www.amphenolpcd.com Milaero@amphenolpcd.com 1-978-624-3400 72 Cherry Hill Road Beverly, MA 01915
Amphenol Pcd MIL-PRF-12883 Relay Sockets
Amphenol Pcd offers the industry’s broadest line of pluggable relay sockets for
commercial and miltary airborne, ground and shipboard equipment. Sockets are to
MIL-PRF-12883 specifications, plus specialized requirements, and are supplied in
a broad range of miltary standard and special configurations and styles for 2 through
25 amp operations.
Amphenol Pcd relay Sockets feature state of the art ultrasonically bonded interfaces
between the dielectric components, which eliminate air paths and provide protection
against moisture and degradation.
Amphenol Pcd Relay Sockets
MIL-PRF-12883
Low Profile
Relay Sockets
Extended Height
Relay Sockets
Microminiature
Relay Sockets
Board Mount
Relay Sockets
Track Mount
Relay Sockets
Solder Terminaiton
Relay Sockets
Key Features and Benefits
Socket Selection
Reference tanles of QPL listings on Page 5, relays utilized with specific sockets on pages 6-7 and socket recomendations for
military and commercial relays on pages 8-9 will assist in and simplify socket selection.
Socket Variations
Low Profile
Low Profile Relay Sockets are provided in all military configurations, are configured to a minimum size and weight, and
accept the MIL-C-39029/92 contact family.
Extended Height
Extended Height Sockets are configured to accept the longer MIL-C-39029/5 contact - which is standard on many cylindrical
connectors and other avionic interconnect systems - and allow contact standardization.
Mounting Hardware
Sockets are available with either fixed or loose mounting studs. Studs and hardware supplied with standard Ampehnol Pcd
QPL-listed sockets are cold rolled steel. Stainless steel is available as an alternate. To specify stainless steel, an “S” is
added to both the QPL number and the Amphenol Pcd catalog number.
Mounting Style
Relay sockets can be top or bottom mounted. See appropriate catalog pages for mounting instructions.
Polarization
Relay-to-socket positive polarization is provided by specific contact configurations and/or polarizing pins, in accordance with
MIL-Spec requirements.
Contact
Closed entry socket contacts qualified to MIL-C-39029 are utilized and supplied with Amphenol Pcd Relay Sockets. Note:
Relay Socket catalog numbers include the appropriate number of contacts as defined in the applicable military specification.
Amphenol Pcd
6
www.amphenolpcd.com Milaero@amphenolpcd.com 1-978-624-3400 72 Cherry Hill Drive Beverly, MA 01915
Military Qualified, QPL Listed
Relay Socket Part Numbers
Stainless Steel Hardware
To specify Relay Sockets with Stainless Steel hardware, the suffix “S” is added to both the military
and Aphenol Pcd part Numbers. For example, M12883/40-01 becomes M12883/40-01S, and the
Amphenol Pcd equivalent RSL116079 becomes RSL116079-S.
Amphenol Pcd
M12883/40-01
M12883/40-02
M12883/40-03
M12883/40-04
M12883/40-05
M12883/40-06
M12883/40-07
M12883/40-08
M12883/40-09
M12883/40-10
M12883/40-11
M12883/40-12
M12883/40-13
M12883/40-14
M12883/40-15
M12883/40-16
M12883/40-17
M12883/40-18
M12883/40-19
M12883/40-20
M12883/40-21
M12883/40-22
M12883/40-23
M12883/40-24
M12883/41-01
M12883/41-02
M12883/41-03
M12883/41-04
M12883/41-05
M12883/41-06
M12883/41-07
M12883/41-08
M12883/41-09
M12883/41-10
M12883/41-11
M12883/41-12
M12883/41-13
M12883/41-14
M12883/41-15
M12883/41-16
M12883/41-17
M12883/41-18
M12883/41-19
RSL116079
RSL116081
RSL116083
RSL116085
RSL116087
RSL116089
RSL116051
RSL116053
RSL116055
RSL116057
RSL116059
RSL116061
RSE116661
RSE116663
RSE116665
RSE116667
RSE116669
RSE116671
RSE116673
RSE116675
RSE116677
RSE116679
RSE116681
RSE116683
RSL116091
RSL116093
RSL116095
RSL116097
RSL116099
RSL116063
RSL116065
RSL116067
RSL116069
RSL116071
RSE116685
RSE116687
RSE116689
RSE116691
RSE116693
RSE116695
RSE116697
RSE116699
RSE116701
M12883/41-20
M12883/44-01
M12883/44-02
M12883/44-03
M12883/44-04
M12883/45-01
M12883/45-02
M12883/45-03
M12883/45-04
M12883/45-05
M12883/45-06
M12883/46-01
M12883/46-02
M12883/46-03
M12883/46-04
M12883/47-01
M12883/47-02
M12883/47-04
M12883/47-05
M12883/47-07
M12883/47-08
M12883/47-10
M12883/47-11
M12883/48-01
M12883/48-02
M12883/48-03
M12883/48-04
M12883/48-05
M12883/48-06
M12883/48-07
M12883/48-08
M12883/52-001
M12883/52-002
M12883/52-003
M12883/53-001
M12883/54-01
M12883/54-02
M12883/54-03
M12883/54-04
M12883/55-01
M12883/55-02
M12883/55-03
RSE116703
RSE120151
RSE120153
RSE120155
RSE120157
RSE120159
RSE120161
RSE120163
RSE120165
RSE120167
RSE120169
RSE116747
RSE116749
RSE116751
RSE116753
RSE116755
RSE116757
RSE116761
RSE116763
RSL116101
RSL116103
RSL116073
RSL116075
RSE112061
RSE112063
RSL112105
RSL112101
RSE112065
RSE112067
RSL112107
RSL112103
RSE116175
RSE116185
RSE116195
RST145005
RSE116627
RSE116631
RSE116629
RSE116635
RSE112035
RSE112036
RSE112044
10
10
10
10
10
10
10
10
10
10
10
10
11
11
11
11
11
11
11
11
11
11
11
11
12
12
12
12
12
12
12
12
12
12
13
13
13
13
13
13
13
13
13
13
14
14
14
14
15
15
15
16
16
16
17
17
17
17
18
18
18
18
18
18
18
18
19
19
19
19
19
19
19
19
20
20
20
20
21
21
21
21
22
22
22
7
www.amphenolpcd.com Milaero@amphenolpcd.com 1-978-624-3400 72 Cherry Hill Drive Beverly, MA 01915
Relay Socket Cross Reference Chart
Relay to Relay Socket
Military Relay Part Number Military Socket Part Number APCD Socket Part Number Relay Type Page
M83536/15-002
M83536/17-002, 17-005
M83536/18-002, -005, -008, -012
M83536/21-006, -014, -022, -030
M83536/25-002
M6106/27-002
MS27742-2
MS27743-06, -12, -18, -24
MS27743-09, -15, -21, -27
Leach Corp. KA-D4E & J
M12883/40-01
M12883/46-01
M12883/47-01
M12883/47-02
M12883/54-04
M12883/48-01
M12883/48-05
M12883/41-03
M12883/40-04
RSL116079
RSL116081
RSL116089
RSE116747
RSE116755
RSE116757
RSE116635
RSE112061
RSE112065
RSL116095
RSL116085
4 Pole / 10 Amp
4 Pole / 10 Amp
4 Pole / 10 Amp
3 Pole / 10 Amp
6 Pole / 10 Amp
6 Pole / 10 Amp
3 Pole / 25 Amp
3 Pole / 25 Amp
3 Pole / 25 Amp
2 Pole / 10 Amp
4 Pole / 10 Amp
10-11
10-11
10-11
17
18
18
21
19
19
12-13
10-11
M83536/16-006, -014, -031, -034
M83726/1, /2, /3, /4, /28, /29, /30, /31*
MS27709-2
M83536/19-002, -005, -008, -012
M83536/20-002
M83536/26-002
M83536/22-006, -014, -022, -031
Leach Corp. JA-D4E & J
M12883/40-05
M12883/40-07
M12883/40-11
M12883/40-13
M12883/40-17
M12883/40-19
M12883/40-23
M12883/40-02
M12883/40-08
M12883/40-14
M12883/40-20
M12883/40-06
M12883/40-12
M12883/40-18
M12883/40-24
M12883/47-04
M12883/47-07
M12883/47-10
M12883/47-05
M12883/47-08
M12883/47-11
M12883/48-02
M12883/48-03
M12883/48-04
M12883/48-06
M12883/48-07
M12883/48-08
M12883/41-08
M12883/41-13
M12883/41-18
M12883/40-10
M12883/40-16
M12883/40-22
RSL116087
RSL116051
RSL116059
RSE116661
RSE116669
RSE116673
RSE116681
RSL116053
RSE116663
RSE116675
RSL116061
RSL116671
RSE116683
RSE116761
RSL116101
RSL116073
RSE116763
RSL116103
RSL116075
RSE112063
RSL112105
RSL112101
RSE112067
RSL112107
RSL112103
RSL116067
RSE116689
RSE116699
RSL116057
RSE116667
RSE116679
*Applies to all plug-in dash numbered relays of these documents
Amphenol Pcd
8
www.amphenolpcd.com Milaero@amphenolpcd.com 1-978-624-3400 72 Cherry Hill Drive Beverly, MA 01915
Relay Socket Cross Reference Chart
Relay to Relay Socket
Military Relay Part Number Military Socket Part Number APCD Socket Part Number Relay Type Page
M6106/12-002
M6106/13-002,-008,-011,-013,-015
M6106/13-004
M6106/19-004,-007,-012,-017,-022
M6106/20-002
M6106/38-002
M6106/40-002
M83536/1-006,-015,-024,-033
M83536/2-028, M83726/24, /25
M83536/5-006,-014, -022, -030
M83536/6-006, -015, -022, -032
M83536/6-025
M83536/7-022
M83536/9, -006, -015, -024, -035
M83536/10-006,-015,-024,
-034,-038
M83536/11-002, 004, 007
M83536/13-002, 005, 008, 012
M83536/14-002
M12883/54-03
M12883/54-01
M12883/54-02
M12883/55-01, M12883/55-02
M12883/55-03
M12883/45-04
M12883/46-02
M12883/45-01
M12883/52-001
M12883/44-01
M12883/52-002
M12883/44-02
M12883/41-01
M12883/41-02
M12883/41-05
M12883/41-04
M12883/41-06
M12883/41-09
M12883/41-11
M12883/41-14
M12883/41-16
M12883/41-19
M12883/41-07
M12883/41-12
M12883/41-17
M12883/41-10
M12883/41-15
M12883/41-20
RSE116629
RSE116627
RSE116631
RSE112035, RSE112036
RSE112044
RSE120165
RSE116749
RSE120159
RSE116175
RSE120151
RSE116185
RSE120153
RSL116091
RSL116093
RSL116099
RSL116097
RSL116063
RSL116069
RSE116685
RSE116691
RSE116695
RSE116701
RSL116065
RSE116687
RSE116697
RSL116071
RSE116693
RSE116703
3 Pole / 25 Amp
3 Pole / 25 Amp
3 Pole / 25 Amp
1 Pole / 25 Amp
1 Pole / 25 Amp
2 Pole / 5 Amp
3 Pole / 5 Amp
2 Pole / 5 Amp
Track Mount
4 Pole / 5 Amp
Track Mount
4 Pole / 5 Amp
2 Pole / 10 Amp
2 Pole / 10 Amp
2 Pole / 10 Amp
21
21
21
22
22
15-16
17
15-16
20
14
20
14
12-13
12-13
12-13
2 Pole / 5 Amp
4 Pole / 5 Amp
M83536/2-006,-015,-024,-035
*Applies to all plug-in dash numbered relays of these documents
Amphenol Pcd
9
Amphenol Pcd
www.amphenolpcd.com Milaero@amphenolpcd.com 1-978-624-3400 72 Cherry Hill Drive Beverly, MA 01915
MIL-PRF-12883/40
Extended Height RSL 4 Pole/10 Amp
Recommended Mounting
Panel Cutout
Socket Configurations Extended Height Relay Sockets
MIL P/N
M12883
APCD
P/N
QTY Size¹ Config. Mating Relay
P/N
Contact
Mates with M83536, M6106,
M27709, M83726 Relays
Materials
Module Body:
Polyetherimide per ASTM-D5205
Grommet:
Silicone Rubber per A-A-59588
Hardware:
Stainless Steel or Steel w/
Cadmium Chromate Finish
Contact Retainers:
Stainless Steel
Socket Contacts:
Stainless Steel, Hard Gold Plated in
Accordance with SAE-AMS-2422
Operating Range
Temperature:
-65ºC to 125ºC
Insulation Resistance:
1000 Megaohms Min.
Dielectric Withstanding Voltage:
1500 VRMS at Sea Level
500 VRMS at 80,000 ft.
Vibration:
MIL-STD-202, Method 204
Test Condition G
Shock:
MIL-STD-202, Method 213
Test Condition C
AB
1.406
1.74 MAX
1.015
MAX
.200 TYP. .100
Extended Height
Relay Socket Pounds Grams
.132 60
Relay Socket Weight
Side View Top View
.200 TYP
Ø.078 POLARIZING HOLE
.335 MIN DEEP
CONFIG. E
SHOWN
C
DE
BOTTOM MOUNT CLEARANCE
HOLE FOR .190 SCREW
TOP MOUNT CLEARANCE
HOLE FOR .112 SCREW
/40-01
/40-02
/40-03
/40-04
/40-05
/40-06
/40-07
/40-08
/40-09
/40-10
/40-11
/40-12
RSL116079
RSL116081
RSL116083
RSL116087
RSL116085
RSL116053
RSL116055
RSL116051
RSL116089
RSL116059
RSL116061
RSL116057
Loose
Loose
Loose
Loose
Loose
Loose
Fixed
Fixed
Fixed
Fixed
Fixed
Fixed
14
14
14
14
16
14
14
14
16
14
14
14
16/16
16/20
16/16
16/16
16/16
16/16
16/16
16/16
16/16
16/16
16/16
16/20
/5-116
/5-116
/5-116
/5-117
/5-116
/5-116
/5-116
/5-116
/5-116
/5-116
/5-117
/5-116
A
B
A
E
A
D
C
D
C
B
E
A
M83536/15-022, M83536/16-006,-014,-031,-034
M83536/17-002,-005
Leach Corp KA-D4E & J
M83726/1,2,3,4,28,29,30,31*, M27709-02
M83536/15-022, M83536/16-006,-014,-031,-034
M83726/1,2,3,4,28,29,31,31, N27709-02
M83536/15-022, M83536/16-006,-014,-031,-034
M83726/1,2,3,4,28,29,31,31, N27709-02
M83536/15-022, M83536/16-006,-014,-031,-034
M83726/1,2,3,4,28,29,31,31, M27709-02
M83536/18-002,005,008,012
M83536/19-002,008,012, M83536/20-002
M83536/18-002,-005,-008,-012
M83536/19-002,-008,-012, M83536/20-002
M83536/17-002,-005
Leach Corp KA-D4E & J
Mounting
Stud
.140- .135
1.130
MAX
.220
1.080
1.020
.290
.245
.318
.350
.270 1.085
MAX
.625
1Mating End / Wire Barrel
*Applies to all plug-in type relays of these documents
Relay Socket Dimensions
BLUE STRIPE
.05 R
4 PL
1.035
.517
.148
1.110
1.406
.312
.625
Mounting instructions can be found on page 26
Relay Sockets
10
Amphenol Pcd
www.amphenolpcd.com Milaero@amphenolpcd.com 1-978-624-3400 72 Cherry Hill Drive Beverly, MA 01915
P/N
Contact
MIL-PRF-12883/40
Low Profile RSE 4 Pole/10 Amp
Recommended Mounting
Panel Cutout
Socket Configurations
1Mating End / Wire Barrel
Low Profile Relay Sockets
MIL P/N
M12883
APCD
P/N
QTY Size¹ Config. Mating Relay
Materials
Module Body:
Polyetherimide per ASTM-D5205
Grommet:
Silicone Rubber per A-A-59588
Hardware:
Stainless Steel or Steel w/
Cadmium Chromate Finish
Contact Retainers:
Stainless Steel
Socket Contacts:
Stainless Steel, Hard Gold Plated in
Accordance with SAE-AMS-2422
Operating Range
Temperature:
-65ºC to 125ºC
Insulation Resistance:
1000 Megaohms Min.
Dielectric Withstanding Voltage:
1500 VRMS at Sea Level
500 VRMS at 80,000 ft.
Vibration:
MIL-STD-202, Method 204
Test Condition G
Shock:
MIL-STD-202, Method 213
Test Condition C
AB
1.406
1.74 MAX
1.015
MAX
.200 TYP. .100
Low Profile
Relay Socket Pounds Grams
.100 45
Relay Socket Weight
Side View Top View
.200 TYP
Ø.078 POLARIZING HOLE
.335 MIN DEEP
CONFIG. E
SHOWN
C
DE
BOTTOM MOUNT CLEARANCE
HOLE FOR .190 SCREW
TOP MOUNT CLEARANCE
HOLE FOR .112 SCREW
Mounting
Stud
.093
.890
MAX
.220
1.080
1.020
.290
.245
.290
.350
.270 1.085
MAX
.625
/40-13
/40-14
/40-15
/40-16
/40-17
/40-18
/40-19
/40-20
/40-21
/40-22
/40-23
/40-24
RSE116661
RSE116663
RSE116665
RSE116669
RSE116667
RSE116675
RSE116677
RSE116673
RSE116671
RSE116681
RSE116683
RSE116679
Loose
Loose
Loose
Loose
Loose
Loose
Fixed
Fixed
Fixed
Fixed
Fixed
Fixed
14
14
14
14
16
14
14
14
16
14
14
14
16/16
16/20
16/16
16/16
16/16
16/16
16/16
16/16
16/16
16/16
16/16
16/20
/92-533
/92-533
/92-533
/92-594
/92-533
/92-533
/92-533
/92-533
/92-533
/92-533
/92-534
/92-533
A
B
A
E
A
D
C
D
C
B
E
A
M83536/15-022, M83536/16-006,-014,-031,-034
M83536/17-002, 005
Leach Corp KA-D4E & J
M83726/1,2,3,4,28,29,30,31*, M27709-02
M83536/15-022, M83536/16-006,-014,-031,-034
M83726/1,2,3,4,28,29,30,31*, M27709-02
M83536/15-022, M83536/16-006,-014,-031,-034
M83726/1,2,3,4,28,29,30,31*, M27709-02
M83536/15-022, M83536/16-006,-014,-031,-034
M83726/1,2,3,4,28,29,30,31*, M27709-02
M83836/18-002,-005,-012
M83536/19-002,-005,-008,-012, M83536/20-002
M83836/18-002,-005,-012
M83536/19-002,-005,-008,-012, M83536/20-002
M83536/17-002, 005
Leach Corp KA-D4E & J
*Applies to all plug-in type relays of these documents
Relay Socket Dimensions .05 R
4 PL
.517
1.035
.148
1.406
1.110
.312
.625
Relay Sockets
Mates with M83536, M6106,
M27709, M83726 Relays
Mounting instructions can be found on page 26
BLUE STRIPE
11
Amphenol Pcd
www.amphenolpcd.com Milaero@amphenolpcd.com 1-978-624-3400 72 Cherry Hill Drive Beverly, MA 01915
MIL-PRF-12883/41
Extended Height RSL 2 Pole/10 Amp
Recommended Mounting
Panel Cutout
Socket Configurations
*Mating End / Wire Barrel
Extended Height Relay Sockets
MIL P/N
M12883
APCD
P/N
QTY Size* Config. Mating Relay
P/N
Contact
Mates with M83536, M6106 Relays
Materials
Module Body:
Polyetherimide per ASTM-D5205
Grommet:
Silicone Rubber per A-A-59588
Hardware:
Stainless Steel or Steel w/
Cadmium Chromate Finish
Contact Retainers:
Stainless Steel
Socket Contacts:
Stainless Steel, Hard Gold Plated in
Accordance with SAE-AMS-2422
Operating Range
Temperature:
-65ºC to 125ºC
Insulation Resistance:
1000 Megaohms Min.
Dielectric Withstanding Voltage:
1500 VRMS at Sea Level
500 VRMS at 80,000 ft.
Vibration:
MIL-STD-202, Method 204
Test Condition G
Shock:
MIL-STD-202, Method 213
Test Condition C
1.406
1.74 MAX
.200 TYP.
.100
Extended Height
Relay Socket Pounds Grams
.073 33
Relay Socket Weight
Side View Top View
.200
Ø.078 X .355 MIN DP
POLARIZING HOLE
Mounting
Stud
.140-.135
1.130
.220
1.080
1.020
.290
.245
.318
.350
.270
1.085
MAX
.53 MAX
FIXED STUD STYLE
BLUE STRIPE FOR
REAR RELEASE
LOOSE STUD STYLE
.500
.100
ABC
/41-01
/41-02
/41-03
/41-04
/41-06
/41-07
/41-08
/41-09
RSL116091
RSL116093
RSL116095
RSL116063
RSL116097
RSL116069
RSL116067
RSL116065
Loose
Loose
Loose
Loose
Fixed
Fixed
Fixed
Fixed
8
8
8
8
8
8
8
8
16/16
16/16
16/20
16/16
16/16
16/20
16/16
16/16
/5-116
/5-116
/5-116
/5-116
/5-117
/5-116
/5-116
/5-117
C
B
A
B
C
C
A
C
M83536/9-006, 015, 024, 035
M83536/11-002, 004, 007
Leach Corp JA-D4E & J
M83536/10-006, 015, 024, 034, 038
M83536/9-006, 015, 024, 035
M83536/10-006, 015, 024, 034, 038
M83536/9-006, 015, 024, 035
M83536/10-006, 015, 024, 034, 038
M83536/9-006, 015, 024, 035
M83536/10-006, 015, 024, 034, 038
Leach Corp JA-D4E & J
M83536/11-002, 004, 007
.555
.05 R
4 PL
.1480
1.110
1.406
.277
BOTTOM MOUNT-CLEARANCE
HOLE FOR .190 SCREW TOP
MOUNT - CLEARANCE HOLE
FOR .112 SCREW
Relay Socket Dimensions
Relay Sockets
Mounting instructions can be found on page 25
/41-05
/41-10
RSL116099
RSL116071
8
8
16/16
16/16
/5-116
/5-116
Loose
Fixed 222/22 /101-553
222/22 /101-553
M83536/13-002,-005,-008,-012
M83536/13-002,-005,-008,-012
M83536/13-002,-005,-008,-012
M83536/13-002,-005,-008,-012
D
D
D
12
Amphenol Pcd
www.amphenolpcd.com Milaero@amphenolpcd.com 1-978-624-3400 72 Cherry Hill Drive Beverly, MA 01915
MIL-PRF-12883/41
Low Profile RSE 2 Pole/10 Amp
Recommended Mounting
Panel Cutout
Socket Configurations
*Mating End / Wire Barrel
Low Profile Relay Sockets
MIL P/N
M12883
APCD
P/N
QTY Size* Config. Mating Relay
P/N
Contact
Mates with M83536, M6106 Relays
Materials
Module Body:
Polytherimide per ASTM-D5205
Grommet:
Silicone Rubber per A-A-59588
Hardware:
Stainless Steel or Steel w/
Cadmium Chromate Finish
Contact Retainers:
Stainless Steel
Socket Contacts:
Copper Alloy, Hard Gold Plated in
Accordance with SAE-AMS 2422
Operating Range
Temperature:
-65ºC to 125ºC
Insulation Resistance:
1000 Megaohms Min.
Dielectric Withstanding Voltage:
1500 VRMS at Sea Level
500 VRMS at 80,000 ft.
Vibration:
MIL-STD-202, Method 204
Test Condition G
Shock:
MIL-STD-213, Method 213
Test Condition C
1.406
1.74 MAX
.200 TYP.
.100
Low Profile
Relay Socket Pounds Grams
.055 25
Relay Socket Weight
Side View Top View
.200
Ø.078 X .355 MIN DP
POLARIZING HOLE
Mounting
Stud
.093
.890
.220
1.080
1.020
.290
.245
.290
.350
.270
1.085
MAX
.53 MAX
/40-11
/40-12
/40-13
/40-14
/40-16
/40-17
/40-18
/40-19
RSE116685
RSE116687
RSE116691
RSE116695
RSE116693
RSE116701
RSE116699
RSE116697
Loose
Loose
Loose
Loose
Fixed
Fixed
Fixed
Fixed
8
8
8
8
8
8
8
8
16/16
16/16
16/20
16/16
16/16
16/20
16/16
16/16
/92-533
/92-533
/92-533
/92-533
/92-534
/92-533
/92-533
/92-534
C
A
B
C
C
A
C
M83536/11-002, 004, 007
Leach Corp JA-D4E & J
M83536/9-006, 015, 024, 035
M83536/10-006, 015, 024, 034, 038
M83536/9-006, 015, 024, 035
M83536/10-006, 015, 024, 034, 038
M83536/9-006, 015, 024, 035
M83536/10-006, 015, 024, 034, 038
M83536/11-002, 004, 007
Leach Corp JA-D4E & J
M83536/9-006, 015, 024, 035
M83536/10-006, 015, 024, 034, 038
B
.555
.05 R
4 PL
.1480
1.110
1.406
FIXED STUD STYLE
BLUE GROMMET OR
BLUE STRIPE FOR
REAR RELEASE
LOOSE STUD STYLE
.500
.100
AB C
.277
BOTTOM MOUNT-CLEARANCE
HOLE FOR .190 SCREW TOP
MOUNT - CLEARANCE HOLE
FOR .112 SCREW
Relay Socket Dimensions
Relay Sockets
Mounting instructions can be found on page 26
/41-15
/41-20
RSE116693
RSE116703 8
8
16/16
16/16 /92-553
/92-553
Loose
Fixed 222/22 /92-551
222/22 /92-551
M83536/13-002,-005,-008,-012
M83536/13-002,-005,-008,-012
M83536/13-002,-005,-008,-012
M83536/13-002,-005,-008,-012
D
13
D
D
Relay Sockets
Amphenol Pcd
www.amphenolpcd.com Milaero@amphenolpcd.com 1-978-624-3400 72 Cherry Hill Drive Beverly, MA 01915
MIL-PRF-12883/44
RSE 4 Pole/5 Amp
Recommended Mounting
Panel Cutout
Socket Configurations
*Mating End / Wire Barrel
Low Profile Relay Sockets
MIL P/N
M12883
APCD
P/N
QTY Size*
P/N
Config. Mating Relay
Contact
Mates with M6106, M83536 Relays
Materials
Module Body:
Polyetherimide per ASTM-D5205
Grommet:
Silicone Rubber per A-A-59588
Hardware:
Stainless Steel or Steel w/
Cadmium Chromate Finish
Contact Retainers:
Stainless Steel
Socket Contacts:
Copper Alloy, Hard Gold Plated in
Accordance with SAE-AMS 2422
Operating Range
Temperature:
-65ºC to 125ºC
Insulation Resistance:
1000 Megaohms Min.
Dielectric Withstanding Voltage:
1000 VRMS at Sea Level
500 VRMS at 80,000 ft.
Vibration:
MIL-STD-202, Method 204
Test Condition G
Shock:
MIL-STD-202, Method 213
Test Condition C
AB
.280
BLUE STRIPE FOR
REAR RELEASE
.665 MAX
.187
.093
.80
1.075
1.437 MAX
.79
.375
.150 TYP
BOTTOM MOUNT CLEARANCE
HOLE FOR .164 SCREW
TOP MOUNT CLEARANCE
HOLE FOR .112 SCREW
.05 R
4 PL
.412
.880
1.075
.500
Low Profile
Relay Socket Pounds Grams
.055 25
Relay Socket Weight
Side View Top View
.760 MAX
.695 MAX
.290
.570
.150 TYP
POLARIZING HOLE
CONFIG. B
SHOWN
C
.825
.250
.250
.500
D
/44-01
/44-02
/44-03
/44-04
RSE120151
RSE120153
RSE120155
RSE120157
14
16
16
16
20/20
20/20
20/20
20/20
/101-553
/101-553
/101-553
/101-553
A
B
D
C
M83536/5-006,-014,-022,-030
M83536/7-002
M83536/6,-006,-014,-022,-032
Relay Socket Dimensions
Mounting instructions can be found on page 26
14
Amphenol Pcd
www.amphenolpcd.com Milaero@amphenolpcd.com 1-978-624-3400 72 Cherry Hill Drive Beverly, MA 01915
MIL-PRF-12883/45
RSE 2 Pole/5 Amp
Recommended Mounting
Panel Cutout
Socket Configurations
Low Profile Relay Sockets
MIL P/N
M12883
APCD
P/N
QTY Size¹
P/N
Config. Mating Relay
Contact
Materials
Socket Body:
Polyetherimide per ASTM -D5205
Grommet:
Silicone Rubber per A-A-59588
Hardware:
Stainless Steel or Steel w/
Cadmium Chromate Finish
Contact Retainers:
Stainless Steel
Socket Contacts:
Copper Alloy, Hard Gold Plated in
Accordance with SAE-AMS 2422
Operating Range
Temperature:
-65ºC to 125ºC
Insulation Resistance:
1000 Megaohms Min.
Dielectric Withstanding Voltage:
1000 VRMS at Sea Level
500 VRMS at 80,000 ft.
Vibration:
MIL-STD-202, Method 204
Test Condition G
Shock:
MIL-STD-202, Method 213
Test Condition C
AB
.280
BLUE GROMMET OR
BLUE STRIPE FOR
REAR RELEASE
.665 MAX
.187
.093
.80
1.075
1.437 MAX
.39
.375
.150 TYP
BOTTOM MOUNT CLEARANCE
HOLE FOR .164 SCREW
TOP MOUNT CLEARANCE
HOLE FOR .112 SCREW
.05 R
4 PL
.425
.880
1.075
.212
Low Profile
Relay Socket Pounds Grams
.033 15
Relay Socket Weight
Side View Top View
.760 MAX
.695 MAX
.290
.570
.150
.075
POLARIZING HOLE
CONFIG. A
SHOWN
C
/45-01
/45-02
/45-03
RSE120159
RSE120161
RSE120163
8
8
8
20/20
20/20
20/20
/101-553
/101-553
/101-553
A
B
C
M83536/1-006, -015, -024, -033
M83536/2-006, -015, -024, -035
Relay Socket Dimensions
Mates with M6106, M83536 Relays
Relay Sockets
Mounting instructions can be found on page 26
*Mating End / Wire Barrel
15
Relay Sockets
Amphenol Pcd
www.amphenolpcd.com Milaero@amphenolpcd.com 1-978-624-3400 72 Cherry Hill Drive Beverly, MA 01915
MIL-PRF-12883/45
RSE 2 Pole/5 Amp
Recommended Mounting
Panel Cutout
Socket Configurations
1Mating End / Wire Barrel
Low Profile Relay Sockets
MIL P/N
M12883
APCD
P/N
QTY Size1
P/N
Config. Mating Relay
Contact
Mates with M6106/38 Relays
Materials
Socket Body:
Polyetherimide per ASTM-D5205
Grommet:
Silicone Rubber per A-A-59588
Hardware:
Stainless Steel or Steel w/
Cadmium Chromate Finish
Contact Retainers:
Stainless Steel
Socket Contacts:
Copper Alloy, Hard Gold Plated in
Accordance with with SAE-AMS 2422
Operating Range
Temperature:
-65ºC to 125ºC
Insulation Resistance:
1000 Megaohms Min.
Dielectric Withstanding Voltage:
1000 VRMS at Sea Level
500 VRMS at 80,000 ft.
Vibration:
MIL-STD-202, Method 204
Test Condition G
Shock:
MIL-STD-202, Method 213
Test Condition C
AB
.280
BLUE GROMMET OR
BLUE STRIPE FOR
REAR RELEASE
.665 MAX
.187
.113
.80
1.075
1.437 MAX
.39 .190
.150
.450
.300
.106
BOTTOM MOUNT CLEARANCE
HOLE FOR .164 SCREW
TOP MOUNT CLEARANCE
HOLE FOR .112 SCREW
.05 R
4 PL
.425
.880
1.075
.212
Low Profile
Relay Socket Pounds Grams
.033 15
Relay Socket Weight
Side View Top View
.760 MAX
.695 MAX
.290
.570
.150
.075
.075
.053
POLARIZING HOLE
CONFIG. B
SHOWN
/45-04
/45-05
/45-06
RSE120165
RSE120167
RSE120169
6
6
6
20/20
20/20
20/20
/101-553
/101-553
/101-553
A
B
C
M6106/38-002
/101-552
/101-552
/101-552
22/22
22/22
22/22
4
4
4
C
Relay Socket Dimensions
Mounting instructions can be found on page 26
16
Amphenol Pcd
www.amphenolpcd.com Milaero@amphenolpcd.com 1-978-624-3400 72 Cherry Hill Drive Beverly, MA 01915
/46-01
/46-02
/46-03
RSE116747
RSE116749
RSE116751
9
9
9
16/16
16/16
16/16
/101-554
/101-554
/101-554
A
B
C
M83536/21-006,-014,-022,-030
M83536/22-006,-014,-022,-030
/101-553
/101-553
/101-553
20/20
20/20
20/20
2
2
2
/46-04 RSE116753 916/16 /101-554 D
/101-553
20/20
2
M6106/40-002
MIL P/N
M12883 P/N
APCD
P/N
Contact
MIL-PRF-12883/46
RSE 3 Pole/10 Amp
Recommended Mounting
Panel Cutout
Socket Configurations
1Mating End / Wire Barrel
Low Profile Relay Sockets
QTY Size1Config. Mating Relay
Mates with M83536, M6106 Relays
Materials
Socket Body:
Polyetherimide per ASTM -D5205
Grommet:
Silicone Rubber per A-A-59588
Hardware:
Stainless Steel or Steel w/
Cadmium Chromate Finish
Contact Retainers:
Stainless Steel
Socket Contacts:
Copper Alloy, Hard Gold Plated in
Accordance with SAE-AMS 2422
Operating Range
Temperature:
-65ºC to 125ºC
Insulation Resistance:
1000 Megaohms Min.
Dielectric Withstanding Voltage:
1250 VRMS at Sea Level
500 VRMS at 80,000 ft.
Vibration:
MIL-STD-202, Method 204
Test Condition G
Shock:
MIL-STD-202, Method 213
Test Condition C
CD
.665 MAX
.760 MAX
.280
.290
BLUE GROMMET OR
BLUE STRIPE FOR
REAR RELEASE
.695 MAX
.187
.093
.80
.115
1.075
1.437 MAX
.79 .250
POLARIZING
HOLE
CONFIG. B
SHOWN
Low Profile
Relay Socket Pounds Grams
.055 25
Relay Socket Weight
Side View Top View
BOTTOM MOUNT CLEARANCE
HOLE FOR .164 SCREW
TOP MOUNT CLEARANCE
HOLE FOR .112 SCREW
.825
.05 R
4 PL
.880
1.075
.500
.250
AB
.412
.570
.400
.300
.200
.100
.500
.230
.345 .460
.490
Relay Socket Dimensions
Mounting instructions can be found on page 26
Relay Sockets
17
Relay Sockets
MIL P/N
M12883
APCD
P/N
Mounting
Stud
QTY Size¹
P/N
Config. Mating Relay
Contact
/47-01
/47-02
/47-04
/47-05
RSE116755
RSE116757
RSE116761
RSE116763
Loose
Loose
Fixed
Fixed
20
20
20
20
16/16
16/16
16/16
16/16
/92-533
/92-533
/92-533
/92-533
A
B
B
A
M83536/27-002
M83536/27-002
M83536/25-002, M83536/26-002
M83536/25-002, M83536/26-002
MIL P/N
M12883 P/N
APCD
Stud
Mounting
P/N
Contact
/47-07
/47-08
/47-10
/47-11
RSL116101
RSL116103
RSL116073
RSL116075
Loose
Loose
Fixed
Fixed
20
20
20
20
16/16
16/16
16/16
16/16
/5-116
/5-116
/5-116
/5-116
A
B
B
A
M83536/25-002, M83536/26-002
M83536/27-002
M83536/25-002, M83536/26-002
M83536/27-002
QTY Size¹ Config. Mating Relay
Amphenol Pcd
www.amphenolpcd.com Milaero@amphenolpcd.com 1-978-624-3400 72 Cherry Hill Drive Beverly, MA 01915
MIL-PRF-12883/47
RSE/RSL 6 Pole/10 Amp
Recommended Mounting
Panel Cutout
Socket Configurations
Extended Height
Low Profile
Relay Socket A BC Max
1.03 .140-.135 1.25
1.08 .093 .890
D
.318
.290
Low Profile Relay Sockets
Extended Height Relay Sockets
Mates with M83536, M83536 Relays
Materials
Socket Body:
Polyetherimide per ASTM-D5205
Grommet:
Silicone Rubber per A-A-59588
Hardware:
Stainless Steel or Steel w/
Cadmium Chromate Finish
Contact Retainers:
Stainless Steel
Socket Contacts:
Copper Alloy, Hard Gold Plated in
Accordance with SAE-AMS 2422
Operating Range
Temperature:
-65ºC to 125ºC
Insulation Resistance:
1000 Megaohms Min.
Dielectric Withstanding Voltage:
1500 VRMS at Sea Level
500 VRMS at 80,000 ft.
Vibration:
MIL-STD-202, Method 204
Test Condition G
Shock:
MIL-STD-202, Method 213
Test Condition C
AB
.350
.270
FIXED STUD STYLE
D
.290
.245
BLUE STRIPE FOR
REAR RELEASE
1.085 MAX
C
.220
LOOSE STUD STYLE
B
A
.200 TYP
1.437
1.74 MAX
1.500
MAX 1.000
.200 TYP
CONFIG. A
SHOWN
Extended Height
Low Profile
Relay Socket Pounds Grams
.144 65
.176 80
Relay Socket Weight
Side View Top View
BOTTOM MOUNT CLEARANCE
HOLE FOR .190 SCREW
TOP MOUNT CLEARANCE
HOLE FOR .112 SCREW
1.600
.05 R
4 PL
1.11
1.437
.500
1.000
¹Mating End / Wire Barrel
Relay Socket Dimensions
Mounting instructions can be found on page 26
18
/48-01
/48-02
/48-05
/48-06
RSE112061
RSE112063
RSE112065
RSE112067
Loose
Fixed
Fixed
Loose
2
2
2
2
16/16
16/16
16/16
16/16
/92-533
/92-533
/92-533
/92-533
A
A
B
B
MS27743-06, -12, -18, -24
MS27743-09, -15, -21, -27
9 12/12 /92-535
9 12/12 /92-535
9 12/12 /92-535
9 12/12 /92-535
MS27743-09, -15, -21, -27
MS27743-06, -12, -18, -24
MIL P/N
M12883
APCD
P/N
Mounting
Stud
QTY Size1
P/N
Config. Mating Relay
Contact
/48-03
/48-04
/48-07
/48-08
RSL112105
RSL112101
RSL112107
RSL112103
Loose
Fixed
Fixed
Loose
2
2
2
2
16/16
16/16
16/16
16/16
/5-116
/5-116
/5-116
/5-116
A
A
B
B
MIL P/N
M12883
APCD
P/N
Mounting
Stud
QTY Size1
P/N
Config. Mating Relay
Contact
MS27743-06, -12, -18, -24
MS27743-09, -15, -21, -27
9 12/12 /5-118
9 12/12 /5-118
9 12/12 /5-118
9 12/12 /5-118
MS27743-09, -15, -21, -27
MS27743-06, -12, -18, -24
Amphenol Pcd
www.amphenolpcd.com Milaero@amphenolpcd.com 1-978-624-3400 72 Cherry Hill Drive Beverly, MA 01915
MIL-PRF-12883/48
RSE/RSL 3 Pole/25 Amp
Recommended Mounting
Panel Cutout
Socket Configurations
1Mating End / Wire Barrel
Extended Height
Low Profile
Relay Socket A BC Max
1.03 .140-.135 1.25
1.00 .093 .890
D
.318
.290
Low Profile Relay Sockets
Extended Height Relay Sockets
Mates with MS27743 Relays
Materials
Socket Body:
Polyetherimide per ASTM-D5205
Grommet:
Silicone Rubber per A-A-59588
Hardware:
Stainless Steel or Steel w/
Cadmium Chromate Finish
Contact Retainers:
Stainless Steel
Socket Contacts:
Copper Alloy, Hard Gold Plated in
Accordance with SAE-AMS 2422
Operating Range
Temperature:
-65ºC to 125ºC
Insulation Resistance:
1000 Megaohms Min.
Dielectric Withstanding Voltage:
1500 VRMS at Sea Level
500 VRMS at 80,000 ft.
Vibration:
MIL-STD-202, Method 204
Test Condition G
Shock:
MIL-STD-202, Method 213
Test Condition C
AB
.350
.270
FIXED STUD STYLE
D
.290
.245
BLUE GROMMET OR
BLUE STRIPE FOR
REAR RELEASE
1.085 MAX
C
.220
LOOSE STUD STYLE
B
A
.150 TYP
1.406
1.74 MAX
1.015
MAX .625
.630
.432
.234
.312
BOTTOM MOUNT CLEARANCE
HOLE FOR .190 SCREW
TOP MOUNT CLEARANCE
HOLE FOR .112 SCREW
.05 R
4 PL
1.100
.550
1.160
1.406
.312
.625
Extended Height
Low Profile
Relay Socket Pounds Grams
.129 55
.109 49
Relay Socket Weight
Side View Top View
Relay Socket Dimensions
Relay Sockets
Mounting instructions can be found on page 25
19
Relay Sockets
Amphenol Pcd
www.amphenolpcd.com Milaero@amphenolpcd.com 1-978-624-3400 72 Cherry Hill Drive Beverly, MA 01915
Track Materials
Outer Track:
Aluminum Alloy per QQ-A-225.
Chemical Coating per
MIL-C-5541, Class 3
Inner Brackets and Rivets:
Stainless Steel per QQ-S-766, Passivated
Latch:
Beryllium copper #172 per QQ-C-533
Bright Finish
Wiring Protector:
Aramid Paper per MIL-I-24202
Track Operating Range:
-65ºC to 125ºC
RSE116175
RSE116185
Relay Socket Pounds Grams
.016 7
.031 14
RST145005
Part Number Pounds Grams
.053 24
RSE116195 .031 14
MIL-PRF-12883/52, MIL-PRF-12883/53
RSE Track Mount 2, 3, & 4 Pole & Mounting Track
Socket Dimensions
1Mating End / Wire Barrel
Low Profile Relay Sockets
MIL P/N
M12883*
APCD
P/N*
QTY Size¹
P/N
Config. Mating Relay
Contact
Mates with MS83726, M83536
& M6106 Relays
Materials
Socket Body:
Polyetherimide per ASTM-D5205
Grommet:
Silicone Rubber per A-A-59588
Contact Retainers:
Beryllium Copper
Socket Contacts:
Copper Alloy, Hard Gold Plated in
Accordance with MIL-G-45204
Operating Range
Temperature:
-65ºC to 125ºC
Insulation Resistance:
1000 Megaohms Min.
Dielectric Withstanding Voltage:
1500 VRMS at Sea Level
700 VRMS at 80,000 ft.
Vibration:
MIL-STD-202, Method 204
Test Condition G
Shock:
MIL-STD-202, Method 213
Test Condition C
Relay Socket Weight
/52-001
/52-002
/52-003
RSE116175
RSE116185
RSE116195
8
14
9
20/20
16/16
20/20
/101-553
/101-533
/101-554
A
B
C
M8536/6-025
2 20/20 /101-553 M83536/22-025
M83536/2-028, M83726/27, /25
POLARIZING HOLE
.150 TYP
.150 TYP
.150 TYP
.150 TYP
.790
.390
.200 TYP
.230 TYP
.115 TYP
.790
.100 TYP
.770
MAX
.945
.375
Track Weight
C
A
B
Track Dimensions
*These Relay Sockets are used in the track mount system with track M12883/53-001, Amphenol Pcd P/N RST145005
M12883/53-001 Mounting Track Dimensions
Use tool M6106/32-001 to remove M1288/52 sockets.
Use tool M6106/31-001 to remove relays from this mounting bracket.
