CLASSIFICATION PRODUCT SPECIFICATION SUBJECT CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 1 of 55 DATE 11.06.2012 Specification for Production Applicant / Manufacturer Hardware Panasonic Industrial Devices Europe GmbH Zeppelinstrasse 19 21337 Luneburg Germany Applicant / Manufacturer Software Not applicable Software Version Not applicable Contents Approval for Mass Production Customer By purchase of any products described in this document the customer accepts the document's validity and declares their agreement and understanding of its contents and recommendations. Panasonic reserves the right to make changes as required without notification. HIGH FREQUENCY PRODUCTS DIVISION Module Business PANASONIC INDUSTRIAL DEVICES EUROPE GmbH APPROVED CHECKED DESIGNED CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 2 of 55 DATE 11.06.2012 TABLE OF CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Scope of this Document .................................................................................................. 5 1.1. New PAN1315A, PAN1325A ................................................................................. 5 Key Features................................................................................................................... 6 2.1. Software Block Diagram ........................................................................................ 6 Applications for the Module............................................................................................. 7 Description for the Module .............................................................................................. 7 Detailed Description ........................................................................................................ 8 5.1. Terminal Layout ..................................................................................................... 8 5.1.1. Terminal Layout PAN131x without antenna ................................................ 8 5.1.2. Terminal Layout PAN132x with antenna ..................................................... 9 5.2. Pin Description..................................................................................................... 10 5.3. Device Power Supply........................................................................................... 11 5.4. Clock Inputs ......................................................................................................... 12 Bluetooth Features........................................................................................................ 12 Block Diagram............................................................................................................... 13 Test Conditions ............................................................................................................. 14 General Device Requirements and Operation .............................................................. 14 9.1. Absolute Maximum Ratings ................................................................................. 14 9.2. Recommended Operating Conditions.................................................................. 15 9.3. Current Consumption........................................................................................... 15 9.4. General Electrical Characteristics........................................................................ 16 9.5. nSHUTD Requirements ....................................................................................... 16 9.6. External Digital Slow Clock Requirements (-20C to +70C) .............................. 16 Host Controller Interface ............................................................................................... 17 Audio/Voice Codec Interface......................................................................................... 18 11.1. PCM Hardware Interface ..................................................................................... 18 11.2. Data Format......................................................................................................... 18 11.3. Frame Idle Period ................................................................................................ 19 11.4. Clock-Edge Operation ......................................................................................... 20 11.5. Two-Channel PCM Bus Example ........................................................................ 20 11.6. Audio Encoding.................................................................................................... 20 11.7. Improved Algorithm For Lost Packets.................................................................. 21 11.8. Bluetooth/PCM Clock Mismatch Handling ........................................................... 21 11.9. Bluetooth Inter-IC Sound (I2S) ............................................................................ 21 11.10. Current Consumption for Different Bluetooth Scenarios .................................. 22 Bluetooth RF Performance............................................................................................ 22 Soldering Temperature-Time Profile (for reflow soldering) ........................................... 25 13.1. For lead solder..................................................................................................... 25 13.2. For leadfree solder............................................................................................... 26 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 3 of 55 DATE 11.06.2012 Module Dimension ........................................................................................................ 27 14.1. Module Dimensions PAN131X without Antenna.................................................. 27 14.2. Module Dimensions PAN132X with Antenna....................................................... 28 Footprint of the Module ................................................................................................. 29 15.1. Footprint PAN131x without antenna .................................................................... 29 15.2. Footprint PAN132x with antenna ......................................................................... 30 Labeling Drawing .......................................................................................................... 31 Mechanical Requirements............................................................................................. 31 Recommended Foot Pattern ......................................................................................... 32 18.1. recommended foot pattern PAN131x without antenna ........................................ 32 18.2. recommended foot pattern PAN132x with antenna ............................................. 33 Layout Recommandations with Antenna (PAn132x)..................................................... 34 Bluetooth LE (LOW ENERGY) PAN1316/26 ................................................................ 34 20.1. Network Topology................................................................................................ 34 20.2. module features ................................................................................................... 35 20.3. Current consumption for different LE scenarios .................................................. 36 ANT PAN1317/27.......................................................................................................... 36 21.1. Network topology ................................................................................................. 36 21.2. module features .................................................................................................. 37 21.3. ANT Current consumption ................................................................................... 37 Triple mode (BR/EDR + Bluetooth low energy + ANT) PAN1323................................ 38 22.1. Triple Mode Current consumption ....................................................................... 38 Development of Applications......................................................................................... 39 23.1. Tools to be needed .............................................................................................. 39 List of Profiles ............................................................................................................... 40 Reliability Tests ............................................................................................................. 40 Cautions ........................................................................................................................ 41 26.1. Design Notes ....................................................................................................... 41 26.2. Installation Notes ................................................................................................. 41 26.3. Usage Conditions Notes ...................................................................................... 42 26.4. Storage Notes...................................................................................................... 42 26.5. Safety Cautions ................................................................................................... 43 26.6. Other cautions ..................................................................................................... 43 Packaging ..................................................................................................................... 44 27.1. Packaging of PAN131x without antenna ............................................................. 44 27.2. Packaging for PAN132x with antenna ................................................................. 47 Ordering Information ..................................................................................................... 48 RoHS Declaration ......................................................................................................... 49 Data Sheet Status ......................................................................................................... 