ENDURA BG845G
MicroATX Intel® 845GV PCI Embedded Motherboard
FEATURE SUMMARY
478-pin PGA ZIF socket for
Intel® Pentium 4 and Celeron
processors at 400MHz and
533MHz FSB
Support for mobile Pentium 4
processor
Intel® 845GV chipset (845G
option)
Up to 2GB DDR SDRAM
Intel® Extreme Graphics
ADD Slot (845GV
ADD and 4X AGP Slot (845G
only)
Single or dual Ethernet (option)
10/100 or Gigabit Ethernet
(option)
AC97 audio
TCPA security (option)
3 PCI slots
System management and fan
control
Power management
Watchdog timer
Phoenix ServerBIOS*
6 USB 2.0 ports
2 serial ports
Parallel port
PS/2 keyboard and mouse ports
(also via internal headers
13 GPIO lines (supports an LCD
character display)
9.6" x 9.6" microATX
ROHS 6 Compliant
ADVANCED PERFORMANCE
The RadiSys BG845G expands the Endura motherboard family to deliver a high performance embedded platform
based on the latest Intel® Pentium* 4 and Celeron* processors. Featuring the Intel 845GV chipset, the BG845G
delivers cutting edge technology and versatility to meet the needs of a broad range of embedded applications
such as test and measurement, industrial automation, medical, transaction terminals, gaming and Enterprise
applications.
Platform enhancements feature integrated Intel Extreme Graphics, greater bandwidth for high performance
processors with a bus speed of 533MHz, reduced power consumption with support for mobile Pentium 4
processors, large memory support with up to 2GB of DDR SDRAM, integrated high speed USB 2.0 at 40 times the
speed of USB 1.1 and support for a variety of flat panel and TV-out display interfaces using ADD cards. RadiSys
has also designed a companion LVDS ADD card for use with LVDS flat panel displays.
EMBEDDED FEATURES
To address the needs of specific embedded applications, the BG845G also features a build option for dual
Ethernet ports using either 10/100 or Gigabit Ethernet controllers for the latest high bandwidth communications
applications.
Support for riser cards facilitates the use in low profile chassis and internal connectors, such as keyboard and
mouse, enables direct connections to the motherboard inside chassis such as used in test and measurement
equipment. A build option for a write-protected BIOS, a BIOS socket and an ITP port lends the board well for use
in gaming applications which are subject to regulatory control. A TCPA compliant module also enables the
BG845G to be used as a secure computing platform, particularly important for transaction terminals.
EMBEDDED SUPPORT
Unlike commercial motherboards, RadiSys is able to meet the true needs of the embedded marketplace offering a
superior level of support demanded by embedded equipment manufacturers. This includes long life products (up
to 5 years), revision control, product life cycle management, engineering support and high quality design and
manufacture. The combined benefits all serve to offer customers a low cost of ownership with Endura
motherboards.
ENDURA BG845G DATA SHEET | © 2006 RadiSys Corporation | ID: 12-12-2006 3 | Page 1 of 4
Endura BG845G Specifications
FEATURE FUNCTION DESCRIPTION
Processor Socket 478-pin µPGA socket for Pentium 4 processors
ITP port (build option)
FSB 400MHz and 533MHz
Chipset - Intel® 845GV with ICH4 (long life embedded chipset) or Intel® 845GV with ICH4 (option for 4X AGP support, but not embedded)
Memory Sockets Two 184-pin DIMM sockets for DDR SDRAM (PC1600 and PC2100)
Capacity Maximum 2GB
ECC/Parity Not supported
Video VGA Integrated Intel® Extreme graphics with 48MB dynamic memory
Resolution 1600 x 1200 pixels with 32-bit color support
ADD AGP Digital Display card support with dual DVO channels for TMDS (PanelLink)
LVDS and TV-out interfaces
AGP 4X 1.5V cards supported with 845G chipset only
AGP ADD cards supported with 845GV and 845G chipsets
Audio AC97 Analog Devices AD1885 CODEC for AC97 v2.1
Rear Connectors Mic, Line Out and Line In (dependent on SKU) jacks on rear panel
On-board
Connectors
CD In, AUX In, Line Out ATAPI connectors on-board
