All published data at TCASE = 25°C unless otherwise indicated
ESD: Electrostatic discharge sensitive device—observe handling precautions!
PTFB193404F
Confidential, Limited Internal Distribution
Data Sheet – DRAFT ONLY 1 of 13 Rev. 04, 2011-02-07
Thermally-Enhanced High Power RF LDMOS FETs
340 W, 30 V, 1930 – 1990 MHz
Description
The PTFB193404F is a 340-watt LDMOS FET intended for use in multi-
standard cellular power amplifi er applications in the 1930 to 1990 MHz
frequency band. Features include input and output matching, high gain
and thermally-enhanced package with earless fl ange. Manufactured
with Infi neon’s advanced LDMOS process, this device provides excellent
thermal performance and superior reliability.
RF Characteristics
Two-carrier WCDMA Measurements (tested in Infi neon test fi xture)
VDD = 30 V, IDQ = 2.6 A, POUT = 80 W average, ƒ = 1990 MHz, 5 MHz spacing, 3GPP signal, channel bandwidth = 3.84 MHz,
peak/average = 7.5 dB @ 0.01% CCDF
Characteristic Symbol Min Typ Max Unit
Gain Gps 17.5 19 — dB
Drain Efficiency ηD 28.5 30 — %
Adjacent Channel Power Ratio ACPR — –31 –29 dBc
Features
• Broadband internal matching
• Wide video bandwidth
• Typical single-carrier WCDMA performance,
1990 MHz, 30 V
- Output power = 125 W
- Effi ciency = 31%
- Gain = 17 dB
- PAR = 5.5 dB @ 0.01% CCDF
- ACPR @ 5 MHz = –35 dBc
• Increased negative gate-source voltage range
for improved performance in Doherty amplifi ers
• Capable of handling 10:1 VSWR @ 30 V, 340 W
(CW) output power
• Integrated ESD protection
• Excellent thermal stability
• Pb-free and RoHS compliant
PTFB193404F
Package H-37275-6/2
Two-carrier WCDMA 3GPP Drive-up
VDD = 30 V, IDQ = 2.6 A, ƒ = 1990 MHz,
3GPP WCDMA signal, PAR = 8 dB,
10 MHz carrier spacing, BW = 3.84 MHz
-60
-55
-50
-45
-40
-35
-30
-25
-20
36 38 40 42 44 46 48 50 52
Average Output Power (dBm)
IMD, ACPR (dBc)
0
5
10
15
20
25
30
35
40
Drain Efficiency (%)
Efficiency
IMD Up
IMD Low
ACPR
Data Sheet – DRAFT ONLY 2 of 13 one Rev. 04, 2011-02-07
PTFB193404F
Confidential, Limited Internal Distribution
RF Characteristics (cont.)
Two-carrier WCDMA Characteristics (not subject to production test—verifi ed by design/characterization in Infi neon test fi xture)
VDD = 30 V, IDQ = 2.6 A, POUT = 80 W average, ƒ1 = 1980 MHz, ƒ2 = 1990 MHz, 3GPP signal, channel bandwidth = 3.84 MHz,
peak/average = 7.5 dB @ 0.01% CCDF
Characteristic Symbol Min Typ Max Unit
Gain Gps — 18 — dB
Drain Efficiency ηD — 29 — %
Intermodulation Distortion IMD — –33 — dBc
Two-tone Characteristics (not subject to production test—verifi ed by design/characterization in Infi neon test fi xture)
VDD = 30 V, IDQ = 2.6 A, POUT = 265 W PEP, ƒ = 1990 MHz, tone spacing = 1 MHz
Characteristic Symbol Min Typ Max Unit
Gain Gps — 19 — dB
Drain Efficiency ηD — 36 — %
Intermodulation Distortion IMD — 30 — dBc
DC Characteristics
Characteristic Conditions Symbol Min Typ Max Unit
Drain-Source Breakdown Voltage VGS = 0 V, IDS = 10 mA V(BR)DSS 65 — — V
Drain Leakage Current VDS = 28 V, VGS = 0 V IDSS — — 1.0 µA
V
DS = 63 V, VGS = 0 V IDSS — — 10.0 µA
On-State Resistance VGS = 10 V, VDS = 0.1 V RDS(on) — 0.05 — Ω
Operating Gate Voltage VDS = 30 V, IDQ = 2.6 A VGS 2.3 2.8 3.3 V
Gate Leakage Current VGS = 10 V, VDS = 0 V IGSS — — 1.0 µA
Maximum Ratings
Parameter Symbol Value Unit
Drain-Source Voltage VDSS 65 V
Gate-Source Voltage VGS –6 to +10 V
Junction Temperature TJ 200 °C
Storage Temperature Range TSTG –40 to +150 °C
Thermal Resistance (TCASE = 70°C) RθJC
0.2 °C/W
Data Sheet – DRAFT ONLY 3 of 13 two Rev. 04, 2011-02-07
PTFB193404F
Confidential, Limited Internal Distribution
Typical Performance (data taken in production test fi xture)
Ordering Information
Type and Version Package Outline Package Description Shipping
PTFB193404F V1 H-37275-6/2 Ceramic open-cavity, earless push-pull Tray
PTFB193404F V1 R250 H-37275-6/2 Ceramic open-cavity, earless push-pull Tape & reel, 250 pcs
Two-carrier WCDMA 3GPP Drive-up
VDD = 30 V, IDQ = 2.6 A,
3GPP WCDMA, PAR = 8 dB,
10 MHz carrier spacing, BW = 3.84 MHz
-60
-55
-50
-45
-40
-35
-30
-25
36 38 40 42 44 46 48 50 52
Average Output Power (dBm)
IMD (dBc)
1990
1960
1930
s uuu
IM3 Low
IM3 Up
Two-carrier WCDMA 3GPP Drive-up
VDD = 30 V, IDQ = 2.6 A, ƒ = 1990 MHz,
3GPP WCDMA signal, PAR = 8 dB,
10 MHz carrier spacing, BW = 3.84 MHz
16
17
18
19
20
36 38 40 42 44 46 48 50 52
Average Output Power (dBm)
Gain (dB)
0
5
10
15
20
25
30
35
40
Efficiency (%)
Gain
Efficiency
Data Sheet – DRAFT ONLY 4 of 13 one Rev. 04, 2011-02-07
PTFB193404F
Confidential, Limited Internal Distribution
Typical Performance (cont.)
Two-tone Broadband Performance
VDD = 30 V, IDQ = 2.6 A, POUT = 52 dBm
10
20
30
40
50
60
1840 1900 1960 2020 2080
Frequency (MHz)
-50
-40
-30
-20
-10
0
Gain
Efficiency
Return Loss
IMD3
Return Loss (dB) / IMD (dBc)
Gain (dB) / Efficiency (%)
Two-tone Drive-up
VDD = 30 V, IDQ = 2.6 A,,
ƒ1 = 1989 MHz, ƒ2 = 1990 MHz
-65
-55
-45
-35
-25
39 44 49 54
Output Power, PEP. (dBm)
IMD (dBc)
0
5
10
15
20
25
30
35
40
45
Efficiency (%)
Efficiency
Two-tone Drive-up
VDD = 30 V, IDQ = 2.6 A,
ƒ1 = 1989 MHz, ƒ2 = 1990 MHz
15
16
17
18
19
20
40 44 48 52 56
Output Power, PEP (dBm)
Gain (dB)
0
7
14
21
28
35
42
Efficiency (%)
Gain
Efficiency
Two-tone Drive-up (over temperature)
(POUT-max 3rd order IMD @ –30 dBc)
VDD = 30 V, IDQ = 2.6 A,
ƒ1 = 1959 MHz, ƒ2 = 1960 MHz
16
17
18
19
20
21
39 41 43 45 47 49 51 53 55 57
Output Power, PEP (dBm)
Gain (dB)
0
10
20
30
40
50
Efficiency (%)
+25C
+85C
–30C
Efficiency
Gain
Data Sheet – DRAFT ONLY 5 of 13 two Rev. 04, 2011-02-07
PTFB193404F
Confidential, Limited Internal Distribution
Typical Performance (cont.)
