Keil MCB1343 Evaluation Board Overview Page 1 of 1 MCB1343 Evaluation Board The Keil MCB1343 Evaluation Board introduces the new LPC134x family of ARM Cortex-M3 processor-based devices, allowing you to create and test working programs for this advanced architecture. The MCB1343 has a wide range of interfaces making it a great starting point for your next Cortex-M3 project. MCB1343 Features 72MHz LPC1343FBD48 ARM CortexTM-M3 processor-based MCU in 48-pin LQFP On-Chip Memory: 32KB Flash & 8KB RAM External Memory: 8KB EEPROM accessible via I2C bus Solar Power - can optionally provide power to the board Temperature Sensor - digital sensor for monitoring board temperature USB 2.0 Full Speed interface and USB Micro AB connector SPI Port via 20-pin Molex connector 42 GPIO pins 10 pin Cortex debug (0.05 inch connector) Ordering Information Part numbers are: MCB1343: MCB1343 Evaluation Board Evaluation Software The MCB1343 Evaluation Board includes the MDK-ARM Evaluation Tools. These tools help you get started writing programs and testing the microcontroller and its capabilities. Sample applications that run on the MCB1000 and a Quickstart guide are included. For programming and application debugging a ULINK family USB-JTAG Adapter is required. The MCB1343 will be available during the second-half of 2010. Contact Us | Site Feedback | Terms of Use | Privacy Policy Copyright (c) 2013 ARM Ltd and ARM Germany GmbH. All rights reserved. http://www.keil.com/mcb1000/mcb1343.asp 4/20/2015