ARTESYN MODULAR HIGH POWER SYSTEM Up to 24000 Watts iHP12 Designed for a wide range of medical, industrial, lighting/ horticulture and semiconductor applications, Advanced Energy's iHP configurable precision power system provides accuracy, resolution and stability as either a programmable voltage or current source. It provides up to 24 kW in 3 kW increments and can be configured for up to 8 outputs using a wide variety of plug-in modules that address a large range of voltages and currents. Safety approvals secured by Advanced Energy eliminate the need for an isolation transformer in medical equipment. The iHP power system also has industrial safety approvals, including compliance to the SEMI F47 standard for semiconductor processing equipment. The iHP power system offers developers either an analog or digital interface to their system supporting standard communications protocols, while a software graphical user interface (GUI) allows for easy configuration and user Dashboard creation. For Horticulture customers, detailed scheduling and control software is available. For non-medical applications, a smaller and lighter rack is now available using the same plug-in modules. SPECIAL FEATURES Versatile input configurable to: 5 years manufacturer's warranty * Low line 180-264 Vac single phase and 3-phase Multi output intelligent and modular high power system Standard 19" rack Outputs parallel up to 1600 A Outputs series up to 1000 V 100% digital control Outputs program as voltage or current source * High line 342-528 Vac 3-phase * High line 540-660 Vac 3-phase (iHP24C) Medical Safety Approved on iHP12 and iHP24, not on iHP24S or iHP24C Analog Interface either 0-5 V or 0-10 V for both current and voltage. Compatible with, but not limited to Priva, Argus, TrollMaster and Hortimax controllers, In lighting applications Note 1: Digital Ethernet UDP, RS485, CAN or Ethernet TC/IP with PowerPro Connect Module option. Command protocol is patterned to PMBus specification using a proprietary transaction protocol. iHP24 DATA SHEET Total Power: Up to 24 KW per 3U rack. Up to 144 KW in an 18U Cabinet Input Voltage iHP12, iHP24 and iHP24S: 180-264 Vac 342-528 Vac Single or 3-Phase for iHP12 3-Phase for iHP24 and iHP24S iHP24C: 540-660 Vac 3-Phase for iHP24C # of Outputs: Up to 8 Font: Minion Bold for VS Minion italic for i ; size for each is the same Created on Mac Color: "i" 100% Blue, 50% Magenta, 0% Yellow, 0% Black "VS" - 100% Black Flexible digital control interfaces (Note 1) Air cooled Semi F47 compliance (except for iHP24S) Field upgradeable firmware Programmable slew rate Fast current slew rate up to 200 Hz Active power factor correction User defined command profiles Very low THD compared to LED Drivers when used in lighting applications (c)2021 Advanced Energy Industries, Inc. iHP SAFETY SAFETY FOR ALL MODELS (except for iHP24S and iHP24C models) CB Certificate and Report UL 62368-1 SAFETY FOR CANADIAN MODEL iHP24C3A ONLY CSA C22.2 No. 62368-1 CE LVD (EN62368-1 + RoHS) UL60950-1 with UL62368-1 EN62368-1 CSA C22.2 No 62368-1 EN60601-1 SAFETY FOR iHP SHORT RACK iHPS24H3A & iHPS24L3A IEC60601-1 st UL 60601-1 1 Edition; ANSI/AAMI ES60601-1 (2005 + C1:09 + A2:10) "3rd Ed" UL 62368-1 Listed CAN/CSA-C22.2 No. 60601-1 (2008) CSA 62368-1 Listed IEC60601 UL/cUL listed to UL 508 and CSA C22.2 No. 107.1-01, CSA to CSA C22.2 No. 107.1-01 EN 62368-1 IEC 62368-1 CE (LVD+RoHS), EN 62368-1 IHP24 ELECTRICAL SPECIFICATIONS Input Parameter Input range Number of phases 19" Rack 24 KW strapped as 3-phase 380/480 Vac Nominal (iHP24H3A/iHP24SH3A) 19" Rack 24 KW strapped as 3-phase 208/240 Vac Nominal (iHP24L3A/iHP24SL3A) 19" Rack 24 KW strapped as 3-phase 600 Vac Nominal (iHP24C3A) 342 Vac to 528 Vac (Nominal rating 380/480 Vac) 187.5 Vac to 264 Vac (Nominal rating 208/240 Vac) 540 Vac to 660 Vac (Nominal rating 600 Vac) 3-phase (Wye or Delta) 4 wire total (3-phase and 1 protective earth ground) Frequency 47-63 Hz Phase detection Max current/phase Undervoltage detection Loss of phase will inhibit unit off. Housekeeping/comms must continue with phase loss. 51 A @ 342 Vac 40 A @ 432 Vac 84 A @ 187.5 Vac 2.5 x Max input current Power factor > 0.98 @ full load and nominal line Harmonic distortion Input leakage current THD < 13%, PWHD < 22% (refer to EN 61000-3-12) Designed to meet SEMI F47-0706, 53, 58, S14 at nominal input voltages (Non "S" models don't apply) < 2.5 mA (Note for fixed condition 3rd edition leakage = 5 mA) Power switch Front panel power switch provided Input protection Internal fuse (not user serviceable) Input overvoltage protection Up to 115% of nominal input shall not damage unit Phase imbalance 5% Rack parallel Efficiency Standby voltage Standby regulation Standby max current 2advancedenergy.com 29 A @ 312 Vac Nominal input locked on at turn-on. Undervoltage shutdown at 15% below nominal. Turn-on at 12% below nominal. Not to interfere with SEMI F47 specs. Current inrush Line interruption 3-phase Wye 5 wire total (3-phases, neutral and protective earth ground) Up to 6 racks (144 KW) 94.1% @ 3P 380 Vac 50% Load 94.8% @ 3P 480 Vac 50% Load 94.2% @ 3P 208 Vac 50% Load 94.7% @ 3P 240 Vac 50% Load 5V 4.75 - 5.25 V 1A > 90% @ 3P 600 Vac full load iHP TOTAL HARMONIC DISTORTION COMPARISON % Load 600 W Driver iHP24H3A and iHP24SH3A 50% 14.00% 2.78% 75% 13.10% 1.16% 100% 10.70% 0.80% Notes: 1. 600 W driver data is taken from published datasheet. 2. iHP24H3A model data was captured at a nominal input of 480V 3-Phase at room ambient. 3. The input voltage of 277VAC is the single phase equivalent used when operating on 2 phases of a 480V 3-Phase utility service. SAFETY TABLE Model Number Model Code Module Nominal Voltage 73-936-0012 SL 48 V 73-936-0024 SQ 73-936-0048 SW 73-936-0080 S8 80 V Safety Compliance Maximum Total Voltage Allowed Medical 2MOPP* 300 V Medical2MOOP**,ITE 400 V Medical 2MOPP 600 V 800 V 73-936-0125 S1 Medical 2MOOP 73-936-0200 SA Medical 2MOOP 800 V 73-936-0250 S2 ITE 1000 V Note: * -2MOPP or 2 x MOPP (Means of Patient Protection) ** -2MOOP or 2 x MOOP (Means of Operator Protection advancedenergy.com 3 iHP IHP12 ELECTRICAL SPECIFICATIONS Input Parameter 19" Rack 12 KW strapped as 1-phase Type: 19" Rack 12 KW strapped as 200/220/230/240 Vac Nominal 3-phase 200/208/240 Vac Nominal (iHP12L1A) (iHP12L3A) Input range 180 Vac to 264 Vac (Nominal rating 200/220/230/240 Vac) Number of phases 180 Vac to 264 Vac (Nominal rating 200/208/240 Vac) 1-phase 3-wire total (2-phase and 1 protective earth ground) 342 Vac to 528 Vac (Nominal rating 380/480 Vac) 3-phase (Wye or Delta) 4-wire total (3-phase and 1 protective earth ground) Frequency 47-63 Hz Phase detection Loss of phase will inhibit unit off. Housekeeping/comms must continue with phase loss. NA Max current/phase 75 A @ 180 Vac 23 A @ 342 Vac 19 A @ 432 Vac 44 A @ 180 Vac Nominal input locked on at turn-on. Undervoltage shutdown at 15% below nominal. Turn-on at 12% below nominal. Not to interfere with SEMI F47 specs. Undervoltage detection Current inrush 2.5 x Max input current Power factor > 0.99 @ full load and nominal line Harmonic distortion > 0.98 @ full load and nominal line THD < 3.5%, PWHD < 22% (refer to EN 61000-3-12) Line interruption Designed to meet SEMI F47-0706, 53, 58, S14 at nominal input voltages Input leakage current < 1.25 mA Power switch <2.5 mA Front panel power switch provided Input protection Internal fuse (not user serviceable) Input overvoltage protection Up to 115% of nominal input shall not damage unit Phase imbalance NA 5% Rack parallel Efficiency Type: 19" Rack 12 KW strapped as 3-phase 380/480 Vac Nominal (iHP12H3A) 5% Up to 6 racks (72 KW) > 91% @ 1P 240 Vac full load > 90% @ 1P 208 Vac/200 Vac full load > 91% @ 3P 240 Vac full load > 90% @ 3P 208 Vac/200 Vac full load Standby voltage > 90% @ 3P 380 Vac full load > 91% @ 3P 480 Vac full load 5V Standby regulation 4.75 - 5.25 V Standby max current 1A EMC/IMMUNITY EMC ALL MODELS (except Canadian model iHP24C3A) ESD EN61000-4-2 (IEC1000-4-2) Fast Transients EN61000-4-4 (IEC1000-4-4) Surge Immunity EN61000-4-5 (IEC1000-4-5) Conducted Immunity EN61000-4-6 (IEC1000-4-6) Radiated Immunity EN61000-4-3 (IEC1000-4-3) Power Frequency Magnetic Field EN61000-4-8 Voltage Dips, Short Interruptions and Voltage Variations EN 61000-4-34 Conducted Emission EN55011, FCC CFR 47, Part 15, Subpart B Radiated Emission EN55011, FCC CFR 47, Part 15, Subpart B 4advancedenergy.com iHP EMC/IMMUNITY (CONTINUED) EMC CANADIAN MODEL iHP24C3A ONLY ESD IEC 61000-4-2 Level 4 Criteria A, Air discharge 15kV, Contact Discharge 8kV Fast Transients IEC 61000-4-4 Level 3 Criteria A 2kV Surge Immunity IEC 61000-4-5 Level 3 Criteria A, Common Mode 2kV, Differential Mode 1Kv Conducted Immunity IEC 61000-4-6 Level 3 Criteria A; 150kHz-80MHz, 10Vrms Radiated Immunity IEC 61000-4-3 Level 3 Criteria A; 80MHz-1GHz, 10V/M, 80% Modulation (1KHz) Power Frequency Magnetic Field IEC 61000-4-8 Criteria A; 30A/Meter Voltage Dips, Short Interruptions and Voltage Variations IEC 61000-4-11 100% dip, 1 cycle (20ms), Self Recoverable (Hold UP only 14mS on Short Rack and Liquid Cooled Conducted Emission EN55011, FCC CFR 47, Part 15, Subpart B Radiated Emission EN55011, FCC CFR 47, Part 15, Subpart B ALL MODELS (except Canadian model iHP24C3A, iHPS24H3A & iHPS24L3A) Category Radiated Emissions Conducted Emissions Standard Frequency Level / Limits PSU Performance Criteria1 EN 55011/CISPR11 30M -1GHz Class A 5dB Margin FCC CFR 47, Part 15, Subpart B 30M-1GHz >1GHz (see standard) Class A 5dB Margin EN 55011/CISPR11 150k-30MHz Class A 5dB Margin EN 61000-3-12 See standard See standard Voltage Fluctuations2 EN 61000-3-11 See standard See standard Radiated Immunity EN 61000-4-3 Power Line Harmonics 2 10 V/meter A ESD EN 61000-4-2 80M-2GHz 8 KV contact, 15 KV Air A Electrical Fast Transient EN 61000-4-4 +/- 4 KV A 2KV DM, 4KV CM A EN 61000-4-5 Surge AC Conducted Susceptibility IEEE C62.41 EN 61000-4-6 EN 61000-4-34 SEMI F47 Voltage Dips and Sags2 2KV DM, 2KV CM A 6 KV, CM & DM Fail Safe 150 KHz - 80 MHz 10Vrms A >95% reduction for 10mS A >30% reduction for 500mS A >95% reduction for 500mS C 20% reduction for 5000ms A 30% reduction for 500ms A 50% reduction for 200ms A 60% reduction for 200ms B Notes: 1 Performance Criteria as defined by EN 300 386 V1.3.3 2 Applies to AC power supplies only. Short Rack and Short Rack inside Liquid Cooled rack do not meet 1 cycle hold-up 3 24KW load conducted EMI and 12KW load radiated EMI tests using 48V modules only. 3KW load comparative test for other module variants is ok. advancedenergy.com 5 iHP iHP SHORT RACK (iHPS24H3A & iHPS24L3A) Category Radiated Emissions Standard Frequency Level / Limits PSU Performance Criteria1 EN 55011/CISPR11 30M -1GHz Class A - FCC CFR 47, Part 15, Subpart B 30M-1GHz >1GHz (see standard) - Class A - Conducted Emissions EN 55011/CISPR11 150k-30MHz Class A Power Line Harmonics2 EN 61000-3-12 See standard See standard Voltage Fluctuations2 EN 61000-3-11 See standard See standard Radiated Immunity EN 61000-4-3 80M-2GHz 10 V/meter A 8 KV contact, ESD EN 61000-4-2 Electrical Fast Transient EN 61000-4-4 +/- 4 KV A EN 61000-4-5 2KV DM, 4KV CM A Surge AC Voltage Dips and Sags 2KV DM, 2KV CM A 6 KV, CM & DM Fail Safe 150 KHz - 80 MHz 10Vrms A IEEE C62.41 Conducted Immunity EN 61000-4-6 2 EN 61000-4-34 >95% reduction for 0.5 Cycle A 100% reduction for 0.5 Cycle (45deg phase angle) A 100% reduction for 1 Cycle (0deg phase angle) C 30% reduction for 25/30 Cycles 30% reduction for 25/30 Cycles3 (0deg phase angle) IEC 61000-4-8 3 C 250/300 Cycles C 100% reduction for 250/300 Cycles 4 C See standard See standard Notes: 1 Performance criteria of EN61000-4-X standards as defined by EN55024 2 Applies to AC power supplies only. 3 24KW load conducted EMI and 12KW load radiated EMI tests using 48V modules only. 3KW load comparative test for other module variants is ok. 4 25 cycles for 50Hz test, 30cycles for 60 Hz test 5 250 cycles for 50Hz test, 300cycles for 60 Hz test 6advancedenergy.com C 4 >95% reduction for Power Frequency Magnetic Field A 15 KV Air iHP OUTPUT - GENERAL SPECS Parameter MODULE CODE SL SQ ST SW S8 S1 SA S2 # Outputs 1 1 1 1 1 1 1 1 Nominal O/P (V) 12.0 V 24.0 V 32.0 V 48.0 V 80.0 V 125.0 V 200.0 V 250.0 V Max Power (W) 2400 W 2880 W 2880 W 3000 W 3000 W 3000 W 3000 W 3000 W 0.0 A - 200 A 0.0 A - 120 A 0.0 A - 90 A 0.0 A -24 A 0.0 A - 15.0 A 0.0 A -12 A 32.5 39.0 39.0 40.6 39 40.6 O/P Current Range (A) Power Density (W/cu-in) 0.0 A - 62.5 A 0.0 A - 37.5 A 40.6 Module Input Voltage Module Operating Temp 40.6 400 V -0 C to +65 C; Baseplate Temp TBD Series Operation 250 V modules can be connected in series up to 800 V for Medical and 1000 V for ITE Parallel Operation Up to 8 modules can be paralleled in 1 rack, with up to 6 racks connected in parallel. Single Wire Parallel connection will be provided as part of configuration Parameter MODULE CODE # Outputs TW T3 1 1 Nominal O/P (V) 50 V 300 V Max Power (W) 12000 W 12000 W O/P Current Range (A) 0 -270 A 0 -50 A TBA TBA Power Density (W/cu-in) Module Input Voltage Module Operating Temp 395V 5V 0C to +65C Series Operation No series operation offering Parallel Operation Up to two (2) modules can be paralleled in one (1) rack, with up to six (6) racks connected in parallel. Single Wire Parallel connection will be provided as part of configuration. advancedenergy.com 7 iHP OUTPUT - MODULE IN VOLTAGE SOURCE MODE Voltage Source MODULE CODE SL SQ ST SW S8 S1 SA S2 Nominal Output (V) 12 24 32 48 80 125 200 250 Setting Range (V) 0.6 V - 14.4 V 1.2 V - 28.8 V 1.6 V - 38.4 V 2.4 V - 57.6 V 4.0 V - 96.0 V 6.25 V - 150.0 V 10.0 V - 240.0 V 12.5 V - 300.0 V Low Frequency RMS Ripple (mV) 24 48 64 96 Line Regulation (mV) 12 24 32 Load Regulation (mV) 24 48 64 P-P Ripple (mV) 60 120 160 Drift (Temp Stability) 160 250 500 48 80 125 200 250 96 160 250 400 500 240 400 625 1250 1250 0.05% of Iout Rated over 8 hours, after 30 minute warm up, constant Line, Load and Temp Temp Coefficient 200 (PPM/C) Pgm Accuracy (mV) Pgm Resolution (mV) Meas Accuracy (mV) Meas Resolution Transient Response Current Sense Method 500 Digital: 0.1% of Nominal Output Voltage; Analog: 1.0% of Nominal Output Voltage SL=TBD; SQ=1; SW=2; S8=8; S1=6; S2=21 0.2% + 0.2% of Nominal Output Voltage SL=TBD; SQ=1; SW=2; S8=8; S1=6; S2=21 Max 5.0% deviation from current set point must recover within 1mS for a 50% step load. Internal Shunt; External Shunt can be used for better temperature stability. Voltage Source MODULE CODE TW T3 Nominal Output (V) 50 300 2.5 -60 15.0 -360 100 600 Line Regulation (mV) 50 300 Load Regulation (mV) 100 600 P-P Ripple (mV) 250 1500 Setting