TL-W3MB2-5-5M - Omron - Datasheet.Live

Sensing distance

Supply voltage

Output

100/200 mA

NPN or PNP

12 to 24 VDC

1.5mm

3 mm

5 mm

5 mm20 mm

Inductive Proximity Sensor TL-W/WM

Space Saving Flat Proximity Switch

Space-saving, low-profile rigid aluminum die-cast

housing (TL-W5E/F).

All models provided with an operation indicator.

Mounting

possible from either the front or

rear of the

housing.

Protected to endure water and oil splashes

(conforms to IEC IP67).

DC 2-wire models (TL-W5MD1/-W5MD2) provide

easy wiring.

Ordering Information

DC 2-wire

Sensing

head

Sensing distance

Output

NPN PNP

NO NC NO NC

Non-shielded

5 mm

TL-W5MD1 TL-W5MD2 --- ---

DC 3-wire

Sensing

head

Sensing distance

Output

NPN PNP

NO NC NO NC

Shielded

5 mm

TL-W5E1 TL-W5E2 TL-W5F1 TL-W5F2

Non-shielded

1.5 mm

TL-W1R5MC1 --- TL-W1R5MB1 ---

3 mm

TL-W3MC1 TL-W3MC2 TL-W3MB1 TL-W3MB2

5 mm

TL-W5MC1 TL-W5MC2 TL-W5MB1 ---

20 mm

TL-W20ME1 TL-W20ME2 --- ---

TL-W/WM TL-W/WM

Application Examples

Position

of W

orkpiece

Specifications

Ratings/Characteristics

DC 2-wire

Item TL-W5MD

Sensing

distance

5 mm

±10%

Supply voltage

(operating voltage range)

12 to 24 VDC (10 to 30 VDC)

Current consumption

(leakage current)

0.8 mA max.

Sensing object

Magnetic metals (refer to

“Engineering Data”

for non-magnetic metals)

Setting distance

(standard sensing object)

0 to 4 mm (iron, 18 x 18 x 1 mm)

Differential travel

10% max. of sensing distance

Response frequency

(see note)

0.5 kHz

Operating mode (for detecting

sensing objects)

D1 models:

Load ON

D2 models: Load OFF

Control output

(switching capacity)

3 to 100 mA DC

Circuit protection

Load short-circuit protection

Indicator

D1 models:

Operation indicator (red LED), operation set indicator (green LED)

D2 models: Operation indicator (red LED)

Ambient temperature

Operating: –25

C to 70

C (with no icing)

Ambient humidity

Operating: 35% to 95%

emperature influence

10% max. of sensing distance at 23

C in temperature range of –25

C to 70

°C

oltage influence

2.5% max. of sensing distance in rated voltage range

±15%

Residual voltage

3.3 V max. (with 100 mA load current and 2-m cable)

Insulation resistance

50 M

Ω

min. (at 500 VDC) between current carry parts and case

Dielectric strength

1,000 V

AC for 1 min between current carry parts and case

ibration resistance

Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hrs each in X, Y

, and Z directions

Shock resistance

Destruction: 500 m/s

(approx. 50G) for 3 times each in X, Y

, and Z directions

Enclosure ratings

IEC IP67 (JEM IP67G (water-tight, oil-tight)

eight (with 2-m cable)

Approx. 45 g

Material Case Heat-resistive ABS resin

Sensing surface

Note:

The response frequency in the table is a mean value obtained under the following conditions.

Location of each standard sensing object: At a distance half as long as the sensing distance of the sensor

Distance between any two adjacent standard sensing objects: T

wice as wide as the width of the standard sensing object.

TL-W/WM TL-W/WM

DC 3-wire

Item TL-W1R5M TL-W3M TL-W5M TL-W5 TL-W20M

Sensing

distance

1.5 mm

±10%

3 mm

±10%

5 mm

±10%

20 mm

±10%

Supply voltage

(operating voltage

range)

12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.

