Features LED DRIVER 60W Class II AC-DC LED Power Supply Constant Current Operation Power Factor Corrected Universal Input Voltage Range User Adjustable Current Limit (/OF) Thermal Feedback Dimming (/TOF) Waterproof Enclosure (/IP67) cUL/UL8750 Certified, CE Marked Class 2 Power Unit UL1310 High Efficiency Long 5 Year Warranty Description LIGHTLINE AC/DC-Converter with 5 year Warranty 60 Watt PFC Single Output The RACD60 is a compact universal input voltage 60W constant current power module suitable for driving high power LEDs. The RACD60 series have active power factor correction, universal input voltage range and are fully protected against output short circuit, overload and over-temperature. Three versions are available: a low cost open-frame with either internal (/OF) or external user-adjustable current limit (/TOF), and a sealed IP67 potted version (/IP67) with factory set output currents for outdoor or high humidity applications. The LED driver is a class II power supply with CSA, UL and CE certifications and comes with a five year warranty. Selection Guide Part Number Output Voltage Range (min - max)** Output Current Range (min - max) Factory Set Current Limit Efficiency (230VAC) Typ. Output Power Range RACD60-700* 38 - 54V 700 - 1100mA 0.7A 89% 27-60W RACD60-1050* 38 - 54V 700 - 1100mA 1.0A 89% 27-60W RACD60-1400* 21 - 28V 1400 - 2140mA 1.4A 89% 30-60W RACD60-2100* 21 - 28V 1400 - 2140mA 2.1A 89% 30-60W RACD60-2400* 17 - 24V 2150 - 2500mA 2.4A 87% 30-60W RACD60-4200* 11 - 13.5V 3570 - 4200mA 4.2A 85% 40-60W * use suffix /OF for open frame version (standard) - output current limit adjustable with on-board trimmer * use suffix /TOF for open frame version with thermal feedback - output current limit externally adjustable. * use suffix /IP67 for waterproof potted version - fixed output currents only E340696 RoHS 2011/65/EU 6/6 UL 8750 Certified cUL 8750 Certified* EN 61347 Certified ** adjustable output current range at potentiometer (only /OF types) RACD60 ordering examples: RACD60-700/OF= open frame, adustable current limit preset to 700mA. RACD60-1050/TOF=open frame,1050mA, adjustable 700-1050mA with ext. voltage or PWM signal. RACD60-1400/IP67 = enclosed IP67 waterproof, non-adjustable 1400mA output. Note: all currents within range are available - use RACD60-xxxx/IP67 where xxxx is the desired fixed current e.g. RACD60-900/IP67 = enclosed IP67 waterproof, non-adjustable 900mA output. * except 700mA/1100mA Versions Input Voltage Derating (Ta=25C) Specifications (typical at 25C and after warm up time unless otherwise specified ) All Versions 90-264VAC Rated Power 60 Watts max. 125 50/60 Hz 100 Input Frequency Range All Versions Power Factor Correction Full Load, 115VAC/230VAC THD Full Load, 115VAC 17% max. Full Load, 230VAC 20% max. > 0.9 Input Current (full load) 115VAC/230VAC 0.8A / 0.4A max. Inrush Current (cold start) 115VAC/230VAC 25A / 50A max. Leakage Current 230VAC/63Hz Input Fuse Built-in Output Current Accuracy Full load Output Current Adjust Preset Potentiometer (/OF) Line Voltage Regulation LL to HL at Full Load 4% typ. Load Voltage Regulation 60% to 100% Load 5% typ. <0.7mA max. 3.15A Slow Blow 5% 75% to 100% approx. External Voltage (/TOF) Minimum Load Current Operating Frequency see table All Versions 65kHz typ. Output Power (%) Input Voltage Range 75 50 25 0 230 264 90 115 Input Voltage (VAC) Note: All LED Drivers may not be used without a load. They must be switched on the primary side only. Noncompliance may damage the LED or reduce its lifetime. Refer to Application Notes continued on next Page L-50 REV: 0/2015 www.recom-power.com RACD60 Series LIGHTLINE AC/DC-Converter Specifications (typical at 25C and after warm up time unless otherwise specified ) Efficiency at Full Load see Selection Guide Isolation Voltage (60Hz RMS) input to output 3.75kVAC / 1 minute input to filter ground 1880VAC / 1 minute output to filter ground 500VAC / 1 minute Temperature Coefficient All Versions 0.02%/C typ. Overload Protection All Versions 105% typ. Short Circuit Protection Continuous, Hiccup, Automatic Restart Open Circuit Output Voltage 4200mA 19VDC (Zener Diode Clamp) 2400mA 25VDC Typical Values 2100mA/1400mA 29VDC Output Current Adjust (/TOF only) External Voltage (1-10V) Operating Temperature Range free air convection, with derating (refer to derating graphs) Case temperature (/IP67) 1050mA/700mA 55VDC 10.5V max. External PWM (10V) 300Hz max. -30C to +70C 85C max. Storage Temperature Range -40C to +85C Humidity non-condensing Environmental Protection Open Frame (/OF, /TOF) 95% RH max. Indoor Use Only Potted Version (/IP67) IP67 PCB Material Plastic Resin with Fibreglass (UL94V-0) Weight Open Frame (/OF, /TOF) 165g Potted Version (/IP67) 200g Packing Quantity 1pc EMC EN 55015, EN61347-1, EN61347-2-13 Certified to meet EN 61000-3-2 (Class C, Full load) and EN 61000-3-3 MTBF Safety Standards (using MIL-HDBK-217F, 25C) LED Lighting Safety LED Lighting Safety (Canada) Class 2 Power Supply Safety Extra Low-Voltage Class 2 Output LED equipment for lighting application CE LVD Directive -all models Input/Output Connections /OF 583 x 10 hours UL8750 cUL8750 UL1310 CSA C22.2 No. 223-M91 CSA C22.2 No. 250.13-12 EN61347 Report: E34696 Report: E34696 Report: E34696 Report: E34696 Report: E34696 Pin Header (suitable matching connector JST VHR or similar) . /IP67 340mm Cable 20mm /TOF Output Current Adjustment Normalised Output current (%) 1.0 The /TOF offers the possibility to derate the output current with an external voltage or PWM signal. Thermal feedback derating is an effective way to reduce the LED current at high temperatures to avoid over-stressing the LED. 0.5 N RACD60-xxxx/TOF FG -Com Select R1/RT so that thermal derating starts at around 75C, e.g. for RACD601050 with 15 LEDS and a 100k (@25C) thermistor: R1=33k. www.recom-power.com LED Current RACD60-1400/TOF RACD60-1100/TOF 0 0% 6 8 4 2 60% 80% 40% 20% Input Voltage (V) or PWM Duty Cycle (%) 10 100% 100% Dim +Vout RACD60-2400/TOF 0.75 SIMPLE THERMAL FEEDBACK DIMMING CIRCUIT L RACD60-4200/TOF R1 1st LED 50% thermal contact 10V Last LED RT NTC 25 35 45 55 65 75 85 95 105 Thermistor Temperature (C) REV: 0/2015 L-51 RACD60 Harmonics RACD60 Series LIGHTLINE AC/DC-Converter Typical Characteristicsv Maximum Number of LED drivers per circuit breakers Condition Circuit Breaker 115VAC, 1Ohm 90 phase angle 230VAC, 1Ohm 90 phase angle 277VAC, 1Ohm 90 phase angle Circuit Breaker Current Typ 10A 16A 20A 25A C 12 20 24 31 B 13 21 25 32 C 21 35 41 51 B 15 24 29 37 C 24 40 47 58 Package Style and Pinning RACD60-xxxx/OF