HAAV-27 - IDEC - Datasheet.Live

ø16mm XA Series

Emergency Stop Switches

(Illuminated Type)

Think Automation and beyond...

The World’s First ø16 mm, 4-contact Emergency Stop Switch.

Compact size - only 27.9 mm deep behind the panel.

•1 to 4NC main contacts and 1NO monitor contact

•The depth behind the panel is only 27.9 mm for 1 to 4

contacts.

•IDEC’s original “Safe break action” ensures that the con-

tacts open when the contact block is detached from the

operator.

•Push-to-lock, Pull or Turn-to-reset operator

•Two operator sizes: ø29 and ø40 mm

•Safety lock mechanism (IEC60947-5-5, 6.2)

•Degree of protection IP65 (IEC60529)

•Direct opening action mechanism (IEC60947-5-5, 5.2,

IEC60947-5-1, Annex K)

•UL, c-UL recognized. EN compliant

•RoHS compliant (EU directive 2002/95/EC). Contains no

lead, cadmium, mercury, hexavalent chromium, PBB, or

PBDE.

Illumination Ratings

Note: Except for stop switches (operator color: gray).

Contact Ratings

(NC main contacts/NO monitor contact)

• Minimum applicable load: 5V AC/DC, 1 mA (reference value)

(Operating area may vary according to the operating conditions and load

types.)

• The rated operating currents are measured at resistive/inductive load types

specified in IEC 60947-5-1.

Specifications

Note: Except for stop switches (operator color: gray).

Rated V oltage Operating V oltage Rated Current

24V AC/DC 24V AC/DC ±10% 11 mA

Rated Insulation Voltage (Ui) 300V (illuminated par t: 60V)

Rated Current (Ith) 5A

Rated Operating Voltage (Ue) 30V 125V 250V

Rated Operating Current

Main

Contacts

50/60 Hz

Resistive Load

(AC-12) –3A3A

Inductive Load

(AC-15) – 1.5A 1.5A

Resistive Load

(DC-12) 2A 0.4A 0.2A

Inductive Load

(DC-13) 1A 0.22A 0.1A

Monitor

Contacts

50/60 Hz

Resistive Load

(AC-12) – 1.2A 0.6A

Inductive Load

(AC-14) – 0.6A 0.3A

Resistive Load

(DC-12) 2A 0.4A 0.2A

Inductive Load

(DC-13) 1A 0.22A 0.1A

Standard Mark Approval Organization/

File No.

UL508

CSA C22.2 No. 14 UL/c-UL File No. E68961

EN60947-5-1

EN60947-5-5 (Note)

TÜV Product Service

European Commission’s Low

Voltage Directive

GB14048.5 CCC

No. 2005010305150899

Applicable Standards IEC60947-5-1, EN60947-5-1

IEC60947-5-5 (Note), EN60947-5-5 (Note)

JIS C8201-5-1, UL508, CSA C22.2 No. 14

Operating Temperature –25 to +55°C (no freezing)

Operating Humidity 45 to 85% RH (no condensation)

Storage Temperature –45 to +80°C

Operating Force Push to lock: 10.5N

Pull to reset: 10N

Turn to reset: 0.16 N·m

Minimum Force

Required for Direct

Opening Action 60N

Minimum Operator

Stroke Required for

Direct Opening Action 4.0 mm

Maximum Operator

Stroke 4.5 mm

Contact Resistance 50 mΩ maximum (initial value)

Insulation Resistance 100 MΩ minimum (500V DC megger)

Overvoltage Category II

Impulse Withstand

Voltage 2.5 kV

Pollution Degree 3 (inside LED unit: 2)

Operation Frequency 900 operations/hour

Shock Resistance Operating extremes: 150 m/s2

Damage limits: 1000 m/s2

Vibration Resistance

Operating extremes: 10 to 500 Hz, amplitude 0.35

mm acceleration 50 m/s2

Damage limits: 10 to 500 Hz, amplitude 0.35

mm acceleration 50 m/s2

Mechanical Life 250,000 operations minimum

Electrical Life 100,000 operations minimum

250,000 operations minimum (24V AC/DC, 100 mA)

Degree of Protection IP65 (IEC60529)

