SPECIALTY
T-88
General’s high quality, easy-to-read Dial Calipers
give precise readings – Inside, Outside, Depth and
Step measurements. The 6" Plastic Dial Caliper is
made of fiberglass reinforced plastic and gives
precision measurements at an economical price.
The 6" Dial Caliper is a stainless steel construction for
greater accuracy and durability.
Dial Calipers
SPECIALTY TOOLS
Toll Free 800-697-8665 •Fax 212-431-6499 • www.generaltools.com
ALWAYS WEAR
OSHA APPROVED
SAFETY GOGGLES
• Fiberglass reinforced plastic gives
precision measurements at an
economical price
• Measuring capacity 0 to 6"
• Contrasting color coded dial is graduated in
.01" and 64ths with inch and mm on bar
scale
• No-glare easy-to-read dial with adjustable
bezel
• Inside, outside, depth and step
measurements
• Freewheeling friction roller for
repetitive and accurate readings
• Fractional conversion table
on back
UPC NO.
44145 4 142
6" PLASTIC, DIRECT READING DIAL CALIPER
142
6" DIAL CALIPER
• Stainless steel construction for accuracy and
durability
• Large, clear dial accurately
readsto.001"
• Satin chrome scale with clearly etched
tenths of inch graduations
• Covered rack ensures smooth operation by
preventing dirt and chips from entering rack
and gear mechanism
• Inside, outside, depth and step
measurement
• Lock for repetitive measurement
• Free wheeling thumb roller
• Depth stop rod
• Adjustable bezel for zero setting
UPC NO.
10700 8 107
107
DIAL CALIPER AND MARKING SET
• This set contains three of the most useful
measuring and marking tools for mechanics
and machinists
• Set includes: 6" Dial Caliper; 6" x 3/4"
Stainless Steel Rule with satin finish and
reversible Tip Carbide Scriber with magnetic
pick-up
• Rule has etched and filled 4 graduations
(1/8", 1/16", 1/32", 1/64")
• Scriber has aluminum body with knurled
handle with an overall length of 4-3/4"
• Caliper has inside, outside, depth and step
measurements
• Caliper has lock for repetitive measurement
• Caliper has free wheeling thumb roller
• Packaged in a sturdy, fitted, plastic case
designed specifically for this set
UPC NO.
10800 5 108
108
• Capacity 0 to 6"
• Readings in .001"
• Single revolution of dial is .100"
• Resolution .001"
• 6" scale is graduated in tenths/mm
• Non-glare dial with adjustable bezel
• Packed in reusable plastic hang-up case
• Inside, outside, depth and step
measurements
• Freewheeling friction roller for
repetitive and accurate readings
UPC NO.
44150 8 145
6" PLASTIC DIAL CALIPER, THOUSANDTHS READING, SINGLE REVOLUTION
145
• Capacity 0 to 150mm by 0.1mm
• Accurately graduated dial has direct read-
ings in metric 0.1mm
• Complete with instructions and reusable
plastic hang-up case
• Inside, outside, depth and step measure-
ments
• Freewheeling friction roller for
repetitive and accurate readings
UPC NO.
44148 5 144MM
144MM
PLASTIC, METRIC DIAL CALIPER