XPress DR / XPress DR-IAP TM TM Industrial Device Servers REMOTELY CONFIGURE, PROGRAM, MONITOR, AND MANAGE: Connect PLCs, drives, process controls, power monitoring equipment, barcode scanners, and other factory floor serial devices. The XPressTM DR and XPress DR-IAP Device Servers enable virtually any industrial device with serial capability to be connected to a new or existing Ethernet network. By encapsulating serial data and transporting it over Ethernet, the XPress DR/DR-IAP establishes virtual serial links over Ethernet. By using these units, limited-distance, point-to-point, direct serial connections can now be extended within the plant, throughout the facility, or across the global enterprise. When used in conjunction with an OPC server, most Windows(R) based HMI, SCADA, and PC-based control applications have full access to information in the connected device. Existing COM-port based Windows(R) applications can access network-enabled devices using Lantronix Com Port Redirector software. Com Port Redirector allows the creation of virtual serial ports, which can be mapped to remote device servers over Ethernet and connected to the XPress DR and XPress DR-IAP. XPress DR / XPress DR-IAP Highlights * Connect enterprise (ERP, MES) systems to factory floor devices without disturbing existing control networks * Allow remote firmware upgrades, saving money and time from manual upgrades * XPress DR-IAP version supports industrial communication protocols * Configurable serial interface supports RS-232, RS-422, or RS-485 * 10Base-T/100Base-TX Ethernet (RJ45) The XPress DR-IAP installable communication drivers allow specific support for various industrial communication protocols. With native support for these protocols, devices that previously allowed only one connection can now support multiple connections simultaneously. Flexible configuration options allow the unit to be set up locally using the serial port, or remotely over Ethernet using Telnet or a common web browser. DeviceInstaller,TM a Windows(R) based configuration software, simplifies installation and configuration, enables access to the Web Manager and Telnet communications, and ping attached devices over the network. Flash memory provides for maintenancefree, non-volatile storage, and allows future system upgrades. Packaged in a rugged DIN-rail mount case and featuring 2000V galvanic isolation, 1500V Ethernet isolation, a wide 0 to 60C operating range, and a 9-30VDC/9-24VAC power input, the XPress DR and XPress DR-IAP are ideal for virtually any industrial application. * Isolated serial and Ethernet ports * UL-approved for hazardous locations Class I, Divsion 2 * RoHS compliant XPress DR / XPress DR-IAP Industrial Device Servers (R) 90 mm (3.54 in) Master/Slave Application Master/Slave Application 35 mm (1.4 in) (PLC) RS-232/ 485 Ethernet Personal Computer (PC) with installed Ethernet adapter Standards: ARP, UDP/IP, TCP/IP, ICMP, SNMP, BOOTP, DHCP, TFTP, Telnet, and HTTP Interface: 10Base-T/100Base-TX Ethernet Connector: RJ45 Installable Application Layer Protocols (XPress DR-IAP only) Indicators * Ready, Fault/Configuration, Activity, Link, Serial Transmit Data, Serial Receive Data Management * SNMP, serial, Telnet, and HTTP (web browser) Isolation * Ethernet: -1500 Vrms from Serial Port -2000 Vrms from Power Input Port * Serial: 2000 Vrms from Power Input Port Packaging * Mounting: DIN-rail (35 mm) * Material: High-impact plastic * Dimensions: 60 x 36 x 90 mm (2.4 x 1.4 x 3.54 in) Agency Approvals * UL, CSA, CE, RCM, VCCI Warranty * 1-Year Limited Warranty Software * DeviceInstaller, a Windows(R) based configuration software, simplifies initial set up and device configuration (available as a free download) Shipping Dimensions * Size: (L x W x H) 187.3 x 228.6 x 111 mm (7.375 x 9.0 x 4.375 in) Programmable Logic Controller (PLC) Note: Serial connections may be attached to either the terminal block or to the RJ45 connector - but not both simultaneously. Programmable Logic Controller (PLC) RS-232 or RS-422/485 RS-232 or RS-422/485 10Base-T/100Base-TX Ethernet Note: Serial connections may be attached to either the terminal block or to the RJ45 connector - but not both simultaneously. 9-30 VDC/9-24 VAC RS-232 or RS-422/485 10Base-T/100Base-TX Ethernet Part Number 9-30 VDC/9-24 VAC XSDRSN-03 XSDRIN-03 Environmental (Operating) * Temperature: 0 to 60C (32 to 140F) * Humidity: 20% to 90% RH, non-condensing Variable Speed Drive RS-232 or RS-422/485 Power * Input: 9 to 30VDC/9-24VAC, 3W maximum * Connector: Screw terminals for power and ground RS-232/ 485 Variable Speed Drive RS-232/ 485 Network Interface * * * * * (PLC) Programmable Logic Controller Serial Interface Interface: RS-232, RS-422, or RS-485 Connector: Screw terminals or RJ45 Data Rates: 300 to 115,200 bps Characters: 7 or 8 data bits Parity: odd, even, none Stop Bits: 1 or 2 Flow Control: Software: XON/XOFF Hardware: RTS/CTS Installable Serial Protocols (XPress DR-IAP only) Programmable Logic Controller RS-232/ 485 Personal Computer (PC) with installed Ethernet adapter Features and Specifications * * * * * * * * * * Variable Speed Drive RS-232/ 485 Variable Speed Drive RS-232/ 485 Ethernet DIN Rail Mount RS-232/ 485 Personal Computer (PC) without Ethernet adapter Ethernet 90 mm (3.54 in) DIN Rail Mount Ethernet Personal Computer (PC) without Ethernet adapter (R) 35 mm (1.4 in) RS-232/ 485 Description XPress DR Industrial Device Server, DIN Rail Mount, Serial Interface (RS-232/RS-422/RS-485 - terminal block or RJ45), 10Base-T/100Base-TX, 9-30VDC/ 9-24VAC, RoHS XPress DR-IAP Industrial Device Server with Installable Industrial Protocols, DIN Rail Mount, Serial Interface (RS-232/RS-422/RS-485 - terminal block or RJ45), 10Base-T/100Base-TX, 9-30VDC/9-24VAC, RoHS Ordering Information Americas Call: 800.422.7055 sales@lantronix.com Buy Online: http://www.lantronix.com NASDAQ: LTRX Asia/Pacific Call: +852 3428.2338 asiapacific_sales@lantronix.com China Call: +86.021.6237.8868 Shanghai@lantronix.com Europe Call: +31 (0) 76.52.3.6.74 4 EMEA@lantronix.com Japan Call: +81.3.6277.8802 japan_sales@lantronix.com (c)Lantronix, Inc. 2016. All rights reserved. Lantronix is a registered trademark and DeviceInstaller is a trademark of Lantronix, Inc. in the U.S. and other countries. All other trademarks and trade names are the property of their respective holders. Specifications subject to change without notice. 910-394 Rev C