Network Controllers Single or dual Intel® 82551ER controllers for 10/100 Ethernet
Single or dual Intel® 82540EM controllers for Gigabit Ethernet
IEEE 802.3 10Base-T, 100Base-TX, 1000Base-T compatible
Rear Connectors Two RJ45 rear panel connectors each with two LEDs to indicate line activity, link integrity and line speed with on-board header to connect to external
duplicate LEDs
Remote/Wake-up Remote boot and wake-up supported by 82540EM controller
IDE Devices Two Ultra ATA/100 interfaces via 40-way boxed header
Drive Types Supports ATAPI, LS120 and ZIP drives
Floppy Types Supports standard 3.5" and 3-mode floppy drives
Mechanical Dimensions 9.6" x 9.6", 4-layer PCB, microATX compliant
I/O VGA Via 15-way D-type
Parallel Port 25-pin D-type supporting bi-directional, EPP and ECP modes
Serial Ports COM1 on 9-pin D-type, COM2, via 10-way header
USB 4 rear panel USB 2.0 ports (also supports 1.1), 2 USB 2.0 ports on internal headers
Keyboard & Mouse Swappable PS/2 connectors, on-board header connectors
Front Panel Connectors for power control and status, Reset, IDE activity, LED, speaker and intrude detect
GPIO 13 GPIO lines via header (also supports an LCD character display)
Expansion Slots PCI 3 dedicated bus master 32-bit PCI 2.2 slots
Riser Support PCI riser extension on Slot 2 , multi-slot riser support on Slots 2, 3 and 4
System
Management
Monitoring Voltage, temperature and fans
Automatic CPU fan speed control (O/S independent)
Anti-tamper security
Watchdog Watchdog timer
SMBus connector
Security - TCPA compliant TPM module
Power
Management
- PCI PME, ACPI 1.0b, APM 1.2
Power Supply Type Support for hard- and soft- switched power supplies
Power
Consumption
91W with a 2.8GHz Pentium 4 and 57W with a 1.7GHz Pentium 4-M with 1GB SDRAM, measured running Windows* 2000 power stress software
Battery - Lithium coin cell (5 years operating life typical)
BIOS Type Based on Phoenix ServerBIOS 3.0
Special Features Customizable defaults, customer logo, silent boot, QuickBoot, automatic configuration, Universal Console Redirection
Drivers Operating Systems Windows 2000, NTe, XP, XPe, Linux, Microware OS-9, others on request
Safety
Compliance
- Evaluated in accordance with UL60950, EN60950 and IEC60950
EMC
Compliance
- Evaluated in accordance with EN55022, EN55024 and FCC Part 15 Class B
Environment Operating
Temperature
0°C to 55°C
ENDURA BG845G DATA SHEET | © 2006 RadiSys Corporation | ID: 12-12-2006 3 | Page 2 of 4
Storage
Temperature
-40°C to 85°C
Relative Humidity 5% to 95% non-condensing
ENDURA BG845G DATA SHEET | © 2006 RadiSys Corporation | ID: 12-12-2006 3 | Page 3 of 4
Ordering Information
Toll-Free: 800-950-0044
Phone: 503-615-1100
Support: 866-385-6167
Call for pricing and availability. Refer to the order codes below.
DESCRIPTION
The following base configurations are available with embedded
Pentium 4, Celeron and mobile Pentium 4 processors.
BG845GV uATX with single !0/100 Ethernet, RoHS
PRODUCT CODE: BGGV1L03-0-0
BG845GV uATX with single !0/100 Ethernet, 2.4GHz Pentium 4 and
fansink, RoHS
PRODUCT CODE: BGGV1L03-P24-0
BG845GV uATX with dual 10/100 Ethernet, RoHS
PRODUCT CODE: BGGV2L03-0-0
I/O shield for single Ethernet, RoHS
PRODUCT CODE: ATX-L BG IOSHLD
I/O shield for dual Ethernet, RoHS
PRODUCT CODE: ATX-2L BG IOSHLD
Contact Information
www.radisys.com
info@radisys.com
Channels and other locations
Corporate Headquarters
5445 NE Dawson Creek Dr.
Hillsboro, OR 97124 USA
Phone: 503-615-1100
Fax: 503-615-1121
Toll-Free: 800-950-0044
Support: 866-385-6167
EMEA: +49 811 555457-0
China: 86.21.50804062
2006 RadiSys Corporation. RadiSys is a registered trademark of RadiSys Corporation. Convedia, Microware and
OS-9 are registered trademarks of RadiSys Corporation. Promentum, and Procelerant are trademarks of
RadiSys Corporation. *All other trademarks are the properties of their respective owners. All specifications within
this document are subject to change without notice.
ENDURA BG845G DATA SHEET | © 2006 RadiSys Corporation | ID: 12-12-2006 3 | Page 4 of 4