Two-tone Drive-up
at Selected Frequencies
VDD = 30 V, IDQ = 2.6 A, tone spacing = 1 MHz
-70
-60
-50
-40
-30
-20
39 41 43 45 47 49 51 53 55 57
Output Power, PEP (dBm)
IMD 3rd Order (dBc)
1990 MHz
1960 MHz
1930 MHz
Intermodulation Distortion
vs. Output Power
VDD = 30 V, IDQ = 2.6 A,
ƒ1 = 1989 MHz, ƒ2 = 1990 MHz
-75
-65
-55
-45
-35
-25
-15
39 41 43 45 47 49 51 53 55 57
Output Power, PEP (dBm)
IMD (dBc)
3rd Order
7th
5th
Intermodulation Distortion
vs. Tone Spacing
VDD = 30 V, IDQ = 2.6 A,
ƒ = 1930 MHz, POUT
= 317 W (PEP)
-70
-60
-50
-40
-30
-20
-10
1 10 100
Two Tone Spacing (MHz)
IMD (dBc)
IMD7
IMD5
IMD3
IMD Lower
IMD Upper
Single-carrier WCDMA Drive-up
VDD = 30 V, IDQ = 2.6 A, ƒ = 1990 MHz,
3GPP WCDMA signal, TM1 w/16 DPCH,
43% clipping, PAR = 7.5 dB, 3.84 MHz BW
-60
-50
-40
-30
-20
36 38 40 42 44 46 48 50 52
Average Output Power (dBm)
0
5
10
15
20
25
30
35
40
Drain Efficiency (%)
Adjacent Channel Power Ratio (dB)
Efficiency
ACPR Up
ACPR Low
Data Sheet – DRAFT ONLY 6 of 13 one Rev. 04, 2011-02-07
PTFB193404F
Confidential, Limited Internal Distribution
Typical Performance (cont.)
Single-carrier WCDMA Drive-up
VDD = 30 V, IDQ = 2.6 A, ƒ = 1990 MHz,
3GPP WCDMA signal,
PAR = 7.5 dB, BW = 3.84 MHz
2
6
10
14
18
22
26
36 38 40 42 44 46 48 50 52 54
Average Output Power (dBm)
-70
-50
-30
-10
10
30
50
Efficiency (%) / ACP (dBc)
ACP
PARC @ .01% CCDF
Efficiency
Gain
PARC (dB) / PARC Gain (dB)
Single-carrier WCDMA Drive-up
VDD = 30 V, IDQ = 2.6 A, ƒ = 1960 MHz,
3GPP WCDMA signal,
PAR = 7.5 dB, BW = 3.84 MHz
2
6
10
14
18
22
26
36 38 40 42 44 46 48 50 52 54
Average Output Power (dBm)
-70
-50
-30
-10
10
30
50
Efficiency (%) / ACP (dBc)
PARC (dB) / PARC Gain (dB)
ACP
PARC @ .01% CCDF
Efficiency
Gain
Single-carrier WCDMA Drive-up
VDD = 30 V, IDQ = 2.6 A, ƒ = 1930 MHz,
3GPP WCDMA signal,
PAR = 7.5 dB, BW = 3.84 MHz
0
4
8
12
16
20
36 38 40 42 44 46 48 50 52 54
Average Output Power (dBm)
-60
-40
-20
0
20
40
60
Efficiency (%) / ACP (dBc)
ACP
PARC @ .01% CCDF
Efficiency
Gain
PARC (dB) / PARC Gain (dB)
Single-carrier WCDMA Broadband
VDD = 30 V, IDQ = 2.6 A, POUT = 125 W,
3GPP WCDMA signal
-5
5
15
25
35
1840 1900 1960 2020 2080
Frequency (MHz)
-40
-30
-20
-10
0
Return Loss (dB) / ACP (dBc)
ACP
PARC @ .01% CCDF
Efficiency
Gain
Gain, PARC (dB) / Efficiency (%)
.
IRL
Data Sheet – DRAFT ONLY 7 of 13 two Rev. 04, 2011-02-07
PTFB193404F
Confidential, Limited Internal Distribution
Broadband Circuit Impedance (measurements taken on full part, both sides)
G
D
GS
D
PP-F ET compl ete_12-16- 2010
Z LoadZ Source
Frequency Z Source Ω Z Load Ω
MHz R jX R jX
1900 1.21 –3.60 0.73 –2.08
1930 1.21 –3.53 0.72 –2.01
1960 1.20 –3.47 0.72 –1.94
1990 1.20 –3.41 0.72 –1.87
2020 1.19 –3.35 0.72 –1.81
See next page for circuit information
Data Sheet – DRAFT ONLY 8 of 13 one Rev. 04, 2011-02-07
PTFB193404F
Confidential, Limited Internal Distribution
Reference Circuit
1
2
3
TL101
TL102
TL103 TL104 TL105
R802
1300 Ohm
R803
10 Ohm
R804
1200 Ohm C803
1000 pF
TL106
TL107
TL108
TL109
TL110
TL111 TL112 TL113 TL114 TL115
C101
1000000 pF
TL116
TL117 TL118 TL119
S
C
B
E
1
2
3
4
S2
12
3
S1 C801
1000000 pF
C802
10000000 pF
C102
1000000 pF R103
10 Ohm
L101
22 nH
L102
22 nH R104
10 Ohm
C103
10000000 pF
C104
10000000 pF
C105
18 pF
C106
18 pF
C107
1.5 pF
C804
10000000 pF
TL120
12
3
TL121
1
2
3
4
TL122
TL123
12
3
TL124
R801
100 Ohm
PORT
1
1
2
34
5
6
78
S3
RF_IN
b 1 93 4 0 4F - v 1 _ B D o ut _1 2 - 1 6 -2 0 10
Gate DUT
(Pin G1)
Gate DUT
(Pin G2)
Reference circuit input schematic for ƒ = 1990 MHz
ε
= 3.48
H = 20 mil
RO/RO4350B1
r
Data Sheet – DRAFT ONLY 9 of 13 two Rev. 04, 2011-02-07
PTFB193404F
Confidential, Limited Internal Distribution
Reference circuit output schematic for ƒ = 1990 MHz
Reference Circuit Assembly
DUT PTFB193404F
Test Fixture Part No. LTN/PTFB193404EF
PCB Rogers RO4350, 0.508 mm [0.020”] thick, 1 oz. copper, εr = 3.48copper
Find Gerber fi les for this test fi xture on the Infi neon Web site at http://www.infi neon.com/rfpower
Transmission Electrical
Dimensions: W, L (mm) Dimensions: W, L (mils)
Line Characteristics
Input
TL101 0.017 λ, 47.12 Ω W1 = 1.270, W2 = 1.270, W3 = 1.524 W1 = 50, W2 = 50, W3 = 60
TL102 0.039 λ, 47.12 Ω W = 1.270, L = 3.553 W = 50, L = 140
TL103 0.023 λ, 47.12 Ω W = 1.270, L = 2.055 W = 50, L = 81
TL104 0.013 λ, 47.12 Ω W = 1.270, L = 1.168 W = 50, L = 46
TL105 0.122 λ, 7.29 Ω W = 12.700, L = 10.160 W = 500, L = 400
TL106 W1 = 0.010, W2 = 1.168, Offset = 5.893 W1 = 10, W2 = 46, Offset = 232
TL107 W1 = 0.010, W2 = 1.168, Offset = –5.893 W1 = 10, W2 = 46, Offset = –232
TL108 0.007 λ, 34.08 Ω W = 2.032, L = 0.635 W = 80, L = 25
TL109 0.012 λ, 34.08 Ω W1 = 2.032, W2 = 1.034 W1 = 80, W2 = 41
TL110 0.055 λ, 53.60 Ω W = 1.034, L = 5.029 W = 41, L = 198
TL111 0.023 λ, 47.12 Ω W = 1.270, L = 2.111 W = 50, L = 83
TL112 0.017 λ, 47.12 Ω W = 1.270, L = 1.524 W = 50, L = 60
TL113 0.023 λ, 47.12 Ω W = 1.270, L = 2.055 W = 50, L = 81
table continued on page 9
Reference Circuit (cont.)
TL201
TL202
C201
0.8 pF
12
3
TL203 TL204
TL205
TL206
TL207 TL208
TL209
TL210
TL211
TL212
DCVS
V2
DCVS
V1
12
3
TL213
12
3
TL214
12
3
TL215
12
3
TL216
12
3
TL217 TL218
TL219
C202
100000000 pF
TL220
C203
100000000 pF
12
3
TL221
12
3
TL222
12
3
TL223
12
3
TL224
12
3
TL225 TL226
TL227
PORT
1
C204
18 pF
C205
18 pF
C206
4700000 pF
C207
4700000 pF
C208
4700000 pF
C209
4700000 pF
C210
10000000 pF
C211
10000000 pF
C212
10000000 pF
C213
10000000 pF
b193404F-v1_BD out_12- 16-2010
RF_OUT
V
DD
V
DD
Drain DUT
(Pin D1)
Drain DUT
(Pin D2)
Drain V
DD
(Pin V1)
Drain V
DD
(Pin V2)
ε
= 3.48
H = 20 mil
RO/RO4350B1
r
Data Sheet – DRAFT ONLY 10 of 13 one Rev. 04, 2011-02-07
PTFB193404F
Confidential, Limited Internal Distribution
Reference Circuit (cont.)
Transmission Electrical
Dimensions: W, L (mm) Dimensions: W, L (mils)
Line Characteristics
Input (cont.)
TL114 0.013 λ, 47.12 Ω W = 1.270, L = 1.168 W = 50, L = 46
TL115 0.122 λ, 7.29 Ω W = 12.700, L = 10.160 W = 500, L = 400
TL116 0.068 λ, 47.12 Ω W = 1.270, L = 6.170 W = 50, L = 243
TL117 0.032 λ, 47.12 Ω W = 1.270, L = 2.875 W = 50, L = 113
TL118 0.024 λ, 47.12 Ω W = 1.270, L = 2.131 W = 50, L = 84
TL119 0.017 λ, 47.12 Ω W = 1.270, L = 1.524 W = 50, L = 60
TL120 0.084 λ, 53.60 Ω W = 1.034, L = 7.671 W = 41, L = 302
TL121 0.014 λ, 53.60 Ω W1 = 1.034, W2 = 1.034, W3 = 1.27 W1 = 41, W2 = 41, W3 = 50
TL122 0.014 λ, 47.12 Ω W1 = 1.270, W2 = 1.270, W3 = 1.270, W1 = 50, W2 = 50, W3 = 50,
W4 = 1.270 W4 = 50
TL123 0.032 λ, 47.12 Ω W = 1.270, L = 2.896 W = 50, L = 114
TL124 0.014 λ, 47.12 Ω W1 = 1.270, W2 = 1.270, W3 = 1.27 W1 = 50, W2 = 50, W3 = 50
Output
TL201 W1 = 1.577, W2 = 1.046 W1 = 62, W2 = 41
TL202 W1 = 2.263, W2 = 1.577 W1 = 89, W2 = 62
TL203 0.009 λ, 31.48 Ω W1 = 2.263, W2 = 2.263, W3 = 0.762 W1 = 89, W2 = 89, W3 = 30
TL204 0.139 λ, 31.48 Ω W = 2.263, L = 12.299 W = 89, L = 484
TL205 W1 = 0.001, W2 = 13.335, Offset = –6.223 W1 = 1, W2 = 525, Offset = –245
TL206 W1 = 3.048, W2 = 2.263 W1 = 120, W2 = 89
TL207 0.009 λ, 25.04 Ω W = 3.048, L = 0.762 W = 120, L = 30
TL208 0.266 λ, 40.78 Ω W = 1.577, L = 23.889 W = 62, L = 941
TL209 0.160 λ, 6.97 Ω W = 13.335, L = 13.335 W = 525, L = 525
TL210 0.160 λ, 6.97 Ω W = 13.335, L = 13.335 W = 525, L = 525
TL211 0.151 λ, 53.21 Ω W = 1.046, L = 13.774 W = 41, L = 542
TL212 0.120 λ, 31.48 Ω W = 2.263, L = 10.617 W = 89, L = 418
TL213 0.024 λ, 19.85 Ω W1 = 4.064, W2 = 4.064, W3 = 2.032 W1 = 160, W2 = 160, W3 = 80
TL214 0.026 λ, 19.85 Ω W1 = 4.064, W2 = 4.064, W3 = 2.286 W1 = 160, W2 = 160, W3 = 90
TL215 0.026 λ, 19.85 Ω W1 = 4.064, W2 = 4.064, W3 = 2.286 W1 = 160, W2 = 160, W3 = 90
TL216 0.024 λ, 19.85 Ω W1 = 4.064, W2 = 4.064, W3 = 2.032 W1 = 160, W2 = 160, W3 = 80
TL217 0.026 λ, 19.85 Ω W1 = 4.064, W2 = 4.064, W3 = 2.286 W1 = 160, W2 = 160, W3 = 90
TL218 0.116 λ, 19.85 Ω W = 4.064, L = 10.008 W = 160, L = 394
TL219 0.052 λ, 19.85 Ω W = 4.064, L = 4.470 W = 160, L = 176
TL220 0.116 λ, 19.85 Ω W = 4.064, L = 10.008 W = 160, L = 394
TL221 0.024 λ, 19.85 Ω W1 = 4.064, W2 = 4.064, W3 = 2.032 W1 = 160, W2 = 160, W3 = 80
TL222 0.026 λ, 19.85 Ω W1 = 4.064, W2 = 4.064, W3 = 2.286 W1 = 160, W2 = 160, W3 = 90
TL223 0.026 λ, 19.85 Ω W1 = 4.064, W2 = 4.064, W3 = 2.286 W1 = 160, W2 = 160, W3 = 90
TL224 0.026 λ, 19.85 Ω W1 = 4.064, W2 = 4.064, W3 = 2.286 W1 = 160, W2 = 160, W3 = 90
TL225 0.024 λ, 19.85 Ω W1 = 4.064, W2 = 4.064, W3 = 2.032 W1 = 160, W2 = 160, W3 = 80
TL226 0.052 λ, 19.85 Ω W = 4.064, L = 4.470 W = 160, L = 176
TL227 W1 = 0.001, W2 = 13.335, Offset = 6.223 W1 = 1, W2 = 525, Offset = 245
Data Sheet – DRAFT ONLY 11 of 13 two Rev. 04, 2011-02-07
PTFB193404F
Confidential, Limited Internal Distribution
Reference circuit assembly diagram (not to scale)
Component ID Description Suggested Manufacturer P/N
C101, C102 Chip capacitor, 1 µF ATC NFM18PS105R0J30
C103, C104 Capacitor, 10 µF Digi-Key 490-4393-2-ND
C105, C106, Capacitor, 18 pF ATC 800A180JT
C204, C205
C107 Capacitor, 1.5 pF ATC 800A1R5BT
C801 Capacitor, 1 µF Digi-Key 490-4736-2-ND
C802, C804 Capacitor, 10 µF Digi-Key 587-1818-2-ND
C803 Chip capacitor, 1000 pF Digi-Key PCC1772CT-ND
L101, L102 Inductor, 22 nH Digi-Key 0805W220JT
R101, R102 Resistor, 1000 Ω Digi-Key P1.0KECT-ND
R103, R104 Resistor, 10 Ω Digi-Key P10GTR-ND
R801 Resistor, 100 Ω Digi-Key P100GTR-ND
R802 Resistor, 1300 Ω Digi-Key P1.3KGTR-ND
R803 Resistor, 10 Ω Digi-Key P101GTR-ND
R804 Resistor, 1200 Ω Digi-Key P1.2KGTR-ND
S1 Potentiometer Digi-Key 3224W-202ECT-ND
S2 Transistor Digi-Key BCP56-ND, BCP56
S3 Voltage regulator Digi-Key LM780L05ACM-ND, 7805
C201 Capacitor, 0.8 pF ATC 800A0R8BT
C202, C203 Capacitor, 100 µF Digi-Key PCE4442TR-ND
C206, C207, Capacitor, 4.7 µF Digi-Key 490-1864-2-ND
C208, C209
C210, C211, Capacitor, 10 µF Digi-Key 587-1818-2-ND
C212, C213
b193404f-v1_CD_12-16-2010
C209
RF_OUTRF_IN
C207
C210
C203
C202
C212 C208
C102
C101
C211
C201
C204
R104
R802
C105
C801
C104
C206
C106
C107
R803
C803
C103
C205
L102
C104
R801
R103
C802
R804
S2
.020
V
DD
V
DD
S3
PTFB193404_IN_01 PTFB193404_OUT_01
+
S1
C213
L101
.020 (60)RO4350,
.020 (63)
V
DD
RO4350,
Reference Circuit (cont.)
Data Sheet – DRAFT ONLY 12 of 13 one Rev. 04, 2011-02-07
PTFB193404F
Confidential, Limited Internal Distribution
Pinout Diagram
Package H-37275-6/2
Pin Description
V1 VDD device 1
V2 VDD device 2
D1 Drain device 1
D2 Drain device 2
G1 Gate device 1
G2 Gate device 2
S Source (fl ange)
V2
S =
1G2
D1 D2
V1
-37275-6-2_pd_07-22-2010
See next page for package outline specifi cations
Data Sheet – DRAFT ONLY 13 of 13 two Rev. 04, 2011-02-07
PTFB193404F
Confidential, Limited Internal Distribution
Package Outline Specifi cations
Package H-37275-6/2
Diagram Notes—unless otherwise specifi ed:
1. Interpret dimensions and tolerances per ASME Y14.5M-1994.
2. Primary dimensions are mm. Alternate dimensions are inches.
3. All tolerances ± 0.127 [.005] unless specifi ed otherwise.
4. Pins: D1, D2 - drain, devices 1 & 2; G1, G2 - gate, devices 1 & 2;
V1, V2 - VDD, devices 1 & 2; S - source (fl ange).
5. Lead thickness: 0.127 ±0.051 [.005 ±.002].
6. Gold plating thickness: 1.14 ± 0.38 micron [45 ± 15 microinch].
Find the latest and most complete information about products and packaging at the Infi neon Internet page
http://www.infi neon.com/rfpower
V1
G1 G2
D2D1 V2
32.258
[1.270]
1.626
[0.064]
10.160
[.400]
4X 11.684
[.460]
2X 45° X 1.19
[45° X .047]
2X 1.143
[.045]
16.612±.500
[.654±.020]
9.398
[.370]
C
L
13.716
[.540]
9.144
[.360]
2X 3.175
[.125]
2X 30°
31.750
[1.250]
2X 2.032
[.080]
REF
2.134
[.084] SPH
3.226±0.508
[.127±.020]
31.242±0.280
[1.230±.011] 4.585+0.250
-0.127
[.180 +.010
-.005 ]
S
4X R0.508 +.381
-.127
[R.020+.015
-.005 ]C
LC
L
C
L
C
L
h- 37275- 6-2_ po _07-21- 2010
Data Sheet – DRAFT ONLY 14 of 13 Rev. 04, 2011-02-07
PTFB193404F V1
Confi dential, Limited Internal Distribution
Revision History: 2011-01-24 Data Sheet
Previous Version: 2010-12-16, Data Sheet
Page Subjects (major changes since last revision)
1, 2 RF tables revised for clarity.
We Listen to Your Comments
Any information within this document that you feel is wrong, unclear or missing at all?
Your feedback will help us to continuously improve the quality of this document.
Please send your proposal (including a reference to this document) to:
highpowerRF@infi neon.com
To request other information, contact us at:
+1 877 465 3667 (1-877-GO-LDMOS) USA
or +1 408 776 0600 International
Edition 2011-01-24
Published by
Infi neon Technologies AG
81726 Munich, Germany
© 2010 Infi neon Technologies AG
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of conditions or
characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information
regarding the application of the device, Infi neon Technologies hereby disclaims any and all warranties and liabilities of any
kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party.
Information
For further information on technology, delivery terms and conditions and prices, please contact the nearest
Infi neon Technologies Offi ce (www.infi neon.com/rfpower).
Warnings
Due to technical requirements, components may contain dangerous substances. For information on the types in question,
please contact the nearest Infi neon Technologies Offi ce.
Infi neon Technologies components may be used in life-support devices or systems only with the express written approval of
Infi neon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support
device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended
to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is
reasonable to assume that the health of the user or other persons may be endangered.