6GK7242-7KX30-0XE0 - Siemens

_________________

TS 

Gateway

_________________

__________

_________________

Preface

Application and properties

Installation, commissioning

and operation 2

SIMATIC NET

Configuration

Telecontrol

Examples of the

configuration data of SMS

gateway providers

TS Gateway

References

Operating Instructions

Training, Service & Support

09/2012

C79000-G8976-C257-03

Siemens AG

Industry Sector

Postfach 48 48

90026 NÜRNBERG

GERMANY

Order number: C79000-G8976-C257

Ⓟ 10/2012 Technical data subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that age can result if proper precautions are not taken. property dam

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by personnel qualified for the specific

task in accorda relevant documentation, in particular its warning notices and safety instructions.

Qualifi ble of identifying risks and

Proper use o ducts

nce with the

ed personnel are those who, based on their training and experience, are capa

avoiding potential hazards when working with these products/systems.

f Siemens pro

Note the following:

WARNING

roducts and components from other manufacturers are used, these must be recommended

ved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If p

or appro

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

remaining trademarks in this publication

ose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer o

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

All names identified by ® are registered trademarks of Siemens AG. The

may be trademarks wh

f Liability

Preface

Purpose of this documentation

This manual supports you during the configuration, installation, commissioning and operation

of the TS Gateway application.

Validity of the documentation

This manual applies to the following software versions:

TS Gateway version V2.0 service pack 1

New in this release

● New software version V2.0 service pack 1

● Editorial revision

Replaced documentation

This manual replaces the manual release 07/2011.

Required experience

To be able to configure and operate the system described in this document, you require

experience of the following products, systems and technologies:

● SIMATIC S7

● SINAUT / Telecontrol

● IP-based communication

You will find further reading in the References in this manual.

Further information on the Internet

You will find further information on the Siemens telecontrol products such as the latest

information, manuals, FAQs or software updates on the Internet on the pages of Siemens

Automation Customer Support under the following entry ID:

45605894 (http://support.automation.siemens.com/WW/view/en/45605894)

There select the required information under "Entry type" (for example "Updates", "Manuals",

"FAQs" etc.).

TS Gateway

Operating Instructions, 09/2012, C79000-G8976-C257-03 3

Preface

TS Gateway

4 Operating Instructions, 09/2012, C79000-G8976-C257-03

TeleService example of an application on the Internet

An example of an application for TeleService access from an engineering station via the

Internet to an S7 station with a CP 1242-7 can be found on the Internet on the pages of

Siemens Automation Customer Support under the following entry ID:

56720905 (http://support.automation.siemens.com/WW/view/en/56720905)

Table of contents

...................................................................................................................... 3

1 Application a

1.1 Pro ...............................................................................................7

1.2 Configuration examples .................................................................................................................9

and operation ............................................................................................... 13

2.1 Co .......................................................13

2.2 Ch .............................................................................14

2.3 Main and substitute TeleService gateway ...................................................................................15

up SMS for the CP 1242-7 ................................................................................................16

2.5 ......................................................................16

3 Conf ........................................................................................... 19

3.1 The Configuration and Monitoring Tool (CMT) ............................................................................19

MT..........................................................................................................................19

3.3 La .............................................................22

3.4 Menu bar......................................................................................................................................23

elp...................................................................................................................................25

3.6 Se ..25

3.7 ring projects ................................................................................................28

3.8 .......................................................................................................31

3.9 ...........................................................................................35

A Examples of ........................................... 39

B References .............................................................................................................................................. 41

.............................................................................................................. 43

Glossary .... .... 45

Index.......... 49

Preface ................................

nd properties ......................................................................................................................... 7

perties........................................

2 Installation, commissioning

mpatible operating systems for the application................

anging port and network settings ...............

2.4 Wake-

Overview of the passwords....................................

iguration ................................................

3.2 Starting the C

yout of the window ......................................................

3.5 Online h

tting up users and administrators ..........................................................................................

Creating and configu

Settings .................................

Configuring SMS gateway providers

the configuration data of SMS gateway providers ....................

C Training, Service & Support.......

..........................................................................................................................................

..............................................................................................................................................

TS Gateway

Operating Instructions, 09/2012, C79000-G8976-C257-03 5

Table of contents

TS Gateway

6 Operating Instructions, 09/2012, C79000-G8976-C257-03

Application and properties 1

.1 1Properties

Use o Gat

What Tele

● Configurations without a telecontrol server

In configurations without a telecontrol server, a TeleService gateway is required for

TeleService via GPRS.

f TS eway

TS Gateway is an application used for TeleService connections via GPRS with remote

SIMATIC stations of the type S7-1200.

is a Service gateway?

A TeleService gateway is a PC on which the "TS Gateway" software is installed.

The TeleService gateway is not configured in STEP 7.

What functions does the TeleService gateway provide?

The TeleService gateway has the following functions:

● Switching station

The TeleService gateway is a PC in the network that serves as the intermediary between

the engineering station and remote S7 station.

Since a firewall is normally closed for connection requests from the outside, a switching

station between the remote station and the engineering station is required. This switching

station can be a telecontrol server or, if there is no telecontrol server in the configuration,

a TeleService gateway. The switching station directs the messages via a tunnel through

the firewall. This allows access by the engineering station connected to a LAN to the S7-

1200 via a router and via the APN of the network provider.

● Configuration of the SMS gateway provider

With the help of TS Gateway, SMS gateway providers are configured that are necessary

for the sending of wake-up SMS messages to the remote S7 stations.

Configuration with TeleService gateway

A TeleService gateway is intended for the following telecontrol systems in which TeleService

is used with GPRS:

TS Gateway

Operating Instructions, 09/2012, C79000-G8976-C257-03 7

Application and properties

1.1 Properties

TS Gateway

8 Operating Instructions, 09/2012, C79000-G8976-C257-03

● Configurations with telecontrol server

In configurations in which a second path needs to be established for TeleService via

GPRS alongside the telecontrol server, a TeleService gateway can be used.

This can, for example, be the case when certain people, groups or companies should not

operate TeleService via the telecontrol server or when access to the stations for

TeleService needs to be set up independent of the telecontrol server.

Range of performance of a TS Gateway

● Number of simultaneous TeleService connections: 1

Note

TS Gateway only for TeleService

TS Gateway is used only for the "TeleService" function via GPRS. No connections to the

remote stations can be monitored and no process data can be transferred.

Main and substitute TeleService gateway

If the requirements for availability are higher, you can install TS Gateway as the main or

substitute gateway. If the connection via the main system cannot be established, you can

establish the TeleService connection via the substitute system. In terms of the range of

functions, both systems are identical and do not monitor each other.

Requirements for TeleService with the TeleService gateway

The following requirements must be met for TeleService via a TeleService gateway:

● Engineering station connected to a LAN or with Internet access

The engineering Station on which TeleService will be operated via GPRS requires STEP

7, version V11.0 SP1 or higher. For STEP 7 V11.0 SP1, support package "CP 1242-7"

(HSP0003001) is also required.

TeleService is started in the STEP 7 project that contains the remote station with the CP

1242-7.

● SIMATIC S7-1200

– CPU with firmware version as of V2.0

– Communications processor CP 1242-7

● PC for the TeleService gateway with:

– DVD drive

– Connection to LAN or Internet access for connecting to the engineering station

– Internet access for connecting to the remote S7 station

– Installation of the "TS Gateway" application

The software ships with the CP 1242-7 (see product DVD).

Application and properties

1.2 Configuration examples

TS Gateway

Operating Instructions, 09/2012, C79000-G8976-C257-03 9

1.2 Configuration examples

2-7, TeleService via GPRS is always via the In

GSM network.

The following figures show the typical configurations for the use of the TeleService gateway.

Installation of TS Gateway on the computer of the engineering Station

With an S7-1200 with CP 124 ternet and the

6WDWLRQ

6ಣZLWK

&3ಣ

(QJLQHHULQJVWDWLRQ

ZLWK67(3

'6/URXWHU

,QWHUQHW

7HOH6HUYLFHJDWHZD\

*356

,QGXVWULDO(WKHUQHW

ure 1-1 Installation of TS Gateway on the computer of the engineering Station

this case, the "TS Gateway" application is installed on the engineering Station.

Fig

Application and properties

1.2 Configuration examples

TS Gateway

10 Operating Instructions, 09/2012, C79000-G8976-C257-03

Installation of TS Gateway on a separate computer

6WDWLRQ

6ಣZLWK

&3ಣ

(QJLQHHULQJVWDWLRQ

ZLWK67(3

'6/URXWHU

,QWHUQHW

7HOH6HU YLFHJDWHZD\

*356

,QGXVWULDO(WKHUQHW

Figure 1-2 Installation of TS Gateway on a separate computer

ineering Station but on a

ay are connected via an

In this case, the "TS Gateway" application is not installed on the eng

separate computer. The engineering station and TeleService gatew

Intranet.

Application and properties

1.2 Configuration examples

TS Gateway

Operating Instructions, 09/2012, C79000-G8976-C257-03 11

ervice vi ing station TeleS a a local and a remote engineer

6WDWLRQ

6ಣZLWK

&3ಣ

(QJLQHHULQJVWDWLRQ

ZLWK67(3

'6/URXWHU

,QWHUQHW

7HOH6HUYLFHJDWHZD\

(QJLQHHULQJVWDWLRQ

ZLWK67(3

'6/URXWHU

*356

,QGXVWULDO(WKHUQHW

Figure 1-3 TeleService via a local and a remote engineering station

In this configuration, TeleService can be operated from two engineering stations:

● A central engineering station connected to the TeleService gateway via an intranet.

The connection between the engineering station and S7 station is via the TeleService

gateway, the Internet and the GSM network.

● A remote engineering station connected to the TeleService gateway via the Internet.

The connection between the engineering station and S7 station is via the Internet to the

TeleService gateway and from there further via the Internet and the GSM network.

Application and properties

1.2 Configuration examples

TS Gateway

12 Operating Instructions, 09/2012, C79000-G8976-C257-03

Installation, commissioning and operation

2.1 Compatible operating systems for the application

Compatible operating systems

the application can run on a PC with one of the following operating systems:

● Microsoft Windows 7 Professional 32-bit + Service Pack 1

● Microsoft Windows 7 Enterprise 32-bit + Service Pack 1

● Microsoft Windows 7 Ultimate 32-bit + Service Pack 1

● Microsoft Windows Server 2008 32-bit + Service Pack 2

Firewall settings (ports)

Just as with any computer connected to the Internet or to another IP network, the

TeleService gateway should be protected at least by the firewall of the operating system

and/or the connected router against attacks from the connected network.

Remember that during installation of the system, several ports need to be opened and other

changes need to be made in your system. These settings are displayed during installation.

You can print these settings during the installation or save them in a log file.

Note

Response to a deactivated firewall

If the firewall is deactivated during installation, the necessary incoming and outgoing rules

will not be created. In this case, no warning is output.

Commissioning the TeleService gateway

1. Set up the PC according to the documentation that ships with the PC.

2. Connect up the following connectors on the PC:

– Monitor, keyboard, mouse

– Power supply

– Local area network if the engineering station is connected via a LAN.

– Internet

Note the information from the network provider and the manufacturer of the router

3. Turn on the PC.

TS Gateway

Operating Instructions, 09/2012, C79000-G8976-C257-03 13

Installation, commissioning and operation

2.2 Changing port and network settings

TS Gateway

14 Operating Instructions, 09/2012, C79000-G8976-C257-03

4. Set up the following access:

– Local LAN connection

– Internet access

5. Insert the product DVD that ships with the CP 1242-7 in the DVD drive.

6. In the file management of the PC, an open the DVD root directory > folder "TS Gateway".

7. Start the installation by double clicking on the "setup.exe" file.

The installation of the software begins automatically. A wizard guides you through the

remaining steps in installation.

Figure 2-1 Window of the installation wizard of TS Gateway

2.2 Changing port and network settings

Network settings

To ensure that the system operates correctly, the following settings must be made:

1. Open the following dialog on the TeleService gateway:

"Network and Internet" > "Network and Sharing Center" > "Advanced sharing settings"

2. Turn on "Network discovery" for both networks "Home or Work" and "Public".

Opening changed ports

If you change port numbers, you will need to open the ports used in the router or using the

functions of the operating system.