12 to 24 VDC (10 to

30 VDC), ripple

(p-p): 20% max.

12 to 24 VDC (10 to

30 VDC)

Current consumption

(leakage current)

15 mA max. at 24 VDC (no-load) 10 mA max.

15 mA max. at

24 VDC (no-load) 8 mA at 12 VDC,

15 mA at 24 VDC

Sensing object

Magnetic metals (Non-magnetic metals can be detected if they are located close to the sensor

. Refer to

“Engineering Data”

for details)

Setting distance

(standard sensing

object)

0 to 1.2 mm (iron,

8 x 8 x 1 mm)

0 to 2.4 mm (iron,

12 x 12 x 1 mm)

0 to 4 mm (iron, 18 x 18 x 1 mm)

0 to 16 mm (iron, 50

x 50 x 1 mm)

Differential travel

10% max. of sensing distance

1% to 15% of

sensing distance

Response frequency

(see note)

1 kHz

600 Hz min. 500 Hz min. 300 Hz min.

40 Hz

Operating mode (for

detecting sensing

objects)

Load ON

E1 models: Output signal low

, load ON

E2 models:

Output signal high, load OFF

F1 models: Output signal high, load ON

F2 models:

Output signal low, load OFF

Control output

(switching capacity)

NPN or PNP open collector

, 100 mA

max.

NPN or PNP open

collector

, 50 mA

max. at 12 VDC,

100 mA max. at 24

VDC

200 mA max.

100 mA max. at

12 VDC,

200 mA max. at

24 VDC

Circuit protection

Reverse connection protection

---

Ambient temperature

Operating: –25

C to 70

C (with no icing)

Ambient humidity

Operating: 35% to 95%

emperature influence

10% max. of sensing distance at 23

C in temperature range of –25

C to 70

°C

oltage influence

2.5% max. of sensing distance in

rated voltage range

±10% ±

2.5% max. of

sensing distance in

rated voltage range

±20%

2.5% max. of sensing distance in rated

voltage range

±10%

Residual voltage

1.0 V max. (with 100 mA load current

and 2-m cable)

1.0 V max. (with

50 mA load current

and 2-m cable)

2.0 V max. (with

200 mA load current

and 2-m cable)

1.0 V max. (with

200 mA load current

and 2-m cable)

Insulation resistance

50 M

Ω

min. (at 500 VDC) between current carry parts and case

Dielectric strength

1,000 V

AC, 50/60 Hz for 1 min between current carry parts and case

ibration resistance

Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hrs each in X, Y

, and Z directions

Shock resistance

Destruction: 500 m/s

(approx. 50G) for 3 times each in X, Y

, and Z directions

Destruction:

500 m/s

(approx.

50G) for 10 times

each in X, Y

, and Z

directions

Enclosure ratings

IEC IP67 (JEM IP67G (water-tight, oil-tight)

eight (with 2-m cable)

Approx. 30 g Approx. 45 g Approx. 70 g

Approx. 180 g

Material Case ABS resin ADC (Al die-cast) Heat-resistive ABS

Sensing

surface ABS resin

TL-W/WM TL-W/WM

Engineering Data

Operating Range (Typical)

TL-W1R5M TL-W3M TL-W5M

TL-W20M

Sensing head

t = 1 mm

Sensing

object

X (mm)

Y (mm)

Sensing object:

Iron, 18 x 18 x

1 mm

Sensing

distance x (mm)

Sensing

object

Sensing head

Y (mm)

Sensing object:

Iron, 12 x 12 x

1 mm

Sensing head Y (mm)

Sensing

object

Sensing object: Iron,

18 x 18 x 1 mm

Sensing

distance X (mm)

Sensing object: Iron,

15 x 15 x 1 mm

Sensing distance X (mm)

Sensing

object

Sensing head Y (mm)

TL-W5

Sensing object:

Iron, 8 x 8 x 1 mm

Sensing

object

Sensing distance X (mm)

