U.S. CAGE Code 06324
IPT Series
Bayonet Lock
Connectors
www.glenair.com E-Mail: sales@glenair.com
B-22
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
© 2008 Glenair, Inc. Printed in U.S.A.
IPT 00 A...PHM_ _
Front Panel Mount Square Flange Receptacle
with PHM Backshell
and Sleeves to Accommodate Various Cable Sizes
APPLICATION NOTES
1. Front panel mount square ange receptacle with backshell and PHM cable clamp. Rubber sleeves included to allow use of different
diameter cables.
2. Connector Class “A” (non-environmental ) ––no grommet supplied. PHM connector accessory provides
environmental sealing to IP65.
3. Standard materials conguration consists of aluminum alloy with stainless steel coupling pins.
4. Standard contact material consists of copper alloy with gold plating over nickel.
5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information.
6. Standard insert is high insulation synthetic rubber.
IPT 00 A 18-11 S Z C PHM11 XX
MIL-C-26482
Series l Type
00 - Front Panel Mount
Square Flange Receptacle
Connector Class
A - Non-Environmental
Shell Size and
Insert Arrangements
Contact Gender
P - Pin
S - Socket
Mod Code Options
See Table II
PHM Thread Size
See Table I
Contact Type
C - Crimp
(Omit for Solder Cup)
Alternate Insert Rotation (W, X, Y, Z)
Omit for Normal
G
HM
D
B
U.S. CAGE Code 06324
IPT Series
Bayonet Lock
Connectors
www.glenair.com E-Mail: sales@glenair.com
B-23
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
© 2008 Glenair, Inc. Printed in U.S.A.
TABLE I: DIMENSIONS
Shell size P.N. PHM B
min. - max.
D
Max.
G
±0.4
H
±0.1
L
Max.
M
±0.12
8 11 2 - 7 15.0 20.6 15.10 47.0 3.04
10 11 2 - 9 21.0 23.8 18.25 49.0 3.04
12 11 2 - 11 24.0 26.2 20.60 58.0 3.04
14 11 2 - 11 24.0 28.6 23.00 58.0 3.04
16 11 2 - 11 24.0 31.0 24.60 58.0 3.04
18 11 / 18 2 - 11 / 9 - 16.5 42.0 33.3 27.00 75.0 3.04
20 18 9 - 16.5 42.0 36.5 29.35 75.0 3.04
22 18 9 - 16.5 42.0 39.7 31.75 75.0 3.04
24 18 / 22 / 24 9 - 16.5 / 15 - 20 / 19 - 24 42.0 42.9 39.40 75.0 3.73
IPT 00 A...PHM_ _
Front Panel Mount Square Flange Receptacle
with PHM Backshell
and Sleeves to Accommodate Various Cable Sizes
TABLE II: MODIFICATION CODES
Shell Finish
(Omit for Standard Cad/Olive Drab Finish)
Assembly with Accessories
(Omit for Standard Version)
F2 - Bright Nickel Plating (RoHs) Key Polarization (Omit for N version)
W, X, Y, Z = Alternates
F6 - Black Electrodeposited Paint (RoHs) N0 - Connector Less Backshell
F7 - Black Zn-Co Plating (RoHs) NXXX - Custom Designed Connector
F8 - Olive Drab Zn-Co Plating
STANDARD FINISHES (For QQ-A-591 Aluminum Shells)
Requirements IAW RoHS Not IAW RoHS
F2 Electrolytic Nickel F6 Black Non Conductive F7 Black Conductive G3 Cadmium with Olive
Drab Passivation
F8 Zinc Cobalt with
Olive Drab Passivation
Thermal Shock -40°C + 100°C -55°C + 125°C -55°C + 125°C -55°C + 125°C -40°C + 100°C
Salt Spray After
Thermal Shock 24 hour 500 hour 500 hour 500 hour 200 hour
Electical Conductivity Very Good NO Very Good Very Good Good
Abrasion Resistance Very Good Very Good Good Very Good Good