Installation, commissioning and operation

2.3 Main and substitute TeleService gateway

TS Gateway

Operating Instructions, 09/2012, C79000-G8976-C257-03 15

ir significance and the

● Listener port for stations of the type S7-1200 + CP 1242-7

The port must be opened for communication with the engineering station and with remote

stations of the type S7-1200 with CP 1242-7.

● Port of the database server

atabase server for TCP connections with CMT client PCs

section Settings (Page 31) >

2.3

Below you will find the ports of TS Gateway along with the

numbers:

default

Default port number: 55097

Port of the d

Default port number: 26865

You can change the default port numbers in the CMT, refer to

"System configuration".

Main and substitute TeleService gateway

TeleService

ther. In terms of

Configuration of t

sure that the configuration data on the two systems are consistent with each other.

the configuration data twice manually or after configuring

abase of the main system to the substitute system using

f the main system:

Programdata > Siemens > Automation > TCS Basic > Data > "Smsc.sqlite"

t the same location in the file system of the substitute system.

tion data.

tabase server in the configuration of the substitute server

Log files

stitute system have different dynamic characteristics relating to their

s are also copied.

gateway: Main and substitute server

If TS Gateway is installed as the main and substitute TeleService server, two parallel

systems are installed by TS Gateway and these are independent of each o

the range of functions, both systems are identical and do not monitor each other.

he main and substitute server

Make

You can achieve this by entering all

the main system, by copying the dat

operating system tools. Follow the steps outlined below:

1. Copy the database file from the following directory o

2. Insert the database file a

The existing "Smsc.sqlite" file on the substitute system is overwritten.

Copying ensures the consistency of the configura

3. Adapt the addressing of the da

in "Settings".

Since the main and sub

runtime response, the log files have different contents in the database. When you copy th

database, the log file

Installation, commissioning and operation

2.4 Wake-up SMS for the CP 1242-7

TS Gateway

16 Operating Instructions, 09/2012, C79000-G8976-C257-03

2.4 Wake-up SMS for the CP 1242-7

Wake-up SMS

ail. The e-mail is

If the wake-up SMS message is sent from a phone, the number of the phone must be

authorized in the STEP 7 configuration of the receiving CP (refer to "Authorized phone

numbers"). The telephone must support the CLIP function (transfer of its own call number)

and the sending of SMS messages.

The wake-up SMS message is not send extra when a TeleService connection is established,

it is generated automatically by the TeleService gateway.

Depending on the switching TeleService gateway, the following text must be transferred in

the wake-up SMS:

● Text for the wake-up SMS message for establishing a connection via the main

TeleService gateway (TeleService server):

TELESERVICE

TELESERVICE 1

● Text for the wake-up SMS message for establishing a connection via the substitute

TeleService gateway (TeleService serve

The configuration of the TeleService server for the GPRS CP is set in STEP 7 in "Telecontrol

interface > TeleService authorization > 1st or 2nd TeleService server".

Waking the station by a TeleService gateway is achieved by sending an e-m

sent to an SMS gateway via an SMTP server. The SMS gateway converts the e-mail into an

SMS message and transfers this to the station.

The SMS gateway is configured in the CMT of the TeleService gateway, see section

Settings (Page 31).

r):

TELESERVICE 2

2.5 Overview of the passwords

Overview of the p

asswords used

low, you will find an overview of the passwords used on the telecontrol Server /

TeleService gateway.

Installation, commissioning and operation

2.5 Overview of the passwords

TS Gateway

Operating Instructions, 09/2012, C79000-G8976-C257-03 17

System No. Password

Password configuration Password entry

Function

① User pass

administrator

password

CMT of the telecontrol

server / TeleService

gateway (when starting)

Protection of the telecontrol

server / TeleService gateway

against unauthorized access

word / CMT of the telecontrol

server/TeleService

gateway

② Telecontrol pass

n of the CP 1242-7

with the telecontrol server

(protection of the telecontrol

word  CP 1242-7 - Authenticatio

 Station by station in t

CMT of the telecontrol

server/TeleService

gateway

server)

③ TeleService password CP 1242-7 At the start of the

TeleService session on the

Protection from access to the

CP in TeleService

engineering station

④ ssword Project by project in the At the start of the Server pa

(optional) CMT of the telecontrol

server/TeleService

TeleService session on the

engineering station

Protection from access to the

telecontrol server in TeleService

gateway

Other passwords required by the GSM network provider, SMPT server provider or SM

gateway provider are not listed here.

6ಣZLWK

&3ಣ

PRGH&3LQ*356

GLUHFW

7HOH6HU YLFH

JDWHZD\

(QJLQHHULQJVWDWLRQ

ZLWK67(3

7HOHFRQWURO

VHUYHU

6ಣZLWK

&3ಣ

6ಣZLWK

&3ಣ

PRGH&3LQ7HOHFRQWURO 6WDWLRQZLWK/$1FRPPXQLFDWLRQ

RQO\

7HOH6HU YLFH

FRQQHFWLRQ

3URGXFWLYHRU

7HOH6HU YLFH

FRQQHFWLRQ





;

3DVVZRUG

FRQILJXUDWLRQ

3DVVZRUG

HQWU\

Overview of the passwords used (numbered symbols)

Installation, commissioning and operation

2.5 Overview of the passwords

TS Gateway

18 Operating Instructions, 09/2012, C79000-G8976-C257-03

Server password

The server password can only be entered if projects have been created on the TeleService

ay can only establish 1 TeleService connection at any one time.

Note

gateway and a server password was configured there. In all other cases, instead of this, a

default internal system password is used automatically and is accepted by the TeleService

gateway.

Number of TeleService connections

The TeleService gatew

Configuration 3

3.1 The Configuration and Monitoring Tool (CMT)

The Configuration and Monito

The Configur g Tool (CMT) is the programm user interface of TS Gateway

and is used t re the following parameters and settings:

r example por

● Users

MS g

● SMTP

Functions not sup

The CMT of TS Gateway is a special form of the CMT of the "TELECONTROL SERVER

BASIC" (TCSB) software. In the program user interface, it contains several entries that are

not supported by TS Gateway. These entries are identified by the note "Not relevant for TS

Gateway".