Short-circuit Protection 250V/10A fuse

(Type aM, IEC60269-1/IEC60269-2)

Conditional

Short-circuit Current 1000A

Terminal Style Solder terminal, PC Board terminal

Recommended

Tightening Torque

for Locking Ring 0.88 N·m

Connectable Wire 1.25 mm2 maximum (AWG16 maximum)

Soldering Conditions 310 to 350°C, 3 seconds maximum

Weight ø29 mm type: 23g, ø40 mm type: 28g

Direct Opening Action

ø16mm XA Series Illuminated Emergency Stop Switches

Types

Illuminated Solder Terminal / PC Board Terminal Types

• Terminal cover (XA9Z-VL2) is ordered separately.

Dimensions Panel Cut-out

PC Board Layout (Bottom View) LED Unit Internal Circuit

Appearance NC Main

Contact NO Monitor

Contact

Type No. Operator

Color

Terminal Style

Solder Terminal PC Board Terminal

ø29mm Operator 1NC — XA1E-LV301Q4R XA1E-LV301Q4VR

Dark red only

2NC — XA1E-LV302Q4R XA1E-LV302Q4VR

3NC — XA1E-LV303Q4R XA1E-LV303Q4VR

4NC — XA1E-LV304Q4R XA1E-LV304Q4VR

1NC 1NO XA1E-LV311Q4R XA1E-LV311Q4VR

2NC 1NO XA1E-LV312Q4R XA1E-LV312Q4VR

3NC 1NO XA1E-LV313Q4R XA1E-LV313Q4VR

ø40mm Operator 1NC — XA1E-LV401Q4R XA1E-LV401Q4VR

2NC — XA1E-LV402Q4R XA1E-LV402Q4VR

3NC — XA1E-LV403Q4R XA1E-LV403Q4VR

4NC — XA1E-LV404Q4R XA1E-LV404Q4VR

1NC 1NO XA1E-LV411Q4R XA1E-LV411Q4VR

2NC 1NO XA1E-LV412Q4R XA1E-LV412Q4VR

3NC 1NO XA1E-LV413Q4R XA1E-LV413Q4VR

ø29mm Operator

Solder Terminal Type

27.2

19.8

8.7 4.5

Mounting Panel Thickness: 0.5 to 3.7

2.1 25.8 20.6

30.4

PC Board Terminal Type

3.1

29.4

30.4

ø29.8

Locking Ring

Rubber Gasket

XA9Z-VL2

Terminal Cover

25.8

20.6

30.4

ø40mm Operator

ø40

ø29

••

•• Illuminated Type

+0.2

ø16.2

+0.2

1.7

+0.2

17.9

All dimensions in mm.

8.7

19.8

8.7

19.8

10-ø1.2 holes

6.5

11.2

4.5

3-ø1.7 holes

• The values shown above are the minimum

dimensions for mounting with other ø16

mm pushbuttons. For other control units of

different sizes and styles, determine the

values according to the dimensions, opera-

tion, and wiring convenience.

ø29mm Operator 40 mm minimum

ø40mm Operator 50 mm minimum

ø16.2 +0.2

X1 R1 R2

LED

LED chip

Protection diode

Terminal Arrangement (Bottom View)

Illuminated Type

Left Right

TOP

X1 X2

TOP

Left Right

X1 X2

LEDLED

••

•• With NO monitor contacts

NC main contacts: Terminals 1-2

NO monitor contacts: Terminals 3-4

••

•• NC main contacts only

NC main contacts: Terminals 1-2

1NC: Terminals on right

2NC: Terminals on right and left

3NC: Terminals on right, left, and top

1NC: Terminals on top

2NC: Terminals on right and left

Mounting Hole Layout

ø16mm XA Series Illuminated Emergency Stop Switches

Nameplates

Accessories and Replacement Parts

Description Legend Type No. Material Plate Color Legend Color

For ø29mm Operator (blank) HAAV-0

Polyamide Yellow Black

EMERGENCY STOP HAAV-27

For ø40mm Operator (blank) HAAV4-0

EMERGENCY STOP HAAV4-27

Description & Appearance Material Type No. Ordering

Type No. Package

Quantity Remarks

PBT XA9Z-VL2 XA9Z-VL2PN02 2 •White

•Used for solder terminals.