49 History for this Document.............................................................................................. 50 Related Documents....................................................................................................... 50 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification 33. 34. 35. 36. 37. PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 4 of 55 DATE 11.06.2012 General Information ...................................................................................................... 51 Regulatory Information.................................................................................................. 51 34.1. FCC Notice .......................................................................................................... 51 34.2. Caution ................................................................................................................ 52 34.3. Labeling Requirements........................................................................................ 52 34.4. Antenna Warning ................................................................................................. 52 34.5. Approved Antenna List ........................................................................................ 52 34.6. RF Exposure PAN13xx........................................................................................ 53 Industry Canada Certification........................................................................................ 53 European R&TTE Declaration of Conformity ................................................................ 53 Life Support Policy ........................................................................................................ 55 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification 1. PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 5 of 55 DATE 11.06.2012 SCOPE OF THIS DOCUMENT This product specification describes Panasonic's HCI, Class 1.5 , TI based, Bluetooth(R) 1 modules, series number 13xx. For detailed family overview that includes part numbers see Chapter 28, Ordering Information. Non-antenna versions will be refered to as PAN131x, versions with antenna will be refered to as PAN132x in this document. Fore information and features on Bluetooth Low Energy 4.0 refer to Chapter 19, for information on ANT refer to Chapter 21. 1.1. NEW PAN1315A, PAN1325A The PAN1315A/1325A Series is based on Texas Instruments' NEW CC2560A controller. A ROM update from Texas Instruments to the CC2560 IC has allowed Panasonic to improve PAN1315/1325 Series. The NEW PAN1315A/1325A Series Modules has increased power and system efficiency resulting from reduced initialization script size, start-up time and decreased system memory requirements. Compatibility: PAN1315, PAN1315A, PAN1316 and PAN1317 are 100% footprint compatible PAN1325, PAN1325A, PAN1326 and PAN1327 are 100% footprint compatible As an updated initialization script resident on the application microcontroller is required for modules based on the CC2560A, compatibility between the PAN1315/PAN1325 and PAN1315A/PAN1325A is dependant on the Bluetooth stack. Stacks are available that will operate with all PAN1315/1325 variations. BT-Stack solutions provided by software development partners are available for most processors, including linux based host systems.. For detailed family overview that includes part numbers see Chapter 28 Ordering Information. Contact your stack provider or local Panasonic sales company for currently available Bluetooth Profiles. 1 Bluetooth is a registered trademark of the Bluetooth Special Interest Group. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification 2. PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 6 of 55 DATE 11.06.2012 KEY FEATURES * * * * * * * * * * * * * * * * * * * * * 2.1. Bluetooth specification v2.1 + EDR (Enhanced Data Rate) Surface mount type 6.5(9.5 w. Ant.) x 9.0 x 1.8 mm Up to 10.5dBm Tx power (typical) with transmit power control High sensitivity (-93 dBm typ.) Texas Instrument's CC256X BlueLink 7.0 inside Fast Connection Setup Extended SCO Link Supports convenient direct connection to battery (2.2-4.8 V), or connect to DC/DC (1.7-1.98 V) for improved power efficiency Internal crystal oscillator (26MHz) Fully shielded for immunity Full Bluetooth data rate up to 2,178kbps asymmetric Support for Bluetooth power saving modes (Sniff, Hold) Support for very low-power modes (deep sleep and power down) Optional support for ultra-low-power mode. Standby with Battery-Backup PCM Interface Master / Slave supporting 13 or 16 bit linear, 8 bit -law or A-law Codecs and CVSD transcoders on up to 3 SCO channels Full 8- to 128-bit encryption UART, IC and PCM Interface IO operating voltage = 1.8 V nominal 3 Channel ADC and 1 Channel DAC Bluetooth profiles such as SPP, A2DP and others are available. Refer to Panasonic's RF module website for a listing of the most current releases. Manufactured in conformance with RoHS SOFTWARE BLOCK DIAGRAM Application Host Processor BD/EDR BLE ANT HCI HCI PAN13xx L2CAP RF Block PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification 3. PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 7 of 55 DATE 11.06.2012 APPLICATIONS FOR THE MODULE All Embedded Wireless Applications * * * * * * 4. Smart Phones Industrial Control Medical Scanners Wireless Sensors Low Power * * * * * * Cable Replacement Automotive Access Points Consumer Electronics Monitoring and Control Access Points DESCRIPTION FOR THE MODULE The PAN1315 and PAN1315A are short-range, Class 1 or 2, HCI modules for implementing Bluetooth functionality into various electronic devices. A block diagram can be found in Chapter 7. Communication between the module and the host controller is carried out via UART. New designs can be completed quickly by mating the PAN13xx series modules with Texas Instruments' MSP430BT5190 that contains Mindtree's EtherMind Bluetooth Protocol Stack and serial port profile, additional computing power can be achieved by choosing TI's Stellaris ARM7 controller that includes StoneStreet One's A2DP profile. Other BT profiles are available on custom development basis. Additional controllers are also supported by the PAN13xx series by using a TI/Panasonic software development partner to port the Bluetooth stack and profiles. Mindtree's Software Development Kit (SDK) is available on TI's website -- www.ti.com/connectivity.com Contact your local sales office for further details on additional options and services, by visiting www.panasonic.com/rfmodules or write an e-mail to wireless@eu.panasonic.com. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION PRODUCT SPECIFICATION SUBJECT CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification 5. PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 8 of 55 DATE 11.06.2012 DETAILED DESCRIPTION 5.1. TERMINAL LAYOUT 5.1.1. Terminal Layout PAN131x without antenna No Pin Name 1 2 3 4 5 6 7 GND TX_DBG HCI_CTS HCI_RTS HCI_RX HCI_TX AUD_FSYNC 8 SLOW_CLK_IN 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 NC MLDO_OUT CL1.5_LDO_IN GND RF GND MLDO_IN nSHUTD AUD_OUT AUD_IN AUD_CLK GND NC VDD_IO NC NC Pull at Reset PU PU PU PU PU PD Def. 2 Dir. I/O Type Description of Options (Common) Connect to Ground Logger output HCI UART clear-to-send. HCI UART request-to-send. HCI UART data receive HCI UART data transmit PCM frame synch. (NC if not used) Fail safe I 32.768-kHz clock in Fail safe IO O I Not connected Main LDO output (1.8 V nom.) PA LDO input Connect to Ground Bluetooth RF IO Connect to Ground Main LDO input Shutdown input (active low). PCM data output. (NC if not used) PCM data input. (NC if not used) PCM clock. (NC if not used) Connect to Ground EEPROM IC SDA (Internal) I/O power supply 1.8 V Nom EEPROM IC SCL (Internal) Not connected O I O I O IO 2 mA 8 mA 8 mA 8 mA 8 mA 4 mA IO PD PD PD PD 3 I I O I IO PI IO 4 mA 4 mA HY, 4 mA 4 Fail safe Fail safe Fail safe 2 I = input; O = output; IO = bidirectional; P = power; PU = pulled up; PD = pulled down 3 I/O Type: Digital I/O cells. HY = input hysteresis, current = typ. output current 4 No signals are allowed on the IO pins if no VDD_IO (Pin 22) power supplied, except pin 7, 8, 17-19. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION PRODUCT SPECIFICATION SUBJECT CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 9 of 55 DATE 11.06.2012 5.1.2. Terminal Layout PAN132x with antenna No Pin Name A B C D GND GND GND GND Pull at Reset Def. 5 Dir. I/O Type 6 Description of Options (Common) Connect to Ground Connect to Ground Connect to Ground Connect to Ground No 1-24 see above in Chapter 5.1.1. Except PIN 13 is not connected. For RF conducted measurements, either use the PAN1323ETU or de-solder the antenna and solder an antenna connector to the hot pin. 5 I = input; O = output; IO = bidirectional; P = power; PU = pulled up; PD = pulled down 6 I/O Type: Digital I/O cells. HY = input hysteresis, current = typ. output current PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification 5.2. PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 10 of 55 DATE 11.06.2012 PIN DESCRIPTION Pin Name No ESD (V) 7 Pull at Def. 8 Reset Dir. I/O Type 9 Description of Options Bluetooth IO SIGNALS HCI_RX 5 750 PU I 8 mA HCI UART data receive HCI_TX 6 750 PU O 8 mA HCI UART data transmit HCI_RTS 4 750 PU O 8 mA HCI UART request-to-send. HCI_CTS 3 750 PU I 8 mA HCI UART clear-to-send. AUD_FYSNC AUD_CLK AUD_IN AUD_OUT 7 19 18 17 500 500 500 500 PD PD PD PD IO IO I O 4 mA HY, 4 mS 4 mA 4 mA PCM frame synch PCM clock PCM data input PCM data output TX_DBG 2 1000 PU O 2 mA (NC if not used) (NC if not used) (NC if not used) (NC if not used) Fail safe Fail safe Fail safe Fail safe Logger output OPTION: nTX_DBG - logger out (low = 1) CLOCK SIGNALS SLOW_CLK_IN 8 1000 Bluetooth ANALOG SIGNALS RF 13 1000 nSHUTD 16 1000 PD Bluetooth POWER AND GND SIGNALS VDD_IO 22 1000 PI NC 23 1000 PU/PD I HY, 4mA EEPROM IC SCL (Internal) NC 21 1000 PU/PD IO HY, 4mA EEPROM IC IRQ (Internal) I 32.768-kHz clock in Fail safe IO I Bluetooth RF IO (not connected with antenna) Shutdown input (active low). I/O power supply 1.8 V Nom Main LDO input MLDO_IN 15 1000 I Connect directly to battery or to a pre-regulated 1.8-V supply Main LDO output (1.8 V nom.) Can not be used as 1.8V supply MLDO_OUT 10 1000 O due to internal connection to the RF part. PA LDO input CL1.5_LDO_IN 11 1000 I Connect directly to battery or to a pre-regulated 1.8-V supply GND 1 P Connect to Ground GND 12 P Connect to Ground GND 14 P Connect to Ground GND 20 P Connect to Ground EEPROM IO SIGNALS (EEPROM is optional in PAN13x product line) Remark: HCI_CTS is an input signal to the CC256X device: When HCI_CTS is low, then CC256X is allowed to send data to Host device. When HCI_CTS is high, then CC256X is not allowed to send data to Host device. 