Attenuator Pads MAT Series Datasheet General Information These fixed attenuator chips are fabricated using our state of the art thin film metallization and advanced photolithography technology. All devices are available in chip form with a metalized ground connection on the back. This ground is wrapped around on the four corners of the chip so additional ground bonding ribbon is not required. The chips may be attached using conductive epoxy or solder preform. Gold contacts on the input and output pads make assembly, using standard bonding equipment, fast and reliable. Custom values and configuration available on request. RoHS Features * DC to 40 GHz * Medium Power Handling 2W CW * Flat Response From DC to 40 GHz * Return Loss > 18 dB DC to 12 GHz * Return Loss > 16 dB 13 to 40 GHz * Space Saving Footprint .030" X .030" (762 X .762mm) * Very Good Stability Over Temperature (TCR < 100 PPM) * Ground Wrap to Top (No ground bonding required) Electrical Characteristics Part Number MAT10010 MAT10020 MAT10030 MAT10040 MAT10050 MAT10060 MAT10070 MAT10080 MAT10090 MAT10100 MAT10110 MAT10120 MAT10130 MAT10140 MAT10150 MAT10160 MAT10170 MAT10180 MAT10190 MAT10200 MAT10210 MAT10220 MAT10230 MAT10240 MAT10250 MAT10260 MAT10270 MAT10280 MAT10290 MAT10300 Attn. (dB) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 IL (dB) +/- 0.30 +/- 0.30 +/- 0.30 +/- 0.30 +/- 0.30 +/- 0.35 +/- 0.35 +/- 0.35 +/- 0.35 +/- 0.35 +/- 0.40 +/- 0.40 +/- 0.40 +/- 0.40 +/- 0.40 +/- 0.50 +/- 0.50 +/- 0.50 +/- 0.50 +/- 0.50 +/- 0.60 +/- 0.60 +/- 0.60 +/- 0.60 +/- 0.60 +/- 1.00 +/- 1.00 +/- 1.00 +/- 1.00 +/- 1.00 RL (dB) >18 >18 >18 >18 >18 >18 >18 >18 >18 >18 >18 >18 >18 >18 >18 >18 >18 >18 >18 >18 >18 >18 >18 >18 >18 >18 >18 >18 >18 >18 Physical Dimensions .010 +/- .002 Front to Back Metallization in Four Places Aeroflex / Metelics Attenuator Pad IN OUT .03" +/- .002 Front to Back Metallization in Four Places Bonding Pad Sizes and Resisitor Outline may differ from value to value Back Side Document No. DS 14362 Rev. A, ECN 10858 Revision Date: 9/15/2011 .03" +/- .002 Attenuator Pads MAT Series Aeroflex / Metelics, Inc. ISO 9001:2008 certified companies 54 Grenier Field Road, Londonderry, NH 03053 Tel: (603) 641-3800 Sales: (888) 641-SEMI (7364) Fax: (603)-641-3500 975 Stewart Drive, Sunnyvale, CA 94085 Tel: (408) 737-8181 Fax: (408) 733-7645 www.aeroflex.com/metelics metelics-sales@aeroflex.com Aeroflex / Metelics, Inc. reserves the right to make changes to any products and services herein at any time without notice. Consult Aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. Aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or service from Aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of Aeroflex or of third parties. Copyright 2009 Aeroflex / Metelics. All rights reserved. Document No. DS 14362 Rev. A, ECN 10858 Revision Date: 9/15/2011 Our passion for performance is defined by three attributes represented by these three icons: solution-minded, performance-driven and customer-focused.