Range (V) Low Frequency RMS Ripple (mV) Drift (Temp Stability) 0.05% of Vout rated over 8 hours, constant line and load. Temp Coefficient (PPM/C) Pgm Accuracy (mV) 200 Digital: 0.1% of Nominal Output Voltage / Analog: 1.0% of Nominal Output Voltage Pgm Resolution (mV) 2 Meas Accuracy (mV) 0.2% of Set Output + 0.2% of Nominal Output Voltage Meas Resolution Transient Response Current Sense Method 8advancedenergy.com TBA TBA Recovery time of 1mS (See Section 5.4.2 for the transient conditions) Internal Shunt iHP OUTPUT - MODULE IN CURRENT SOURCE MODE Current Source - Programmable load compensation available for resistive and inductive loads; capacitive load applications; and LED drive applications MODULE CODE Nominal Output (V) Setting Range (A) SL SQ 12 24 0.0 A - 200 A 0.0 A - 120 A ST 32 0.0 A - 90 A SW S8 48 80 0.0 A - 62.5 A 0.0 A - 37.5 A S1 SA S2 125 200 250 0.0 A - 24 A 0.0 A - 15 A 0.0 A - 12 A 12 RMS Ripple (mA) 200 120 90 62.5 37.5 24 15 Line Regulation (mA) 200 120 90 125 93.75 48 50 24 Load Regulation (mA) 800 480 375 250 150 96 56 48 P-P Ripple (mA) N/A Drift (Temp Stability) 0.05% of Iout Rated over 8 hours, after 30 minute warm up, constant Line, Load and Temp Temp Co-efficient SL, SQ = 300 PPM; All other modules are 200 PPM. Temp Co-efficient at rack level is [Temp Co-efficient (module level)] + [4500 PPM of Iout-max] (PPM/C) Pgm Accuracy (A) Pgm Resolution (mA) 0.7% digital, 1.3% analog of rated output max 79.2 26.4 13.2 Meas Accuracy Meas Resolution 10 5.2 2.6 2.6 5.2 2.6 2.6 0.7% + 0.7% of Rated Output Max 79.2 Transient Response 26.4 13.2 10 0-63% output current change in 7.5 mSec, residual value 1%, settling time 35 mSec Current Sense Method Internal Shunt / External Shunt Current Source -Programmable load compensation available for resistive and inductive loads; capacitive load applications; and LED drive applications MODULE CODE TW T3 Nominal Output (V) 50 300 Setting Range (A) 0 -270 0 -50 270 50 *Line Regulation (mA) 270 100 *Load Regulation (mA) 1200 200 Pgm Resolution (mA) 20 TBA Meas Resolution (mA) TBA TBA RMS Ripple (mA) *Pgm Accuracy (A) Digital: 0.7% of Rated Output Max / Analog: 1.3% of Rated Output Max (1% to 100% O/P Current adjustability) 0.7% + 0.7% of Rated Output Max *Meas Accuracy *Drift (Temp Stability) 0.05% of Iout-max over 8 hours, constant line and load. Temp Coefficient - Module Level (PPM of Iout-max / C) 300 300 Temp Coefficient - Rack Level [Temp Coefficient (module level)] + [4500ppm of Iout-max] Current Overshoot-Undershoot +/- 5% of Iout-max (See Section 5.4.2 for the transient conditions) **Transient Response Time Current Sense Method Recovery time of 35mS (See Section 5.4.2 for the transient conditions) Internal Shunt advancedenergy.com 9 iHP ENVIRONMENTAL SPECIFICATIONS Operating Conditions ALL MODELS (Unless Otherwise Specified) Operating Temperature 0 C to +50 C at 100% rated load. Storage Temperature -40 C to +85 C. For Liquid Cooled models, liquid must be drained before storage Operating Humidity 20% - 90% non condensing Storage Humidity 10% - 95% non condensing Operating Altitude Up to 9,842 feet above sea level (3,000 meters) Storage Altitude Up to 30,000 feet above sea level (9,144 meters) Vibration Operating Sinusoidal Vibration MIL-STD-810G Method 528 Procedure I (Type 1): NEBS Office Vibration Environment, Alternate Procedure Operating Random Vibration: IPC-9592B Class 1 Non-Operating Vibration (Packaged): IPC-9592B Class 1; MIL-STD-810G, Method 514.6, Procedure 1, Category 7, Table 514.6C-VII General Exposure Shock MIL-STD-810G Method 516.6 Procedures I, II, IV, VI Shipping and Handling NSTA for <100 lbs; MIL-STD-2073-1 >100 lbs Cooling and Audible Noise <65 dBA with 80% load @ 30 C at nominal input voltage with Smart Fan algorithm to be optimized based on module and rack thermal sensors. When modules are inhibited via software control, the fan speed is reduced to idle and acoustic noise is <46 dBA. With modules off via front panel switch fans are at idle for 1 min, and off for 9 min. Ingress Protection Fan Cooled = IP20 Pollution Degree 2 RoHS Compliance Yes 10advancedenergy.com iHP ORDERING INFORMATION CASE CODE iHP**XYACase Decoder iHP**XYA ** = Case Power MODULE CODES PARALLEL/SERIES CASE CODE -XYZ* (x4/x8) -XX-** Module Decoder XVZ X = Output Type 12 = 12 KW 19" Rack S = Single O/P (1-Slot) 24 = 24 KW 19" Rack 24S = 24KW 19" Rack Short X = Voltage Range T = Single O/P (3-Slot) First Digit Second Digit 0 = None 0 = None 1 = Slot 1&2 P = Parallel 2 = Slot 2&3 S = Series 3 = Slot 3&4 1 = Combo 2 P/S V = Nominal Voltage 4 = Slot 4&5 2 = Combo 2 S/P L = Low Range*180-264 A = 200V 5 = Slot 5&6 3 = Combo 3 P/P/S H = High Range 342-528 B = Future 6 = Slot 6&7 4 = Combo 3 P/S/P C = Canadian 540-660 C = Future 7 = Slot 7&8 5 = Combo 3 P/S/S Y = Input Phase D = Future 8 = Slot 1,2&3 6 = Combo 3 S/P/P 1 = Single Phase L = 12 V 9 = Slot 1,2,3&4 7 = Combo 3 S/P/S 3 = 3-Phase Q = 24 V A = Slot 1,2,3,4&5 8 = Combo 3 S/S/P T = 32 V B = Slot 1,2,3,4,5&6 9 = Combo 4 P/P/P/S W = 48 V C = Slot 1,2,3,4,5,6&7 A = Combo 4 P/P/S/P 8 = 80 V D = Slot 1,2,3,4,5,6,7&8 B = Combo 4 P/P/S/S 1 = 125 V E = Slot 1&2; 3&4 C = Combo 4 P/S/P/P Blank = Full control 2 = 250 V F = Slot 1&2; 3&4; 5&6 D = Combo 4 P/S/P/S 1-9 = Future 3 = 300 V (12 KW ONLY) G = Slot 1&2; 3&4; 5&6; 7&8 E = Combo 4 P/S/S/P 5 = 500 V (12 KW ONLY) H = Slot 1,2&3; 4&5 F = Combo 4 P/S/S/S Z = Cooling A = Air Cooled A = Accessory Options Z=Mode Blank = Standard K = Slot 1,2&3; 4,5&6 P = Precision CONF CODE MOD CODE -X -XXX Special Configuration Factory Assigned Blank = Standard Configuration Alpha Character = Special Set-up H = Combo 4 S/P/P/S L = Slot 1,2&3; 4,5&6; 7&8 J = Combo 4 S/P/S/P M = Slot 1,2,3&4; 5&6 K = Combo 4 S/P/S/S N = Slot 1,2,3&4; 5&6; 7&8 L = Combo 4 S/S/P/P P = Slot 1,2,3&4; 5,6&7 M = Combo 4 S/S/P/S R = Slot 1,2,3&4; 5,6,7&8 N = Combo 4 S/S/S/P S = Slot 1,2,3,4&5; 6&7 T = Slot 1,2,3,4&5; 6,7&8 U = Slot 1,2,3,4,5&6; 7&8 Z=Special Defined by MOD Code -** is allowed for secondary series/parallel code 1 = Groups 1&2 P = Parallel 8 = Groups 1,2&3 S = Series 9 = Groups 1,2,3&4 1 = Combo 2 P/S E = Groups 1&2; 3&4 2 = Combo 2 S/P *Lowest possible input for the 24 kW version is 187.5 Vac advancedenergy.com 11 iHP ORDERING INFORMATION (CONTINUED) MODEL NUMBER SHORTCUT For repeated like modules in parallel or series, instead of listing all the same modules separated by a "-", you can simply list the module once and then follow by the number of times it repeats enclosed in parenthesis. For example: iHP24H3A-SW-SW-SW-SW-SW-SW-S8-S8-00 would become: iHP24H3A-SW(6)-S8(2)-00 12advancedenergy.com iHP PART NUMBER INFORMATION Rack/Module Description Status RACK Model Weight 73-959-0001 iHP24 36.0 KG 73-958-0001 19" 12KW Case High Line 3-Phase Air (iHP12H3A) Released 73-959-0001Z iHP24C 35.0 KG 73-958-0001L 19" 12KW Case Low Line 3-Phase Air (iHP12L3A) Released 73-958-0001 iHP12 22.2 KG 73-958-0001S 19" 12KW Case Low Line 1-Phase Air (iHP12L1A) Released 73-936-0012 Module 3KW 2.2 KG 73-959-0001 19" 24KW Case High Line 3-Phase Air (iHP24H3A) Released All other 3KW Module 2.0 KG 73-959-0001L 19" 24KW Case Low Line 3-Phase Air (iHP24L3A) Released 73-938-0050 Module 12KW 5.95 KG 73-959-0001Z 19" 24KW Case 600V Canadian 3-Ph Y Air (iHP24C3A) Released 73-969-0001 Short rack 28.5 KG 73-969-0001 19" 24KW SHORT Case High Line 3-Phase Air (iHP24SH3A) Coming Soon 73-938-0300 Module 12KW 300V 5.1 KG 73-969-0001L 19" 24KW SHORT Case Low Line 3-Phase Air (iHP24SL3A) Coming Soon 73-938-0050 Module 12KW 50V 6 KG 73-936-0024 Module 3KW 24V 2.2 KG 73-936-0200 Module 3KW 200V 2 KG 3KW MODULES 73-936-0012 12V 2400W Output Module (SL) Released 73-936-0024 24V 2880W Output Module (SQ) Released 73-936-0032 32V 3000W Output Module (ST) Released 73-936-0048 48V 3000W Output Module (SW) Released 73-936-0080 80V 3000W Output Module (S8) Released 73-936-0125 125V 3000W Output Module (S1) Released 73-936-0200 200V 3000W Output Module (SA) Released 73-936-0250 250V 3000W Output Module (S2) Released 12KW MODULES 73-938-0050 50V 12000W Output Module (TW) Released 73-938-0300 300V 12000W Output Module (T3) Coming Soon 73-778-000A PPCM (PowerPro Connect Module) Kit Released 73-778-001 3-Phase Low Line Config Kit Released 73-778-002 1 Phase Low Line Config Kit Released 73-778-003 Module Accessory Kit Released 73-778-004 2X Parallel Module Accessory Kit Released 73-778-005 3X Parallel Module Accessory Kit Released 73-778-006 4X Parallel Module Accessory Kit Released 73-778-007 5X Parallel Module Accessory Kit Released 73-778-008 6X Parallel Module Accessory Kit Released 73-778-009 7X Parallel Module Accessory Kit Released 73-778-010 8X Parallel Module Accessory Kit Released 73-778-011 Initial Series Module Accessory Kit Released 73-778-012 Subsequent Series Module Accessory Kit Released 73-778-013 CAN/RS485 Terminator Released 73-778-016 3-Phase High Line Config Kit Released 73-778-022 Blank Panel 73-778-022 Released 73-778-023 iHP12 Isocomm board Released 73-778-024 iHP24 Isocomm board Released ACCESSORIES 73-778-026 iHP24 Cover Kit Released 73-778-027 iHP12 Cover Kit Released 73-778-029 iHP 8X IPROG Cable Assembly Released 73-778-030 iHP 4X IPROG Cable Assembly Released advancedenergy.com 13 iHP CASE SPECS - OUTLINE DETAIL Front Panel Standard Markings (Standard for both 12 KW and 24 KW) Input and Comms Standard Markings View of iHP24L/H and iHP12L/H shown on top, iHP24C shown on bottom. Comms interface is horizontal on the iHP12L/H. See mechanical drawings for more details. Condition POWER LED OUTPUT LED SYSTEM STATUS LED No AC OFF OFF OFF ISOCOM Start-Up Boot Load BLINKING GREEN OFF OFF SLEEP Mode (ON/OFF switch) AMBER OFF OFF Global Inhibit SOLID GREEN BLINKING GREEN OFF AC GOOD SOLID GREEN X X AC FAULT (OV, UV) SOLID RED OFF SOLID RED Output GOOD SOLID GREEN SOLID GREEN SOLID GREEN Auto-recoverable Fault (OTP) SOLID GREEN OFF SOLID AMBER Latching Fault (OVP, UVP) or Internal Fault SOLID GREEN OFF SOLID RED FAN FAIL SOLID GREEN OFF BLINKING RED BOOTLOADING X OFF BLINKING AMBER 14advancedenergy.com iHP MODULE INTERFACE DETAIL (SAME FOR BOTH "S" AND "T" MODULES) Module J1 Signals Pin # Function Function Pin # 5 4-20mA_IPROG SYS_M_FAULT# 10 4 0-5V_IPROG SYS_M_ENABLE# 9 3 0-10V_IPROG SYS_RTN 8 2 0-5V_VPROG SYS_M_INHIBIT 7 1 0-10V_VPROG 4-20mA_VPROG 6 Pin # Function Function Pin # Module J2 Signals 6 NOT CONNECTED ISHARE 12 5 IMON VMON 11 4 D_RTN ISHARE 10 3 EXT_ISENSE+ EXT_ISENSE- 9 2 D_RTN V_SNS- 8 1 V_SNS+ D_RTN 7 J1 mating housing Molex Micro-fit MPN: 43025-1000 J2 mating housing Molex Micro-fit MPN: 43025-1200 Crimp Terminal AWG 20-24 Crimp Terminal Molex MPN: 43030-0002 advancedenergy.com 15 iHP IHP24 SERIES - MECHANICAL DRAWINGS INPUT CONNECTOR TERMINAL BLOCK DETAIL VIEW ROTATED 90 SCALE 1:2 MFR: PHOENIX CONTACT MPN: UWV 25 CONDUCTOR RANGE 10 - 2 AWG TIGHTENING TORQUE 4.5 N-m MAX INPUT CONNECTOR +0.10 (28) (3) (752.28) AC-INPUT RATING LABEL 21 (50.5) 2 -0.25 NOTE: 1. WEIGHT: RACK STANDALONE, 35.4 Kg RACK WITH 8 MODULES, 52.9 Kg 2. REFER TO PRODUCT LABELS FOR SAFETY INFORMATION AND SPECIAL INSTRUCTIONS. 3. REFER TO PRODUCT SPECIFICATION FOR OPERATIONAL ENVIRONMENT. 4. DO NOT OBSTRUCT INLET AND OUTLETS. 447 0.8 EARTH GROUND STUD M6 TIGHTEN TO 6.5 N-m MAX. 21 (28) AIRFLOW DIRECTION +0.10 2 -0.25 COMMS CONNECTORS USB PORT (43) MODULE AREA 706.8 0.8 514.34 (45.48) 415.92 317.49 219.07 120.64 RS485/CAN 6PIN RJ11 66.25 5X 8PIN RJ45 (68) ETHERNET 132.5 0.5 STANDARD TTL DSUB 9 (18.4) SIDE PANEL MOUNTING (BOTH SIDE) METRIC M5, 6mm MAX SCREW PENETRATION TOTAL 10 LOCATIONS 4.5 N-m MAX TIGHTENING TORQUE 482.6 0.8 460 MAIN LABEL 57.15 132.5 0.5 6.8 4X COMMS CONNECTORS DETAIL VIEW ROTATED 90 SCALE 1:2 37.7 (13.4) (15.3) 24KW AIR COOLED SHORT RACK MECHANICAL OUTLINE (602) (38) Note: Weight : Short rack (73-969-0001) - 28.5Kg (645.5) 16advancedenergy.com iHP IHP12 SERIES - MECHANICAL DRAWINGS INPUT CONNECTOR TERMINAL BLOCK DETAIL VIEW TOTATED 90 SCALE: NTS MFR: PHOENIX CONTACT MPN: UWV 25 CONDUCTOR RANGE: 10 - 2 AWG TOGHTENING TORQUE: 4.5 N-m MAX +0.10 2.05 -0.25 (502.68) INPUT CONNECTOR (28) (3) AC-INPUT RATING LABEL (50.5) EARTH GROUND STUD M6 TIGHTEN TO 6.5 N-m MAX NOTE: 1. RACK WITH 4 MODULES, 30.3 Kg. 2. REFER TO PRODUCT LABELS FOR SAFETY INFORMATION AND SPECIAL INSTRUCTIONS. 3. REFER TO PRODUCT SPECIFICATION FOR OPERATIONAL ENVIRONMENT. 4. DO NOT OBSTRUCT INLET AND OUTLETS. COMMS CONNECTORS 447 0.8 AIRFLOW DIRECTION 456.2 (43) MODULE AREA 415.92 317.49 (45.48) 216.07 120.64 USB PORT 66.25(4X) ETHERNET 8PIN RJ45 RS485/SCAN 6PIN RJ11 SIDE PANEL MOUNTING (BOTH SIDE) METRIC M5. 6mm MAX SCREW PENETRATION TOTAL 8 LOCATIONS. 4.5 N-m MAX TIGHTENING TORQUE RS485/SCAN TTL DSUB 9 (18.4) MAIN LABEL 482.6 0.8 460 57.15 TTL (4X)6.8 ETHERNET (68) USB PORT 132.5 0.6 STANDARD 37.7 NNECTORS EW 13.4 15.8 advancedenergy.com 17 iHP IHP24C SERIES - MECHANICAL DRAWINGS 18advancedenergy.com iHP IHP MODULES - MECHANICAL DRAWINGS 255.1 (7.5) (4.5) 17.6 44 0.5 (2X)33.8 MOLEX 43045-1001 256.3 (2X)49.8 16.9 24 114 0.5 MOLEX 43045-1201 (2X)M3 (4X)M4 ) (2X 8.5 Note : Weight : 3 kW module 12V - 32V - 2.2Kg 3kW module 48 - 300V - 2.0Kg advancedenergy.com 19 iHP 12KW MODULES - MECHANICAL DRAWINGS Note : Weight : 1 2kW 300V module (73-938-0300) - 5.1Kg 12kW 50V module (73-938-0050) POWERPRO CONNECT MODULE Part number:73-778-000A The PowerPro Connect Module (purchased separately) can provide standard Ethernet interface via the internet to a cloud- and dashboardbased user-configurable GUI. 20advancedenergy.com ABOUT ADVANCED ENERGY Advanced Energy (AE) has devoted more than three decades to perfecting power for its global customers. AE designs and manufactures highly engineered, precision power conversion, measurement and control solutions for mission-critical applications and processes. Our products enable customer innovation in complex applications for a wide range of industries including semiconductor equipment, industrial, manufacturing, telecommunications, data center computing, and medical. With deep applications know-how and responsive service and support across the globe, we build collaborative partnerships to meet rapid technological developments, propel growth for our customers, and innovate the future of power. For international contact information, visit advancedenergy.com. powersales@aei.com (Sales Support) productsupport.ep@aei.com (Technical Support) +1 888 412 7832 Specifications are subject to change without notice. Not responsible for errors or omissions. (c)2021 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy(R), AE(R) and ArtesynTM are U.S. trademarks of Advanced Energy Industries, Inc. ENG-IHP-235-01 1.26