7 ESD: Human Body Model (HBM). JEDEC 22-A114 8 I = input; O = output; IO = bidirectional; P = power; PU = pulled up; PD = pulled down 9 I/O Type: Digital I/O cells. HY = input hysteresis, current = typ output current PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification 5.3. PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 11 of 55 DATE 11.06.2012 DEVICE POWER SUPPLY The PAN13XX Bluetooth radio solution is intended to work in devices with a limited power budget such as cellular phones, headsets, hand-held PC's and other batteryoperated devices. One of the main differentiators of the PAN13XX is its power management - its ability to draw as little current as possible. The PAN13XX device requires two kinds of power sources: * Main power supply for the Bluetooth - VDD_IN = VBAT * Power source for the 1.8 V I/O ring - VDD_IO The PAN13XX includes several on-chip voltage regulators for increased noise immunity. The PAN13XX can be connected either directly to the battery or to an external 1.8-V DC to DC converter. There are three ways to supply power: * Full-VBAT system: Maximum RF output power, but not optimum system power: * Full-DC2DC system: Lower RF output power, but optimum system power: PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 12 of 55 DATE 11.06.2012 * Mixed DC2DC-VBAT system: Maximum RF output power and optimum system power, but requires routing of VBAT: 5.4. CLOCK INPUTS The slow clock is always supplied from an external source. It is connected to the SLOW_CLK_IN pin number 8 and can be a digital signal with peak to peak of 0-1.8 V. The slow clock's frequency accuracy must be 32.768 kHz 250 ppm for Bluetooth usage (according to the Bluetooth specification). The Slow Clock 32.768 kHz is mandatory to start the internal controller, otherwise the module does not start up. 6. BLUETOOTH FEATURES * * * * * * * Support of Bluetooth2.1+EDR (Lisbon Release) up to HCI level. Very fast AFH algorithm for both ACL and eSCO. Supports typically 4 dBm Class 2 TX power w/o external PA, improving Bluetooth link robustness. Adjusting the host settings, the TX power can be increased to 10 dBm. However it is important, that the national regulations and Bluetooth specification are met. Digital Radio Processor (DRP) single-ended 50 ohm. Internal temperature detection and compensation ensures minimal variation in the RF performance over temperature. Flexible PCM and I2S digital audio/voice interfaces: Full flexibility of data-format (Linear, a-Law, -Law), data-width, data order, sampling and slot positioning, master/slave modes, high clock rates up to 15 MHz for slave mode (or 4.096 MHz for Master Mode). Lost packet concealment for improved audio. Proprietary low-power scan method for page and inquiry scans, achieves page and inquiry scans at 1/3rd normal power. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification 7. PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 13 of 55 DATE 11.06.2012 BLOCK DIAGRAM Note: The Slow Clock 32.768 kHz is mandatory, otherwise the module does not start up, refer to Chapter 5.4 for additional information. Note: The IO are 1.8V driven and might need external level shifter and LDO. The MLDO_OUT PIN can not be used as reference due to RF internal connection. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification 8. No. DS-13xx-2400-102 PRODUCT SPECIFICATION PANASONIC'S CODE See Chapter 28. Ordering Information REV. 3.31 PAGE 14 of 55 DATE 11.06.2012 TEST CONDITIONS Measurements shall be made under room temperature and humidity unless otherwise specified. 9. GENERAL DEVICE REQUIREMENTS AND OPERATION Temperature Humidity SW-Patch Supply Voltage 25 40 V2.30 3.3V to 10C 85%RH All specifications are over temperature and process, unless indicated otherwise. 9.1. ABSOLUTE MAXIMUM RATINGS Over operating free-air temperature range (unless otherwise noted). Note All parameters are measured as follows unless stated otherwise: VDD_IN No See 10 = 3.3 V, VDD_IO = 1.8 V. 11 Value Unit -0.5 to 5.5 V -0.5 to 2.145 V Ratings Over Operating Free-Air Temperature Range 10 11 1 VDD_IN 2 VDDIO_1.8V Supply voltage range 12 3 Input voltage to RF (Pin 13) -0.5 to 2.1 V 4 Operating ambient temperature range -20 to 70 C 5 Storage temperature range -40 to 125 C 6 Bluetooth RF inputs (Pin 13) 10 dBm 7 ESD: Human Body Model (HBM). JEDEC 22-A114 500 V VDD_IN is supplied to MLDO_IN (Pin 15) and CL1.5_LDO_IN (Pin 11), other options are described in Chapter 5.3. Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 12 Maximum allowed depends on accumulated time at that voltage: VDD_IN is defined in Reference schematics. When DC2DC supply is used, maximum voltage into MLDO_OUT and LDO_IN = 2.145 V. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification 9.2. No. DS-13xx-2400-102 PRODUCT SPECIFICATION PANASONIC'S CODE See Chapter 28. Ordering Information PAGE 15 of 55 DATE 11.06.2012 RECOMMENDED OPERATING CONDITIONS No Rating Condition 13 1 Power supply voltage 2 IO power supply voltage 3 High-level input voltage 4 Low-level input voltage 5 IO Input rise/fall times, 10% to 90% Symbol Min Max Unit VDD_IN 1.7 4.8 V VDD_IO 1.62 1.92 V Default VIH 0.65 x VDD_IO VDD_IO V Default VIL 0 0.35 x VDD_IO V Tr/Tf 1 10 ns 14 0 to 0.1 MHz 6 60 0.1 to 0.5 MHz Maximum ripple on VDD_IN (Sine wave) for 0.5 to 2.5 MHz 1.8 V (DC2DC) mode 2.5 to 3.0 MHz 50 7 Voltage dips on VDD_IN (VBAT) (duration = 577 s to 2.31 ms, period = 4.6 ms) 8 Maximum ambient operating temperature 9 Minimum ambient operating temperature mVp-p 30 15 > 3.0 MHz 9.3. REV. 3.31 5 15 16 400 mV 70 C -20 C CURRENT CONSUMPTION No 1 2 3 4 Characteristics Current consumption in 17 shutdown mode Current consumption in deep 18 sleep mode Total IO current consumption for active mode Current consumption during transmit DH5 full throughput Min 25C Typ 25C Max 25C 1 40 Min -20C Max +70C Unit 3 7 A 105 700 A 1 mA 1 40 Typ -20C Max -20C 1 Min +70C Typ +70C mA 13 Excluding 1.98 < VDD_IN < 2.2 V range - not allowed. 14 Asynchronous mode. 15 The device can be reliably operated for 7 years at Tambient of 70C, assuming 25% active mode and 75% sleep mode (15,400 cumulative active power-on hours). 16 The device can be reliably operated for 7 years at Tambient of 70C, assuming 25% active mode and 75% sleep mode (15,400 cumulative active power-on hours). 17 Vbat + Vio 18 Vbat + Vio + Vsd (shutdown) PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification 9.4. PANASONIC'S CODE See Chapter 28. Ordering Information No Rating 1 High-level output voltage, VOH 2 Low-level output voltage, VOL 3 IO input impedance 4 Output rise/fall times,10% to 90% (Digital pins) IO currents pull TX_DBG, PCM bus All others 16 of 55 DATE 11.06.2012 Condition Min Max Value at 2/4/8 mA 0.8 x VDD_IO VDD_IO V at 0.1 mA VDD_IO - 0.2 VDD_IO V at 2/4/8 mA 0 0.2 x VDD_IO V at 0.1 mA 0 0.2 V Resistance 1 Capacitance 5 pF CL = 20 pF 10 Ns M PU typ = 6.5 3.5 9.7 PD typ = 27 9.5 55 PU typ = 100 100 300 PD typ = 100 100 360 Parameter Symbol 19 1 Operation mode level 2 Shutdown mode level 3 Minimum time for nSHUT_DOWN low to reset the device 4 Rise/fall times A A Min Max Unit VIH 1.42 1.98 V VIL 0 0.4 V 5 Tr/Tf ms 20 s EXTERNAL DIGITAL SLOW CLOCK REQUIREMENTS (-20C TO +70C) No 1 2 3 Characteristics Condition Min Input slow clock frequency 5 Phase noise at 1 kHz Jitter Integrated 15000 Hz Slow clock limits input 8 Input impedance 9 Input capacitance voltage Typ Max 32768 Frequency input duty cycle 7 Symbol Input slow clock accuracy Bluetooth (Initial + temp + aging) Input transition time Tr/Tf - 10% to 90% 4 6 19 PAGE NSHUTD REQUIREMENTS No 9.6. REV. 3.31 GENERAL ELECTRICAL CHARACTERISTICS 5 9.5. No. DS-13xx-2400-102 PRODUCT SPECIFICATION Tr/Tf 15% over 300 to 50% Hz 250 Ppm 100 Ns 85% -125 dBc/Hz 1 Hz VIH 0.65 x VDD_IO VDD_IO VIL 0 0.35 x VDD_IO Square wave, DC coupled Unit V peak 1 M 5 pF Internal pull down retains shut down mode when no external signal is applied to this pin. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification 10. PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 17 of 55 DATE 11.06.2012 HOST CONTROLLER INTERFACE The CC256X incorporates one UART module dedicated to the host controller interface (HCI) transport layer. The HCI interface transports commands, events, ACL, and synchronous data between the Bluetooth device and its host using HCI data packets. The UART module supports H4 (4-wires) protocol with maximum baud rate of 4 Mbps for all fast clock frequencies. After power up the baud rate is set for 115.2 kbps, irrespective of fast clock frequency. The baud rate can thereafter be changed with a vendor specific command. The CC256X responds with a Command Complete Event (still at 115.2 kbps), after which the baud rate change takes place. HCI hardware includes the following features: * Receiver detection of break, idle, framing, FIFO overflow, and parity error conditions * Transmitter underflow detection * CTS/RTS hardware flow control The interface includes four signals: TXD, RXD, CTS, and RTS. Flow control between the host and the CC256X is byte-wise by hardware. Flow control is obtained by the following: When the UART RX buffer of the CC256X passes the "flow control" threshold, it will set the UART_RTS signal high to stop transmission from the host. When the UART_CTS signal is set high, the CC256X will stop its transmission on the interface. In case HCI_CTS is set high in the middle of transmitting a byte, the CC256X will finish transmitting the byte and stop the transmission. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification 11. PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 18 of 55 DATE 11.06.2012 AUDIO/VOICE CODEC INTERFACE The codec interface is a fully-dedicated programmable serial port that provides the logic to interface to several kinds of PCM or I2S codec's. PAN13XX supports all voice coding schemes required by Bluetooth specification - Log PCM (A-Law or -Law) and Linear (CVSD). In addition, module also supports transparent scheme: * Two voice channels * Master / slave modes * -Law, A-Law, Linear, Transparent coding schemes * Long and short frames * Different data sizes, order, and positions. * High rate PCM interface for EDR * Enlarged interface options to support a wider variety of codecs * PCM bus sharing 11.1. PCM HARDWARE INTERFACE The PCM interface is one implementation of the codec interface. It contains the following four lines: * Clock--configurable direction (input or output) * Frame Sync--configurable direction (input or output) * Data In--Input * Data Out--Output/3-state The Bluetooth device can be either the master of the interface where it generates the clock and the frame-sync signals, or slave where it receives these two signals. The PCM interface is fully configured by a vendor specific command. For slave mode, clock input frequencies of up to 16 MHz are supported. At clock rates above 12 MHz, the maximum data burst size is 32 bits. For master mode, the CC256X can generate any clock frequency between 64 kHz and 6 MHz. Please contact your sales representative if using the I2S bus over PCM. We strongly recommend adding a low pass filter (series resistor and capacitor to GND) to the bus for better noise suppression. It is not recommended to directly contact the host Controller/DSP with the PCM interface. 11.2. DATA FORMAT The data format is fully configurable: * The data length can be from 8 to 320 bits, in 1-bit increments, when working with two channels, or up to 640 bits when using 1 channel. The Data length can be set independently for each channel. * The data position within a frame is also configurable in with 1 clock (bit) resolution and can be set independently (relative to the edge of the Frame Sync signal) for each channel. * The Data_In and Data_Out bit order can be configured independently. For example; Data_In can start with the MSB while Data_Out starts with LSB. Each channel is separately configurable. The inverse bit order (that is, LSB first) is supported only for sample sizes up to 24 bits. * It is not necessary for the data in and data out size to be the same length. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 19 of 55 DATE 11.06.2012 * The Data_Out line is configured to `high-Z' output between data words. Data_Out can also be set for permanent high-Z, irrespective of data out. This allows the CC256X to be a bus slave in a multi-slave PCM environment. At powerup, Data Out is configured as high-Z. 11.3. FRAME IDLE PERIOD The codec interface has the capability for frame idle periods, where the PCM clock can "take a break" and become `0' at the end of the PCM frame, after all data has been transferred. The CC256X supports frame idle periods both as master and slave of the PCM bus. When CC256X is the master of the interface, the frame idle period is configurable. There are two configurable parameters: * Clk_Idle_Start - Indicates the number of PCM clock cycles from the beginning of the frame until the beginning of the idle period. After Clk_Idle_Start clock cycles, the clock will become `0'. * Clk_Idle_End - Indicates the time from the beginning of the frame till the end of the idle period. This time is given in multiples of PCM clock periods. The delta between Clk_Idle_Start and Clk_Idle_End is the clock idle period. For example, for PCM clock rate = 1 MHz, frame sync period = 10 kHz, Clk_Idle_Start = 60, Clk_Idle_End = 90. Between each two frame syncs there are 70 clock cycles (instead of 100). The clock idle period starts 60 clock cycles after the beginning of the frame, and lasts 90 - 60 = 30 clock cycles. This means that the idle period ends 100 - 90 = 10 clock cycles before the end of the frame. The data transmission must end prior to the beginning of the idle period. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 20 of 55 DATE 11.06.2012 11.4. CLOCK-EDGE OPERATION The codec interface of the CC256X can work on the rising or the falling edge of the clock. It also has the ability to sample the frame sync and the data at inversed polarity. This is the operation of a falling-edge-clock type of codec. The codec is the master of the PCM bus. The frame sync signal is updated (by the codec) on the falling clock edge and therefore shall be sampled (by the CC256X) on the next rising clock. The data from the codec is sampled (by the CC256X) on the clock falling edge. 11.5. TWO- CHANNEL PCM BUS EXAMPLE In below figure, a 2-channel PCM bus is shown where the two channels have different word sizes and arbitrary positions in the bus frame. (FT stands for Frame Timer) 11.6. AUDIO ENCODING The CC256X codec interface can use one of four audio-coding patterns: * A-Law (8-bit) * -Law (8-bit) * Linear (8- or 16-bit) PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 21 of 55 DATE 11.06.2012 11.7. IMPROVED ALGORITHM FOR LOST PACKETS The CC256X features an improved algorithm for improving voice quality when received voice data packets are lost. There are two options: * Repeat the last sample - possible only for sample sizes up to 24 bits. For sample sizes >24 bits, the last byte is repeated. * Repeat a configurable sample of 8 to 24 bits (depends on the real sample size), in order to simulate silence (or anything else) in the PCM bus. The configured sample will be written in a specific register for each channel. The choice between those two options is configurable separately for each channel. 11.8. BLUETOOTH/PCM CLOCK MISMATCH HANDLING In Bluetooth RX, the CC256X receives RF voice packets and writes these to the codec I/F. If the CC256X receives data faster than the codec I/F output allows, an overflow will occur. In this case, the Bluetooth has two possible behaviour modes: `allow overflow' and `don't allow overflow'. * If overflow is allowed, the Bluetooth will continue receiving data and will overwrite any data not yet sent to the codec. * If overflow is not allowed, RF voice packets received when buffer is full will be discarded. 11.9. BLUETOOTH INTER-IC SOUND (I2S) The CC256X can be configured as an Inter-IC Sound (I2S) serial interface to an I2S codec device. In this mode, the CC256X audio codec interface is configured as a bidirectional, full-duplex interface, with two time slots per frame: Time slot 0 is used for the left channel audio data and time slot 1 for the right channel audio data. Each time slot is configurable up to 40 serial clock cycles in length and the frame is configurable up to 80 serial clock cycles in length. Please contact your sales representative if using the I2S bus. We strongly recommend adding a low pass filter (series resistor and capacitor to GND) to the bus for better noise suppression. It is not recommended to directly contact the host Controller/DSP with the PCM interface. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT No. DS-13xx-2400-102 PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification PANASONIC'S CODE See Chapter 28. Ordering Information REV. 3.31 PAGE 22 of 55 DATE 11.06.2012 11.10. CURRENT CONSUMPTION FOR DIFFERENT BLUETOOTH SCENARIOS The following table gives average current consumption for different Bluetooth scenarios. Conditions: VDD_IN = 3.6 V, 25C, 26-MHz fast clock, nominal unit, 4 dBm output power. 12. BLUETOOTH RF PERFORMANCE No Characteristics Typ 1 Average Power Hopping DH5 [dBm] 2 Average Power: Ch0 [dBm] 3 Peak Power: Ch0 [dBm] 21, 22 21, 22 21, 22 4 Average Power: Ch39 [dBm] 5 Peak Power: Ch39 [dBm] 6 Average Power: Ch78 [dBm] 21, 22 21, 22 21, 22 21, 22 BT Spec BT Spec Max Min Class1 Class1 7.2 20 4 7.5 20 4 7.7 23 7.0 20 7.2 23 6.7 20 4 4 7 Peak Power: Ch78 [dBm] 7.0 23 8 Max. Frequency Tolerance: Ch0 [kHz] -2.6 75 -75 9 Max. Frequency Tolerance: Ch39 [kHz] -2.2 75 -75 10 Max. Frequency Tolerance: Ch78 [kHz] -2.1 75 -75 11 Max. Drift: Ch0_DH1 [kHz] 3.6 25 -25 12 Max. Drift: Ch0_DH3 [kHz] 3.7 40 -40 13 Max. Drift: Ch0_DH5 [kHz] 4.0 40 -40 14 Max. Drift Rate: Ch0_DH1 [kHz] -2.6 20 -20 15 Max. Drift Rate: Ch0_DH3 [kHz] -3.2 20 -20 16 Max. Drift Rate: Ch0_DH5 [kHz] -3.3 20 -20 17 Max. Drift: Ch39_DH1 [kHz] 4.0 25 -25 18 Max. Drift: Ch39_DH3 [kHz] 4.3 40 -40 19 Max. Drift: Ch39_DH5 [kHz] 4.3 40 -40 20 Max. Drift Rate: Ch39_DH1 [kHz] -3.1 20 -20 21 Max. Drift Rate: Ch39_DH3 [kHz] -3.6 20 -20 22 Max. Drift Rate: Ch39_DH5 [kHz] -3.7 20 -20 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT No. DS-13xx-2400-102 PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification PANASONIC'S CODE See Chapter 28. Ordering Information PAGE 23 of 55 DATE 11.06.2012 No Characteristics Typ BT Spec BT Spec Max Min Class1 Class1 23 Max. Drift: Ch78_DH1 [kHz] 4.1 25 -25 24 Max. Drift: Ch78_DH3 [kHz] 4.5 40 -40 25 Max. Drift: Ch78_DH5 [kHz] 4.4 40 -40 26 Max. Drift Rate: Ch78_DH1 [kHz] -3.4 20 -20 27 Max. Drift Rate: Ch78_DH3 [kHz] -3.9 20 -20 28 Max. Drift Rate: Ch78_DH5 [kHz] -4.1 20 -20 29 Delta F1 Avg: Ch0 [kHz] 159.5 175 140 30 Delta F2 Max.: Ch0 [%] 100.0 31 Delta F2 Avg/Delta F1 Avg: Ch0 0.9 32 Delta F1 Avg: Ch39 [kHz] 159.8 33 Delta F2 Max.: Ch39 [%] 100.0 34 Delta F2 Avg/Delta F1 Avg: Ch39 0.9 35 Delta F1 Avg: Ch78 [kHz] 159.1 36 Delta F2 Max.: Ch78 [%] 100.0 99.9 37 Delta F2 Avg/Delta F1 Avg: Ch78 0.9 0.8 45 Sensitivity -93.0 -81 46 f(H)-f(L): Ch0 [kHz] 918.4 1000 47 f(H)-f(L): Ch39 [kHz] 918.3 1000 48 f(H)-f(L): Ch78 [kHz] 918.2 1000 49 ACPower -3: Ch3 [dBm] -51.5 -40 50 ACPower -2: Ch3 [dBm] -50.4 -40 51 ACPower -1: Ch3 [dBm] -18.5 52 ACPower Center: Ch3 [dBm] 8.1 53 ACPower +1: Ch3 [dBm] -19.2 54 ACPower +2: Ch3 [dBm] -50.7 -40 55 ACPower +3: Ch3 [dBm] -53.3 -40 56 ACPower -3: Ch39 [dBm] -51.6 -40 57 ACPower -2: Ch39 [dBm] -50.7 -40 58 ACPower -1: Ch39 [dBm] -19.0 59 ACPower Center: Ch39 [dBm] 7.7 60 ACPower +1: Ch39 [dBm] -19.7 61 ACPower +2: Ch39 [dBm] -50.9 -40 62 ACPower +3: Ch39 [dBm] -53.2 -40 63 ACPower -3: Ch75 [dBm] -51.7 -40 64 ACPower -2: Ch75 [dBm] -50.7 -40 65 ACPower -1: Ch75 [dBm] -19.2 66 ACPower Center: Ch75 [dBm] 7.5 67 ACPower +1: Ch75 [dBm] -20.0 68 ACPower +2: Ch75 [dBm] -51.0 -40 69 ACPower +3: Ch75 [dBm] -53.4 -40 70 omega i 2-DH5: Ch0 [kHz] -4.7 75 -75 71 omega o + omega i 2-DH5: Ch0 [kHz] -6.0 75 -75 72 omega o 2-DH5: Ch0 [kHz] -1.5 10 -10 73 DEVM RMS 2-DH5: Ch0 [%] 0.0 0.2 74 DEVM Peak 2-DH5: Ch0 [%] 0.1 0.35 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH REV. 3.31 99.9 0.8 175 140 99.9 0.8 175 20 20 20 140 4 4 4 www.pedeu.pansonic.de CLASSIFICATION No. DS-13xx-2400-102 PRODUCT SPECIFICATION SUBJECT CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification PANASONIC'S CODE See Chapter 28. Ordering Information PAGE 24 of 55 DATE 11.06.2012 BT Spec BT Spec Max Min Class1 Class1 No Characteristics 75 DEVM 99% 2-DH5: Ch0 [%] 100.0 76 omega i 3-DH5: Ch0 [kHz] -3.7 75 -75 77 omega o + omega i 3-DH5: Ch0 [kHz] -5.8 75 -75 78 omega o 3-DH5: Ch0 [kHz] -2.6 10 -10 79 DEVM RMS 3-DH5: Ch0 [%] 0.0 0.13 80 DEVM Peak 3-DH5: Ch0 [%] 0.1 0.25 81 DEVM 99% 3-DH5: Ch0 [%] 100.0 82 omega i 2-DH5: Ch39 [kHz] -4.8 83 omega o + omega i 2-DH5: Ch39 [kHz] -6.1 75 -75 84 omega o 2-DH5: Ch39 [kHz] -1.4 10 -10 85 DEVM RMS 2-DH5: Ch39 [%] 0.0 0.2 86 DEVM Peak 2-DH5: Ch39 [%] 0.1 0.35 87 DEVM 99% 2-DH5: Ch39 [%] 100.0 88 omega i 3-DH5: Ch39 [kHz] -3.8 75 89 omega o + omega i 3-DH5: Ch39 [kHz] -5.9 75 -75 90 omega o 3-DH5: Ch39 [kHz] -2.6 10 -10 91 DEVM RMS 3-DH5: Ch39 [%] 0.0 0.13 92 DEVM Peak 3-DH5: Ch39 [%] 0.1 0.25 93 DEVM 99% 3-DH5: Ch39 [%] 100.0 94 omega i 2-DH5: Ch78 [kHz] -4.9 75 -75 95 omega o + omega i 2-DH5: Ch78 [kHz] -6.2 75 -75 96 omega o 2-DH5: Ch78 [kHz] -1.4 10 -10 97 DEVM RMS 2-DH5: Ch78 [%] 0.0 0.2 98 DEVM Peak 2-DH5: Ch78 [%] 0.1 0.35 99 DEVM 99% 2-DH5: Ch78 [%] 100.0 100 omega i 3-DH5: Ch78 [kHz] -3.8 75 -75 101 omega o + omega i 3-DH5: Ch78 [kHz] -6.0 75 -75 102 omega o 3-DH5: Ch78 [kHz] -2.7 10 -10 103 DEVM RMS 3-DH5: Ch78 [%] 0.0 0.13 104 DEVM Peak 3-DH5: Ch78 [%] 0.1 0.25 105 DEVM 99% 3-DH5: Ch78 [%] 100.0 No Characteristics 1 Operation frequency range Typ Condition Min 99 99 75 99 99 Typ Max BT Spec 2480 Channel spacing 1 3 Input impedance 50 Sensitivity, Dirty Tx on -75 99 2 4 -75 99 2402 GFSK, BER = 0.1% -93.0 Unit MHz MHz -70 Pi/4-DQPSK, BER = 0.01% -92.5 -70 8DPSK, BER = 0.01% -85.5 -70 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH REV. 3.31 dBm www.pedeu.pansonic.de CLASSIFICATION PRODUCT SPECIFICATION SUBJECT CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification No PANASONIC'S CODE See Chapter 28. Ordering Information Characteristics No. DS-13xx-2400-102 PAGE 25 of 55 DATE 11.06.2012 Condition Typ 30 kHz to 1 GHz 20 , 21 , 22 Max -30 Unit 1 Tx and Rx out-of-band emissions Output signal = 7dBm 1 to 12.75 GHz 2 2nd harmonic at 7dBm output power 20, 21, 22 -30 dBm at 7dBm output power 20, 21, 22 -30 dBm 3 3rd harmonic REV. 3.31 20, 21, 22 -30 dBm The values are measured conducted. Better suppression of the spurious emissions with an antenna can be expected as, antenna frequently have band pass filter characteristics. 13. SOLDERING TEMPERATURE-TIME PROFILE (FOR REFLOW SOLDERING) 13.1. FOR LEAD SOLDER 10 1s Recommended temp. profile for reflow soldering Temp.[C] 30 +20/-10s 235C max. 220 5C 200C 150 10C 90 30s Time [s] 20 Includes effects of frequency hopping 21 Average according FCC, IC and ETSI requirements. Above +7dBm output power (refer also to 22) the customer has to verify the final product against national regulations. 22 +7dBm related to power register value 18, according to TI service pack 2.30 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 26 of 55 DATE 11.06.2012 13.2. FOR LEADFREE SOLDER Our used temp. profile for reflow soldering Temp.[C] 30 +20/-10s 230C -250C max. 220C 150C - 190C 90 30s Time [s] Reflow permissible cycle: 2 Opposite side reflow is prohibited due to module weight. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification 14. PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 27 of 55 DATE 11.06.2012 MODULE DIMENSION 14.1. MODULE DIMENSIONS PAN131X WITHOUT ANTENNA No. Item Dimension Tolerance 1 Width 6.50 0.20 2 Lenght 9.00 0.20 3 Height 1.80 0.20 Remark With case PAN131X Module Drawing PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 28 of 55 DATE 11.06.2012 14.2. MODULE DIMENSIONS PAN132X WITH ANTENNA No. Item Dimension Tolerance 1 Width 9.50 0.20 2 Lenght 9.00 0.20 3 Height 1.80 0.20 Remark With case PAN132X Module Drawing PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification 15. No. DS-13xx-2400-102 PRODUCT SPECIFICATION PANASONIC'S CODE See Chapter 28. Ordering Information REV. 3.31 PAGE 29 of 55 DATE 11.06.2012 FOOTPRINT OF THE MODULE 15.1. FOOTPRINT PAN131X WITHOUT ANTENNA All dimensions are The outer dimensions have a tolerance of 0.2mm. in millimeters. The layout is symetric to center. The inner pins (2,4,6,9,11,14,16,18,21,23) are shifted to the center by 1mm. 3.95 2.95 1.80 0.90 20 17 18 15 16 13 12 14 6,50 21 Pad = 24 x 0.60mm x 0.60mm 11 Top View 22 10 23 9 2 24 1 0.90 1.70 1.80 2.70 19 4 3 6 5 8 7 9,00 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT No. DS-13xx-2400-102 PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification PANASONIC'S CODE See Chapter 28. Ordering Information REV. 3.31 PAGE 30 of 55 DATE 11.06.2012 15.2. FOOTPRINT PAN132X WITH ANTENNA All dimensions are The outer dimensions have a tolerance of 0.2mm. in millimeters. C D A B 9.50 19 20 17 18 15 16 13 12 14 21 Pad = 28 x 0.60mm x 0.60mm 11 22 10 23 9 2 24 0.55 1.00 0.90 1.70 1.80 2.70 1.80 1.80 The layout is symetric to center. The inner pins (2,4,6,9,11,14,16,18,21,23) are shifted to the center by 1mm. 1 4 3 6 5 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH 8 7 www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification 16. PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 31 of 55 DATE 11.06.2012 LABELING DRAWING The above pictures show the laser marking on the top case, this is only an example from PAN1315. 17. MECHANICAL REQUIREMENTS No. 1 2 Item Limit Condition More than 75% of the soldering area shall be Reflow soldering with coated by solder recommendable temperature profile Resistance to soldering It shall be satisfied electrical requirements and not See Chapter 13.2 heat be mechanical damage Solderability PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification 18. No. DS-13xx-2400-102 PRODUCT SPECIFICATION PANASONIC'S CODE See Chapter 28. Ordering Information REV. 3.31 PAGE 32 of 55 DATE 11.06.2012 RECOMMENDED FOOT PATTERN 18.1. RECOMMENDED FOOT PATTERN PAN131X WITHOUT ANTENNA Dimensions in mm. 9,00 19 20 17 18 15 16 13 12 14 Top View 22 10 23 9 2 24 1 6,50 6,00 21 Pad = 24 x 0.60mm x 0.60mm 11 4 3 6 5 8 7 8,50 The land pattern dimensions above are meant to serve only as a guide. This information is provided without any legal liability. For the solder paste screen, use as a first guideline the same foot print as shown in the figure above. Solder paste screen cutouts (with slightly different dimensions) might be optimum depending on your soldering process. For example, the solder paste screen thickness chosen might have an effect. The solder screen thickness depends on your production standard 120m to 150m is recommended. IMPORTANT: Although the bottom side of PAN131X is fully coated, no copper such as through hole vias, planes or tracks on the board component layer should be located below the PAN131X to avoid creating a short. In cases where a track or through hole via has to be located under the module, it must be kept away from PAN131X bottom pads. The PAN131X multilayer pcb contains an inner RF shielding plane, therefore no pcb shielding plane below the module is needed. When using an onboard ceramic antenna, place the antenna on the edge of your carrier board (if allowable). If you have any questions on these points, contact your local Panasonic representative. Schematics and layouts may be sent to wireless@eu.panasonic.com for final review. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 33 of 55 DATE 11.06.2012 18.2. RECOMMENDED FOOT PATTERN PAN132X WITH ANTENNA Dimensions in mm. The land pattern dimensions above are meant to serve only as a guide. For the solder paste screen, use as a first guideline the same foot print as shown in the Figure above. Solder paste screen cutouts (with slightly different dimensions) might be optimum depending on your soldering process. For example, the solder paste screen thickness chosen might have an effect. The solder screen thickness depends on your production standard 120m to 150m is recommended. IMPORTANT: In cases where a track or through hole via has to be located under the module, it must be kept away from PAN132X bottom pads. The PAN132X multilayer pcb contains an inner RF shielding plane, therefore no pcb shielding plane below the module is needed. If you have any questions on these points, contact your local Panasonic representative. Schematics and layouts may be sent to wireless@eu.panasonic.com for final review. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification PANASONIC'S CODE See Chapter 28. Ordering Information 19. LAYOUT RECOMMENDATIONS WITH ANTENNA (PAN132X) 20. BLUETOOTH LE (LOW ENERGY) PAN1316/26 No. DS-13xx-2400-102 REV. 3.31 PAGE 34 of 55 DATE 11.06.2012 20.1. NETWORK TOPOLOGY Bluetooth Low Energy is designed to reduce power consumption. It can be put into a sleep mode and is only activated for event activities such as sending files to a gateway, PC or mobile phone. Furthermore the maximum power consumption is set to less than 15 mA and the average power consumption is about 1 uA. The benefit of low energy consumption are short messages and establishing very fast connections (few ms). Using these techniques, energy consumption is reduced to a tenth of a Classic Bluetooth unit. Thus, a small coin cell - such as a CR2032 - is capable of powering a device for up to 10 years of operation. To be backwards compatible with Classic Bluetooth and to be able to offer an affordable solution for very inexpensive devices, Panasonic Low Energy Bluetooth modules are offered in two versions: PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 35 of 55 DATE 11.06.2012 Dual-mode: Bluetooth Low Energy technology combined with Classic Bluetooth functionality on a single module. Dual mode devices act as gateways between these two technologies. Single Mode: Bluetooth Low Energy technology to optimize power consumption, which is particularly useful for products powered by small batteries. These modules have embedded controllers allowing the module to operate autonomously in low cost applications that lack intelligence. This data sheet describes dual-mode Bluetooth Low Energy technology combined with Classic Bluetooth functionality on a single module. Additional information on Panasonic's single mode products can be found by visiting www.panasonic.com/rfmodules or write an e-mail to wireless@eu.panasonic.com. 20.2. MODULE FEATURES Fully compliant with Bluetooth 4.0: * * * * * Optimized for proximity and sports use Supports up to 10 simultaneous connections Multiple sniff instances are tightly coupled to minimize power consumption Independent buffering allows a large number of multiple connections without affecting BR/EDR performance Includes built-in coexistence and prioritization handling for BR/EDR and LE PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 36 of 55 DATE 11.06.2012 20.3. CURRENT CONSUMPTION FOR DIFFERENT LE SCENARIOS Conditions: VDD_IN = 3.6 V, 25C, 26-MHz fast clock, nominal unit, 10 dBm output power Mode Description Advertising, non-connectable Advertising, discoverable Scanning Connected (master role) 21. Advertising in all 3 channels 1.28msec advertising interval 15Bytes advertise Data Advertising in all 3 channels 1.28msec advertising interval 15Bytes advertise Data Listening to a single frequency per window 1.28msec scan interval 11.25msec scan window 500msec connection interval 0msec Slave connection latency Empty Tx/Rx LL packets Average Current Unit 104 A 121 A 302 A 169 A ANT PAN1317/27 ANT+ (sometimes ANT + or ANT Plus) is an interoperability function that can be added to the base ANT protocol (a proprietary wireless sensor network technology).[ 21.1. NETWORK TOPOLOGY ANTTM is a wireless sensor network protocol operating in the 2.4 GHz spectrum. Designed for ultra-low power, ease of use, efficiency and scalability, ANT supports peer-to-peer, star, tree and fixed mesh topologies. It provides reliable data communications, flexible and adaptive network operation and cross-talk immunity. The ANT protocol stack is compact, requiring minimal microcontroller resources to reduce system costs, lighten the computational burden and improve efficiency. Low-level security is implemented to allow user-defined network security. PAN1317/1327 provides the first wireless, single-chip solution with dual-mode ANT and Bluetooth connectivity with inclusion of TI's CC2567 device. This solution wirelessly connects 13 million ANT-based devices to the more than 3 billion Bluetooth endpoint devices used by people every day, creating new market opportunities for companies building ANT products and Bluetooth products alike. CC2567 requires 80% less board area than a design with two single-mode solutions (one ANT+, one Bluetooth) and increases the wireless transmission range up to two times the distance of a single-mode ANT+ solution. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 37 of 55 DATE 11.06.2012 21.2. MODULE FEATURES Fully compliant with ANT protocol: * ANT solution optimized for fitness, health and consumers use cases * Supports up to eight simultaneous connections, various network topologies and highresolution proximity pairing * Includes built-in coexistence and prioritization handling for BR/EDR and ANT Features Benefits Dual-mode ANT+ and Bluetooth (Bluetooth v2.1 + EDR) on a single chip - Requires 80% less board area than any dual module or device design Reduces costs associated with incorporating two wireless technologies Fully validated optimized single antenna solution - Enables simultaneous operation of ANT+ and Bluetooth without the need for two devices or modules - Includes built-in coexistence Best-in-class Bluetooth and ANT RF performance: - +10 dBm Tx power with transmit power control - -93 dBm sensitivity - Delivers twice the distance between the aggregator and ANT sensor device than competitive single-mode ANT solutions - Enables a robust and high-throughput connection with extended range Support for: - ANT+ ultra low power (master and slave devices) - Bluetooth power saving modes (park, sniff, hold) - Bluetooth ultra low power modes (deep sleep, power down) - Improves battery life and power efficiency of the finished product Turnkey solution: - Fully integrated module - Complete development kit with software and documentation - TI MSP430 hardware and software platform integration (optional) - Ease of integration into system allows quick time to market - Reduces costs and time associated with certification 21.3. ANT CURRENT CONSUMPTION Mode Description Average Current Unit Rx message mode 250msec interval 380 A Rx message mode 500msec interval 205 A Rx message mode 1000msec interval 118 A PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification 22. PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 38 of 55 DATE 11.06.2012 TRIPLE MODE (BR/EDR + BLUETOOTH LOW ENERGY + ANT) PAN1323 The PAN1323 has been engineered to give designers the flexibility to implement Bluetooth Classic (BR/EDR), Bluetooth Low Energy and ANT into an application using a single module, reducing cost and footprint area. Refer to the paragraphs above for complete descriptions on each of the three protocols. The module is fully hardware compatible with the PAN1315, 15A, 16, 17, 25, 25A, 26 and 27. A highly efficent single RF block serves all three protocols. Protocols access the RF block using time division multiplexing. The application layer determines the priority and timing of the RF block.Customers interested in this unique module are encouraged to contact StoneStreetOne for a Bluetooth SIG certified stack. 22.1. TRIPLE MODE CURRENT CONSUMPTION The current consumption of the PAN1326 is a function of the protocol that the module is running at any point in time. Refer to the paragraphs above for details on current consumption for each of the three protocols or software vendor. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification 23. PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 39 of 55 DATE 11.06.2012 DEVELOPMENT OF APPLICATIONS Mindtree Ltd. has developed a Bluetooth SPP freeware for TIs MSP430 and Panasonics PAN1315(A) and PAN1325(A). For other software refer to Chapter 24 or visit the following link www.panasonic.com/rfmodules. 23.1. TOOLS TO BE NEEDED Tool Source TI - MSP-EXP430F5438 - Experimenter Board MSP-EXP430F5438 MSP-FET430UIF430 TI PAN1323EMK Panasonic PAN1323ETU CC2567-PAN1327ANT-BTKIT CC2567 + PAN1327 wiki TI - MSP-FET430UIF430 - Debugging Interface PAN1323EMK - Bluetooth Evaluation Module Kit for MSP430 For information on Bluetooth + ANT kit for PAN1327 PAN1323ETU In addition you need the software development environment, e.g. IAR Embedded Workbench, refer to: http://wiki.msp430.com/index.php/MSP430_Bluetooth_Platform Evaluation kits and modules are available through Panasonic's network of authorized distributors. For any additional information, please visit www.panasonic.com/rfmodules. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification 24. PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 40 of 55 DATE 11.06.2012 LIST OF PROFILES Profile Software Developer Controller Availability MindTree Seeran Stollmann StoneStreetOne ARS TI, MSP430 STM32, MSP430 TI, MSP430 TI, Stellaris Multiple Now Now Now Now Now Bluetooth SPP and others SPP HDP, SPP A2DP, AVRCP, SPP SPP and others Bluetooth LE All ARS, MindTree, TI, MSP430 and others StoneStreetOne, Stollmann Upon request Dynastream MSP430 and others Now StoneStreetOne MSP430 and others Now ANT Protocoll ANT Triple Mode Stack SPP For all other profiles contact your local sales representative. 25. RELIABILITY TESTS The measurement should be done after being exposed to room temperature and humidity for 1 hour. No. Condition Item Limit 1 Vibration test a) Freq.:10~50Hz,Amplitude:1.5mm Electrical parameter should be in a) 20min. / cycle,1hrs. each of XYZ axis specification b) Freq.:30~100Hz, 6G b) 20min. / cycle,1hrs. each of XYZ axis 2 Shock test the same as above Dropped onto hard wood from height of 50cm for 3 times 3 Heat cycle test the same as above -40C for 30min. and +85C for 30min.; each temperature 300 cycles 4 Moisture test the same as above +60C, 90% RH, 300h 5 Low temp. test the same as above -40C, 300h 6 High temp. test the same as above +85C, 300h PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification 26. PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 41 of 55 DATE 11.06.2012 CAUTIONS Failure to follow the guidelines set forth in this document may result in degrading of the product's functions and damage to the product. 26.1. DESIGN NOTES (1) (2) (3) (4) (5) (6) (7) Follow the conditions written in this specification, especially the control signals of this module. The supply voltage has to be free of AC ripple voltage (for example from a battery or a low noise regulator output). For noisy supply voltages, provide a decoupling circuit (for example a ferrite in series connection and a bypass capacitor to ground of at least 47uF directly at the module). This product should not be mechanically stressed when installed. Keep this product away from heat. Heat is the major cause of decreasing the life of these products. Avoid assembly and use of the target equipment in conditions where the products' temperature may exceed the maximum tolerance. The supply voltage should not be exceedingly high or reversed. It should not carry noise and/or spikes. Keep this product away from other high frequency circuits. 26.2. INSTALLATION NOTES (1) (2) (3) (4) (5) (6) (7) (8) (9) Reflow soldering is possible twice based on the conditions in Chapter 15. Set up the temperature at the soldering portion of this product according to this reflow profile. Carefully position the products so that their heat will not burn into printed circuit boards or affect the other components that are susceptible to heat. Carefully locate these products so that their temperatures will not increase due to the effects of heat generated by neighboring components. If a vinyl-covered wire comes into contact with the products, then the cover will melt and generate toxic gas, damaging the insulation. Never allow contact between the cover and these products to occur. This product should not be mechanically stressed or vibrated when reflowed. To repair a board by hand soldering, keep the conditions of this chapter. Do not wash this product. Refer to the recommended pattern when designing a board. Pressing on parts of the metal cover or fastening objects to the metal will cause damage to the unit. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 42 of 55 DATE 11.06.2012 26.3. USAGE CONDITIONS NOTES (1) (2) (3) (4) (5) (6) (7) Take measures to protect the unit against static electricity. If pulses or other transient loads (a large load applied in a short time) are applied to the products, check and evaluate their operation befor assembly on the final products. Do not use dropped products. Do not touch, damage or soil the pins. Follow the recommended condition ratings about the power supply applied to this product. Electrode peeling strength: Do not add pressure of more than 4.9N when soldered on PCB. Pressing on parts of the metal cover or fastening objects to the metal cover will cause damage. These products are intended for general purpose and standard use in general electronic equipment, such as home appliances, office equipment, information and communication equipment. 26.4. STORAGE NOTES (1) (2) (3) (4) (5) The module should not be stressed mechanically during storage. Do not store these products in the following conditions or the performance characteristics of the product, such as RF performance will be adversely affected: * Storage in salty air or in an environment with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NOX * Storage in direct sunlight * Storage in an environment where the temperature may be outside the range of 5C to 35C range, or where the humidity may be outside the 45 to 85% range. * Storage of the products for more than one year after the date of delivery Storage period: check the adhesive strength of the embossed tape and soldering after 6 months of storage. Keep this product away from water, poisonous gas and corrosive gas. This product should not be stressed or shocked when transported. Follow the specification when stacking packed crates (max. 10). PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 43 of 55 DATE 11.06.2012 26.5. SAFETY CAUTIONS These specifications are intended to preserve the quality assurance of products and individual components. Before use, check and evaluate the operation when mounted on your products. Abide by these specifications, without deviation when using the products. These products may short-circuit. If electrical shocks, smoke, fire, and/or accidents involving human life are anticipated when a short circuit occurs, then provide the following failsafe functions, as a minimum. (1) (2) Ensure the safety of the whole system by installing a protection circuit and a protection device. Ensure the safety of the whole system by installing a redundant circuit or another system to prevent a single fault causing an unsafe status. 26.6. OTHER CAUTIONS (1) (2) (3) (4) (5) (6) (7) This specification sheet is copyrighted. Do not use the products for other purposes than those listed. Be sure to provide an appropriate fail-safe function on your product to prevent an additional damage that may be caused by the abnormal function or the failure of the product. This product has been manufactured without any ozone chemical controlled under the Montreal Protocol. These products are not intended for other uses, other than under the special conditions shown below. Before using these products under such special conditions, check their performance and reliability under the said special conditions carefully to determine whether or not they can be used in such a manner. * In liquid, such as water, salt water, oil, alkali, or organic solvent, or in places where liquid may splash. * In direct sunlight, outdoors, or in a dusty environment * In an environment where condensation occurs. * In an environment with a high concentration of harmful gas (e.g. salty air, HCl, Cl2, SO2, H2S, NH3, and NOX) If an abnormal voltage is applied due to a problem occurring in other components or circuits, replace these products with new products because they may not be able to provide normal performance even if their electronic characteristics and appearances appear satisfactory. When you have any question or uncertainty, contact Panasonic. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification 27. PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 44 of 55 DATE 11.06.2012 PACKAGING 27.1. PACKAGING OF PAN131X WITHOUT ANTENNA Tape Dimension Packing in Tape trailer (empty) 1 x circumference / hub (min 160mm) Machine readable 2D-Barcode PAN1315 01/01 ENW89809M5A YYWWDLL FCC ID: T7V1315 PAN1315 01/01 ENW89809M5A YYWWDLL FCC ID: T7V1315 Machine readable 2D-Barcode Direction of unreeling (for customer) component packed area standard 1500pcs leader (empty) minimum 10 pitch Top cover tape more than 1 x circumference plus 100mm to avoid fixing of tape end on sealed modules. Empty spaces in component packed area shall be less than two per reel and those spaces shall not be consecutive. Top cover tape shall not be found on reel holes and shall not stick out from reel. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION No. DS-13xx-2400-102 PRODUCT SPECIFICATION SUBJECT CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification PANASONIC'S CODE See Chapter 28. Ordering Information REV. 3.31 PAGE 45 of 55 DATE 11.06.2012 PAN1315 01/01 ENW89809M5A YYWWDLL FCC ID: T7V1315 Machine readable 2D-Barcode Component direction Reel dimension TAPE SIZE A MAX B MIN 24mm 330.0 1.5 C 13 +0.5 -0.2 D MIN 1.0 N 20.2 100.0 All dimensions in millimeters unless otherwise stated PANASONIC INDUSTRIAL DEVICES EUROPE GMBH W1 25.0 +2.0 -0.0 W2 MAX 30.4 W3 24.4 +3.0 -0.5 Assembly Method *Latch *Latch (2PC) www.pedeu.pansonic.de CLASSIFICATION PRODUCT SPECIFICATION SUBJECT CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 46 of 55 DATE 11.06.2012 Label for Package 105 mm PAN1315 Customer Code (1T) (1P) (2P) (9D) (Q) (HW/SW) ENW89818C2JF Lotcode [YYWWDLL] Example from above: YY year printed 08 WW normal calendar week printed 01 D day printed 5 (Friday) L line identifier, if more as one printed 1 L lot identifier per day printed 1 Customer Order Code, if any, otherwise company name will be printed Panasonic Order Code fix as ENW89818C2JF Datecode as [YYWW] Quantity [XXXX], variable max. 1500 Hardware /Software Release Total Package PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT No. DS-13xx-2400-102 PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification PANASONIC'S CODE See Chapter 28. Ordering Information REV. 3.31 PAGE 47 of 55 DATE 11.06.2012 27.2. PACKAGING FOR PAN132X WITH ANTENNA Tape Dimension Y X X Y SECTION YSCALE 3.5 : Y 1 SECTION XSCALE 3.5 : X 1 Ao Bo Ko K1 F P1 W 9.90 9.40 2.80 2.00 7.50 12.00 16.00 +/- 0.10 +/- 0.10 +/- 0.10 +/- 0.10 +/- 0.10 +/- 0.10 +/- 0.30 (I) (II) (III) (IV) Tooling code: Flatbed - 9 Estimated Max Length: 72m per 22B3 Measured from centreline of sprocket hole to centreline of pocket. Cumulative tolerance of 10 sprocket holes is 0.20 . Measured from centreline of sprocket hole to centreline of pocket. Other material available. ALL DIMENSIONS IN MILLIMETRES UNLESS OTHERWISE STATED. Packing in Tape Pin1 Marking All other packaging information is similar to Chapter 27.1 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification 28. No. DS-13xx-2400-102 PRODUCT SPECIFICATION PANASONIC'S CODE See Chapter 28. Ordering Information REV. 3.31 PAGE 48 of 55 DATE 11.06.2012 ORDERING INFORMATION Version PAN1315(2) PAN1315A PAN1325(2) PAN1325A Function Bluetooth v2.1 + EDR Bluetooth v2.1 + EDR Bluetooth EDR BLE 4.0 Bluetooth PAN1326 EDR BLE 4.0 Bluetooth PAN1317 EDR ANT Bluetooth PAN1327 EDR ANT Bluetooth EDR PAN1323 BLE ANT Bluetooth EDR PAN1323ETU BLE ANT v2.1 + PAN1316 v2.1 + v2.1 + v2.1 + Controller Part number Antenna board CC2560 ENW89818C2JF NO CC2560A ENW89829C2JF NO CC2560 ENW89818A2JF YES CC2560A ENW89829A2JF YES ENW89823C2JF NO 1500 ENW89823C2JF YES 1500 ENW89827C2JF NO 1500 ENW89827A2JF YES 1500 ENW89828A2JF YES Check with your software developer for details on triple 1500 mode functionality. ENW89825A2JF YES PAN1323 has the ability to act as any version (BT, BT+BLE 1 or BT+ANT) and is only used for evaluation. CC2564 CC2564 CC2567 CC2567 v2.1 + 4.0 v2.1 + 4.0 CC2569 CC25xx on Notes MOQ (1) CC2560A offers reductions in init script size over CC2560 1500 and is recommended for all new designs CC2560A offers reductions in init script size over CC2560 1500 and is recommended for all new designs. Notes: (1) Abbreviation for Minimum Order Quantity (MOQ). The standard MOQ for mass production are 1500 pieces, fewer only on customer demand. Samples for evaluation can be delivered at any quantity. (2) Not recommended for new designs, please refer to Chapter 1.1 PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification 29. PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 49 of 55 DATE 11.06.2012 ROHS DECLARATION Declaration of environmental compatibility for supplied products: Hereby we declare to our best present knowledge based on declaration of our suppliers that this product do not contain by now the following substances which are banned by Directive 2002/95/EC (RoHS) or if contain a maximum concentration of 0,1% by weight in homogeneous materials for * * * * * Lead and lead compounds Mercury and mercury compounds Chromium (VI) PBB (polybrominated biphenyl) category PBDE (polybrominated biphenyl ether) category And a maximum concentration of 0,01% by weight in homogeneous materials for * 30. Cadmium and cadmium compounds DATA SHEET STATUS This data sheet contains the final specification (RELEASE). Panasonic reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Supplementary data will be published at a later date. Consult the most recently issued data sheet before initiating or completing a design. Use this URL to search for the most recent version of this data sheet: PAN13xx Latest Data Sheet! PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification 31. PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 50 of 55 DATE 11.06.2012 HISTORY FOR THIS DOCUMENT Revision Date Modification / Remarks 0.90 18.12.2009 1 preliminary version 0.95 01.03.2010 Updated Chapter 14.2 and 28. 