BLACK MARKING .06 HT
DATE CODE
4X .46±.03
1.720
±.015
.065 TYP
2X LATCH
STRIP
INNER
BRACKET
8X RIVET
FRAME WIRING
PROTECTOR
1.060 MAX
ACROSS RIVETS
.810 MAX
1.625 M
.81
20
Amphenol Pcd
www.amphenolpcd.com Milaero@amphenolpcd.com 1-978-624-3400 72 Cherry Hill Drive Beverly, MA 01915
MIL-PRF-12883/54
RSE 3 Pole/25 Amp
Recommended Mounting
Panel Cutout
Socket Configurations
Low Profile Relay Sockets
MIL P/N
M12883
APCD
P/N
QTY Size*
P/N
Config. Mating Relay
Contact
Mates with M6106/12, /13 & MS27742 Relays
Materials
Socket Body:
Polyetherimide per ASTM-D5205
Grommet:
Silicone Rubber per A-A-59588
Hardware:
Stainless Steel or Steel w/
Cadmium Chromate Finish
Contact Retainers:
Stainless Steel
Socket Contacts:
Copper Alloy, Hard Gold Plated in
Accordance with SAE-AMS 2422
Operating Range
Temperature:
-65ºC to 125ºC
Insulation Resistance:
1000 Megaohms Min.
Dielectric Withstanding Voltage:
1500 VRMS at Sea Level
500 VRMS at 80,000 ft.
Vibration:
MIL-STD-202, Method 204
Test Condition G
Shock:
MIL-STD-202, Method 213
Test Condition C
.295
.265
BLUE STRIPE FOR
REAR RELEASE
.220
.093
1.00
1.406
DIA .078 X .355/.380 DP
POLARIZING HOLE
1.015
MAX
.630
.432
BOTTOM MOUNT CLEARANCE
HOLE FOR .190 SCREW
TOP MOUNT CLEARANCE
HOLE FOR .112 SCREW
.05 R
4 PL
.550
1.160
1.406
.625
Relay Socket Weight
Side View Top View
1.00 MAX
.890
MAX
.290
.290
.245
.150
.300
CONFIG. A
SHOWN
/54-01
/54-02
/54-03
/54-04
RSE116627
RSE116631
RSE116629
RSE116635
Fixed
Fixed
Fixed
Fixed
5
5
2
2
16/16
20/20
20/20
16/16
/92-533
/92-533
/92-532
/92-532
A
B
D
C
M6106/13-004
MS27742-2
612/12
/92-535
612/12
/92-535
516/16
/92-533
216/16
/92-535
M6106/12-002
M6106/13-002,-008,-011,-013,-015
612/12
/92-535
912/12
/92-535
Mounting
Stud
AB
D
C
RSE116627
RSE116631
Relay Socket Pounds Grams
.132 60
.132 60
RSE116629
RSE116635
.154 70
.154 70
.312
1.100
.234
.117
.625 .312
1.74 MAX
Relay Socket Dimensions
Relay Sockets
Mounting instructions can be found on page 26
21
Amphenol Pcd
www.amphenolpcd.com Milaero@amphenolpcd.com 1-978-624-3400 72 Cherry Hill Drive Beverly, MA 01915
/55-01
/55-02
/55-03
RSE112035
RSE112036
RSE112044
Fixed
Fixed
Fixed
2
2
2
16/16
22/22
16/16
/92-533
/92-533
/92-531
A
A
B
M6106/19-004, -007,
-012, -017, -022
3 12/12 /92-535
3 12/12 /92-535
2 16/16 /92-533 M6106/20-002
M6106/19-004, -007,
-012, -017, -022
3 12/12 /92-535
MIL-PRF-12883/55
RSE 1 Pole/25 Amp
Recommended Mounting
Panel Cutout
Socket Configurations
1Mating End / Wire Barrel
Low Profile Relay Sockets
MIL P/N
M12883
APCD
P/N
Mounting
Stud
QTY Size1
P/N
Config. Mating Relay
Contact
Mates with M6106/19, /20 Relays
Materials
Socket Body:
Polyetherimide per ASTM-D5205
Grommet:
Silicone Rubber per A-A-59588
Hardware:
Stainless Steel or Steel w/
Cadmium Chromate Finish
Contact Retainers:
Stainless Steel
Socket Contacts:
Copper Alloy, Hard Gold Plated in
Accordance with SAE-AMS 2422
Operating Range
Temperature:
-65ºC to 125ºC
Insulation Resistance:
1000 Megaohms Min.
Dielectric Withstanding Voltage:
1500 VRMS at Sea Level
500 VRMS at 80,000 ft.
Vibration:
MIL-STD-202, Method 204
Test Condition G
Shock:
MIL-STD-202, Method 213
Test Condition C
AB
.350
.265
.290
.290
.245
BLUE STRIPE FOR
REAR RELEASE
1.085
MAX
.890
MAX
.220
.093
1.000
1.406
1.74 MAX
2X .130
.530
.630
.432
.234
.117
Low Profile
Relay Socket Pounds Grams
.073 33
Relay Socket Weight
Relay Socket Dimensions
Side View Top View
2X .100
CONFIG B.
SHOWN
Relay Sockets
Mounting instructions can be found on page 26
.555
.05 R
4 PL
.1480
1.110
1.406
.277
BOTTOM MOUNT-CLEARANCE
HOLE FOR .190 SCREW TOP
MOUNT - CLEARANCE HOLE
FOR .112 SCREW
22
Relay Sockets
Amphenol Pcd
www.amphenolpcd.com Milaero@amphenolpcd.com 1-978-624-3400 72 Cherry Hill Drive Beverly, MA 01915
RSE120020
RSE120074
8
8
22/20
22/20
CNS109900
CNS109900
A
B
APCD P/N Contact P/N
Microminiature Relay Sockets
RSE 2 & 3 Pole, 2 Amp
Socket Configurations
Relay Sockets for 2 Pole/ 2 Amp Microminiature Relays
QTY Size Config. Mating Relay
Mates with M39016 & M5757 Relays
Materials
Module Body:
Polyetherimide per ASTM-D5205
Grommet:
Silicone Rubber per A-A-59588
Hardware:
Stainless Steel or Steel w/
Cadmium Chromate Finish
Contact Retainers:
Stainless Steel
Socket Contacts:
Copper Alloy, Hard Gold Plated in
Accordance with SAE-AMS 2422
Operating Range
Temperature:
-65ºC to 125ºC
Insulation Resistance:
1000 Megaohms Min.
Dielectric Withstanding Voltage:
2500 VRMS at Sea Level
700 VRMS at 80,000 ft.
Vibration:
MIL-STD-202, Method 204
Test Condition G
Shock:
MIL-STD-202, Method 213
Test Condition C
RSE120020
Relay Socket Pounds Grams
.024 11
Relay Socket Weight
RSE120074 .024 11
RSN120070 .044 20
RSE120020 RSE120074 RSE120070
Side View
Top View
Side View
Top View
Side View
Top View
Side View
C
AB
RSE120070 14 22/20 CNS109900 C
APCD P/N Contact P/N
Relay Sockets for 3 Pole/ 2 Amp Microminiature Relays
QTY Size Config. Mating Relay
MIL-R-39016/55-001,-013,-025,-037
MIL-R-5757/10-022,-044
MIL-R-39016/39-002,-008,-014
.810
Max
.710 Max
.400
.200
1.000 1.250
.200 TYP
.062 TYP
.200
1.010
Max
.750 Max
.610
1.430
.1.200
.200 TYP
.200 TYP
.400 TYP
.710 Max
.810 Max
.400
.200
1.300
.200
POLARIZING
HOLE
1.062
.200 TYP
Product Description
Microminiature Relay Sockets are
designed to mate with M39016 & M5757
Microminiature Relays. Amphenol Pcd
supplies three separate relay sockets for
customers using Microminiature Relays.
