we Ae SHEA st Sm (mie NINE 4 eee? Sd Ren ey Aap: Fine ie I ei - a a SANDVIK Article code structure The importance of easily being able to identify the Sandvik file in catalogues or in the warehouse has been the main factor behind the Sandvik code structure. The code is logically built with an identifying piece of information in each digit. The majority of Sandvik files fits into the code Structure explained below. The example is describing the eight inch 106 Oberg cut. The files product number In the catalogue these three digits are given together with a verbal descripton of the file. The type of file 1 = engineering files 2 = needle files 3 = Milled tooth files and PANSAR blades 4 = sharpening files 6 = rasps The length of the file in inches For needle files the length is given incm. The packaging of the file O = industrial ten pack 2 = single packed files with ERGO handle 3 = industrial six pack with ERGO handle The coarseness of the cut For engineering and sharpening files: 1 = Bastard 2 = Second 3 = Smooth For needle files: O = Bastard 1 = Second 2 = Smooth 4 = Dead smooth For rasps: 1 = Coarse 2 = Medium 3 = Fine| SANDVIK Practical packaging for industrial deliveries Industry pack, with handle Sandvik is the first file manufacturer to offer a complete handled file assortment to the professional user. The file is equipped with the Ergo handle which is ergonomically designed to reduce muscle tension and the risk of injury. The handle has a comfortable non-slip grip and its smooth contours reduce the pressure in the palm of the hand. The handle is asymmetric to help identify which side of the file is being used, and it has an incorporated hanging hole. A very important safety feature is that the handle covers the file tang and the sharp shoulder of the file completely, thus preventing the hand from slipping on to any sharp file edge. The handled files for industrial distribution are packed six files in a strong cardboard box. Each file is individually packed in a reusable sleeve. A label is placed on the front with product information for easy identification and handling throughout the distribution chain. Industry pack, unhandled The traditional assortment of unhandled files remains in the assortment and they are packed 10 files per box. The outside of the box features the Sandvik black and orange identity. A label is placed at the end of the box for easy reading. Each labet is clearly printed with article code, bar code anda short description of the file. Boxes containing unhandled engineering files and rasps are marked with colour labels that correspond to international standards: EE = cut 1 (bastard) Yellow = cut 2 (second) PE = cut 3 (smooth) The boxes with sharpening and needle files are marked with white labels.SSANDVIK. Informative packaging for display racks Sandvik consumer research indicates that a number of aspects are important for file packaging in consumer outlets. The customer would like: * to be able to see and touch the file - * to be able to grip the handle to easily understand which are the most suitable applications to have information on how to choose the right file to receive the product in an recyclable packaging Most packages in the market today meet only one or two of these demands, but Sandvik has designed a new packaging concept that meets all five demands. The packaging provides high visual impact with special attention drawn to the unique ERGO handle. The colour coding on the packaging gets the customer started in the right direction. This visual coding makes it possible to immediately focus on the group of files most suitable for the job at hand. The images on the packaging are also repeated on display signs and printed material for consistent and direct communication. E y VRS Biue colour for Metal Orange colour for Sharpening Yellow colour for Wood SANDVIK a OBERG Further information about the best applications for each file is given on the back of the card. Each packaging has the bar code clearly printed for easy handling and stock control. The Sandvik single packed files are packed five per box.Description of Sandvik files Type/Shape fm ee eo; ee Length _ File length _. Tooth type and cut Z roe aE. Double Oberg aN teaadaag x eee ghd dddid Diagonal Pansar Rasp YG Hy Milled ns peo 59% : << : me Bes al os cm inch cm? it eee SANDVIK BE It is the shape and size of the workpiece, the material from which it is made and the desired finish that determine the choice of file. On the following pages you will find information on the areas of application of the different files. Hand files are divided into four main areas: engineering files, needle files, sharpening files and milled files (including PANSAR blades). The Sandvik range covers all these areas meeting requirements of most national and international standards with ample margin. The different names given to files vary according to their shape and use. The most common names are: hand, flat, half round, three square, round, square, knife and double edge. The Sandvik range includes files from 4" (100 mm) in length to 14" (350 mm), depending on type. The most suitable file length depends entirely on the work to be done. The length of the file is always given exclusive of the tang, with exception of needle files where the total length includes the tang. The toothing of a file can vary in many different ways. Different types of cut are chosen depending on the work material, the desired rate of material removal and the desired finish. The most common cuts are: single cut, double cut, Oberg cut, diagonal cut, milled cut, PANSAR and rasp cut. For all cut engineering, needle and sharpening files, the coarseness of the cut is given in number of whole teeth per centimetre along the length of the file. The most common degrees of coarseness are bastard, second and smooth. The main rule is that the coarser the cut, the more material is removed. lf, however, a particular work operation requires a smooth finish, a file with a smooth cut should be chosen. For diagonal files, milled files and PANSAR blades, the degree of coarseness is given in number of whole teeth per inch ("). The coarseness of the rasps is given in number of tooth tips per cm.SANDVIK, Choose a file according to the work operation Single cut Double cut Oberg cut | Diagonal Milled Rasp Pansar Bastard | Second | Smooth mw | @)| C@ e Sharpening esging a ee Edging Rough filing @ @ e Material removal Choose a file according to the work material Pansar Single cut Double cut Oberg cut Diagonal High alloy steel } Unhardened @ steel . Cast iron Bastard | Second | Smooth Brass, bronze 6 @ @ @@ 0 Aluminium Ceeec eee e Wood and hard plastics @8 606 @ eo @ @ wo = best choice, recommended | we = good choice, adequateISANDVIK| EE Choosing triangular taper files for different types of saw When you are going to sharpen a saw, remember that a hardpoint saw cannot be filed. Use the longest file possible for smooth and efficient filing. In choosing a file for sharpening a saw, it is important to know the pitch of the saw, which is usually given in number of whole teeth per inch. tooth pitch number of whole teeth per inch | | be c VM 1 2 3 4 5 Number of teeth per inch in drawing = 5 tpi The following rule applies to choosing triangular taper files for universal and rip-toothed saws, especially for band saws: A>a+b Saw file table Universal and cross-toothed hand saws EEL EEL Band saw blades Teeth/ File type No./length Teeth/ Edge File type No.Aength inch 183 | 186 | 187 | 188 | 190 inch | radius | 499 202 203 204 21/0 10" 2/2 1,4 81/2" 3 8" 3 1,3 8" 81/2" 31/2 7" 31/2 1,2 7 4 6" 8" 4 1,1 6" Ato 5" 8" 41/2 1,0 5" 5 5 7 5 0,7 81/2" 6 4" 6" 7" 7 5" 6" 8" Straight-toothed saws 8 Ss" 5" 6" e MAA AAAAAAAAAAAAAAAADAAA, 9 4" 5" 6" 6" 10 4" 5" \ ! 11 5 12, 13 4" : : 14.15 4" Teeth/inch File type No./length 31/2-4 8" double edge saw file 270 41/2-5 5" double edge saw file 270 or 6" doubie edge saw file Wasa272, 273 51/2-8 5 or 6" double edge saw file Wasa272, 273SANDVIK 2 es A Table of flat sharpening files Flat sharpening files are intended primarily for sharpening steel saw blades. They are also very useful as engineering files and sharpening files for different types of edge tool. As engineering files, they are ideal for all types of work operation where a high surface finish is required. Cross section of file File No. Use 138 These files are primarily intended for sharpening various types of saw ey 144 blades. The files are also suitable for polishing, deburring work, Flat files with material removal and draw filing. 1 round edge and 1 straight edge 140 A file developed especially for circular and band saw blades as well as for felling and gang saws with fine toothing. This file can also be used Fiat files with for rounding the gullets. 2 round edges 142 A universal sharpening file for agricultural tools such as axes and hoes. coy The file can also be used for polishing and deburring work in lathes. Flat files with 2 straight edges Circular and felling saws Tooth shapes A and D Tooth shapes F and C Tooth pitch File length Tooth pitch File length mm inch mm mm inch mm 39-44 14 350 26-31 14 350 32-38 12 300 21-25 12 300 26-31 10 250 17-20 10 250 91-25 8 200 13-16 8 200 17-20 6 150 10-12 6 150 93ee i Use Hand fi le For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. 1-100 Shape tl Edges and surfaces parallel. Surfaces double cut, one edge uncut, one edge single cut. Type of cut: 1 = Bastard, 2 = Second, 3 = Smooth. Product | EAN code Dimensions Teeth Type code... ..97311514+>-. ey length section per of . 6,0 ergo . an mm inch mm cm cut Industry pack, with handle 1-100-06-1-3 8202538 6 150 6 16x4 13 1 110 1-100-06-2-3 = 8202545 6 150 6 16x4 18 2 110 1-100-06-3-3 8202552 6 150 6 16x 4 22 3 110 Pl) 1-100-08-1-3 8202569 6 200 8 20x5 10 1 200 1-100-08-2-3 8202576 6 200 8 20x5 14 2 200 1-100-08-3-3. 8202583 6 200 8 20x5 18 3 200 1-100-10-1-3. 8202590 6 250 10 25x55 9 1 310 1-100-10-2-3 8202613 6 250 10 25x5,5 12 2 310 1-100-10-3-3 8202644 6 250 10 25x55 16 3 310 1-100-12-1-3 8202668 6 300 12 30x 6 8 1 431 1-100-12-2-3 8202682 6 300 12 30 x6 11 2 431 1-100-12-3-3. =. 