3.2

ring Tool (CMT)

ation and Monitorin

o configu

● System settings (fo t numbers)

● S ateway provider

server

ported

Starting the CMT

To start the CMT, select the following program:

Windows Start menu > "SIMATIC" > "TCS Basic" > "Config and Monitoring Tool"

TS Gateway

Operating Instructions, 09/2012, C79000-G8976-C257-03 19

Configuration

3.2 Starting the CMT

TS Gateway

20 Operating Instructions, 09/2012, C79000-G8976-C257-03

ogging on

the program starts, the logon window of the CMT is displayed.

When

Figure 3-1 Logon window of the CMT

1. Enter a configured user name or leave the default user name.

2. Enter the corresponding password.

Note

The information in the drop-down list box "Database server" must not be modified.

3. Click the "Logon" button.

The window of the CMT opens.

The factory-set port numbers of TCSB are listed in the section Changing port and network

settings (Page 14).

Initial logon

The following user data is set in the factory:

User data Default values set in the factory Remark

User name administrator

Password 0000 (four zeros)

Access protection of the system - changing passwords

If you want to protect the system from unauthorized access, you should change the factory-

set password. This procedure is described in the section Setting up users and administrators

(Page 25).

Configuration

3.2 Starting the CMT

TS Gateway

Operating Instructions, 09/2012, C79000-G8976-C257-03 21

name or password

nter a user name that is not configured, an error message is displayed regardle

the password entered. One or a variety of incorrect user names can be entered any nu

of times without the system being locked.

 If the default user name is entered:

word with the default user name (see above) an error

time begins that is extended with each

ave entered a configured user name:

sword along with a configured user name, an error message

ou have a maximum of three attempts to log on correctly with a configured

ter the third incorrect entry of the password, this user is locked out. Only an

administrator can enable the user again.

Entering the wrong user

If you e ss of

mber

Note

Incorrect entry of the password

If you enter an incorrect pass

message is displayed. You can attempt to enter the factory-set password any number of

times to log on with the system.

If you enter an incorrect password, a lock out

attempt to logon with an incorrect password.

 If you h

If you enter an incorrect pas

is displayed. Y

user name. Af

Note

Loss of the administrator password

Note down a newly assigned or modified administrator password and keep this in a safe

place.

If only one administrator is set up, the loss of the administrator password means that no

more administrator tasks can be performed.

ch the system can be reset to the factory-set administrator password. There is no way in whi

Configuration

3.3 Layout of the window

TS Gateway

22 Operating Instructions, 09/2012, C79000-G8976-C257-03

3.3 Layout of the window

Layout of the user interface

The program user interface of the CMT is divided into the following areas:













Figure 3-2 Window la

No. Area / subarea Function

yout of the CMT

The subareas have the following functions:

① Title bar Display of the name of the program

② Menu bar Contains the menus

③ Toolbar Contains icons for individual functions

④System navigation configurable pa ypes

trators, SMS gateway providers).

he individual objects of the selected parameter type are displayed in

the object area.

Displays the structure of the rameter t

(adminis

Configuration

3.4 Menu bar

TS Gateway

Operating Instructions, 09/2012, C79000-G8976-C257-03 23

No. Area / subarea Function

⑤ Object area The following content can be displayed:

 Projects (optional)

 Administrators

 SMS gateway provider

System settings 

The system settings are shown with the menu command

"Options" > "Settings".

⑥ Parameter area Shows the parameters of the object selected in the object area.

The drop-down area "Activated parameters" at the right hand edge of the window is not relevant for

Invalid parameters

If y

che

Inv . If you exit a dialog with invalid data, the

the TeleService gateway.

ou enter parameters in input boxes and these are found to be invalid by the plausibility

ck they are indicated during input with a red frame (see figure).

alid parameters are not stored in the database

invalid configuration data will be discarded.

Figure 3-3 Marking of input boxes with invalid parameters (red frame)

3.4 Menu bar

The menu bar contains the following menus:

"File" menu

The following table shows the menu commands and corresponding functions:

Menu command Function

Activate Transfers the configuration data of the selected project with a consistency

check to the database of TS Gateway if this has not yet been stored.

Activating transfers the configuration data of the entire project to the runtime

system.

Reload Not relevant for TS Gateway

Save Checks whether modified configuration data is consistent and saves it. If the

configuration data is inconsistent, an error message is displayed.

Exit Closes the program.

Configuration

3.4 Menu bar

TS Gateway

24 Operating Instructions, 09/2012, C79000-G8976-C257-03

This menu is used to edit configuration data. You can only edit configuration data if you have

suitable rights for the selected project.

table shows the menu commands and corresponding functions:

Menu command Function

"Edit"

The following

Copy Copies an object or a group of objects to the clipboard.

Paste Inserts an object or a group of objects from the clipboard.

"View" menu

Menu command Function

System variables Not relevant for TS Gateway

The system tags are not displayed in the TeleService gateway but are

transferred from the S7 station to the engineering Station during a TeleService

session.

"Options" menu

This menu is used to configur the TS Gateway system.

have the right to make settings.

Only administrators

Menu command Function

Settings Opens the "Settings" dialog in the object area with the following parameter

ps:

 Gener

Here, terface language of CMT.

 System

ere,

param

 Trace

Not relevant for TS Gateway

 SMTP server

Here, you configure the SMTP server that sends the wake-up SMS sent by

the CMT as an e-mail to the SMS GSM provider. (The e-mail it is converted

to an SMS message there and forwarded to the remote station.)

grou

you can set the user in

configuration

H you configure the system settings and the address and port

eters of the gateway.

levels

Configuration

3.5 Online help

TS Gateway

Operating Instructions, 09/2012, C79000-G8976-C257-03 25

"Help" menu

Menu command Function

Help Opens th n CMT. e o line help of the

About Shows ve o ram. rsi n information of the prog

3.5 Online help

Opening online he

The online help of CMT can be opened with the icon that you will find at the top right of every

pane:

Figure 3-4 Button for opening online help

3.6 Setting up users and administrators

Introduction

Under the "Users" entry in the navigation area, you can, for example, create, configure or

delete other administrators and users as deputies. They can configure the TeleService

gateway.