0.96 Not released Change ESD Information on foot note 7 in chapter Pin Description 0.97 25.03.2010 Various updates. Deleted links to TI Datasheet. 0.98 21.04.2010 0.99 22.10.2010 1.00 04.11.2010 1 internal Release. 1.01 03.12.2010 Included reference to PAN1325 Application Note. AN-1325-2420-111.pdf 1.02 10.01.2011 Changed wording in Chapter 35 "Industry Canada Certification". 1.03 23.05.2011 Included DOC for PAN1315 series. Included PAN13xx ANT and BLE Addendum Rev1.x.pdf reference. Included Note for IO voltage and MLD_OUT pin. 1.04 02.07.2011 Corrected wording in Chapter 36 European R&TTE Declaration of Conformity. 1.05 28.10.2011 1.06 15.11.2011 3.00 11.01.2012 Merging PAN13xx documents into this specification and correct some format 3.10 16.01.2012 Minor mistakes fixed 3.2 29.05.2012 3.30 11.06.2012 3.31 27.06.2012 32. st Updated Links Some minor changes in Chapter 8 and 9.1 and change the base for the values in Chapter 9. Adopted changes according to CC2560 Datasheet. Included Interface Description, performance values. Not released. st Including CC2560A silicon PAN1315A HW40 at Chapter 1.1, Chapter New PAN1315A and Chapter 0. Deleted ES label in Chapter Added overview for the core specification and their addendums. Updated front page. Updated Related Documents. DoC replaced with revised version Added triple mode stack Module PAN1323, add PAN1323 to ordering and software information overview, Software Block Diagram added, Bluetooth Inter IC-Sound chapter information added Layout Recommandations with Antenna added, Application Note LGA added Added design information to use low pass filter (chapter 11.1 / 11.9) for better noise surpression when using PCM interface RELATED DOCUMENTS For an update, search in the suitable homepage. [1] PAN1323ETU Design-Guide: http://www.panasonic.com/industrial/includes/pdf/PAN1323ETUDesignGuide.pdf [2] CC2560 Product Bulletin: http://focus.ti.com/pdfs/wtbu/cc2560_slyt377.pdf [3] Bluetooth SW for MSP430 is supported by IAR IDE service pack 5.10.6 and later. Use full IAR version edition (not the kick-start version). You can find info on IAR at http://www.iar.com/website1/1.0.1.0/3/1/ and www.MSP430.com . Note, that there is an option for a 30-day free version of IAR evaluation edition. [4] PAN13xx CAD data: http://www.pedeu.panasonic.de/pdf/174ext.zip [5] Application Note Land Grid Array: http://www.pedeu.panasonic.de/pdf/184ext.pdf PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification 33. PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 51 of 55 DATE 11.06.2012 GENERAL INFORMATION (c) Panasonic Industrial Devices Europe GmbH. All rights reserved. This document may contain errors. Panasonic reserves the right to make corrections, modifications, enhancements, improvements, and other changes to its literature at any time. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to Panasonic's terms and conditions of sale supplied at the time of order acknowledgment. If we deliver ES samples to the customer, these samples have the status Engineering Samples. This means, the design of this product is not yet concluded. Engineering Samples may be partially or fully functional, and there may be differences to be published Data Sheet. Engineering Samples are not qualified and are not to be used for reliability testing or series production. Disclaimer: Customer acknowledges that samples may deviate from the Data Sheet and may bear defects due to their status of development and the lack of qualification mentioned above. Panasonic rejects any liability or product warranty for Engineering Samples. In particular, Panasonic disclaims liability for damages caused by * the use of the Engineering Sample other than for Evaluation Purposes, particularly the installation or integration in an other product to be sold by Customer, * deviation or lapse in function of Engineering Sample, * improper use of Engineering Samples. Panasonic disclaimes any liability for consequential and incidental damages. Panasonic assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using Panasonic components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. In case of any questions, contact your local sales representative. 34. REGULATORY INFORMATION 34.1. FCC NOTICE The devices PAN13xx, for details refer to Chapter 28, including the antennas, which are listed in 34.534.5, complies with Part 15 of the FCC Rules. The device meets the requirements for modular transmitter approval as detailed in FCC public Notice DA001407.transmitter Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 52 of 55 DATE 11.06.2012 34.2. CAUTION The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Panasonic Industrial Devices Europe GmbH may void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: * Reorient or relocate the receiving antenna. * Increase the separation between the equipment and receiver. * Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. * Consult the dealer or an experienced radio/TV technician for help 34.3. LABELING REQUIREMENTS The Original Equipment Manufacturer (OEM) must ensure that FCC labeling requirements are met. This includes a clearly visible label on the outside of the OEM enclosure specifying the appropriate Panasonic FCC identifier for this product as well as the FCC Notice above. The FCC identifier are FCC ID: T7V1315. This FCC identifier is valid for all PAN13xx modules, for details, see the Chapter 28. Ordering Information. In any case the end product must be labelled exterior with "Contains FCC ID: T7V1315" 34.4. ANTENNA WARNING For the related part number of PAN13xx refer to Chapter 28. Ordering Information. This devices are tested with a standard SMA connector and with the antennas listed below. When integrated in the OEMs product, these fixed antennas require installation preventing end-users from replacing them with non-approved antennas. Any antenna not in the following table must be tested to comply with FCC Section 15.203 for unique antenna connectors and Section 15.247 for emissions. The FCC identifier for this device with the antenna listed in item 1 are the same (FCC ID: T7V1315). 34.5. APPROVED ANTENNA LIST Note: We are able to qualify your antenna and will add to this list as that process is completed. Item Part Number Manufacturer Frequency Band Type Gain (dBi) 1 2450AT43B100 Johanson Technologies 2.4GHz Chip-Antenna +1.3 2 LDA212G3110K Murata 2.4GHz Chip-Antenna +0.9 3 4788930245 2.4GHz Chip-Antenna +0.5 Wurth Elektronik PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 53 of 55 DATE 11.06.2012 34.6. RF EXPOSURE PAN13XX To comply with FCC RF Exposure requirements, the Original Equipment Manufacturer (OEM) must ensure that the approved antenna in the previous table must be installed. The preceding statement must be included as a CAUTION statement in manuals for products operating with the approved antennas in the previous table to alert users on FCC RF Exposure compliance. Any notification to the end user of installation or removal instructions about the integrated radio module is not allowed. The radiated output power of PAN13xx with mounted ceramic antenna (FCC ID: T7V1315) is far below the FCC radio frequency exposure limits. Nevertheless, the PAN13xx shall be used in such a manner that the potential for human contact during normal operation is minimized. End users may not be provided with the module installation instructions. OEM integrators and end users must be provided with transmitter operating conditions for satisfying RF exposure compliance. 35. INDUSTRY CANADA CERTIFICATION PAN1315 is licensed to meet the regulatory requirements of Industry Canada (IC), license: IC: 216Q-1315 Manufacturers of mobile, fixed or portable devices incorporating this module are advised to clarify any regulatory questions and ensure compliance for SAR and/or RF exposure limits. Users can obtain Canadian information on RF exposure and compliance from www.ic.gc.ca. This device has been designed to operate with the antennas listed in Table 20 above, having a maximum gain of 1.3 dBi. Antennas not included in this list or having a gain greater than 1.3 dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. due to the model size the IC identifier is displayed in the installation instruction. 36. EUROPEAN R&TTE DECLARATION OF CONFORMITY Hereby, Panasonic Industrial Devices Europe GmbH, declares that the Bluetooth module PAN1315 and their versions is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. As a result of the conformity assessment procedure described in Annex III of the Directive 1999/5/EC, the end-customer equipment should be labelled as follows: PAN13xx and their versions in the specified reference design can be used in the following countries: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, The Netherlands, the United Kingdom, Switzerland, and Norway. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification PANASONIC'S CODE See Chapter 28. Ordering Information PANASONIC INDUSTRIAL DEVICES EUROPE GMBH No. DS-13xx-2400-102 REV. 3.31 PAGE 54 of 55 DATE 11.06.2012 www.pedeu.pansonic.de CLASSIFICATION SUBJECT PRODUCT SPECIFICATION CLASS 1 or 2 BLUETOOTH MODULE CUSTOMER'S CODE PAN13XX Core Specification 37. PANASONIC'S CODE See Chapter 28. Ordering Information No. DS-13xx-2400-102 REV. 3.31 PAGE 55 of 55 DATE 11.06.2012 LIFE SUPPORT POLICY This Panasonic product is not designed for use in life support appliances, devices, or systems where malfunction can reasonably be expected to result in a significant personal injury to the user, or as a critical component in any life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Panasonic customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panasonic for any damages resulting. PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pedeu.pansonic.de