GBL005, GBL01, GBL02, GBL04, GBL06, GBL08, GBL10
www.vishay.com Vishay General Semiconductor
Revision: 16-Aug-13 1Document Number: 88609
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Glass Passivated Single-Phase Bridge Rectifier
FEATURES
UL recognition file number E54214
Ideal for printed circuit boards
High surge current capability
Typical IR less than 0.1 μA
High case dielectric strength
Solder dip 275 °C max. 10 s, per JESD 22-B106
Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
General purpose use in AC/DC bridge full wave rectification
for monitor, TV, printer, SMPS, adapter, audio equipment,
and home appliances application.
MECHANICAL DATA
Case: GBL
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test
Polarity: As marked on body
Notes
(1) Unit mounted on 3.0" x 3.0" x 0.11" thick (7.5 cm x 7.5 cm x 0.3 cm) aluminum plate
(2) Unit mounted on PCB at 0.375" (9.5 mm) lead length and 0.5" x 0.5" (12 mm x 12 mm) copper pads
PRIMARY CHARACTERISTICS
Package GBL
IF(AV) 4 A
VRRM 50 V, 100 V, 200 V, 400 V, 600 V,
800 V, 1000 V
IFSM 150 A
IR5 μA
VF at IF = 4.0 A 1.0 V
TJ max. 150 °C
Diode variations In-Line
Case Type GBL
~~
~
~
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL GBL005 GBL01 GBL02 GBL04 GBL06 GBL08 GBL10 UNIT
Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V
Maximum average forward
rectified output current at
TC = 50 °C (1)
IF(AV) 4.0 A
TA = 40 °C (2) 3.0
Peak forward surge current single sine-wave
superimposed on rated load IFSM 150 A
Rating for fusing (t < 8.3 ms) I2t93A
2s
Operating junction and storage temperature
range TJ, TSTG - 55 to + 150 °C
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER TEST CONDITIONS SYMBOL GBL005 GBL01 GBL02 GBL04 GBL06 GBL08 GBL10 UNIT
Maximum instantaneous
forward voltage drop per diode 4.0 A VF 1.0 V
Maximum DC reverse current
at rated DC blocking voltage
per diode
TA = 25 °C
IR
5.0
μA
TA = 125 °C 500
Typical junction capacitance
per diode 4.0 V, 1 MHz CJ 95 40 pF
GBL005, GBL01, GBL02, GBL04, GBL06, GBL08, GBL10
www.vishay.com Vishay General Semiconductor
Revision: 16-Aug-13 2Document Number: 88609
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
(1) Unit mounted on 3.0" x 3.0" x 0.11" thick (7.5 cm x 7.5 cm x 0.3 cm) aluminum plate
(2) Unit mounted on PCB at 0.375" (9.5 mm) lead length and 0.5" x 0.5" (12 mm x 12 mm) copper pads
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
Fig. 1 - Derating Curves Outzput Rectified Current
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge
Current Per Diode
Fig. 3 - Typical Forward Voltage Characteristics Per Diode
Fig. 4 - Typical Reverse Characteristics Per Diode
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL GBL005 GBL01 GBL02 GBL04 GBL06 GBL08 GBL10 UNIT
Typical thermal resistance RJA (2) 22 °C/W
RJC (1) 3.5
ORDERING INFORMATION (Example)
PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE
GBL06-E3/45 2.18 45 20 Tube
GBL06-E3/51 2.18 51 400 Anti-static PVC tray
050 100 150
0
1.0
2.0
3.0
4.0
5.0
60 Hz Resistive or Inductive Load
Heat-Sink Mounting
3.0 x 3.0 x 0.11" Thick
(7.5 x 7.5 x 0.3 cm)
Aluminum Plate
P. C . B . M o unted
0.47 x 0.47" (12 x 12 mm)
Copper Pads with 0.375"
(9.5 mm) Lead Length
Ambient Temperature (°C)
Average Forward Output Current (A)
110 100
0
50
100
150
Number of Cycles at 60 Hz
Peak Forward Surge Current (A)
T
J
= T
J
Max.
Single Sine-Wave
1.0 Cycle
0.4 0.6 0.81.0 1.2 1.4 1.6
0.01
0.1
1
10
100
Instantaneous Forward Voltage (V)
Instantaneous Forward Current (A)
T
J
= 25 °C
Pulse Width = 300 µs
1 % Duty Cycle
020 40 60 80100
0.01
0.1
1
10
100
1000
50 - 400 V
60 - 1000 V
T
A
= 125 °C
T
A
= 25 °C
Percent of Rated Peak Reverse Voltage (%)
Instantaneous Reverse Current (µA)
GBL005, GBL01, GBL02, GBL04, GBL06, GBL08, GBL10
www.vishay.com Vishay General Semiconductor
Revision: 16-Aug-13 3Document Number: 88609
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 5 - Typical Junction Capacitance Per Diode Fig. 6 - Typical Transient Thermal Impedance Per Diode
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
0.1 110 100
10
100
1000
50 - 400 V
600 - 1000 V
Reverse Voltage (V)
Junction Capacitance (pF)
T
J
= 25 °C
f = 1.0 MHz
V
sig
= 50 mVp-p
0.01 0.1 110 100
0.1
1
10
100
t - Heating Time (s)
Transient Thermal Impedance (°C/W)
Case Type GBL
0.125 (3.17) x 45°
Chamfer
0.825 (20.9)
0.815 (20.7)
0.421 (10.7)
0.411 (10.4)
0.718 (18.2)
0.682 (17.3)
0.098 (2.5)
0.075 (1.9)
Lead Depth
0.022 (0.56)
0.018 (0.46)
0.210 (5.3)
0.190 (4.8)
0.040 (1.02)
0.030 (0.76) 0.140 (3.56)
0.128 (3.25)
0.022 (0.56)
0.018 (0.46)
0.050 (1.27)
0.040 (1.02)
0.098 (2.5)
0.075 (1.9)
0.095 (2.41)
0.080 (2.03)
0.080 (2.03)
0.060 (1.50)
Polarity shown on front side of case, positive lead beveled corner
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED