AON7400A 30V N-Channel MOSFET General Description Product Summary The AON7400A combines advanced trench MOSFET technology with a low resistance package to provide extremely low RDS(ON). This device is suitable for use as a high side switch in SMPS and general purpose applications. VDS 30V 40A ID (at VGS=10V) RDS(ON) (at VGS=10V) < 7.5m RDS(ON) (at VGS = 4.5V) < 10.5m 100% UIS Tested 100% Rg Tested Top View DFN 3x3 EP Bottom View D Top View 1 8 2 7 3 6 4 5 G S Pin 1 Absolute Maximum Ratings TA=25C unless otherwise noted Symbol Parameter Drain-Source Voltage VDS Gate-Source Voltage VGS TC=25C Continuous Drain Current G Pulsed Drain Current Continuous Drain Current C V A 100 15 IDSM TA=70C 20 28 IDM TA=25C Units V 40 ID TC=100C Maximum 30 A 12 Avalanche Current C IAS, IAR 27 A Avalanche energy L=0.1mH C TC=25C EAS, EAR 36 mJ Power Dissipation B TA=25C Power Dissipation A Junction and Storage Temperature Range Rev 3: Mar. 2011 3.1 Steady-State Steady-State RJA RJC www.aosmd.com W 2 TJ, TSTG Symbol t 10s W 10 PDSM TA=70C Thermal Characteristics Parameter Maximum Junction-to-Ambient A Maximum Junction-to-Ambient A D Maximum Junction-to-Case 25 PD TC=100C -55 to 150 Typ 30 60 4.2 C Max 40 75 5 Units C/W C/W C/W Page 1 of 6 AON7400A Electrical Characteristics (TJ=25C unless otherwise noted) Symbol Parameter STATIC PARAMETERS BVDSS Drain-Source Breakdown Voltage Min Conditions ID=250A, VGS=0V Typ 30 1 Zero Gate Voltage Drain Current IGSS Gate-Body leakage current VGS(th) Gate Threshold Voltage VDS=VGS ID=250A 1.5 ID(ON) On state drain current VGS=10V, VDS=5V 100 TJ=55C VDS=0V, VGS= 20V 100 1.97 6.2 7.5 9.4 11.3 VGS=4.5V, ID=20A 8.4 10.5 VDS=5V, ID=20A 55 Static Drain-Source On-Resistance gFS Forward Transconductance VSD Diode Forward Voltage IS=1A,VGS=0V 0.7 IS Maximum Body-Diode Continuous Current TJ=125C DYNAMIC PARAMETERS Ciss Input Capacitance Output Capacitance Reverse Transfer Capacitance Rg Gate resistance 2.5 920 VGS=0V, VDS=15V, f=1MHz VGS=0V, VDS=0V, f=1MHz nA V A RDS(ON) Crss A 5 VGS=10V, ID=20A Units V VDS=30V, VGS=0V IDSS Coss Max 1150 m m S 1 V 30 A 1380 pF 125 180 235 pF 60 105 150 pF 0.55 1.1 1.65 SWITCHING PARAMETERS Qg(10V) Total Gate Charge 16 20 24 nC Qg(4.5V) Total Gate Charge 7.6 9.5 11.4 nC 2 2.7 3.2 nC 5 7 nC Qgs Gate Source Charge Qgd Gate Drain Charge tD(on) Turn-On DelayTime tr Turn-On Rise Time tD(off) Turn-Off DelayTime tf Turn-Off Fall Time trr Qrr VGS=10V, VDS=15V, ID=20A 3 VGS=10V, VDS=15V, RL=0.75, RGEN=3 IF=20A, dI/dt=500A/s Body Diode Reverse Recovery Time Body Diode Reverse Recovery Charge IF=20A, dI/dt=500A/s 6.5 ns 2 ns 17 ns 3.5 ns 7 8.7 10.5 11 13.5 16 ns nC A. The value of RJA is measured with the device mounted on 1in2 FR-4 board with 2oz. Copper, in a still air environment with TA =25C. The Power dissipation PDSM is based on R JA t 10s value and the maximum allowed junction temperature of 150C. The value in any given application depends on the user's specific board design. B. The power dissipation PD is based on TJ(MAX)=150C, using junction-to-case thermal resistance, and is more useful in setting the upper dissipation limit for cases where additional heatsinking is used. C. Repetitive rating, pulse width limited by junction temperature TJ(MAX)=150C. Ratings are based on low frequency and duty cycles to keep initial TJ =25C. D. The RJA is the sum of the thermal impedence from junction to case RJC and case to ambient. E. The static characteristics in Figures 1 to 6 are obtained using <300s pulses, duty cycle 0.5% max. F. These curves are based on the junction-to-case thermal impedence which is measured with the device mounted to a large heatsink, assuming a maximum junction temperature of TJ(MAX)=150C. The SOA curve provides a single pulse ratin g. G. The maximum current rating is limited by bond-wires. H. These tests are performed with the device mounted on 1 in2 FR-4 board with 2oz. Copper, in a still air environment with TA=25C. COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, FUNCTIONS AND RELIABILITY WITHOUT NOTICE. Rev 3: Mar. 2011 www.aosmd.com Page 2 of 6 AON7400A TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 100 120 10V 5V 100 VDS=5V 4.5V 6V 80 60 4V ID(A) ID (A) 80 60 40 40 3.5V 20 20 VGS=3V 0 0 1 2 3 0 4 5 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 VGS(Volts) Figure 2: Transfer Characteristics (Note E) VDS (Volts) Fig 1: On-Region Characteristics (Note E) 1.8 10 Normalized On-Resistance 12 RDS(ON) (m ) 25C 125C VGS=4.5V 8 6 VGS=10V 4 2 VGS=10V ID=20A 1.6 1.4 17 VGS=4.5V 5 ID=20A 1.2 2 10 1 0.8 0 5 10 15 20 25 30 0 75 100 125 150 175 Temperature (C) 0 Figure 4: On-Resistance vs. Junction Temperature 18 (Note E) ID (A) Figure 3: On-Resistance vs. Drain Current and Gate Voltage (Note E) 25 25 50 1.0E+02 ID=20A 1.0E+01 20 40 15 IS (A) RDS(ON) (m ) 1.0E+00 125C 125C 1.0E-01 25C 1.0E-02 10 1.0E-03 5 1.0E-04 25C 1.0E-05 0 2 4 6 8 10 VGS (Volts) Figure 5: On-Resistance vs. Gate-Source Voltage (Note E) Rev 3: Mar. 2011 www.aosmd.com 0.0 0.2 0.4 0.6 0.8 1.0 1.2 VSD (Volts) Figure 6: Body-Diode Characteristics (Note E) Page 3 of 6 AON7400A TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 10 1600 VDS=15V ID=20A 1400 8 Ciss Capacitance (pF) VGS (Volts) 1200 6 4 1000 800 600 400 2 Coss 200 0 0 5 10 15 Qg (nC) Figure 7: Gate-Charge Characteristics 20 0 10s 10 15 20 25 VDS (Volts) Figure 8: Capacitance Characteristics 30 10s RDS(ON) limited 10.0 100s 1ms 10ms DC 1.0 TJ(Max)=150C TC=25C 0.1 TJ(Max)=150C TC=25C 160 Power (W) ID (Amps) 100.0 17 5 2 10 120 80 40 0.0 0 0.01 0.1 1 VDS (Volts) 10 100 0.0001 0.001 0.01 0.1 1 0 10 Pulse Width (s) 18 Figure 10: Single Pulse Power Rating Junction-toCase (Note F) Figure 9: Maximum Forward Biased Safe Operating Area (Note F) 10 5 200 1000.0 Z JC Normalized Transient Thermal Resistance Crss 0 D=Ton/T TJ,PK=TC+PDM.ZJC.RJC In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 40 RJC=5C/W 1 0.1 PD Ton Single Pulse T 0.01 0.00001 0.0001 0.001 0.01 0.1 1 10 100 Pulse Width (s) Figure 11: Normalized Maximum Transient Thermal Impedance (Note F) Rev 3: Mar. 2011 www.aosmd.com Page 4 of 6 AON7400A TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 100 30 Power Dissipation (W) IAR (A) Peak Avalanche Current TA=25C TA=150C TA=100C TA=125C 25 20 15 10 5 0 10 1 0 10 100 1000 Time in avalanche, tA ( s) Figure 12: Single Pulse Avalanche capability (Note C) 25 50 75 100 125 150 TCASE (C) Figure 13: Power De-rating (Note F) 50 10000 40 1000 Power (W) Current rating ID(A) TA=25C 30 20 17 5 2 10 100 10 10 1 0.00001 0 0 25 50 75 100 125 0.001 0.1 10 1000 0 18 150 TCASE (C) Figure 14: Current De-rating (Note F) Pulse Width (s) Figure 15: Single Pulse Power Rating Junction-toAmbient (Note H) Z JA Normalized Transient Thermal Resistance 10 D=Ton/T TJ,PK=TA+PDM.ZJA.RJA 1 In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse RJA=75C/W 40 0.1 PD 0.01 Single Pulse Ton T 0.001 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 Pulse Width (s) Figure 16: Normalized Maximum Transient Thermal Impedance (Note H) Rev 3: Mar. 2011 www.aosmd.com Page 5 of 6 AON7400A Gate Charge Test Circuit & Waveform Vgs Qg 10V + + Vds VDC - Qgs Qgd VDC - DUT Vgs Ig Charge Resistive Switching Test Circuit & Waveforms RL Vds Vds 90% + Vdd DUT Vgs VDC - Rg 10% Vgs Vgs t d(on) tr t d(off) t on tf toff Unclamped Inductive Switching (UIS) Test Circuit & Waveforms L 2 E AR = 1/2 LIAR Vds BVDSS Vds Id + Vdd Vgs Vgs I AR VDC - Rg Id DUT Vgs Vgs Diode Recovery Test Circuit & Waveforms Q rr = - Idt Vds + DUT Vds Isd Vgs Ig Rev 3: Mar. 2011 Vgs L Isd + Vdd t rr dI/dt I RM Vdd VDC - IF Vds www.aosmd.com Page 6 of 6