Creating users is only necessary when certain users, for example, should only be able to

read the data of the system. Otherwise, administrators can configure all projects and SMS

gateway providers.

You can assign users to different projects and assign different rights to the users, see

section Creating and configuring projects (Page 28).

Configuration

3.6 Setting up users and administrators

TS Gateway

26 Operating Instructions, 09/2012, C79000-G8976-C257-03

sers and

eir parameters:

View

If you select the "Users" entry in the navigation area, CMT lists all the entered u

Figure 3-5 View wh "User" entry is

The following parameters are displayed for a selected user:

● "General" parameter group

The following data must be entered when they are created.

of name must be unique throughout the

system.

– Password

The password can be changed later by the logged-on administrator.

– Repeat password

● "Contact information" parameter group

All contact information is optional and can be entered and modified by the relevant

administrator.

– E-mail address

– Call number

– Mobile

– Address

en the selected in the navigation area

– User name

User name the administrator. The user

– First name

– Name

Configuration

3.6 Setting up users and administrators

TS Gateway

Operating Instructions, 09/2012, C79000-G8976-C257-03 27

Create administrators

Create new adminis follows:

1he "Create

A new administra r

2. Configure the admin

Note

Loss of the a

Note down a new odified administrator password and keep this in a safe

place.

If only one admin r the loss of the administrator password means that the

system can no longe ed or modified.

There is no

password.

trators as

. Click t administrator" button.

to is created.

istrator in the parameter area.

dministrator password

ly assigned or m

ist ator is set up,

r be configur

way in which the system can be reset to the factory-set administrator

Deleting administrators

elete an administrator as follows:

1mini be deleted in the object area.

2. ete use

The administrator is deleted.

. Select the ad strator to

Click the "Del r" button.

Configuration

3.7 Creating and configuring projects

TS Gateway

28 Operating Instructions, 09/2012, C79000-G8976-C257-03

3.7 Creating and configuring projects

s" entry is selected in the navigation area View when the "Project

With this selection, the CMT displays the following screen:

Figure 3-6 Object area when the "Projects" entry is selected in the navigation area

The "Projects" tab displays the configuration data of the individual projects in the form of a

Purpose

assigned to a specific SMS gateway

provider. The stations to be accessed via a specific SMS gateway provider are grouped

together in a project. This means that you do not need to change the provider data each

time.

table.

of creating projects

To use the functions of the TeleService gateway, it is not absolutely essential to create

projects.

In larger systems, in which all stations are not accessed via the same SMS gateway

provider, you can create various projects that are then

Configuration

3.7 Creating and configuring projects

TS Gateway

Operating Instructions, 09/2012, C79000-G8976-C257-03 29

A unique project number must be assigned to each CMT project that matches the project

Consistency with the STEP 7 project

Make sure that the project number in the CMT is consistent with the project number of the

CP 1242-7 in the STEP 7 project.

number of the CPs in the STEP 7 project.

Note

The SMS gateway provider is assigned to the project in the parameter area (see below).

Parameters in the object area

● Status

Not relevant for TS Gateway

● Project name

Name of the project

● Project number

Number of the project

●

Creating and deleting projects

Only an adminis

1. s" entry in the navigation area.

with

"> "Activate").

ject with the "Delete" button. If a project has already been

e with "Activate", to delete the project completely, you need click

the

● Project data

Not relevant for TS Gateway

● First terminated connection

Not relevant for TS Gateway

Comment

Comment on the project

trator can

ts as follows

create projects.

Create new projec

Select the "Project

2. Click the "Add" button.

The new project appears in the navigation area and in the object area.

3. Transfer the project to the database by clicking the "Activate" button (or alternatively

the menu command "File

In the same way, you delete a pro

transferred to the databas

"Activate" button again.

Configuration

3.7 Creating and configuring projects

TS Gateway

30 Operating Instructions, 09/2012, C79000-G8976-C257-03

of the parameter area.

he SMS gateway provider you want to assign to this

● Server password

ord for authentication of the engineering station on the TeleService server

s blocked. This can help to prevent data volumes being generated that will lead to

quest

eService connection in the "Establish remote connection" dialog of STEP 7.

– If no server password is entered, STEP 7 works on the basis of a password generated

internally in the system. In this case, when a TeleService connection is requested, no

erver password is entered.

eway, make sure that the server password of the

ical to that of the main gateway.

Configuring projects

You create a configuration in the boxes

● SMS gateway provider

From the drop-down list, select t

project.

Passw

(gateway).

With the server password, free access from engineering stations to the TeleService

server i

costs.

The assignment of a password is optional:

– If the server password is configured, the password must be entered with the re

for a Tel

Note

Substitute server

When installing a substitute gat

substitute gateway is ident

Tabs in the object area

Select a project in the navigation area. The object area displays the following tabs:

● "Connections" tab

Not relevant for TS Gateway

● "TeleService connections to ES" tab

Not relevant for TS Gateway

● "Rights" tab

Here, you can assign specific users to individual projects if users have already been set

up.

Only an administrator can assign rights.

You can assign different rights to the individual users in the project.

Configuration

3.8 Settings

TS Gateway

Operating Instructions, 09/2012, C79000-G8976-C257-03 31

Figure 3-7 Assigning a user to a rights group

One of the following user rights can be assigned to a user within a project:

User right Function

Full access Change Wake up *) Read

View project X X X X

Change

configuration

X X

Assigning SMS

gateway provider

*) The "Wake" right is the sa

ll rights.

Activating project

3.8

me as the "Read" right.

Administrators are not listed here since they always have a

Check the implications of the "Full access", "Change" or "Read" rights. See also section

Setting up users and administrators (Page 25).

Assigning users

You create a configuration in the boxes of the parameter area.

Following configuration, you need to activate the project so that the new data is transferred

to the runtime system.

Settings

Opening the "Set

uted among the following parameter groups:

● General

tings" dialog

Open the "Settings" dialog box using the "Options" > "Settings" menu command. The

possible system settings are distrib

● System configuration

Configuration

3.8 Settings

TS Gateway

32 Operating Instructions, 09/2012, C79000-G8976-C257-03

tion

vant for TS Gateway

●

rs can make the settings for the system.

