TXL035-1515D - TRACO ELECTRONIC AG

http://www.tracopower.com Page 1 of 4

AC/DC Enclosed Power Supply TXL 035 Series, 35 Watt

Models

• Compact metal case with screw

terminal block

• Dual output models with isolated

outputs

• Universal input 85 - 264 Vac

• EMI/EMC compliance with EN 61000-6-3

and EN 61000-6-1

• Compliance to EN 61000-3-2

• Short circuit and overvoltage protection

• International safety approvals

• 3 year product warranty

The TRACOPOWER TXL series is a family of encased power supplies designed

for a wide range of cost critical applications. With a low proﬁle metal case and

screw terminal block connection, they are easy to install in any equipment.

These power supplies have universal input and comply with European EMC stan-

dards and the Low Voltage Directive (LVD).

Order Code Power Output voltage Output current max. Efﬁciency

max. Vout 1 Vout 2 Vout 1 Vout 2 typ.

TXL 035-3.3S 30 W 3.3 VDC 9.0 A 74 %

TXL 035-05S 35 W 5 VDC 7.0 A 79 %

TXL 035-12S 36 W 12 VDC 3.0 A 82 %

TXL 035-15S 36 W 15 VDC 2.4 A 84 %

TXL 035-24S 36 W 24 VDC 1.5 A 85 %

TXL 035-48S 38 W 48 VDC 0.8 A 86 %

TXL 035-0512D 1) 35 W +5 VDC +12 VDC 4.0 A 2.5 A 79 %

TXL 035-0524D 1) 35 W +5 VDC +24 VDC 4.0 A 1.3 A 79 %

TXL 035-1212D 1) 36 W +12 VDC –12 VDC 3.0 A 1.5 A 83 %

TXL 035-1515D 1) 36 W +15 VDC –15 VDC 2.4 A 1.5 A 84 %

Models

C B

Scheme

U L 6 0 950 -1

1) Total power should not exceed max. output power

TXL 035 Series, 35 Watt

http://www.tracopower.com Page 2 of 4

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

Input Specifications

Input voltage range – nominal 100 – 240 VAC

– AC range (universal input) 88 – 264 VAC

– DC range 125 – 375 VDC

Input frequency 47 – 63 Hz

Input current at full load – at 100 VAC 1.0 A max.

Input inrush current – at 115 VAC / 230 VAC 30 A max. / 50 A max.

Zero load power consumption only single output models: 0.5 W max. (green mode function)

Recommended circuit breaker (characteristic C or slow bow fuse) 5 A

Output Specifications

Output voltage adjustment range ±10 % (only Vout 1)

Regulation – Input variation 1.0 % max.

– Load variation (20 - 100%) main output: 2.0 % max.

Vout 2: 5.0 % max.

Minimum load single output models: not required

dual output models: Vout 1 requires 0.3 A

Temperature coefficient 0.02 %/K

Start-up time 1 s max.

Rise time single output models: 20 ms max.

dual output models: 30 ms max.

Hold-up time single output models: 40 ms min.

dual output models: 60 ms min.

Ripple and noise – measured with external capacitors:

0.1 µF and 47 µF parallel capacitor

(20Mhz Bandwidth) – Vout 1 3.3 & 5 Vout models: 70 mVp-p typ.

12 Vout model: 120 mVp-p typ.

15 & 24 Vout models: 150 mVp-p typ.

48 Vout model: 200 mVp-p typ.

– Vout 2 (-)12 VDC models: 120 mVp-p typ.

15 VDC models: 150 mVp-p typ.

Overload protection by current limitation 105 – 150 % of Iout max.

Short circuit protection hiccup mode (automatic recovery)

Overvoltage protection (Latch off, recovery after restart) 115 – 140 % of nominal Vout (only Vout 1)

Capacitive load www.tracopower.com/products/txl-capload.pdf

General Specifications

Temperature ranges – Operating –20°C to +70°C

(with derating)

– Storage

–40°C to +85°C

Output power derating – Temperature 2.5 %/K above +50°C

– Low input voltage 0.8 %/V below 100 VAC

Cooling natural convection (20 lfm), no internal fan

Humidity (non condensing) 20 – 90 % rel. H max.

Altitude during operation 2000 m

Isolation voltage (60 sec.) – Input / Output 3000 VAC

– Input / PE 1500 VAC

– Output / PE 500 VAC

Isolation resistance (at 500 VDC) 100 MOhm min.

Leakage current (at 264 VAC/60Hz) 1 mA max.

TXL 035 Series, 35 Watt

http://www.tracopower.com Page 3 of 4

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

General Specifications (continued)

Switching frequency 65 kHz typ. (pulse width modulation)

Reliability (calculated MTBF) single output models: > 400‘000 h

dual output models: > 340‘000 h

Electromagnetic compatibility (EMC), emissions

– Conducted input RI suppression EN 55022 class B, FCC Part 15 level B

– Harmonic current emissions IEC/EN 61000-3-2, class A

– Voltage flicker IEC/EN 61000-3-3

Electromagnets compatibility (EMC), immunity according EN 55024

– Electrostatic discharge ESD IEC/EN 61000-4-2, 4 kV / 8 kV, perf. criteria A

– RF field immunity IEC/EN 61000-4-3, 3 V/m, perf. criteria A

– Electrical fast transients/burst immunity IEC/EN 61000-4-4, ±2 kV, perf. criteria A

– Surge IEC/EN 61000-4-5, 1 kV / 2 kV, perf. criteria A

– Conducted RF IEC/EN 61000-4-6, 3 Vrms perf. criteria A

– Magnetic field IEC/EN 61000-4-8, 3 A/m perf. criteria A

– Voltage dip IEC/EN 61000-4-11

>95 %, perf. criteria A, 0.5 periods

30 %, perf. criteria A, 25 periods

>95 % perf. criteria B, 250 periods

Safety standards UL 60950-1, IEC/EN 60950-1

Safety approvals – UL/cUL www.ul.com → certifications → File: e188913

– CB report www.tracopower.com/overview/txl

Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf

– RoHS RoHS directive 2011/65/EU

Connection single output models: 5 pole terminal pitch (9.5mm with plastic cover)

dual output models: 6 pole terminal pitch (8.25mm with plastic cover)

Casing material nickel plated steel (chassis and cover)

Weight single output models: 0.34 kg

dual output models: 0.35 kg

TXL 035 Series, 35 Watt

www.tracopower.com

Page 4 of 4

Rev. November 15, 2018

Outline Dimensions

Pin Single Dual

1AC L AC L

2AC N AC N

3PE PE

4– Vout Common

5+ Vout Vout 1

6no con. Vout 2

Screw Terminal

(0.47)

(3.90)

23.555

(2.17)

(0.93)

(1.77)

774

(2.91)

(0.28)

17.5

(0.69)

(1.38)

(3.23)

2 x M3 THD

(bottom)

Top view

2x M3 THD

Dimensions in [mm], () = Inch

Tolerances ±0.5 (±0.02)