www.saia-burgess.com
saia-burgess Switches 126 |127
XT
Special Switches
Double break
XT
Characteristics
8 mm contact gap and 8 mm creepage and air-gaps between individual
and accessible parts
Safe mechanical separation by reset springs
Optional insulation accessory and key for maintenance purposes
Rating
Up to 400 VAC, 16,5 A
Dimensions (mm)
30 32 12
Actuator
Shrouded plunger
Approvals
UL, cUL, CSA, ENEC
Preferred Range
Ordering Reference
Actuating Force Operating pos. Terminal Circuit Actuator Contacts Electrical rating
(N) (ozf) (mm) (in)
XTD22AZ1
3,8 13,6 13,0 0,511 Faston NO Plunger Silver nickel Up to 250 VAC, 15.5 A
40621_Inhalt_127 14.10.2004 8:03 Uhr Seite 127
www.saia-burgess.com saia-burgess Switches
128 |129
[0.16]
[0.67]
3.5
4
FREE
POSITION
OPERATING
POSITION
[0.54]
1.6±0.2
[0.25]
2.6
[0.49]
3.1
[0.41]
3.3±0.2
1
TOTAL
TRAVEL
POSITION
[0.87]
[1.57]
[0.35]
[0.71]
5.6
[0.22]
5.5±0.1
4.5
[0.98]
4.3
±
0.05 [0.17]
10
6
[0.26]
3.7
1.6
[1.04]
[1.18]
6.6
30
[0.58]
[0.98]
[1.61]
[0.35]
2 6
2
10
6.3 X 0.8
[0.25 X 0.03]
Recommended maximum electrical ratings
Voltage Load Inductive load Horsepower Approval
(max) (A)
125 VAC 15.5 (0.75 pf) - - UL 1054/CSA 22.2 No. 55 - 6,000 operations
250 VAC 15.5 (0.75 pf) - - UL 1054/CSA 22.2 No. 55 - 6,000 operations
125 VAC - - 1⁄2HP (0.45 pf) UL 1054 - Horsepower- 6,000 operations
250 VAC - - 1⁄2HP (0.45 pf) UL 1054 - Horsepower- 6,000 operations
125 VAC - - 11⁄2HP (0.45 pf) UL 1054 - Horsepower- 6,000 operations
250 VAC - - 11⁄2HP (0.45 pf) UL 1054 - Horsepower- 6,000 operations
30 VAC 0,5 - - EN.60158-1 T85 (°C) 50,0000 operations
400 VAC 16,5 8 - EN.60158-1 T85 (°C) 50,0000 operations
30 VDC 0,5 - - UL 1054/CSA 22.2 No. 55 - 6,000 operations
Specifications
Housing Glass fibre reinforced polyester
Plunger Glass fibre reinforced polyester
Mechanism Normally open
Contacts Silver nickel
Terminals 6.3 mm (0.25 in) faston (quick connect) - brass
Temperature range °C –20°C to +85°C
Mechanical life 106cycles minimum (impact free actuation)
Protection IP40 (enclosure)
Mounting Snap-on or screw mounting
Actuator Plunger (can be held depressed for maintenance with optional key)
Accessories Maintenance key N41784 and multiplug housing XTMHSG
Circuit diagram
Dimensions
XT
40621_Inhalt_128 14.10.2004 8:04 Uhr Seite 128
www.saia-burgess.com
saia-burgess Switches 128 |129
Type
XT
Actuating
D 3.8 N
Characteristic
Terminals
22 6.3 mm (0.25 in) faston (quick connect) terminals
66 4,8 mm (0.19 in) faston (quick connect) terminals
A 100 000 operation cycles
Form
– Without identification: snap-on mounting with shroud
J Snap-on mounting without shroud
P Without shroud, without snap-on mounting
K
Approvals
AZ1 UL, cUL, CSA and ENEC
Ordering Reference
XT
Operating Characteristics
Actuating Release Free Operating Total Travel Over
Actuator Reference Force Force Position Position Position travel
Maximum Minimum Maximum Maximum
(N) (ozf) (N) (ozf) (mm) (in) (mm) (in) (mm) (in)
Plunger
XTD22AZ1 3,8 13,600 5,8 20,8 18,0 0,708 13,0 ± 0.4 0,511 ± 0.016 10,0 0,394 3,0 0,118
( ± 0.5) ( ± 3.5) (main contact)
12,6 0,496
(low voltage contact)
40621_Inhalt_129 14.10.2004 8:04 Uhr Seite 129
