Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors (SMD Type)
270
KS
j
Capacitance (µF)
Series identification
Lot number
Negative polarity
marking (–)
Rated voltage code
A±0.2
W
( ) Reference size
0D±0.5
H
B±0.2
(I)
K
(P) (I)
L+
0.3 max.
Pressure Relief (010 and larger)
Endurance : 105 °C 2000 h
1 size smaller than series FK
Vibration-proof product is available upon request. (08 mm and larger)
RoHS compliant
Features
Frequency correction factor for ripple current
DimensionsMarking
Speci cations
Surface Mount Type
Series : FKS Type : V
High temperature Lead-Free re ow
Example : 6.3 V.DC 270 µF
Marking color : BLACK
Category temperature range
–55 °C to +105 °C
Rated voltage range 6.3 V.DC to 50 V.DC
Capacitance range 10 µF to 1800 µF
Capacitance tolerance ±20 % (120 Hz/+20 °C)
Leakage cur rent I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)
Dissipation factor (tan d)
Please see the attached characteristics list
Characteristics
at low temperature
V.DC 6.3 10 16 25 35 50
(Impedance ratio at 120 Hz)
Z(–25 °C)/Z(+20 °C) 222222
Z(–40 °C)/Z(+20 °C) 333333
Z(–55 °C)/Z(+20 °C) 444333
Endurance
After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized
at +20 °C, capacitors shall meet the following limits.
Capacitance change
Within ±30 % of the initial value (6.3 V.DC of B, C size : Within ±40 %)
tan d< 200 % of the initial limit
DC leakege current
Within the initial limit
Shelf life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
Resistance to
soldering heat
After refl ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change Within ±10 % of the initial value
tan dWithin the initial limit
DC leakage current
Within the initial limit
AEC-Q200 AEC-Q200 compliant
Frequency (Hz) 120 1 k 10 k 100 k to
Correction factor 0.65 0.85 0.95 1.00
(Unit : mm)
R. Voltage
(V.DC) 6.3 10 16 25 35 50
Code j ACEVH
Size
code 0DL A, B H. I W P K
B 4.0 5.8±0.3 4.3 5.5 max 1.8 0.65±0.1 1.0 0.35
-0.20
C 5.0 5.8±0.3 5.3 6.5 max 2.2 0.65±0.1 1.5 0.35
-0.20
D 6.3 5.8±0.3 6.6 7.8 max 2.6 0.65±0.1 1.8 0.35
-0.20
D8 6.3 7.7±0.3 6.6 7.8 max 2.6 0.65±0.1 1.8 0.35
-0.20
F 8.0 10.2±0.3 8.3 10.0 max 3.4 0.90±0.2 3.1 0.70±0.20
G 10.0 10.2±0.3 10.3 12.0 max 3.5 0.90±0.2 4.6 0.70±0.20
+0.15
+0.15
+0.15
+0.15
May. 201701
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW