P01xxxA (R) SENSITIVE SCR FEATURES n n IT(RMS) = 0.8A VDRM / VRRM= 200V to 600V DESCRIPTION High performance planar technology. These parts are intended for general purpose applications where low gate sensitivity is required. TO92 ABSOLUTE MAXIMUM RATINGS Symbol Parameter Value Unit IT(RMS) RMS on-state current (180 conduction angle) TI= 55C 0.8 A IT(AV) Mean on-state current (180 conduction angle) TI= 55C 0.5 A ITSM Non repetitive surge peak on-state current (Tj initial = 25C ) tp = 8.3 ms 8 A tp = 10 ms 7 tp = 10 ms 0.24 A 2s I 2t I2t Value for fusing dI/dt Critical rate of rise of on-state current IG = 10 mA diG /dt = 0.1 A/s. 30 A/s Tstg Tj Storage temperature range Operating junction temperature range - 40, + 150 - 40, + 125 C 260 C Tl Maximum lead temperature for soldering during 10s (at 2.0mm from case) Voltage Symbol VDRM VRRM Parameter Repetitive peak off-state voltage Tj = 125C RGK = 1K March 2000 - Ed: 1A Unit B D M 200 400 600 V 1/3 P01xxxA THERMAL RESISTANCES Symbol Parameter Value Unit Rth(j-a) Junction to ambient 150 C/W Rth(j-l) Junction to leads for DC 80 C/W GATE CHARACTERISTICS (maximum values) PG (AV)= 0.1 W PGM = 2 W (tp = 20 s) IGM = 1 A (tp = 20 s) ELECTRICAL CHARACTERISTICS SENSITIVITY Symbol Unit Test Conditions 09 IGT VD=12V (DC) RL=140 Tj= 25C 02 MIN MAX 1 200 11 18 15 4 0.5 15 25 5 50 A VGT VD=12V (DC) RL=140 Tj= 25C MAX 0.8 V VGD VD=VDRM RL=3.3k RGK = 1 K Tj= 125C MIN 0.1 V IRG =10A Tj= 25C MIN 8 V tgd VD=VDRM ITM= 3 x IT(AV) dIG/dt = 0.1A/s IG = 10mA Tj= 25C TYP 0.5 s IH IT= 50mA RGK = 1 K Tj= 25C MAX 5 7 mA IL IG=1mA RGK = 1 K Tj= 25C MAX 6 8 mA VTM ITM= 1.6A tp= 380s Tj= 25C MAX 1.95 V IDRM IRRM VD = VDRM RGK = 1 K VR = VRRM Tj= 25C MAX B/D: 1 - M: 10 A 100 A dV/dt VD = 67%VDRM RGK = 1 K Tj= 125C VGRM tq 2/3 Tj= 125C MAX ITM= 3 x IT(AV) VR=35V dI/dt=10A/s tp=100s dV/dt=10V/s VD= 67%VDRM RGK = 1 K MIN Tj= 125C MAX 50 75 80 200 75 100 V/s s P01xxxA Fig.1 : Maximum average power dissipation versus average on-state current. Fig.2 : Correlation between maximum average power dissipation and maximum allowable temperature (Tamb and Ttab). P (W) Ttab (oC) P (W) 1 1 360 -95 O 0.8 -100 0.8 Rth(j-a) DC 0.6 = 180 = 120 0.4 = 90 = 60 -105 o 0.6 -110 o 0.4 o -115 o 0.2 0.2 = 30 o 0 0 0.1 0.2 0.3 -120 IT(AV)(A) 0.4 0.5 0.6 0.7 o Tamb ( C) 0 0 0.8 Fig.3 : Average on-state current versus tab temperature. 20 40 60 80 100 -125 140 120 Fig.4 : Relative variation of thermal impedance junction to ambient versus pulse duration. Zth(j-a)/Rth(j-a) I T(AV) (A) 1.00 1 DC 0.8 0.6 0.10 o = 180 0.4 Standard foot print , e(Cu)=35 m 0.2 Tamb (oC) 0 0 10 20 30 40 50 60 70 80 tp(s) 90 100 110 120 130 Fig.5 : Relative variation of gate trigger current and holding current versus junction temperature. Igt[Tj] o Igt[Tj=25 C] 0.01 1E-3 1E-2 1E-1 1E+0 1E+1 1E+2 5E+2 Fig.6 : Non repetitive surge peak on-state current versus number of cycles. ITSM(A) Ih[Tj] Ih[Tj=25 o C] 8 o 10.0 9.0 7 8.0 6 Tj initial = 25 C 7.0 5 6.0 Igt 5.0 4 4.0 3 3.0 2.0 2 Ih 1 1.0 0.0 -40 Number of cycles Tj(oC) -20 0 20 40 60 80 100 120 140 0 1 10 100 1,000 3/5 P01xxxA Fig.7 : Non repetitive surge peak on-state current for a sinusoidal pulse with width : tp 10ms, and corresponding value of I2t. Fig.8 : On-state characteristics (maximum values). I TSM (A). I2 t (A2 s) I TM (A) 10 100 Tj initial o 25 C Tj initial = 25oC I TSM 10 Tj max 1 Tj max Vto =0.95V Rt =0.600 1 I2 t VTM (V) tp(ms) 0.1 1 10 0.1 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 Fig.9 : Relative variation of holding current versus gate-cathode resistance (typical values). Ih(Rgk) Ih(Rgk=1k ) 5.0 Tj=25 o C 1.0 Rgk( ) 0.1 1.0E+ 00 1.0E+01 1.0E+ 02 1. 0E+ 03 1.0E+04 1.0E+ 05 1. 0E+ 06 ORDERING INFORMATION P 01 02 A A SCR Planar Package A = TO92 Sensitivity Current 4/5 1AA3 5xLx Voltage Bulk or Tape & Reel 5.5 P01xxxA PACKAGE MECHANICAL DATA TO92 DIMENSIONS REF. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A A 1.35 0.053 a B B C 4.70 C F D E 0.185 2.54 0.100 D 4.40 0.173 E 12.70 0.500 F 3.70 0.146 a 0.45 0.017 MARKING Type Marking P0109BA P0109BA P0109DA P0109DA P0109MA P0109MA P0102BA P0102BA P0102DA P0102DA P0102MA P0102MA P0111BA P0111BA P0111DA P0111DA P0111MA P0111MA P0115BA P0115BA P0115DA P0115DA P0115MA P0115MA P0118BA P0118BA P0118DA P0118DA P0118MA P0118MA Package Weight Delivery mode Base qty TO92 0.2g Bulk Tape & Reel 2500 2000 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics (c) 2000 STMicroelectronics - Printed in Italy - All rights reserved. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A. http://www.st.com 5/5