General

or TS Gateway

ct the required language for the program user interface of

System con

● Trace activa

Not rele

SMTP server

Only administrato

● Change log

Not relevant f

● Language

From the drop-down list, sele

the CMT.

figuration

Figure 3-8 The "Settings" > "System configuration" dialog

Here, you configure the address data of the TeleService gateway and, if it exists, the

substitute gateway.

Configuration

3.8 Settings

TS Gateway

Operating Instructions, 09/2012, C79000-G8976-C257-03 33

uthorized phone number

rvice gateway to establish a

he STEP 7 project

Ps in

telephone numbers under the "Authorized phone number" parameter.

● A

Here, enter the string of numbers that authorizes the TeleSe

connection with the CP.

This number is transferred to the CP with the wake-up SMS message.

Note

Consistency with t

The phone number entered here must be configured in the STEP 7 project of the C

the list of 10

●

e IP address and the ports of the TeleService gateway are configured.

, go to the "Telecontrol Manager" list and

–

Note

cy with the STEP 7 project or block configuration

be configured here is also configured in the STEP 7 project (CP

Telecontrol Manager

Here, th

– If you only install 1 TeleService gateway

select the entry "TeleServiceGateway_1" and configure the parameters.

If you install two gateways (main and substitute gateway, first select the

"TeleServiceGateway_1" entry and configure this.

Then select "TeleServiceGateway_2" and configure the second TeleService gateway.

Consisten

The address data to

1242-7).

The relevant port numbers are preassigned. If necessary you can change these.

The following applies to all ports: The port number must be between 1 025 and 65 535.

following entries:

e computer

bstitute gateway

in the Configuration and Monitoring Tool

following address for the substitute gateway:

– Addre

IP address of the TeleService gateway

Select one of the

- The valid IP address of th

- The entry "localhost"

- The entry "127.0.0.1" for the main gateway

- The entry "127.0.0.2" for the su

Note

Use of the substitute gateway in the CMT

If you want to use the substitute gateway

(CMT), you will need to configure the

127.0.0.1

– MSC Listener port

Not relevant for TS Gateway

– IP-T Listener port

Port for connection requests from stations with CP 1242-7

Configuration

3.8 Settings

TS Gateway

34 Operating Instructions, 09/2012, C79000-G8976-C257-03

Default port number: 55097

– Listener port for OPC

Not relevant for TS Gateway

– TCM control port

Not relevant for TS Gateway

– TCM data port

Not relevant for TS Gateway

● Database server

Not relevant for TS Gateway

Note

After changing and saving the information, a restart is necessary for the changes to take

effect.

SMTP server

of the TeleService gateway is sent as an e-mail. The SMTP

erver forwards the e-mail to the SMS gateway.

In this dialog, you can configure up to two SMTP servers

●

server to which all e-mails are sent.

●

er to which the e-mails are s erver is not obtainable.

s of your SMTP server provider.

● User name

Take the data from the agreement documents of your SMTP server provider.

A wake-up SMS message

Server 1

Main

Server 2

Substitute serv ent if the main s

The following parameters must be configured:

● Mail server

SMTP address of the SMTP server

Take the data from the agreement document

● Password

● E-mail address

Entry of own e-mail address.

Configuration

3.9 Configuring SMS gateway providers

TS Gateway

Operating Instructions, 09/2012, C79000-G8976-C257-03 35

3.9 Configuring SMS gateway providers

ervice gateway sends an e-mail.

n SMS gateway via an SMTP server.

y converts the e-mail into an SMS message and transfers this to the

One of m

To use the functionality of the TeleService gateway, you require at a least one SMS gateway

provider.

If you configure several SMS gateway providers, you can assign different providers to the

If y eway providers, but no projects, the first SMS gateway

ist is always used.

Function

The SMS gateway provider forwards a wake-up SMS message to the remote stations. The

sequence of transmission is as follows:

1. The TeleS

2. The e-mail is sent to a

3. The SMS gatewa

station.

ore SMS gateway providers

various projects

ou configure several SMS gat

provider in the l

Configuration

3.9 Configuring SMS gateway providers

TS Gateway

36 Operating Instructions, 09/2012, C79000-G8976-C257-03

View

Select the "SMS gateway provider" entry in the navigation area.

Figure 3-9 Dialog box

The d in the parameter area.

Identification: Authorize

teway as the sender of the wake-up

D must be configured in the

the sender of the SMS will be

ccep the CP. See also section Settings (Page 31).

Parameter

The c

● Name

way provider

● Ad

SMS gateway provider

for configuring an SMS gateway provider

e data of the SMS gateway providers that have already been created are displayed in the

ject area.

ata of the provider selected is configured

d phone number

To allow the CP 1242-7 to identify the TeleService ga

SMS message, a computer ID is transferred in the e-mail. This I

system settings as an "authorized phone number" before

a ted by

olumns contain the following parameters:

Name of the SMS gate

dress

E-mail address of the

Configuration

3.9 Configuring SMS gateway providers

TS Gateway

Operating Instructions, 09/2012, C79000-G8976-C257-03 37

● Ga

provider is displayed here.

Adding and deleting

ateway provider.

ed SMS gateway providerin the object area.

Configuring the para s of the SMS gateway provider

Parameters and placeholders

Remember that the SMS gateway providers have different requirements for the parameters

of the e-mail. You will find examples in appendix Examples of the configuration data of SMS

gateway providers (Page 39). You will also find the significance of the placeholders <MSG>

teway data

The configured data of the

providers

● "Add" button

Adds a new SMS g

● "Delete" button

Deletes the select

meter

and <SMS-NO> there.

The data of the providers is entered in the parameter area:

provider (can be selected freely).

ocuments of your provider.

cipient

e. The field can also include further job-specific information to allow

● Name

Here, enter the name of the SMS gateway

● Address

E-mail address of the SMS gateway provider.

You will find the address in the agreement d

● Re

Enter a suitable reference here.

With some providers, the text field contains the information indicating to the re

what needs to be don

use of special services of a provider.

ers, the "authorized phone number" is entered here. With some provid

Ask your provider about the reference.

●Text

Enter a suitable text here.

