A Electrical Capacity (Resistive Load) Logic Level: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Contact Timing: Angle of Throw: Materials & Finishes Toggle/Lever: Bushing: Support Bracket: Housing: Base: Movable Contacts: Stationary Contacts: Terminals: Slides Indicators Touch Tilt Tactiles Environmental Data Operating Temp Range: Humidity: Vibration: Shock: PCB Processing Soldering: Cleaning: Standards & Certifications Flammability Standards: 0.4VA maximum @ 48V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 48V) Note: Find additional explanation of operating range in Supplement section. 50 milliohms maximum 1,000 megohms minimum @ 500V DC 1,000V AC minimum between contacts for 1 minute minimum; 1,500V AC minimum between contacts & case for 1 minute minimum 100,000 operations minimum for bat lever models 50,000 operations minimum for locking lever models 50,000 operations minimum Nonshorting (break-before-make) 24 Brass with chrome plating Brass with nickel plating Straight PC: phosphor bronze with tin plating; right angle & vertical: brass with tin plating Polybutylene terephthalate (PBT) (UL94V-0) 1- and 2-pole GFR polyamide (UL94V-0); 4-pole liquid crystal polymer (LCP) (UL94V-0) Phosphor bronze with gold plating Brass with gold plating Brass with gold plating -10C through +70C (+14F through +158F) 90 ~ 95% humidity for 240 hours @ 40C (104F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Wave Soldering recommended. See Profile A in Supplement section. Manual Soldering: 1- & 2-pole: 3 seconds maximum @ 350C maximum; 4-pole: 4 seconds maximum @ 410C maximum Hand clean locally using alcohol based solution. See Cleaning specifications in Supplement section. UL94V-0 rated housing & base The D2 Series toggles have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-current, logic level circuit. When used as intended in a logic level circuit, the results do not produce hazardous energy. Supplement Accessories PCB Mount Miniature Toggles General Specifications Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Toggles Series D2 A24 www.nkk.com A Rockers Distinctive Characteristics Toggles Series D2 PCB Mount Miniature Toggles Pushbuttons Base of heat resistant resin meets UL94V-0 flammability rating. Programmable Illuminated PB Maximized voltage capability of 48V allows use in medium source applications and increases operating life. Keylocks Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother positive detent actuation, increased contact stability, and unparalleled reliability. (Additional STC details under Terms and Acronyms in the Supplement section.) Rotaries Round .031" (0.8mm) diameter PC terminals for easy PCB assembly. Slides Terminal spacing conforms to standard .100" (2.54mm) PC board grid spacing. Touch Tilt Tactiles Molded-in terminals prevent entry of flux, solvents, and other contaminants. Supplement Accessories Indicators Actual Size www.nkk.com A25 PCB Mount Miniature Toggles A TYPICAL SWITCH ORDERING EXAMPLE Rockers Toggles Series D2 Programmable Illuminated PB Pushbuttons D220 1 2 Poles 1 SPDT 2 DPDT *4 4PDT Actuators No Code L Keylocks * Combines with ON-NONE-ON circuit only & not available with Right Angle Rotaries P .413" (10.5mm) Bat Lever .200" (5.1mm) Diameter Locking Lever Slides Circuits PC Terminals 2 ON NONE ON P Straight 3 ON OFF ON B Straight with Bracket 5 ON NONE (ON) H Right Angle w/Bracket 8 (ON) OFF (ON) V Vertical with Bracket 9 ON OFF (ON) Tilt Tactiles ( ) = Momentary DESCRIPTION FOR TYPICAL ORDERING EXAMPLE Touch D22012P Indicators .413" (10.5mm) Bat Lever Accessories SPDT ON-NONE-ON Circuit Supplement Straight PC Terminals A26 www.nkk.com A POLES & CIRCUITS Up Down Center Up Keyway Note: Pole Model SP D22012 D22013 D22015 D22018 D22019 ON ON ON (ON) ON NONE OFF NONE OFF OFF ON ON (ON) (ON) (ON) 2-3 OPEN 2-1 SPDT DP D22022 D22023 D22025 D22028 D22029 ON ON ON (ON) ON NONE OFF NONE OFF OFF ON ON (ON) (ON) (ON) 2-3 5-6 OPEN 2-1 5-4 DPDT D22042 ON NONE ON 2-3 5-6 8-9 11-12 Terminal numbers are not actually on the switch. 2 (COM) 3 1 2 (COM) 3 2-1 5-4 8-7 11-10 OPEN 4PDT 1 3 1 6 (COM) 5 2 5 11 8 9 4 6 4 7 12 10 Keylocks 4P Rockers Center Keyway Throw & Schematics Pushbuttons Down Connected Terminals ACTUATORS L Bat Lever .413" (5.1mm) Diameter Locking Lever 24 (5.1) Dia .201 Rotaries No Code .413" (10.5mm) 24 (10.5) .413 (8.0) .315 (19.4) .764 Material: Chrome over brass (4.6) Dia .181 (17.9) .705 Slides (2.8) Dia .110 Material: Chrome over brass M6 P0.75 (7.0) (6.1) .275 .240 B Straight with Bracket H Right Angle with Bracket V Vertical with Bracket Touch Tilt Straight Tactiles PC TERMINALS P Programmable Illuminated PB Toggle Position ( ) = Momentary Toggles Series D2 PCB Mount Miniature Toggles 24 Material: Polyethylene (5.0) Dia .197 Colors Available: ABCEFG (13.5) .532 AT427 Cap Supplied with Locking Lever 24 (4.8) Dia .189 (12.0) .472 Colors Codes: Colors Available: ABCEFG A Black B White (13.1) .516 C Red (11.5) .452 Material: Anodized Aluminum www.nkk.com F Green (8.0) .315 (19.4) .764 Colors Available: ACG E Yellow 24 (5.1) Dia .201 (17.9) .705 (4.6) Dia .181 Accessories Material: Polyethylene AT444 Bat Lever Conical Cap Supplement AT415 Bat Lever Cap Indicators OPTIONAL CAPS & CAP COLORS G Blue A27 Toggles Series D2 PCB Mount Miniature Toggles A TYPICAL SWITCH DIMENSIONS Rockers Straight PC * Single Pole (0.3) .012 M6 P0.75 Keyway 3 Keylocks Programmable Illuminated PB Pushbuttons 24 (2.8) Dia .110 (7.2) .283 (10.5) .413 (3.6) .142 (13.9) .547 (0.3) .012 (7.0) .276 M6 P0.75 Keyway 3 (5.08) Typ .200 (5.1) Dia .201 D22012P (6.1) .240 Actuator in Down Position Keyway (0.3) .012 M6 P0.75 Rotaries (5.08) Typ .200 (0.8) Dia Typ .031 (7.2) .283 Slides Tactiles (5.08) Typ .200 D22022LP (17.9) .705 (19.4) .764 (6.1) .240 (13.9) .547 Touch Indicators 1 (0.3) .012 3 6 2 5 1 4 (5.08) Typ .200 (1.0) Dia Typ .039 (3.6) .142 (0.3) .012 (5.08) Typ .200 (0.8) Dia Typ .031 (7.2) .283 (13.9) .547 12 9 6 3 11 8 5 2 10 7 4 1 (5.08) Typ .200 (5.08) Typ .200 (5.08) Typ .200 (17.9) .705 (19.4) .764 (0.8) Dia Typ .031 (6.1) .240 (13.9) .547 Actuator in Down Position www.nkk.com (0.3) .012 (22.6) .890 24 (5.1) Dia .201 (14.4) .567 (2.54)Typ .100 (3.6) .142 M6 P0.75 Keyway Accessories 4 (14.4) .567 M6 P0.75 Keyway (10.5) .413 A28 2 Actuator in Down Position (2.8) Dia .110 D22042LP 5 (0.8) Dia Typ .031 24 D22042P 3 (5.08) .200 24 (5.1) Dia .201 6 (5.08) .200 (12.4) .488 (3.6) .142 (13.9) .547 M6 P0.75 Keyway Straight PC * Four Pole (1.0) Dia Typ .039 (3.6) .142 (13.9) .547 (2.8) Dia .110 D22022P 1 (0.8) Dia Typ .031 (17.9) .705 (19.4) .764 D22012LP Straight PC * Double Pole (5.08) Typ .200 2 24 (10.5) .413 Tilt 1 (0.8) Dia Typ .031 24 Supplement (14.4) .567 2 (5.08) Typ .200 (3.6) .142 3 6 9 12 2 5 8 11 1 4 7 10 (5.08) Typ .200 (1.0) Dia Typ .039 (2.8) Dia .110 (2.54) Typ .100 (0.4) Typ .016 (6.2) Dia .244 3 (15.24) .600 (5.08) Typ .200 24 (1.0) Dia Typ .039 (0.8) Dia Typ .031 (3.6) .142 (14.3) .563 D22012B Actuator in Down Position (0.8) Dia Typ .031 Keyway (17.9) .705 (19.4) .764 1 (0.3) .012 3 6 2 5 1 4 (0.8) Dia Typ .031 (5.7) .224 (14.3) .563 (14.4) .567 (16.44) .647 (2.54) Typ .100 (15.24) .600 (5.08) Typ .200 (5.1) Dia .201 4 (0.4) Typ .016 24 (7.0) .276 2 (5.08) .200 (12.4) .488 (3.6) .142 (14.3) .563 3 5 (5.08) Typ .200 (7.62) Typ .300 (1.0) Dia Typ .039 (3.6) .142 D22022B Actuator in Down Position (6.2) Dia (0.4) Typ Keyway .244 .016 (15.24) .600 (5.08) Typ .200 24 (2.8) Dia .110 (0.8) Dia Typ .031 (10.5) .413 (7.0) .276 (6.8) .268 (14.3) .563 (7.0) .276 3 11 8 5 2 10 7 4 1 (0.8) Dia Typ .031 (5.7) .224 (14.3) .563 (14.4) .567 (2.54)Typ .100 (0.4) Typ .016 (15.24) .600 (5.08) Typ .200 (17.9) .705 (19.4) .764 6 (16.44) .647 (0.3) .012 (22.6) .890 24 (5.1) Dia .201 9 (5.08) Typ .200 Straight PC * Bracket Four Pole (0.3) .012 12 (3.6) .142 (6.2) Dia .244 Keyway (5.08) .200 (0.7) Typ .028 D22022LB (3.6) .142 (2.54) Typ .100 (5.08) Typ .200 3 6 9 12 2 5 8 11 1 4 7 10 (5.08) Typ .200 (7.62) Typ .300 (1.0) Dia Typ .039 D22042B Actuator in Down Position www.nkk.com Tilt (6.8) (10.5) .268 .413 (6.2) Dia .244 6 Tactiles (2.8) Dia .110 Straight PC * Bracket