and RACD60-xxxx/TOF 28.0 101.6 FG FG CN1 CN2 3 4 5 2 1 45 50.8 Current Limit FG O3,1mm Use M3 Mounting Screws 95.3 25.5 Pin Connections Pin # 28.0 /OF /TOF 1 VAC in (L) VAC in (L) 2 VAC in (N) VAC in (N) 3 NC Thermal feedback 4 +VDC Out +VDC Out 5 -VDC Out Com Filter Ground connection via mounting holes Dimension Tolerance 0.25 mm Package Style and Pinning RACD60-xxxx/IP67 118 5 40 35 11 Tc 300mm Cable use M3 or 3 x 30 fixing screws 38 60 300mm Cable 2 110 Wire Connections 124.5 L-52 Wire Function Brown VAC in (L) Blue VAC in (N) Red +VDC Out Black -VDC Out Dimension Tolerance 0.25 mm REV: 0/2015 www.recom-power.com RACD60 Series LIGHTLINE AC/DC-Converter Derating Graphs RACD60 -xxxx/OF RACD60 -xxxx/TOF RACD60 -xxxx/IP67 125 Natural Convection 100 All others 75 Output Power (%) Output Power (%) 125 4.2A 50 40 All others 75 4.2A 50 40 25 25 0 Natural Convection 100 -30 0 0 50 60 70 80 90 50 60 70 80 90 -30 0 Ambient Temperature Range (C) Ambient Temperature Range (C) Application Information LEDs are typically wired in series to make a string of LEDs and then the strings can be wired in parallel to generate enough light. If only two or three strings are wired in parallel then it is recommended to add resistors (e.g. 0.5R) to each string to help balance out the LED currents in each string. All strings must share a common heatsink for better current matching. 1st LED Last LED String 1 1st LED Last LED String 2 RACD60 1st LED Last LED String n A typical 1W high brightness white LED has a forward voltage of around 3.3V at its operating temperature and draws 350mA. Thus each LED actually draws about 1.15W. Similarly, 3W white LEDs have usually the same forward voltage but can be run at 700mA or more. Using the LED datasheet specification, the optimum LED arrangement and the best driver for each application can be worked out. The tables below show some examples. Other LED combinations may have different forward voltages at their recommended operating currents. 1W LEDS 24 26 28 30 33 35 35 36 39 42 42 42 45 LED Arrangement 2 Strings of 12 2 Strings of 13 4 Strings of 7 3 Strings of 10 3 Strings of 11 5 Strings of 7 7 Strings of 5 3 Strings of 12 3 Strings of 13 3 Strings of 14 7 Strings of 6 14 Strings of 3 3 Strings of 15 AC/DC Driver RACD60-700 RACD60-700 RACD60-1400 RACD60-1050 RACD60-1050 RACD60-2100 RACD60-2400 RACD60-1050 RACD60-1050 RACD60-1050 RACD60-2400 RACD60-4200 RACD60-1050 3W LEDS 12 14 18 18 LED Arrangement 12 in series 2 Strings of 7 3 Strings of 6 6 Strings of 3 High Power LEDs Cree CXA2011 Cree XM-L Lumiled Rebel Osram Dragon Bridgelux RS Helieon LED Arrangement Single Array 6 in series 13 in series 14 in series Single Array Single Module AC/DC Driver RACD60-700 RACD60-1400 RACD60-2100 RACD60-4200 AC/DC Driver RACD60-1050 RACD60-2100 RACD60-700 RACD60-1050 RACD60-2100 RACD60-1400 The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM's explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV: 0/2015 L-53 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: RECOM: RACD60-1050/IP67 RACD60-1400/IP67 RACD60-2100/IP67 RACD60-2400/IP67 RACD60-2400/OF RACD604200/IP67 RACD60-700/IP67 RACD60-1050/OF RACD60-2100/OF RACD60-4200/OF RACD60-700/OF RACD601400/OF RACD60-4200/TOF RACD60-2400/TOF RACD60-2100/TOF RACD60-1050/TOF