8202712 6 300 12 30 x6 14 3 431 1-100-04-1-0 8019006 10 100 4 12x3 17 1 30 Industry pack, unhandled 1-100-04-2-0 8019013 10 100 4 12x3 22 2 30 1-100-04-3-0 8019020 10 100 4 12x3 28 3 30 ee 1-100-06-1-0 8019037 10 150 6 6x4 ~~ 13 1 73 1-100-06-2-0 8019044 10 150 6 16x4 18 2 73 1-100-06-3-0 8019051 10 150 6 16x4 22 3 73 1-100-08-1-0 8019068 10 200 8 20x5 10 1 145 1-100-08-2-0 8019075 10 200 8 20x5 14 2 145 1-100-08-3-0 8019082 10 200 8 20x5 18 3 145 1-100-10-1-0 8019099 10 250 10 25x55 9 1 250 1-100-10-2-0 8019105 10 250 10 25x5,5 12 2 250 1-100-10-3-0 8019112 10 250 10 25x55 16 3 250 1-100-12-1-0 8019129 5 300 12 30 x6 8 1 392 1-100-12-2-0 8019136 5 300 12 30 x6 11 2 392 1-100-12-3-0 8019143 5 300 12 30 x6 14 3 392 1-100-14-1-0 8019150 5 350 14 35 x 6,5 7 1 605 1-100-14-2-0 8019167 5 350 14 35x65 10 2 605 e@rgo) Single pack carded 1-100-06-1-2. 8000233 5 150 6 16x4 13 1 110 1-100-06-2-2 8003593 5 150 6 16x4 18 2 110 1-100-08-1-2 8000264 5 200 8 20x5 10 1 200 > 1-100-08-2-2 8003609 5 200 8 20x5 14 2 200 1-100-10-1-2 8000295 5 250 10 25x 5,5 9 1 310 1-100-10-2-2 8003616 5 250 10 25x55 12 2 310 1-100-12-1-2 8028053 5 300 12 30 x 6 8 1 431SANDVIK Use i For the same jobs as the hand file 100, but is sometimes preferred because its Flat file pointed shape enables the user to reach more easily into angles and corners. Shape ae 1-110 Edges tapered towards the point, surfaces parallel. Surfaces double cut, edges single cut. 4" and 6" pointed, 8" and longer semi-pointed. Type of cut: 1 = Bastard, 2 = Second, 3 = Smooth. Product EAN code: code 7311514". . | =. Section per Oo mm inch mm == cm @rgm* 1-110-06-1-3 8203146 6 150 6 16x4 13 1 110 Industry pack, with handle 1-110-06-2-3 8203153 6 150 6 16 x4 18 2 110 1-110-06-3-3 8203160 6 150 6 16x4 22 3 110 1-110-08-1-3 8203177 6 200 8 20x5 10 1 180 > 1-110-08-2-3 8203184 6 200 8 20x5 14 2 180 1-110-08-3-3 8203191 6 200 8 20x5 18 3 180 1-110-10-1-3. 8203207 6 250 10 25x55 9 1 270 1-110-10-2-3. = 8203214 6 250 10 25x55 12 2 270 1-110-10-3-3 8203221 6 250 10 20x55 16 3 270 4-110-12-1-3 8203238 6 300 12 30x6 8 1 413 1-110-12-2-3 8203245 6 300 12 30x6 11 2 413 1-110-12-3-3 8203252 6 300 12 30x6 14 3 413 4-110-04-1-0 8019334 10 100 4 12x3 17 1 27 1-110-04-2-0 8019341 10 100 4 12x3 22 2 27 Industry pack, unhandled 1-110-04-3-0 8044046 10 100 4 12x3 28 2 27 1-110-06-1-0 8019358 10 150 6 16x4 13 1 60 i 1-110-06-2-0 8019365 10 150 6 16x4 18 2 60 1-110-06-3-0 8019372 10 150 6 16x4 22 3 60 1-110-08-1-0 8019389 10 200 8 20x5 10 1 130 1-110-08-2-0 8019396 10 200 8 20x5 14 2 130 1-110-08-3-0 8019402 10 200 8 20x5 18 2 130 1-110-10-1-0 8019419 10 250 10 25%x5,5 9 1 245 1-110-10-2-0 8019426 10 250 10 25x55 12 2 245 1-110-10-3-0 8019433 10 250 10 20x55 16 3 245 1-110-12-1-0 8019440 5 300 12 30x6 8 1 368 1-110-12-2-0 8019457 5 300 12 30x6 11 2 368 1-110-12-3-0 8019464 5 300 12 30x6 14 3 368 1-110-14-1-0 8019488 5 350 14 35x65 7 1 570 ergo* 1-110-08-1-2 8000332 5 200 8 20x5 10 1 180 1-110-08-2-2 8003630 5 200 8 20x5 14 2 180 1-110-10-1-2. 8000349 5 250 10 25x55 9 1 270 > 1-110-10-2-2 8003647 5 250 10 25x55 12 2 270 97SANDVIK Use , For deburring and filing angles and inner corners. For filing of holes and large fillets as Th ree square fi le well as concave surfaces. Its tapered surfaces make it well suited for flat filing. Sh ape Equilateral triangle. Tapered towards the point. Double cut surfaces. ix 1 -1 70 Type of cut: 1 = Bastard, 2 = Second, 3 = Smooth. Product . EAN code __ Dimensions Teeth Type eo. code 7311514 S&7 length section per of OO Ss mm inch =omm cm cut ergo 1-170-06-1-3 8202651 6 150 6 11 13 1 103 Industry pack, with handle 1-170-06-2-3 8202675 6 150 6 W 18 2 103 1-170-06-3-3 8202699 6 150 6 11 22 3 103 1-170-08-1-3 8202705 6 200 8 15,5 10 1 203 1-170-08-2-3. 8202767 6 200 8 15,5 14 2 203 1-170-08-3-3. 8202774 6 200 8 15,5 18 3 203 1-170-10-1-3 8202781 6 250 10 17,5 9 1 295 1-170-10-2-3. 8202798 6 250 10 17,5 12 2 295 | 1-170-10-3-3. 8202804 6 250 10 17,5 16 3 295 | 1-170-12-1-3 8202811 6 300 12 19,5 8 1 420 ; 1-170-12-2-3 8202828 6 300 12 19,5 11 2 420 : 1-170-04-2-0 8019945 10 100 4 6,2 22 2 19 Industry pack, unhandled | 1-170-04-3-0 8019952 10 100 4 6,2 28 3 19 | 1-170-06-1-0 8019969 10 150 6 WW 13 1 57 1-170-06-2-0 8019976 10 = 150 6 11 18 2 5 Qe t 1-170-06-3-0 8019983 10 150 6 11 22 3 57 | 1-170-08-1-0 8019990 10 200 8 15,5 10 1 160 i 1-170-08-2-0 8020002 10 200 8 15,5 14 2 160 1-170-08-3-0 8020019 10 200 8 15,5 18 3 160 1-170-10-1-0 8020026 10 250 10 17,5 9 1 245 | 1-170-10-2-0 8020033 10 250 10 17,5 12 2 245 1-170-10-3-0 8020040 10 250 10 17,5 16 3 245 1-170-12-1-0 8020057 5 300 12 19,5 8 1 370 1-170-12-2-0 8020064 5 300 12 19.5 11 2 370 ergo) 1-170-06-2-2. 8003715 5 150 6 11 18 2 103 Single pack carded 1-170-08-1-2 8000417 5 200 8 15,5 10 1 203 1-170-08-2-2 8003722 5 200 8 15,5 14 2 203 1-170-10-1-2. 8028107 5 250 10 17,5 9 1 295 { ! | ee 101SAND 1-210 ergo Industry pack, with handle n> Industry pack, unhandled erao Single pack carded na > VIK Half-round file Use For filing concave and flat surfaces and large holes. Suitable for deburring work. Shape Edges and surfaces tapered towards the point. 4" and 6" fully pointed, 8" and longer semi-pointed. Double cut. Type of cut: 1 = Bastard, 2 = Second, 3 = Smooth. 7311514 * 1-210-06-1-3 8202736 6 150 6 16x47 13 1 100 1-210-06-2-3 8202835 6 150 6 16x47 18 2 100 1-210-06-3-3 8202842 6 150 6 16x4,7 22 3 100 1-210-08-1-3 8202859 6 200 8 205x6 10 1 170 1-210-08-2-3 8202866 6 200 8 205x6 14 2 170 1-210-08-3-3 8202873 6 200 8 205x6 18 3 170 1-210-10-1-3 8202880 6 250 10 265x7,5 9 1 344 1-210-10-2-3 8202903 6 250 10 26,5x7,5 12 2 344 1-210-10-3-3 8202910 6 250 10 265x7,5 16 3 344 1-210-12-1-3 8202927 6 300 12 31x9 8 1 480 1-210-12-2-3 8202934 6 300 12 31x9 11 2 480 1-210-12-3-3 8202041 6 300 12 31x9 14 3 480 1-210-04-1-0 8020071 10 100 4 10x3 17 1 15 1-210-04-2-0 8020088 10 100 4 10x3 22 2 15 1-210-04-3-0 8020095 10 100 4 10x3 28 3 15 1-210-06-1-0 8020101 10 150 6 16x47 13 1 52 1-210-06-2-0 8020118 10 150 6 16x47 18 2 52 1-210-06-3-0 8020125 10 150 6 16x47 22 3 52 1-210-08-1-0 8020132 10 200 8 205x6 10 1 127 1-210-08-2-0 8020149 10 200 8 205x6 14 2 127 1-210-08-3-0 8020156 10 200 8 20,5x6 18 3 127 1-210-10-1-0 8020163 10 250 10 265x7,5 9 1 243 1-210-10-2-0 8020170 10 250 10 26,5x7,5 12 2 243 1-210-10-3-0 8020187, 10-250 10-26,5x7,5 16 3 243 1-210-12-1-0 8020194 5 300 12 31x9 8 1 435 1-210-12-2-0 8020200 5 300 12 31x9 11 2 435 1-210-12-3-0 8020217 5 300 12 31x9 14 3 435 1-210-14-1-0 8020224 5 350 14 35x10 7 1 630 1-210-06-1-2 8000424 5 150 6 16x47 13 1 100 1-210-06-2-2 8003654 5 150 6 16x47 18 2 100 1-210-08-1-2 8000455 5 200 8 20,5x6 10 1 170 1-210-08-2-2 8000479 5 200 8 205x6 14 2 170 1-210-10-1-2 8000493 5 250 10 265x7,5 9 1 344 1-210-10-2-2 8003661 5 250 10 265x7,5 12 2 344 4-210-12-1-2 8028121 5 300 12 31x9 8 1 480'SANDVIK| me [ ns Use 1 For filing holes, large fillets and concave surfaces. Rou nd fi le Shape Tapered towards the point. 4" and 6" fully pointed, 8" and longer semi-pointed. Double cut. O 1-230 Type of cut: 1 = Bastard, 2 = Second, 3 = Smooth. Product EAN code Dimensions _ Teeth Type code 731151+ Le Yength > ~ section per of 63 mm inch =omm cm cut " erga 1-230-06-1-3. 