Ask your provider about the tex

Configuration

3.9 Configuring SMS gateway providers

TS Gateway

38 Operating Instructions, 09/2012, C79000-G8976-C257-03

Examples of the configuration data of SMS gateway

providers A

f the configuration data of SMS gateway providers

f the configuration of the SMS gateway

n the CMT. See also section Configuring SMS gateway providers (Page 35).

Yo y provider how to configure the e-mail for the wake-

Table A- 1

SMS network provid ss of the SMS gateway Re text

Examples o

The following table contains several examples o

providers o

u can find out from your SMS gatewa

SMS message.

SMS gateway provider-related e-mail structures

er E-mail addre

provider

Clickatell sms@messaging.clickatell.com (no entry) user:

password:

api_id:

to: <SMS-NO> **

reply:

text:

E-Plus *** il.eplus.de ** <MSG> * <MSG> * <SMS-NO>@smallma

Nethosting24 s@nethosting24.de (no entry) TEXT: Message

DNR: <SMS-NO> **

REPORT:

TRUE/FALSE

TARIFF: SMS type

SNR: Sender

Customer1sm

O2 *** <SMS-NO>@o2online.de ** <MSG> * <MSG> *

Red Oxygen t ** <MSG> * [SENDER]

ID=#Identificationkey

<SMS-NO>@redoxygen.ne

PW=Password

SMS77

#SMS type

#Sender

email2sms@sms77.de <MSG> * #Identificationkey

#<SMS-NO> **

Smskaufen

#<SMS-NO> **

#Sender

<MSG> * T2@smskaufen.com #Identificationkey

#password

Smstrade key

#Sendroute

#Sender#

<SMS-NO>@email2sms.smstrade.de <MSG> * #Identification

T-Mobile *** > * <MSG> * <SMS-NO>@t-mobile-sms.de ** <MSG

Vodafone *** * <SMS-NO>@vodafone-sms.de ** <MSG> * <MSG>

TS Gateway

Operating Instructions, 09/2012, C79000-G8976-C257-03 39

Examples of the configuration data of SMS gateway providers

TS Gateway

40 Operating Instructions, 09/2012, C79000-G8976-C257-03

In he following text:

the CP 1242-7 (Page 16)

In he following text:

n automatically enters the correct SMS number that originates from the CP

co d along with the message of the engineering station.

***

Activating the e-mail address

To receive the e-mail, a personal mobile e-mail address needs to be activated with some

network providers. To do this, send an activation SMS with a short number to your SMS

network provider that you will find in the table below "Activation and deactivation SMS". You

will receive a personal e-mail address via SMS that is normally made up of the phone

number and the gateway name.

To activate your personal mobile e-mail address, send the special activation text to a short

number of your SMS network provider.

You will receive a reply SMS with your personal mobile e-mail address that is made up of

your phone number and the gateway name of your SMS network provider, for example:

0123412345678@providersms.com

You will find examples of activation texts and short numbers of SMS network providers in the

following table.

Note

Check with your network provider whether or not it is necessary to send activation and

deactivation SMS messages. Your network provider will inform you of the texts and short

number.

* <MSG

the "Re" box and/or "Text", enter t

SG>

SB then automatically enters the correct message that is stored in the system and

derstood by the CP 1242-7. (This is the same text that is transferred in a wake-up SMS as

message text.) Wake-up SMS for the

** <SMS-NO>

the "Address", "Re" or "Text" box, enter t

MS-NO>

TCSB the

nfiguration and is transmitte

Activating the e-mail address

e next section.

Table A- 2 Activation and deactivation SMS (examples)

T-Mobile Vodafone E-Plus O2 Germany

Enabling

Send SMS with text to

short number

Text: OPEN

Short number: 8000

Text: OPEN

Short number: 3400

Text: START

Short number: 7676245

Text: +OPEN

Short number: 6245

Deactivating

Send SMS with text to

short number

Text: CLOSE

Number: 8000

Text: CLOSE

Number: 3400

Text: STOP

Number: 7676245

Text: STOP

Number: 6245

Gateway name t-mobile-sms.de vodafone-sms.de smsmail.eplus.de o2online.de

References B

Where to find Siemens documentation

● You will find the order numbers for the Siemens products of relevance here in the

following catalogs:

– SIMATIC NET Industrial Communication / Industrial Identification, catalog IK PI

– SIMATIC Products for Totally Integrated Automation and Micro Automation, catalog

ST 70

You can request the catalogs and additional information from your Siemens

representative.

● You will find SIMATIC NET manuals on the Internet pages of Siemens Automation

Customer Support: Link to Customer Support

(http://support.automation.siemens.com/WW/view/en)

Enter the entry ID of the relevant manual as the search item. The ID is listed below some

of the reference entries in brackets.

As an alternative, you will find the SIMATIC NET documentation on the pages of Product

Support:

10805878 (http://support.automation.siemens.com/WW/view/en/10805878)

Go to the required product group and make the following settings:

"Entry list" tab, Entry type "Manuals / Operating Instructions"

You will find the documentation for the SIMATIC NET products relevant here on the data

medium that ships with some products:

– Product CD / product DVD or

– SIMATIC NET Manual Collection

/1/

SIMATIC NET

CP 1242-7

manual

Siemens AG

Entry ID: 42330276

TS Gateway

Operating Instructions, 09/2012, C79000-G8976-C257-03 41

References

0 /2/

TS Gateway

42 Operating Instructions, 09/2012, C79000-G8976-C257-03

/2/

SIMATIC NET

TELECONTROL SERVER BASIC

Operating Instructions

Siemens AG

Entry ID: 42674775

/3/

SIMATIC NET

TS Gateway

Operating Instructions

Siemens AG

Entry ID: 48548898

Training, Service & Support

the

ation.siemens.com/WW/llisapi.dll?func=cslib.csinfo2&aktprim=99&lang=

Online support

In addition to our product documentation, the comprehensive online information platform

supports you in all aspects of our Service & Support at any time and from any location in

world. You will find this on the Internet at the following address:

(http://support.autom

en)

ation:

● Product information, Product Support, Applications & Tools

● Technical Forum

● Access to other features of our Service & Support offer:

– Technical Consulting

–

Phone: +49 (0)911 895 7444

– Spare parts and repairs

Phone: +49 (0)911 895 7448

– ation

–

Expert advice on technical questions with a wide range of de d services

systems.