Double Pole (0.3) .012 Rotaries (15.24) .600 (5.08) Typ .200 24 (7.0) .276 (5.08) .200 (0.7) Typ .028 Slides (6.2) Dia (0.4) Typ Keyway .244 .016 D22012LB Touch (5.7) .224 Indicators (17.9) .705 (19.4) .764 (7.62) Typ .300 1 Accessories (5.1) Dia .201 (5.08) Typ .200 2 D22042LB A29 Supplement Keyway (0.3) .012 (7.0) .276 (3.6) .142 (14.3) .563 (16.44) .647 1 (0.8) Dia Typ .031 (6.8) .268 (10.5) .413 (14.4) .567 2 Pushbuttons 24 Programmable Illuminated PB 3 (15.24) .600 (5.08) Typ .200 Straight PC * Bracket Single Pole (0.7) Typ .028 Keylocks (5.08) .200 (0.4) Typ (6.2) Dia Keyway .016 .244 Rockers A TYPICAL SWITCH DIMENSIONS Toggles Series D2 PCB Mount Miniature Toggles Toggles Series D2 PCB Mount Miniature Toggles A TYPICAL SWITCH DIMENSIONS Rockers Right Angle PC * Single Pole (6.2) Dia .244 Keyway Pushbuttons (0.3) .012 (2.8) Dia .110 (3.5) .138 (0.4) .016 (0.9) .035 (15.24) .600 (0.7) Typ .028 (10.5) .413 Programmable Illuminated PB (5.08) .200 (7.7) .303 (3.5) .138 (0.8) Dia .031 2 (7.0) .276 3 (0.3) .012 (0.3) .012 (5.08) Typ .200 (14.4) .567 D22012H (6.2) Dia .244 Keyway (5.08) Typ .200 3 (0.3) .012 2 1 (15.24) .600 Keylocks (5.1) Dia .201 (3.5) .138 (0.7) Typ .028 (5.08) .200 Rotaries Slides 1 (6.6) .260 D22012LH (0.4) .016 (0.9) .035 (15.24) .600 (3.5) .138 (0.8) Dia .031 (1.0) Dia Typ .039 (2.54) Typ .100 Actuator in Down Position Right Angle PC * Double Pole (6.2) Dia .244 Tactiles Keyway (0.3) .012 4 5 6 1 2 3 (12.4) .488 (2.8) Dia .110 (3.5) .138 Tilt (0.7) Typ .028 (5.08) .200 (10.5) .413 (7.7) .303 (0.4) .016 (0.9) .035 (15.24) .600 (0.5) (3.5) .020 .138 (0.8) Dia Typ .031 (2.54) .100 (0.3) .012 (0.3) .012 (5.08) Typ .200 (14.4) .567 Touch D22022H (6.2) Dia .244 Indicators Keyway Accessories (0.3) .012 (5.1) Dia .201 (0.7) Typ .028 Supplement (6.6) .260 D22022LH A30 (0.4) .016 (0.9) .035 (15.24) .600 Actuator in Down Position www.nkk.com 5 4 3 2 1 (15.24) .600 (3.5) .138 (5.08) .200 6 (5.08) Typ .200 (2.54) .100 (0.5) (3.5) .020 .138 (0.8) Dia Typ .031 (2.54) .100 (2.54) Typ .100 (1.0) Dia Typ .039 A TYPICAL SWITCH DIMENSIONS Vertical PC * Single Pole (0.3) Typ .012 3 (5.08) .200 (10.5) .413 (7.7) .303 (0.4) .016 (0.9) .035 (15.24) .600 (0.5) .020 (0.8) Dia Typ .031 (2.54) Typ .100 Pushbuttons 1 (1.0) .039 (2.8) Dia .110 (3.5) .138 (0.7) Typ .028 (14.4) .567 2 (3.5) .138 (0.3) .012 Programmable Illuminated PB 24 (0.3) .012 (7.0) .276 D22012V (6.2) Dia .244 3 (2.54) Typ .100 2 (17.9) .705 (19.4) .764 (6.6) .260 (0.5) .020 (0.8) Dia Typ .031 (2.54) Typ .100 (2.54) Typ .100 (1.0) Dia Typ .039 D22012LV Actuator in Down Position Vertical PC * Double Pole (6.2) Dia .244 (0.3) .012 24 (0.3) .012 (3.5) .138 (1.0) .039 (2.8) Dia .110 (3.5) .138 (0.7) Typ .028 (10.5) .413 (5.08) .200 (7.7) .303 (0.4) .016 (0.9) .035 (15.24) .600 (0.5) .020 (0.8) Dia Typ .031 (2.54) Typ .100 6 3 5 2 4 1 (14.4) .567 (0.3) .012 (5.08) .200 (12.4) .488 Tilt Keyway Tactiles (5.08) .200 (0.4) .016 (0.9) .035 (15.24) .600 (15.24) .600 Keylocks (5.1) Dia .201 (3.5) .138 (0.7) Typ .028 1 (3.5) .138 (1.0) .039 Rotaries 24 (0.3) .012 D22022V Touch Keyway Slides (6.2) Dia .244 Keyway Rockers Toggles Series D2 PCB Mount Miniature Toggles (0.3) .012 (3.5) .138 (1.0) .039 (5.1) Dia .201 (3.5) .138 (0.7) Typ .028 (5.08) .200 (17.9) .705 (19.4) .764 (6.6) .260 (0.4) .016 (0.9) .035 (15.24) .600 (0.5) .020 (0.8) Dia Typ .031 (2.54) Typ .100 5 1 4 (2.54) Typ .100 (15.24) .600 Accessories 24 6 2 (2.54) Typ .100 (1.0) Dia Typ .039 Supplement 3 Indicators (6.2) Dia .244 Keyway D22022LV Actuator in Down Position www.nkk.com A31 Toggles Series D2 PCB Mount Miniature Toggles A TYPICAL SWITCH DIMENSIONS Vertical PC * Four Pole Rockers Pushbuttons (0.3) .012 24 (0.3) .012 (3.5) .138 (1.0) .039 (2.8) Dia .110 (3.5) .138 Programmable Illuminated PB (0.7) Typ .028 (10.5) .413 (5.08) .200 (7.7) .303 12 9 6 3 11 8 5 2 10 7 4 1 (0.3) .012 (0.5) .020 (0.8) Dia Typ (5.08) Typ .031 .200 (2.54) Typ .100 (0.4) .016 (0.9) .035 (15.24) .600 (14.4) .567 (2.54)Typ .100 (22.6) .890 D22042V (6.2) Dia .244 Keyway 3 24 Keylocks (0.3) .012 (3.5) .138 (17.9) .705 (19.4) .764 (5.08) .200 Rotaries (3.5) .138 (1.0) .039 (5.1) Dia .201 (0.7) Typ .028 D22042LV (6.6) .260 6 9 (5.08) Typ .200 (2.54) Typ .100 12 2 5 8 11 1 4 7 10 (15.24) .600 (0.5) .020 (0.8) Dia Typ .031 (2.54) Typ .100 (0.4) .016 (0.9) .035 (15.24) .600 (2.54) Typ .100 (1.0) Dia Typ .039 Actuator in Down Position STANDARD HARDWARE AT513M Hex Nut Brass with nickel plating 2 supplied Tactiles Slides (6.2) Dia .244 Keyway AT507M Locking Ring Steel with zinc/chromate 1 supplied OPTIONAL AT509 Lockwasher Steel with zinc/chromate 1 supplied AT501M Knurled Face Nut Brass with chrome plating (6.0) Dia .236 M6 P0.75 (8.0) .315 (12.0) Dia .472 Tilt (2.0) .079 M6 P0.75 (6.4) Dia (10.2) Dia .252 .402 (10.0) Dia .394 (0.5) .020 (1.7) .067 (5.5) .217 Touch (9.0) .354 (1.5) .059 (1.7) .067 (0.8) .031 Supplement Accessories Indicators PANEL CUTOUTS & MAXIMUM PANEL THICKNESS With Standard Hardware .087" (2.2mm) for Standard Lever .051" (1.3mm) for Locking Lever A32 (6.5) Dia .256 (2.2) Dia .087 (6.5) .256 Without Bottom Hex Nut Without Locking Ring .154" (3.9mm) for Standard Lever .118" (3.0mm) for Standard Lever .110" (2.8mm) for Locking Lever .083" (2.1mm) for Locking Lever www.nkk.com Without Locking Ring & Bottom Hex Nut (5.6) .220 (6.5) Dia .256 (0.6) .024 .185" (4.7mm) for Standard Lever .142" (3.6mm) for Locking Lever Notes www.nkk.com A33