain-to-Source Voltage (V) TJ = 150 C 1 V DS = 10V 20s PULSE WIDTH 5 6 7 8 9 10 -VGS , Gate-to-Source Voltage (V) Fig 3. Typical Transfer Characteristics www.irf.com RDS(on) , Drain-to-Source On Resistance (Normalized) -I D , Drain-to-Source Current (A) 2.5 TJ = 25 C 4 10 100 Fig 2. Typical Output Characteristics 100 0.1 1 -VDS , Drain-to-Source Voltage (V) Fig 1. Typical Output Characteristics 10 20s PULSE WIDTH TJ = 150 C 0.1 0.1 ID = -14A 2.0 1.5 1.0 0.5 0.0 -60 -40 -20 VGS = -10V 0 20 40 60 80 100 120 140 160 TJ , Junction Temperature ( C) Fig 4. Normalized On-Resistance Vs. Temperature 3 IRFR/U5410 2000 1200 -VGS , Gate-to-Source Voltage (V) 1600 C, Capacitance (pF) 20 V GS = 0V, f = 1MHz C iss = Cgs + Cgd , Cds SHORTED C rss = C gd C oss = Cds + C gd Ciss 800 Coss Crss 400 0 A 1 10 ID = -8.4A 15 10 5 FOR TEST CIRCUIT SEE FIGURE 13 0 0 100 10 30 40 50 60 Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage 1000 100 OPERATION IN THIS AREA LIMITED BY RDS(on) TJ = 150 C -II D , Drain Current (A) -ISD , Reverse Drain Current (A) 20 QG , Total Gate Charge (nC) -VDS , Drain-to-Source Voltage (V) 10 TJ = 25 C 1 0.1 0.2 100 10us 100us 10 0.8 1.4 2.0 Fig 7. Typical Source-Drain Diode Forward Voltage 2.6 1ms TC = 25 C TJ = 150 C Single Pulse V GS = 0 V -VSD ,Source-to-Drain Voltage (V) 4 VDS =-80V VDS =-50V VDS =-20V 1 1 10ms 10 100 1000 -VDS , Drain-to-Source Voltage (V) Fig 8. Maximum Safe Operating Area www.irf.com IRFR/U5410 15 VGS 12 -ID , Drain Current (A) RD VDS D.U.T. RG + 9 VDD -10V Pulse Width 1 s Duty Factor 0.1 % 6 Fig 10a. Switching Time Test Circuit 3 td(on) tr t d(off) tf VGS 10% 0 25 50 75 100 125 150 TC , Case Temperature ( C) 90% VDS Fig 9. Maximum Drain Current Vs. Case Temperature Fig 10b. Switching Time Waveforms Thermal Response (Z thJC ) 10 1 D = 0.50 0.20 0.10 PDM 0.05 0.1 0.02 0.01 0.01 0.00001 t1 SINGLE PULSE (THERMAL RESPONSE) t2 Notes: 1. Duty factor D = t 1 / t 2 2. Peak T J = P DM x Z thJC + TC 0.0001 0.001 0.01 0.1 1 t1 , Rectangular Pulse Duration (sec) Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case www.irf.com 5 IRFR/U5410 L VDS - V V DD + DD D.U.T RG A IAS -20V tp DRIVER 0.01 15V Fig 12a. Unclamped Inductive Test Circuit I AS EAS , Single Pulse Avalanche Energy (mJ) 500 ID -3.5A -4.9A BOTTOM -7.8A TOP 400 300 200 100 0 25 50 75 100 125 150 Starting TJ , Junction Temperature ( C) Fig 12c. Maximum Avalanche Energy Vs. Drain Current tp V(BR)DSS Fig 12b. Unclamped Inductive Waveforms Current Regulator Same Type as D.U.T. 50K QG 12V -10V .2F .3F QGS QGD D.U.T. +VDS VGS VG -3mA Charge Fig 13a. Basic Gate Charge Waveform 6 IG ID Current Sampling Resistors Fig 13b. Gate Charge Test Circuit www.irf.com IRFR/U5410 Peak Diode Recovery dv/dt Test Circuit + D.U.T* Circuit Layout Considerations * Low Stray Inductance * Ground Plane * Low Leakage Inductance Current Transformer + - - + RG * dv/dt controlled by RG * ISD controlled by Duty Factor "D" * D.U.T. - Device Under Test VGS * + - VDD Reverse Polarity of D.U.T for P-Channel Driver Gate Drive P.W. D= Period P.W. Period [VGS=10V ] *** D.U.T. ISD Waveform Reverse Recovery Current Body Diode Forward Current di/dt D.U.T. VDS Waveform Diode Recovery dv/dt Re-Applied Voltage Body Diode [VDD] Forward Drop Inductor Curent Ripple 5% [ISD ] *** VGS = 5.0V for Logic Level and 3V Drive