Phone: +49 (0)911 895 7222

siemens.com l?func fo&lang=en&ob

Here, you will find the following inform

● pport news, newsletter

Engineering Support

Field Service

Optimization and moderniz

Technical Support

mand-optimize

for all our products and

(https://support.automation. /WW/llisapi.dl =cslib.csin

jid=38718979&caller=view)

You will find contact data on the Internet at the following address:

(http://www.automation.siemens.com/partne ome.asp?lang=enr/guiwelc )

TS Gateway

Operating Instructions, 09/2012, C79000-G8976-C257-03 43

Training, Service & Support

TS Gateway

44 Operating Instructions, 09/2012, C79000-G8976-C257-03

SITRAIN - Siemens training for automation and industrial solutions

ntire Siemens product and system

your

solidate training.

w to contact our customer

With over 300 different courses, SITRAIN covers the e

spectrum in the field of automation and drive technology. Advanced training tailored to

needs is also available. In addition to our classic range of courses, we also offer a

combination of various training media and sequences. You can, for example, use self-study

programs on CD-ROM or on the Internet as preparation or to con

You will find detailed information on our training curriculum and ho

consultants at the following Internet address:

(www.siemens.com/sitrain)

Glossary

ex Same interface types of a CPU and a CM are functionally identical.

CMT

Config and Monitoring Tool

Pro tion of the

tel nd monitoring of the connections to the remote stations.

sks that provides the CPU with additional interface

Direct comm

each other without the

GPRS

General Packet Radio Service

Packet-oriented service for IP-based data transmission in GSM networks. GPRS data

packets can also be transferred via the Internet. The data is transmitted using the Internet

protocols TCP/IP or UDP/IP.

GPRS direct (mo

P 1242-7 for direct communication between remote S7 stations via the GSM

s selected when it is known that the communications partner can be

reached using a fixed IP address. This is made possible by the services of the network

provider. No telecontrol server is necessary.

GPRS station

Remote S7 station with a GPRS-compliant communications module

Communications module

Module for communications tasks that is used in an automation system as an interface

pansion of the CPU.

uration

gram user interface of TELECONTROL SERVER BASIC. Used for configura

econtrol server a

Communications processor

Module for expanded communications ta

types or communications options.

unication

With direct communication, the S7 stations communicate directly with

frames needing to be forwarded by a master station or station.

mpare "inter-station communication"

ntext: Telecontrol / SINAUT

de)

Mode of the C

network. This mode i

TS Gateway

Operating Instructions, 09/2012, C79000-G8976-C257-03 45

Glossary

TS Gateway

46 Operating Instructions, 09/2012, C79000-G8976-C257-03

-station communication

n communication, S7 stations communicate with each by having an

the relevant destination node.

INAUT

MCC - Mobile Country Code

→

PLMN

MNC - Mobile Ne

PLMN

Public Land Mobile Network

Worldwide unique identifier of mobile wireless networks. The PLMN is made up of the three-

digit Mobile Country Code (MCC) and the two-or three-digit Mobile Network Code (MNC) of

the network provider.

TCSB

→

TELECONTROL SERVER BASIC

Telecontrol server

PC for monitoring and control of remote S7 stations linked via a public GSM network for

GPRS communication. The telecontrol server is normally a centrally deployed PC with a

connection to the Internet on which the "TELECONTROL SERVER BASIC" application is

installed. The telecontrol server is not configured in STEP 7.

TELECONTROL SERVER BASIC

Software for GPRS communication between remote stations and the central telecontrol

server. Via the integrated OPC server of TCSB, data can be exchanged with the OPC client

of a central control system. TCSB allows TeleService from S7-1200 stations with a

CP 1242-7 via GPRS. Communication can be handled via public networks such as GSM

networks or via the Internet without requiring addressing of the remote S7 stations using

fixed IP addresses.

Telecontrol(mode)

Mode of the CP 1242-7 for GPRS communication between a remote S7 station and the

following partners:

Inter

With inter-statio

intermediary forward the frames to

Compare "direct communication"

Context: Telecontrol / S

twork Code

→

PLMN

Glossary

TS Gateway

Operating Instructions, 09/2012, C79000-G8976-C257-03 47

trol server

ote GPRS stations (inter-station communication)

In communication with other remote GPRS stations, the frames are sent via the

telecontrol server.

eway

ith

TeleService

en the engineering station and remote S7

rol server or a TeleService gateway.

TS Gateway

● Communication with a telecon

● Communication with other rem

TeleService gat

PC in the network as intermediary between the engineering station and remote S7-1200 w

CP 1242-7. The "TS Gateway" software is installed on the PC. TS Gateway is used only for

the "TeleService" function via GPRS. No process data can be transferred with TS Gateway.

The TeleService gateway is not configured in STEP 7.

server

Switching station for data transmission betwe

station. This can be a telecont

Application on a TeleService gateway

Glossary

TS Gateway

48 Operating Instructions, 09/2012, C79000-G8976-C257-03

Index

Activate, 31

Administrator, 29

Administrator password, 21, 27

Authorized phone number, 33, 36

Current information

FAQs, 3

Firewall settings, 1

Invalid parameters

Language selection

Log files, 15

Main gateway, 8

ay, 15, 16

Network settings, 1

Online help, 25

Password

Invalid entry, 21

Overview, 16

Numbers, 14

Opening, 14

Runtime system, 31

S gateway, 16

SMTP server, 34

Substitute gateway, 8

Substitute server, 30

Substitute TeleService gateway, 15, 16

Support package (HSP), 8

TeleService server, 16

TS Gateway, 8

rmissions, 30

, 3 Port numbers, 33

Ports

Help, 25

, 23

Server password, 30

Settings, necessary, 14

, 24, 32

Main TeleService gatew

Manuals, 3

User name:Invalid entry, 21

User pe

Operating system, 13

Rights, 30

Validation, 23

TS Gateway

Operating Instructions, 09/2012, C79000-G8976-C257-03 49

Index

TS Gateway

50 Operating Instructions, 09/2012, C79000-G8976-C257-03

Wake-up SMS, 16