Sensing head Y (mm)

TL-W/WM TL-W/WM

Sensing Distance vs. Size and

Material of Sensing Object

(Typical)

TL-W1R5M TL-W3M TL-W5M

Iron

Stainless steel (SUS304)

Brass

Aluminum

Object

diameter d (mm)

Sensing distance (mm)

Copper

Sensing distance (mm)

Object:

Iron

t = 1 mm

Operate

Release

Sensing

object

Object

diameter d (mm)

Object diameter d (mm)

Sensing distance (mm)

Iron

Stainless steel

(SUS304)

Brass

Copper

Aluminum

TL-W20MTL-W5

Iron

Stainless steel (SUS304)

Copper

Aluminum

Object

diameter d (mm)

Sensing distance (mm)

Object diameter d (mm)

Sensing distance (mm)

Iron

Stainless steel

(SUS 304)

Brass

Aluminum

Sensing

object

TL-W/WM TL-W/WM

Operation

Output Circuits

DC 2-wire

TL-W5MDj

Note: The

load can be connected as shown in

the above diagram.

Main

circuit

Brown

Blue

0 V

Brown

Blue

Load

Brown

Blue

Load

DC 3-wire

TL-W1R5MC1

TL-W3MCj

TL-W5MCj

TL-W5Ej

TL-W20MEjTL-W5Fj

Main

circuit

Load

0 V

Brown

Black

(see

note)

Output

Blue

Main

circuit

Load

0 V

Brown

Black

(see

note

Output

(see

note 2)

Blue

Main

circuit

Load

0 V

Brown

Black

(see

note

Output

(see

note 2)

Blue

Note: Maximum

load current: 100 mA

Note: 1.

Maximum load current: 200 mA

Current flows in this direction if the circuit incorporates the transistor

TL-W1R5MB1

TL-W3MBj

TL-W5MB1

Load

Main

circuit

Brown + V

0 V

Black

Blue

100 Ω

100 Ω100 Ω

4.7 kΩ

2.2

Ω

100 Ω

4.7 kΩ

2.2

Ω

TL-W/WM TL-W/WM

Timing Chart

DC 2-wire

Model

NC Model

Non-sensing zone

Unstable

sensing

zone

Setting position

Stable

sensing zone Proximity

Sensor

Sensing

object

Rated

sensing

distance Lit Green

indicator

Not lit

Lit

Not lit

Red

indicator

Control

output

Non-sensing zone

Sensing

object

Rated

sensing

distance

Sensing zone Proximity

Sensor

Lit

Not lit

Red

indicator

OFF Control

output

OFF

DC 3-wire

TL-W1R5Mj1

TL-W3Mj

TL-W5Mj

TL-W5j

TL-W20MEj

TL-W5Fj

Sensing

object Yes

Lit

Not lit

OFF

Operation

indicator

Output transistor

(load)

Load (between brown and

black)

Output voltage (between

blue and black)

Sensing

object Yes

Lit

Not lit

Operation

indicator

Operate

Release

Load (between blue and

black) Operate

Release

Output voltage (between

blue and black)

Sensing

object Yes

Lit

Not lit

Operation

indicator

TL-W/WM TL-W/WM

Dimensions

Note: All

units are in millimeters unless otherwise indicated.

TL-W1R5Mj1

TL-W3Mjj

Mounting Bracket (Attachment)

6.0

Operation indicator

Mounting hole for

M3 pan-head screw

(See note)

Sensing surface

17±0.2

5±0.2

6 dia.

3.2 dia. Operation indicator

90°

30.5

8.5

4.5

3.5

6.5 7.5 8

12.5

Operation indicator

Sensing surface

Two, 3.5 x 5

mounting holes

12±0.1

TL-W5Mjj

TL-W5MDjTL-W5Mjj:

Round vinyl-insulated cable (4 dia., 0.12 dia. x 18, 3 cores)

Standard length: 2 m (oil-tight)

TL-W5MDj:

Round vinyl-insulated cable (4 dia., 0.12 dia. x 27, 2 cores)

Standard length: 2 m (oil-tight)

(see

note)

3.2 dia.

dia.

