D-subminiature Metal Sheil Right-Angle Dip Solder PCB Series 1 - High Reliability CINCH * .283" footprint uses minimal board space. * Available with three contact tail lengths (.125", .158", and .185") and two contact diameters (.030" and .040"). Materials * Mounting bracket: Black nylon. Can be removed if necessary. 112 (2.84) Ordering Information Right-Angle PCB Piugs Zinc-Plated Shell with Yellow Chromate Finish -125 Tail Length _.158 Tail Length .185 Tail Length _.125 Tail Length = .158 Tail Length -185 Tail Length Positions .030 Contact .030 Contact .030 Contact -040 Contact 040 Contact .040 Contact Diameter Diameter Diameter Diameter Diameter Diameter 9 DEM-9PD DEM-SPL DENM-9PS DEM-9PA DEM-9PG DEM-9PW 15 DAM-15PD DAM-15PL DAM-15PS DAM-T5PA DAM-15PG DAM-15PW 25 DBM-25PD DBM-25PL DBM-25PS DBM-25PA ~ DBM-25PG DBM-25PW 37 DCM-37PL DCN-37PS DCM-37PA DCM-37PG DCM-37PW DCM-37PD Tin-Plated Shell with Grounding Indents -125 Tail Length -158 Tail Length 185 Tail Length -125 Tail Length -158 Tail Length -185 Tail Length Positions .030 Contact .030 Contact .030 Contact -040 Contact .040 Contact 040 Contact Diameter Diameter Diameter Diameter Diameter Diameter 9 DEM-9PDTI DEM-9PLT] DEM-9PSTI DEM-9PATI DEM-9PGTI ~ DEM-9PWTI 15 DAM-15PDTI DAM-15PLTI DAM-15PSTI DAM-15PATI DAM-15PGTI BDAM-15PWTI 25 DBM-25PDT! DBM-25PLTI DBM-25PSTI DBM-25PATI DBM-25PGTI DBBN-25PWTI 37 DCM-37PDTI DCM-37PLTI DCGM-37P8TI DCM-37PAT! BCM-37PGTI DCM-37PWTE hanes