Relay Socket Dimensions
Mounting instructions can be found on page 26
23
Relay Sockets
Amphenol Pcd
www.amphenolpcd.com Milaero@amphenolpcd.com 1-978-624-3400 72 Cherry Hill Drive Beverly, MA 01915
RSN116140
RSN116130
RSN112010
14
8
9
16/16
12/12
16/16
/92-533
/92-533
/92-535
A
B
C
APCD P/N Contact P/N
Board Mount MIL-PRF-12883
RSN 2,4 Pole/10 Amp, 3 Pole/25 Amp
Socket Configurations
Board Mount Relay Sockets
QTY Size¹ Config. Mating Relay
Mates with MIL-R-6106 & MS27743 Relays
Materials
Module Body:
Polyetherimide per ASTM-D5205
Hardware:
Stainless Steel or Steel w/
Cadmium Chromate Finish
Contact Retainers:
Stainless Steel
Socket Contacts:
Copper Alloy, Hard Gold Plated in
Accordance with SAE-AMS 2422
Operating Range
Temperature:
-65ºC to 125ºC
Insulation Resistance:
1000 Megaohms Min.
Dielectric Withstanding Voltage:
1500 VRMS at Sea Level
500 VRMS at 80,000 ft.
Vibration:
MIL-STD-202, Method 204
Test Condition G
Shock:
MIL-STD-202, Method 213
Test Condition C
RSN116140
Relay Socket Pounds Grams
.055 25
Relay Socket Weight
Relay Socket Dimensions
RSN112010 .057 26
RSN116130 .033 15
.203 TYP
RSN116140 RSN116130 RSN112010
Side View
Top View
Side View
Top View
Side View
Top View
Side View
C
A B
Product Line of pluggable, PC board
mount relay sockets allows separable
mounting of relays direct to boards in
airborne or ground applications.
Polyetherimide body and scalloped
mounting flange reduce weight and
improve strength. Mounting hardware
supplied with connector secures firmly to
board and eliminates stress on solder
contacts. Gold-plated contacts and
solder-dipped contact tails are available.
Meets all applicable specifications.
216/16 /92-533
.050
Ø.050 TY
.220
.450
.100
.200
TYP
.200
TYP
1.406 1.715
.625
1.000
.200 TYP
.100
.200 TYP
.100
1.406 1.725
.500
.450
.220
Ø .050 TYP
.050
.203 TYP
.450
.220
9X Ø.080
2X Ø.050
.050
.203 TYP
.300
.150
1.715 1.406
.630.432 .234
.625
1.000
Product Description
MIL-R-6106, MS27400
MIL-R-6106, MS27401
MIL-R-6106, MS27743
Mounting instructions can be found on page 26
24
Relay Sockets
Amphenol Pcd
www.amphenolpcd.com Milaero@amphenolpcd.com 1-978-624-3400 72 Cherry Hill Drive Beverly, MA 01915
RSN116820
RSN116890
MS25330
MS25328
MS25329 (6 Pole/5 Amp)
MS25327 (4 Pole/10 Amp)
APCD P/N
Non-Environmental Relay Sockets
Solder Termination
6 Pole/5 Amp, 4 Pole/10 Amp, 2 & 4 Pole/5 Amp, 2 Pole /10Amp
Socket Configurations
Solder Termination Relay Sockets
Ref MIL STD Socket MIL STD Relay Leach Corp Relay
Materials
Socket Body:
Polyetherimide per ASTM-D5205
Hardware:
Stainless Steel or Steel w/
Cadmium Chromate Finish
Contact Retainers:
Stainless Steel
Socket Contacts:
Copper Alloy, Hard Gold Plated in
Accordance with SAE-AMS 2422
Operating Range
Temperature:
-65ºC to 125ºC
Insulation Resistance:
1000 Megaohms Min.
Dielectric Withstanding Voltage:
1500 VRMS at Sea Level
500 VRMS at 80,000 ft.
Vibration:
MIL-STD-202, Method 204
Test Condition G
Shock:
MIL-STD-202, Method 213
Test Condition C
RSE120020
Relay Socket Pounds Grams
.024 11
Relay Socket Weight
RSE120074 .024 11
RSN120070 .044 20
Solder Termination
RSN116820
RSN116800
Side View
RSN116810
RSN116891
RSN116825
RSN116890
9224 Series
9226 Series
RSN116891 MS25462 MS25461 (4 Pole/10 Amp) 9225 Series
RSN116800
RSN116810
MS25326
MS25322
MS25325 (4 Pole/5 Amp)
MS25321 (2 Pole/10 Amp) 9229 Series
9220 Series
RSN116825 MS25324 MS25323 (2 Pole/10 Amp) 9227 Series
.188
1.200
.093
.080
1.844 2.196
.176
.600
.152
.304
.290
.290
.145
1.884 2.196
1.03
.266
Ø1.00
.093
.083
RSN116820
RSN116800 RSN116810
RSN116891
RSN116825
RSN116890
.264
.088 .188
1.000
.093 .080
1.062
Max
.176
.304
.152
2.196
1.844
1.500
.750
1.844
.145
.290
.435
.290
.145 .266
2.250 Ø1.300
.083
.093 1.500
.750
1.844
.145
.290
.435
.290
.145 .266
2.250 Ø1.300
.083
.093 1.500
.750
1.844
.145
.290
.435
.290
.145 .266
2.250 Ø1.300
.083
.093
Solder Termination Relay Sockets with
Polyetherimide body and scalloped mounting
flange to reduce weight and improve strength.
Mounting hardware supplied with product.
Product Description
Relay Socket Dimensions
Mounting instructions can be found on page 26
Mates with M25027 & Series 9226, 9224, 9225,
9220, 9229, 9927 Leach Corp. Relays
25
Amphenol Pcd
www.amphenolpcd.com Milaero@amphenolpcd.com 1-978-624-3400 72 Cherry Hill Drive Beverly, MA 01915
Relay Socket Mounting Instructions
Top Mount & Bottom Mount
Silicone Rubber Gasket
(Supplied With Relay)
4-40 Pan Head Screw
# 4 Lock Washer
# 10-32 Mounting Stud
# 10 Flat Washer (3)
Mounting Panel
# 10-32 Self-Lock Hex Nut
TOP MOUNT
Silicone Rubber Gasket
(Supplied With Relay)
4-40 Pan Head Screw
# 4 Lock Washer
# 10-32 Mounting Stud
Mounting Panel
# 10-32 Self-Lock Hex Nut
Non-Enviromental Solder Termination Relay Sockets
BOTTOM MOUNT
Mounting Instructions
Relay Mounting Bracket (Ref.)
Stud
Spacer (.050 Thick)
Lock Washer
.090 Max. Mounting Panel
4-40 Hex Lock Nut
2-56 Screw (4-40 Config. C)
Lock Washer
Relay Mounting Bracket (Ref.)
Stud
Lock Washer
.050 Max. Mounting Panel
4-40 Hex Lock Nut
2-56 Screw (4-40 Config. C)
Lock Washer
Mircominature Relay Sockets
TOP MOUNT
BOTTOM MOUNT
Mounting Instructions
Silicone Rubber Gasket (Supplied With Relay)
Relay Mounting Bracket (Ref.)
Stud
4-40 Hex Lock Nut
Flat Washers
.125 Max. Mounting Panel
4-40 Hex Lock Nut
Relay Mounting Bracket (Ref.)
Stud
4-40 Hex Lock Nut
Flat Washers
.093 Max. Mounting Panel
4-40 Hex Lock Nut
Silicone Rubber Gasket (Supplied With Relay)
10-32 Hex Lock Nut
MIL-PRF-12883/40, MIL-PRF-12883/41
MIL-PRF-12883/47, MIL-PRF-12883/48
MIL-PRF-12883/54, MIL-PRF-12883/55
TOP MOUNT
BOTTOM MOUNT
Mounting Instructions
Silicone Rubber Gasket (Supplied With Relay)
Relay Mounting Bracket (Ref.)
Stud
4-40 Hex Lock Nut
Flat Washers
.125 Max. Mounting Panel
4-40 Hex Lock Nut
Relay Mounting Bracket (Ref.)
Stud
4-40 Hex Lock Nut
Flat Washers
.093 Max. Mounting Panel
4-40 Hex Lock Nut
Silicone Rubber Gasket (Supplied With Relay)
8-32 Hex Lock Nut
TOP MOUNT
BOTTOM MOUNT
MIL-PRF-12883/44, MIL-PRF-12883/45
MIL-PRF-12883/46
Mounting Instructions
26
