RL201 THRU RL207 GENERAL PURPOSE PLASTIC RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 2.0 Amperes Features Plastic package has Underwriters Laboratory Flammability Classification 94V-0 High surge current capability 2.0 ampere operation at TA=75 with no thermal runaway Low reverse leakage Construction utilizes void-free molded plastic technique High temperature soldering guaranteed: 250 /10 seconds, 0.375 (9.5mm) lead length, 5 lbs. (2.3Kg) tension Mechanical Data DIM ENSIONS Case: DO-15 molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750, method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.014 ounce, 0.39 gram inches DIM Maximum Ratings and Electrical Characteristics mm Min. Max. Min. Max. A 0.228 0.299 5.8 7.6 B 0.102 0.142 2.6 3.6 C 0.028 0.034 0.71 0.86 D 1.000 - 25.40 - @25 Note unless otherwise specified Symbols RL201 RL202 RL203 RL204 RL205 RL206 RL207 Units Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Maximum average forward current at TA=75 I(AV) 2.0 Amps Peak forward surge current 8.3mS single half sine-wave superimposed on rated load (MIL-STD-750D 4066 method) IFSM 70.0 Amps Maximum instantaneous forward voltage at IFM=2.0A, TA=25 (Note 2) VF 1.0 Volts IR 5.0 50.0 A CJ 20.0 F 40 /W Maximum DC reverse current at rated DC blocking voltage TA=25 TA=100 Typical junction capacitance (Note 1) Typical thermal resistance Operating and storage temperature range R JA TJ, TSTG -65 to 175 Notes: (1) Measured at 1.0MHz and applied reverse voltage of 4.0 volts. (2) Pulse test: pulse width 300uSec, Duty cycle 1%. 1 RATINGS AND CHARACTERISTIC CURVES 2 RATINGS AND CHARACTERISTIC CURVES 3