Document No. DS 14362 Rev. A, ECN 10858
Revision Date: 9/15/2011
Attenuator Pads
MAT Series Datasheet
General Information
These fixed attenuator chips are fabricated using our
state of the art thin film metallization and advanced pho-
tolithography technology.
All devices are available in chip form with a metalized
ground connection on the back. This ground is wrapped
around on the four corners of the chip so additional
ground bonding ribbon is not required.
The chips may be attached using conductive epoxy or
solder preform. Gold contacts on the input and output
pads make assembly, using standard bonding equip-
ment, fast and reliable. Custom values and configuration
available on request.
Electrical Characteristics
Features
• DC to 40 GHz
• Medium Power Handling 2W CW
• Flat Response From DC to 40 GHz
• Return Loss > 18 dB DC to 12 GHz
• Return Loss > 16 dB 13 to 40 GHz
• Space Saving Footprint .030” X .030”
(762 X .762mm)
• Very Good Stability Over Temperature
(TCR < 100 PPM)
• Ground Wrap to Top
(No ground bonding required)
Physical Dimensions
Part Number Attn. (dB) IL (dB) RL (dB)
MAT10010 1+/- 0.30 >18
MAT10020 2+/- 0.30 >18
MAT10030 3+/- 0.30 >18
MAT10040 4+/- 0.30 >18
MAT10050 5+/- 0.30 >18
MAT10060 6+/- 0.35 >18
MAT10070 7+/- 0.35 >18
MAT10080 8+/- 0.35 >18
MAT10090 9+/- 0.35 >18
MAT10100 10 +/- 0.35 >18
MAT10110 11 +/- 0.40 >18
MAT10120 12 +/- 0.40 >18
MAT10130 13 +/- 0.40 >18
MAT10140 14 +/- 0.40 >18
MAT10150 15 +/- 0.40 >18
MAT10160 16 +/- 0.50 >18
MAT10170 17 +/- 0.50 >18
MAT10180 18 +/- 0.50 >18
MAT10190 19 +/- 0.50 >18
MAT10200 20 +/- 0.50 >18
MAT10210 21 +/- 0.60 >18
MAT10220 22 +/- 0.60 >18
MAT10230 23 +/- 0.60 >18
MAT10240 24 +/- 0.60 >18
MAT10250 25 +/- 0.60 >18
MAT10260 26 +/- 1.00 >18
MAT10270 27 +/- 1.00 >18
MAT10280 28 +/- 1.00 >18
MAT10290 29 +/- 1.00 >18
MAT10300 30 +/- 1.00 >18
.03" +/- .002
.03" +/- .002
Front to Back Metallization in Four Places
Bonding Pad Sizes and Resisitor Outline
may differ from value to value
Aeroflex / Metelics Attenuator Pad
TUONI
Back Side
Front to Back Metallization in Four Places
.010 +/- .002
RoHS
Our passion for performance is defined by three
attributes represented by these three icons:
solution-minded, performance-driven and customer-focused.
Aeroflex / Metelics, Inc.
54 Grenier Field Road, Londonderry, NH 03053
Tel: (603) 641-3800
Sales: (888) 641-SEMI (7364)
Fax: (603)-641-3500
975 Stewart Drive, Sunnyvale, CA 94085
Tel: (408) 737-8181
Fax: (408) 733-7645
Aeroflex / Metelics, Inc. reserves the right to make changes to any products
and services herein at any time without notice. Consult Aeroflex or an author-
ized sales representative to verify that the information in this data sheet is cur-
rent before using this product. Aeroflex does not assume any responsibility or
liability arising out of the application or use of any product or service
described herein, except as expressly agreed to in writing by Aeroflex; nor
does the purchase, lease, or use of a product or service from Aeroflex con-
vey a license under any patent rights, copyrights, trademark rights, or any
other of the intellectual rights of Aeroflex or of third parties.
Copyright 2009 Aeroflex / Metelics. All rights reserved.
www.aeroflex.com/metelics metelics-sales@aeroflex.com
Document No. DS 14362 Rev. A, ECN 10858
Revision Date: 9/15/2011
Attenuator Pads
MAT Series
ISO 9001:2008 certified companies