For Solder Terminal XA9Z-LED2R XA9Z-LED2R

•Replacement LED unit/

For PC Board Terminal XA9Z-LED2VR XA9Z-LED2VR

Stainless Steel MT-101 MT-101 •Used for removing the LED unit.

erm

over

LED

emova

Removing the LED Unit

Pull out the LED unit while squeezing the latches on the LED unit using

the LED unit removal tool (MT-101).

Squeeze the LED unit on

the latches and pull out.

TOP side Latches

Installing the LED Unit

Align the to of the LED unit with the TOP marking on the

contact block. Push the LED unit into the contact block.

TOP side

• Turn off power to the XA series emergency stop switch before

starting installation, removal, wiring, maintenance, and inspec-

tion of the relays. Failure to turn power off may cause electrical

shock or ﬁre hazard.

• Use the LED unit removal tool when replacing the LED unit to

avoid burn on your hands.

• Use wires of the proper size to meet the voltage and current

requirements, and solder the wires correctly. If soldering is

incomplete, the wire may heat during operation, causing ﬁre

hazard.

• Read the user’ s manual to ensure correct operation before start-

ing installation, wiring, operation, maintenance, and inspection

of the XA emergency stop switches.

Safety Precautions

IDEC CORPORATION (USA)

1175 Elko Drive, Sunnyvale, CA 94089-2209, USA

Tel: +1-408-747-0550 / (800) 262-IDEC (4332)

Fax: +1-408-744-9055 / (800) 635-6246

E-mail: opencontact@idec.com

IDEC CANADA LIMITED

Unit 22-151, Brunel Road Mississauga, Ontario,

L4Z 1X3, Canada

Tel: +1-905-890-8561, Toll Free: (888) 317-4332,

Fax: +1-905-890-8562

E-mail: sales@ca.idec.com

IDEC ELECTRONICS LIMITED

Unit 2, Beechwood, Chineham Business Park,

Basingstoke, Hampshire, RG24 8WA, UK

Tel: +44-1256-321000, Fax: +44-1256-327755

E-mail: sales@uk.idec.com

IDEC ELEKTROTECHNIK GmbH

Wendenstrasse 331, D-20537 Hamburg, Germany

Tel: +49-40-25 30 54 10, Fax: +49-40-25 30 54 24

E-mail: service@idec.de

IDEC AUSTRALIA PTY. LTD.

2/3 Macro Court, Rowville, Victoria 3178, Australia

Tel: +61-3-9763-3244, Toll Free: 1800-68-4332,

Fax: +61-3-9763-3255, E-mail: sales@au.idec.com

IDEC IZUMI ASIA PTE. LTD.

No. 31, Tannery Lane #05-01, Dragon Land Building,

Singapore 347788

Tel: +65-6746-1155, Fax: +65-6844-5995

E-mail: info@sg.idec.com

7-31, Nishi-Miyahara 1-Chome, Yodogawa-ku, Osaka 532-8550, Japan

Tel: +81-6-6398-2571, Fax: +81-6-6392-9731

E-mail: products@idec.co.jp

Specifications and other descriptions in this catalog are subject to change without notice.

Cat. No. EP1093-0 FEBRUARY 2006 14DNP PRINTED IN JAPAN

IDEC IZUMI (H.K.) CO., LTD.

Unit 1505-07, DCH Commercial Centre No. 25,

Westlands Road,

Quarry Bay, Hong Kong

Tel: +852-2803-8989, Fax: +852-2565-0171

E-mail: info@hk.idec.com

IDEC (SHANGHAI) CORPORATION

Room 608-609, 6F, Gangtai Plaza, No. 700,

Yan'an East Road, Shanghai 200030, China

Tel: +86-21-5353-1000, Fax: +86-21-5353-1263

E-mail: idec@cn.idec.com

IDEC TAIWAN CORPORATION

8F, No. 79, Hsin Tai Wu Road, Sec. 1, Hsi-Chih,

Taipei County, Taiwan

Tel: +886-2-2698-3929, Fax: +886-2-2698-3931

E-mail: service@idectwn.com.tw