DESCRIPTION The LCZ Series Hall-effect Zero Speed Sensors provide a The stainless steel package is simple to install and adjust. It durable, cost-effective solution in most harsh environments. does not require rotational orientation. The sensor is available in 9,5 mm [3/8 in/0.375 in] and 15,9 mm [5/8 in/0.625 in] diameters, in both 50,8 mm [2.00 in] and 76,2 mm [3.00 in] lengths. FEATURES POTENTIAL APPLICATIONS Low cost Industrial process control Omni-directional sensor to target orientation Factory automation Digital output Rotary applications, such as: Small size - Pumps Low power consumption - Rollers - Mixers - Fan speed measurement - Transmission - Spindles - Gear reducer RPM - Process speed - Synchronization - Generator set - Compressor speed - Dyno testing Table 1. Sensor Specifications Characteristic Minimum Maximum Unit Condition Supply voltage 4.5 26 Vdc - Supply current - 20 mA load = infinity, Vcc = 26 Reverse polarity 30 - Vdc - Output sinking - 20 mA 0.4 V max. short circuit protected Voltage low - 0.4 V at 30 mA max. sink Voltage high - 30 Vdc - Duty cycle 20 80 % within operating gap Operating frequency 0 15 k Hz no orientation required Output signal rise/fall time - 4.0 s 880 Ohm, 20 pF 200 - Vac <2 mA leakage - - - at gaps below curve (see Figure 3) Dielectric strength Operation gap Output impedance Operating temperature range Storage temperature 4.7 5.3 kOhm - -40 [-40] 125 [257] C [F] - - 125 [257] C [F] - Sealing IP68 Shock Vibration Housing material Weight 50 G, 11 ms - 15 G, 10 Hz to 2000 Hz - stainless steel - see Figure 1 - Figure 1. Mounting Dimensions (For reference only: mm/[in]) 1753 [69] A 7,9 [0.31] C 25,4 [1.00] THREE CONDUCTOR 24 AWG CABLE B 2 Catalog Listing Thread Length (A) LCZ260 LCZ260-30 LCZ460 LCZ460-30 50,8 mm [2.00 in] 76,2 mm [3.00 in] 50,8 mm [2.00 in] 76,2 mm [3.00 in] www.honeywell.com/sensing Thread Type (B) 3/8-24UNF-2A 3/8-24UNF-2A 5/8-18UNF-2A 5/8-18UNF-2A Flats (C) 7,9 mm [0.312 in] 7,9 mm [0.312 in] 14,3 mm [0.562 in] 14,3 mm [0.562 in] Max. Mounting Torque 4,1 [36 in lb] 4,1 [36 in lb] 27,1 N m [240 in lb] 27,1 N m [240 in lb] Weight 59,5 g [2.1 oz] 68,0 g [2.4 oz] 104,9 [3.7 oz] 136,1 g [4.8 oz] Figure 2. Equivalent Electrical Schematic Red Power Supply (+) 5 kOhm White Signal Output Shield (NC) Black Common Sensor Figure 3. Air Gap Performance Curve 0.160 0.140 0.120 Air Gap (in) 0.100 0.080 0.060 0.040 0.020 0 4 8 12 16 20 24 28 32 36 40 44 48 Gear Pitch Figure 4. Target Motion Honeywell Sensing and Control 3 Order Guide Catalog Listing LCZ260 LCZ260-30 LCZ460 LCZ460-30 Description Hall-effect speed sensor, 3/8-24UNF-2A thread, 50,8 mm [2.00 in] length Hall-effect speed sensor, 3/8-24UNF-2A thread, 76,2 mm [3.00 in] length Hall-effect speed sensor, 5/8-18UNF-2A thread, 50,8 mm [2.00 in] length Hall-effect speed sensor, 5/8-18UNF-2A thread, 76,2 mm [3.00 in] length WARNING WARNING PERSONAL INJURY MISUSE OF DOCUMENTATION DO NOT USE these products as safety or emergency stop The information presented in this product sheet is for devices or in any other application where failure of the reference only. Do not use this document as a product product could result in personal injury. installation guide. Failure to comply with these instructions could result in Complete installation, operation, and maintenance death or serious injury. information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of death or serious injury. defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise SALES AND SERVICE by Honeywell in writing; please refer to your order Honeywell serves its customers through a worldwide network acknowledgement or consult your local sales office for specific of sales offices, representatives and distributors. For warranty details. If warranted goods are returned to Honeywell application assistance, current specifications, pricing or name during the period of coverage, Honeywell will repair or replace, of the nearest Authorized Distributor, contact your local sales at its option, without charge those items it finds defective. The office or: foregoing is buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of E-mail: info.sc@honeywell.com merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. Internet: www.honeywell.com/sensing Phone and Fax: While we provide application assistance personally, through Asia Pacific +65 6445-3033 Fax our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the +65 6355-2828 Europe +44 (0) 1698 481481 +44 (0) 1698 481676 Fax application. Latin America +1-305-883-8257 Fax Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. +1-305-805-8188 USA/Canada +1-800-537-6945 +1-815-235-6847 +1-815-235-6545 Fax Sensing and Control Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 www.honeywell.com/sensing 005886-3-EN September 2011 Copyright (c) 2011 Honeywell International Inc. All rights reserved.