Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : FKS Type : V High temperature Lead-Free reflow Features Endurance : 105 C 2000 h size smaller than series FK Vibration-proof product is available upon request. (08 mm and larger) RoHS compliant 1 Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 -55 C to +105 C 6.3 V.DC to 50 V.DC 10 F to 1800 F 20 % (120 Hz/+20 C) I < 0.01 CV or 3 (A) After 2 minutes (Whichever is greater) Please see the attached characteristics list V.DC 6.3 10 16 25 35 50 Z(-25 C)/Z(+20 C) 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z(-40 C)/Z(+20 C) 3 3 3 3 3 3 Z(-55 C)/Z(+20 C) 4 4 4 3 3 3 After applying rated working voltage for 2000 hours at +105 C2 C and then being stabilized at +20 C, capacitors shall meet the following limits. Capacitance change Within 30 % of the initial value (6.3 V.DC of B, C size : Within 40 %) < 200 % of the initial limit tan d DC leakege current Within the initial limit After storage for 1000 hours at +105 C2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 C, capacitors shall meet the following limits. Capacitance change Within 10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) 120 1k 10 k 100 k to Correction factor 0.65 0.85 0.95 1.00 Capacitance (F) 270 j KS W Pressure Relief (010 and larger) ( ) Reference size (Unit : mm) Rated voltage code Lot number R. Voltage 6.3 (V.DC) Code j + L Series identification A0.2 (P) Negative polarity marking (-) - H 0D0.5 0.3 max. (I) Example : 6.3 V.DC 270 F Marking color : BLACK K (I) Dimensions B0.2 Marking 10 16 25 35 50 A C E V H Size code 0D B 4.0 C 5.0 D 6.3 D8 6.3 F 8.0 G 10.0 L A, B H. 5.80.3 4.3 5.5 max 5.80.3 5.3 6.5 max 5.80.3 6.6 7.8 max 7.70.3 6.6 7.8 max 10.20.3 8.3 10.0 max 10.20.3 10.3 12.0 max I W P K 1.8 2.2 2.6 2.6 3.4 3.5 0.650.1 0.650.1 0.650.1 0.650.1 0.900.2 0.900.2 1.0 1.5 1.8 1.8 3.1 4.6 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.700.20 0.700.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 May. 2017 NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW