XPress DR / XPress DR-IAP Highlights
• Connect enterprise (ERP, MES) systems
to factory floor devices without
disturbing existing control networks
• Allow remote rmware upgrades, saving
money and time from manual upgrades
• XPress DR-IAP version supports
industrial communication protocols
• Congurable serial interface supports
RS-232, RS-422, or RS-485
• 10Base-T/100Base-TX Ethernet (RJ45)
• Isolated serial and Ethernet ports
• UL-approved for hazardous locations
Class I, Divsion 2
• RoHS compliant
The XPress™ DR and XPress DR-IAP Device Servers enable virtually any industrial device with serial
capability to be connected to a new or existing Ethernet network. By encapsulating serial data and
transporting it over Ethernet, the XPress DR/DR-IAP establishes virtual serial links over Ethernet. By using
these units, limited-distance, point-to-point, direct serial connections can now be extended within the plant,
throughout the facility, or across the global enterprise.
When used in conjunction with an OPC server, most Windows® based HMI, SCADA, and PC-based control
applications have full access to information in the connected device. Existing COM-port based Windows®
applications can access network-enabled devices using Lantronix Com Port Redirector software. Com Port
Redirector allows the creation of virtual serial ports, which can be mapped to remote device servers over
Ethernet and connected to the XPress DR and XPress DR-IAP.
The XPress DR-IAP installable communication drivers allow specic support for various industrial
communication protocols. With native support for these protocols, devices that previously allowed only one
connection can now support multiple connections simultaneously.
Flexible conguration options allow the unit to be set up locally using the serial port, or remotely over
Ethernet using Telnet or a common web browser. DeviceInstaller,™ a Windows® based conguration
software, simplies installation and conguration, enables access to the Web Manager and Telnet
communications, and ping attached devices over the network. Flash memory provides for maintenance-
free, non-volatile storage, and allows future system upgrades.
Packaged in a rugged DIN-rail mount case and featuring 2000V galvanic isolation, 1500V Ethernet
isolation, a wide 0° to 60°C operating range, and a 9-30VDC/9-24VAC power input, the XPress DR and
XPress DR-IAP are ideal for virtually any industrial application.
Connect PLCs, drives, process controls, power monitoring equipment, barcode scanners, and other factory floor
serial devices.
REMOTELY CONFIGURE,
PROGRAM, MONITOR, AND
MANAGE:
Industrial Device
Servers
XPress™ DR / XPress™ DR-IAP
XPress DR / XPress DR-IAP
Features and Specications
Serial Interface ���������������������������������������������������
• Interface: RS-232, RS-422, or RS-485
• Connector: Screw terminals or RJ45
• Data Rates: 300 to 115,200 bps
• Characters: 7 or 8 data bits
• Parity: odd, even, none
• Stop Bits: 1 or 2
• Flow Control:
• Software: XON/XOFF
• Hardware: RTS/CTS
• Installable Serial Protocols (XPress DR-IAP only)
Network Interface ������������������������������������������������
• Standards: ARP, UDP/IP, TCP/IP, ICMP, SNMP, BOOTP,
• DHCP, TFTP, Telnet, and HTTP
• Interface: 10Base-T/100Base-TX Ethernet
• Connector: RJ45
• Installable Application Layer Protocols (XPress DR-IAP only)
Indicators ��������������������������������������������������������
• Ready, Fault/Conguration, Activity, Link, Serial Transmit Data, Serial Receive Data
Management �����������������������������������������������������
• SNMP, serial, Telnet, and HTTP (web browser)
Isolation ����������������������������������������������������������
• Ethernet:
-1500 Vrms from Serial Port
-2000 Vrms from Power Input Port
• Serial: 2000 Vrms from Power Input Port
Power ������������������������������������������������������������
• Input: 9 to 30VDC/9-24VAC, 3W maximum
• Connector: Screw terminals for power and ground
Environmental (Operating) ����������������������������������������
• Temperature: 0° to 60°C (32° to 140°F)
• Humidity: 20% to 90% RH, non-condensing
Packaging ��������������������������������������������������������
• Mounting: DIN-rail (35 mm)
• Material: High-impact plastic
• Dimensions: 60 x 36 x 90 mm (2.4 x 1.4 x 3.54 in)
Agency Approvals ������������������������������������������������
• UL, CSA, CE, RCM, VCCI
Warranty ���������������������������������������������������������
• 1-Year Limited Warranty
Software ���������������������������������������������������������
• DeviceInstaller, a Windows® based conguration software, simplies initial set up
and device conguration (available as a free download)
Shipping Dimensions ���������������������������������������������
• Size: (L x W x H) 187.3 x 228.6 x 111 mm (7.375 x 9.0 x 4.375 in)
Industrial Device
Servers
Americas
Call: 800.422.7055
sales@lantronix.com
Buy Online:
http://www.lantronix.com
NASDAQ: LTRX
Asia/Pacic
Call: +852 3428.2338
asiapacic_sales@lantronix.com
China
Call: +86.021.6237.8868
Shanghai@lantronix.com
Europe
Call: +31 (0) 76.52.3.6.74 4
EMEA@lantronix.com
Japan
Call: +81.3.6277.8802
japan_sales@lantronix.com
Ordering Information
Part Number Description
XSDRSN-03
XPress DR Industrial Device Server, DIN Rail Mount,
Serial Interface (RS-232/RS-422/RS-485 - terminal block
or RJ45), 10Base-T/100Base-TX, 9-30VDC/ 9-24VAC,
RoHS
XSDRIN-03
XPress DR-IAP Industrial Device Server with Installable
Industrial Protocols, DIN Rail Mount, Serial Interface
(RS-232/RS-422/RS-485 - terminal block or RJ45),
10Base-T/100Base-TX, 9-30VDC/9-24VAC, RoHS
©Lantronix, Inc. 2016. All rights reserved. Lantronix is a registered trademark and DeviceInstaller is a trademark of Lantronix, Inc. in the U.S. and other countries. All other trademarks and trade names are the
property of their respective holders. Specications subject to change without notice. 910-394 Rev C
Programmable Logic Controller
(PLC)
Variable Speed Drive
Ethernet
RS-232/
485
RS-232/
485
RS-232/
485
RS-232/
485
Personal Computer (PC) without
Ethernet adapter
Programmable Logic Controller
(PLC)
Variable Speed Drive
Ethernet
Personal Computer (PC) with
installed Ethernet adapter
RS-232 or RS-422/485
RS-232 or RS-422/485
9-30 VDC/9-24 VAC
10Base-T/100Base-TX Ethernet
Note: Serial connections may be
attached to either the terminal block
or to the RJ45 connector – but not
both simultaneously.
Master/Slave Application
90 mm
(3.54 in)
DIN Rail
Mount
35 mm
(1.4 in)
®
Programmable Logic Controller
(PLC)
Variable Speed Drive
Ethernet
RS-232/
485
RS-232/
485
RS-232/
485
RS-232/
485
Personal Computer (PC) without
Ethernet adapter
Programmable Logic Controller
(PLC)
Variable Speed Drive
Ethernet
Personal Computer (PC) with
installed Ethernet adapter
RS-232 or RS-422/485
RS-232 or RS-422/485
9-30 VDC/9-24 VAC
10Base-T/100Base-TX Ethernet
Note: Serial connections may be
attached to either the terminal block
or to the RJ45 connector – but not
both simultaneously.
Master/Slave Application
90 mm
(3.54 in)
DIN Rail
Mount
35 mm
(1.4 in)
®