(See note)

Operation indicator

Sensing surface Mounting hole for

M3 pan-head screw

(see

note)

Note: Round vinyl-insulated cable

(2.9

dia., 0.12 dia. x 12, 3 cores)

Standard

length: 2 m (oil-tight)

Note: Round vinyl-insulated

cable

(2.9 dia.,

0.12 dia.

12, 3 cores)

Standard length: 2 m

(oil-tight)

Note: Mounting dimensions:

17±0.2

Note: Mounting dimensions:

17±0.2

TL-W/WM TL-W/WM

TL-W5Ej

TL-W5Fj

TL-W20MEj

Sending surface Operation indicator

Approx. 2

4.2 dia.

7.2 dia.

15±0.2

Two, 4.5 dia. holes

Mounting

Holes

Round vinyl-insulated cable

(4 dia., 0.12 dia. x 18,

3 cores)

Standard cable length: 2 m

40 18

23 18 1

53 1.5

30±0.1

27±0.1

Sensing surface

Operation indicator Two, 5.5 dia. mounting

holes

Round vinyl-insulated cable (6 dia.,

0.12 dia. x 45, 3 cores)

Standard length: 2 m

24.9 0

–0.4

7.2 dia.

10 8

Round vinyl-insulated cable

(4 dia., 0.12 dia. x18

3 cores)

TL-W/WM TL-W/WM

Precautions

Effects of Surrounding Metals

Provide

a minimum distance

as shown in the table below between

the

TL-W and the surrounding metals to prevent the TL-W from be

ing

induced by the

metals and malfunctioning or being af

fected by

the heat radiated by the metals.

Model ȏm n

TL-W1R5Mj1

2 mm 0 mm 8 mm

TL-W3M

3 mm 0 mm

12 mm

TL-W5MD

5 mm 0 mm

20 mm

TL-W5MC/MB

5 mm 0 mm

20 mm

TL-W20ME

25 mm 16 mm 100 mm

TL-W5E/F

0 mm 0 mm

20 mm

Metal on a Single Side

(not exceeding the height of

the sensor head)

Metals on Both Sides and

in front of the Sensor

ÉÉÉÉÉÉÉÉ

ÉÉÉÉÉ

Proximity switch

Sensing

surface

ȏȏ

ÉÉÉÉÉÉÉ

Proximity switch

Sensing surface

Mutual Interference

Be sure to space the two sensors at a distance greater than that

shown

in the table to prevent mutual interference.

Model A B

TL-W1R5Mj1

75 (50) mm

25 (8) mm

TL-W3M

90 (60) mm 30 (10) mm

TL-W5MD

120 (80) mm 60 (30) mm

TL-W5MC/MB

120 (80) mm 60 (30) mm

TL-W20ME

200 (100) mm 200 (100) mm

TL-W5E/F

50 mm 35 mm

Note: The

above values in parentheses are

applicable when us

ing

two sensors with dif

ferent frequencies.

Mounting

Use M3 flat-head screws to mount the TL-W1R5Mj1 and

TL-W3Mj1.

The

resin cover should be tightened to 10 kgf

(0.98 N

m) maxi

mum.

TL-W/WM TL-W/WM

OMRON Corporation

Systems

Components Division H.Q.

28th Fl., Crystal T

ower Bldg.

1-2-27, Shiromi, Chuo-ku,

Osaka 540 Japan

Phone: 06-949-6012 Fax: 06-949-6021

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

convert millimeters into inches, multiply by 0.03937. T

o convert grams into ounces, multiply by 0.03527.

Cat. No. E221-E1-2 In the interest of product improvement, specifications are subject to change without notice.

Printed

in Japan

0196-1.5M (1291)