8202958 6 150 6 6 13 4 74 Industry pack, with handle 1-230-06-2-3. 8202965 6 150 6 6 18 2 74 1-230-06-3-3 8202972 6 150 6 6 22 3 74 1-230-08-1-3 8202089 = 6 200 88 10 1112 anes 1-230-08-2-3 8202996 6 200 8 8 14 2 112 1-230-08-3-3 8203009 6 200 8 8 18 3 112 1-230-10-1-3 8203023 6 250 10 10 9 1 183 1-230-10-2-3. 8203030 6 250 10 10 12 2 183 1-230-10-3-3 8203047 6 250 10 10 16 3 183 1-230-12-1-3 8203054 6 300 12 12 8 1 297 1-230-12-2-3 8203061 6 300 12 12 11 2 297 1-230-12-3-3. 8203078 6 300 12 12 14 3 297 1-230-04-1-0 8020248 10 100 4 3,6 17 1 9 1-230-04-2-0 8020255 10 100 4 3,6 22 2 9 Industry pack, unhandled 1-230-04-3-0 8020262 10 100 4 3,6 28 3 9 1-230-06-1-0 8020279 10 150 6 6 13 1 29 1-230-06-2-0 8020286 10 150 6 6 18 2 29 1-230-06-3-0 8020293 10 150 6 6 22 3 29 1-230-08-1-0 8020309 10 200 8 8 10 1 72 1-230-08-2-0 8020316 10 200 8 8 14 2 72 1-230-08-3-0 = 8020323 10 200 8 8 18 3 72 1-230-10-1-0 8020330 10 250 10 10 9 1 144 1-230-10-2-0 8020347 10 250 10 10 12 2 144 1-230-10-3-0 8020354 10 250 10 10 16 3 144 1-230-12-1-0 8020361 5 300 12 12 8 1 247 1-230-12-2-0 8020378 5 300 12 12 11 2 247 1-230-12-3-0 8020385 5 300 12 12 14 3 247 1-230-14-1-0 8020392 5 350 14 15 7 1 440 eroo* 1-230-06-1-2 8000509 5 150 6 6 13 1 74 : 1-230-06-2-2 8000523 5 150 6 6 18 2 74 Single pack carded 1-230-08-1-2 8000547 5 200 8 8 10 1 112 1-230-08-2-2. 8000554 5 200 8 8 14 2 112 aan 1-230-10-1-2 8000578 5 250 10 10 9 1 183 1-230-10-2-2 8003678 5 250 10 10 12 2 183 Bn 103SANDVIK File set 473: Sets of three files with handle. Supplied in a plastic roll-up wallet with tie. Fi | es ets Contains one each of: hand, half round and round engineering files. All second cut. Type of cut: 2 = Second. 1 -473 Product ."" EAN code ~ Files Dimensions - Type ergo code 2.733514... 25% perset _ length of 6,0 ; mo eo mm inch cut 1-473-06-2-2 8201098 1 3 150 6 2 395 1-473-08-2-2 8201104 1 3 200 8 2 635 1-473-10-2-2 8201111 1 3 250 10 2 925 Key file set 476: A set of six 4" files smooth double cut, for fine filing and polishing jobs. Each set contains one handled file each of: hand, warding, square, three square, half round and round. Supplied in a snap-shut plastic wallet with hanging hole. Type of cut: 3 = Smooth. EAN code... _- Files. | Dimensions Type 73145 1s! EF per set >. length ~ oof oo SR Ry Rr ~~ mm inch ~ cut : 1-476-04-3-2 8010928 1 6 100 4 3 200 File set 477: Sets of five files with handle. Supplied in a plastic roll-up wallet with tie. 1 -477 /1 _ 478 /1 . 479 Contains one each of: hand, half round, round, three square engineering files and a half round rasp. All second cut. ergo File set 478: Sets of five 8" engineers files with handle. Supplied in a plastic roll-up wallet with tie. Contains one file each of: hand bastard, hand second, square bastard, half round bastard, round bastard. File set 479: Sets of five 8" files with handie for carpentry and repair jobs. Supplied in a plastic roll-up wallet with tie. Contains one each of: hand, half round and round engineering files, a flat sharpening file and a cabinet rasp. Available in bastard and second cut. Type of cut: 1 = Bastard, 2 = Second. Product EAN code Files Dimensions Type code | 731151+ 67 perset _length of 6,0 mm inch cut 1-477-08-2-2 8037994 1 5 200 8 2 960 1-477-10-2-2 8201074 1 5 250 10 2 1490 1-478-08-1-2 8141127 1 5 200 8 142 900 1-479-08-1-2 8176747 1 5 200 8 1 935 1-479-08-2-2 8180607 1 5 200 8 2 935 _ - ; 105