Devices Fig 14. For P-Channel HEXFETS www.irf.com 7 IRFR/U5410 Package Outline TO-252AA Outline Dimensions are shown in millimeters (inches) 2.38 (.094) 2.19 (.086) 6.73 (.265) 6.35 (.250) 1.14 (.045) 0.89 (.035) -A1.27 (.050) 0.88 (.035) 5.46 (.215) 5.21 (.205) 0.58 (.023) 0.46 (.018) 4 6.45 (.245) 5.68 (.224) 6.22 (.245) 5.97 (.235) 1.02 (.040) 1.64 (.025) 1 2 10.42 (.410) 9.40 (.370) 3 0.51 (.020) MIN. -B1.52 (.060) 1.15 (.045) 3X 2X 1.14 (.045) 0.76 (.030) 0.89 (.035) 0.64 (.025) 0.25 (.010) LEAD ASSIGNMENTS 1 - GATE 2 - DRAIN 3 - SOURCE 4 - DRAIN 0.58 (.023) 0.46 (.018) M A M B NOTES: 1 DIMENSIONING & TOLERANCING PER ANSI Y14.5M, 1982. 2.28 (.090) 2 CONTROLLING DIMENSION : INCH. 3 CONFORMS TO JEDEC OUTLINE TO-252AA. 4 DIMENSIONS SHOWN ARE BEFORE SOLDER DIP, SOLDER DIP MAX. +0.16 (.006). 4.57 (.180) Part Marking Information TO-252AA (D-Pak) EXAMPLE : THIS IS AN IRFR120 WITH ASSEMBLY LOT CODE 9U1P INTERNATIONAL RECTIFIER LOGO A IRFR 120 9U ASSEMBLY LOT CODE 8 FIRST PORTION OF PART NUMBER 1P SECOND PORTION OF PART NUMBER www.irf.com IRFR/U5410 Package Outline TO-251AA Outline Dimensions are shown in millimeters (inches) 6.73 (.265) 6.35 (.250) 2.38 (.094) 2.19 (.086) -A- 0.58 (.023) 0.46 (.018) 1.27 (.050) 0.88 (.035) 5.46 (.215) 5.21 (.205) LEAD ASSIGNMENTS 4 1 - GATE 2 - DRAIN 3 - SOURCE 4 - DRAIN 6.45 (.245) 5.68 (.224) 6.22 (.245) 5.97 (.235) 1.52 (.060) 1.15 (.045) 1 2 3 -B- NOTES: 1 DIMENSIONING & TOLERANCING PER ANSI Y14.5M, 1982. 2.28 (.090) 1.91 (.075) 3X 1.14 (.045) 0.76 (.030) 2.28 (.090) 2 CONTROLLING DIMENSION : INCH. 3 CONFORMS TO JEDEC OUTLINE TO-252AA. 4 DIMENSIONS SHOWN ARE BEFORE SOLDER DIP, SOLDER DIP MAX. +0.16 (.006). 9.65 (.380) 8.89 (.350) 3X 1.14 (.045) 0.89 (.035) 0.89 (.035) 0.64 (.025) 0.25 (.010) 2X M A M B 0.58 (.023) 0.46 (.018) Part Marking Information TO-251AA (I-Pak) EXAMPLE : THIS IS AN IRFU120 WITH ASSEMBLY LOT CODE 9U1P INTERNATIONAL RECTIFIER LOGO IRFU 120 9U ASSEMBLY LOT CODE www.irf.com FIRST PORTION OF PART NUMBER 1P SECOND PORTION OF PART NUMBER 9 IRFR/U5410 Tape & Reel Information TO-252AA TR TRR 16.3 ( .641 ) 15.7 ( .619 ) 12.1 ( .476 ) 11.9 ( .469 ) FEED DIRECTION TRL 16.3 ( .641 ) 15.7 ( .619 ) 8.1 ( .318 ) 7.9 ( .312 ) FEED DIRECTION NOTES : 1. CONTROLLING DIMENSION : MILLIMETER. 2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS ( INCHES ). 3. OUTLINE CONFORMS TO EIA-481 & EIA-541. 13 INCH 16 mm NOTES : 1. OUTLINE CONFORMS TO EIA-481. WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, Tel: (310) 322 3331 IR GREAT BRITAIN: Hurst Green, Oxted, Surrey RH8 9BB, UK Tel: ++ 44 1883 732020 IR CANADA: 15 Lincoln Court, Brampton, Ontario L6T3Z2, Tel: (905) 453 2200 IR GERMANY: Saalburgstrasse 157, 61350 Bad Homburg Tel: ++ 49 6172 96590 IR ITALY: Via Liguria 49, 10071 Borgaro, Torino Tel: ++ 39 11 451 0111 IR FAR EAST: K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo Japan 171 Tel: 81 3 3983 0086 IR SOUTHEAST ASIA: 1 Kim Seng Promenade, Great World City West Tower, 13-11, Singapore 237994 Tel: ++ 65 838 4630 IR TAIWAN:16 Fl. Suite D. 207, Sec. 2, Tun Haw South Road, Taipei, 10673, Taiwan Tel: 886-2-2377-9936 http://www.irf.com/ Data and specifications subject to change without notice. 8/98 10 www.irf.com Note: For the most current drawings please refer to the IR website at: http://www.irf.com/package/