28
5
The 2Pro product is an integrated overcurrent/over-
voltage protection device. The RoHS-compliant
component incorporates PolySwitch PPTC (Polymeric
Positive Temperature Coefficient) and metal oxide
varistor technology in a single device to help reduce
board space requirements and component count.
Damage to telephony communications equipment can
be caused by various sources including lightning and
ESD surges, power contact and induction with AC lines.
The 2Pro TM2P-10271 devices help provide current
limiting during overcurrent events, and voltage
clamping during overvoltage events. After a fault
condition is removed and power is cycled, 2Pro devices
will reset so that communications equipment remains
operational.
The 2Pro device helps address the need for resettable
circuit protection devices for use in cost-sensitive PSTN
(Public Switched Telephone Network) and VoIP (Voice over Internet Protocol) telephony equipment. The
widespread use of VoIP gateways in homes and enterprise environments as the primary means of voice delivery
requires the utmost safety and reliability in equipment.
2Pro circuit protection devices help manufacturers comply
with global safety standards, including UL 60950, TIA-968-A, IEC 60950, and ITU-T K.20/K.21. The UL 497A listed
protector also helps provide ESD protection.
Set-top boxes
Security systems
MDF modules
Analog and ISDN linecards
Single device helps reduce component count and
footprint
Helps reduce warranty returns
Helps equipment comply with surge tests per:
TIA-968-A, IEC 60950, ITU-T K.20/K.21
Helps simplify UL 60950 testing
Helps equipment comply with UL 60950
Single overcurrent, overvoltage and ESD protection
device
Resettable overcurrent protection
UL 497A listed protector (#E258475)
RoHS compliant
Cordless telephones
VoIP gateways
Fax machines
Data modems
Benefits Features
Applications
2Pro Devices
29
5
2Pro Devices
mm 12.0 15.0 6.6 6.0 2.5 12.0
inch* (0.47) (0.59) (0.26) (0.24) (0.10) (0.47)
*Rounded off approximation
F
Min Max
E
Nom
D
Min Max
C
Min Max
B
Min Max
A
Min Max
TM2P-10271 0.15 0.30 6.5 14.0 16.0 0.9 3
Overcurrent (terminals 1 2) Performance ratings @ 20°C
IHOLD
(A)
ITRIP
(A)
Resistance
()
Rmin. R max. R1 max*
Part Number
Time toTrip (s)†
@ 1A
T
yp Max
TM2P-10271 270 ± 10% >10 455 0.25
Overvoltage (terminals 2 3)
DC Resistance
@100V
(M)
Part Number
Varistor Voltage
V @ 1mA
DC(V) Tolerance
Maximum Clamping
Voltage @ 25A
(V)
Rated
Wattage
(W)
* Maximum device resistance at 20°C measured 1 hour post trip.
Corresponds to operation below varistor voltages.
(1) (2)
(3)
Electrical Schematic
Test Conditions
Passive aging 60°C, 1000 hours / 85°C, 1000 hours
Humidity aging 85°C, 85% RH, 1000 hours
Active aging 60°C, 90% RH, 60Vdc bias,1000 hours
Thermal shock 125°C, -55°C (10 times)
Solvent resistance MIL-STD-202, Method 215K
Note: Storage conditions: 40°C max., 70% RH max., devices should remain in original sealed bag prior to use.
Devices may not meet specified values if these storage conditions are exceeded.
Lead material Tin-plated copper, 0.33mm2(22AWG), ø0.65mm (0.026in.)
Flammability IEC 695-2-2 Needle flame test for 20s
Soldering characteristics ANSI approved IPC/EIA/JEDEC J-STD-002, Category 3
Solder heat withstand per IEC-STD 68-2-20, Test Tb, Method1A, Condition B, can withstand 10 seconds at 260°C ± 5°C
AC
B
D
F
E
Center to Center
Typ.
(1)(2)(3)
0.1 1 10 100
100
10
1
0.1
0.01
0.001
Time-to-Tri p (Sec)
Short Circuit Current (A)
PPTC only
TM2Pat 600Vac
Electrical Characteristics for 2Pro DevicesTable 2P1
Mechanical Dimensions for 2Pro DevicesTable 2P2
Typical Time-to-Trip at 25˚C for 2Pro DevicesFigure 2P1
Physical Characteristics and Environmental Specifications for 2Pro DevicesTable 2P3
RoHS compliant, ELV compliant
Physical Characteristics
Environmental Specifications
30
5
Part Number Bag Quantity Tape & Reel Quantity Standard Package Part Marking Agency Recognition
TM2P-10271 500 - 10,000 1027 & Batch # UL 497A/File No. E258475
TM2P-10271-2 - 1,000 5,000 1027 & Batch # UL 497A/File No. E258475
Bulk 500 pieces/bag
10,000 pieces/box
Tape & Reel 1,000 pieces/reel
5,000 pieces/box
Packaging and Marking Information for 2Pro DevicesTable 2P4
Ordering Information for 2Pro DevicesTable 2P5
Wave Soldering and Rework Recommendations for 2Pro Devices
Recommended Wave Soldering for Radial-leaded Devices
Soldering temperature profile
Temperature characteristic at component terminal with dual
wave soldering
Rework
If a device is removed from the board, it should be discarded
and replaced with a new device.
300
250
200
150
100
50
0050
10s
245˚C ... 260˚C
10C... 130˚C
Forced cooling
100150200 250
Te m perature (˚C)
Time (s)
Figure 2P2
Description EIA Mark IEC Mark Dimension (mm) Tolerance
Carrier tape width W W 18 -0.5/ +1.0
Hold down tape width W4W05 Minimum
Top distance between tape edges W6W23 Maximum
Sprocket hole position W5W19 -0.5/+0.75
Sprocket hole diameter D0D04 ±0.2
Abcissa to plane (kinked lead)* H0H016 -0.5/0.6
Abcissa to top H1H132.2 Maximum
Overall width w/lead protrusion - C143.2 Maximum
Overall width w/o lead protrusion - C242.5 Maximum
Lead protrusion L1I11.0 Maximum
Protrusion of cut-out L L 11 Maximum
Protrusion beyond hold down tape I2I2Not specified -
Sprocket hole pitch P0P012.7 ±0.3
Pitch tolerance - - 20 consecutive ±1
Tape thickness t t 0.9 Maximum
Tape thickness with splice* t1- 2.0 Maximum
Splice sprocket hole alignment - - 0 ±0.3
Body lateral deviation hh0±0.1
Body tape plane deviation pp0±1.3
Ordanate to component center lead P2P26.35 ±0.7
Lead spacing* F1,F2F1,F22.54 -0.1/+0.4
Reel width w2w 56 Maximum
Reel diameter a d 370 Maximum
Space between flanges w1- 51.2 Maximum
Arbor hole diameter c f 26 ±12.0
Core diameter n h 80 Maximum
Box - - 56/372/372 Maximum
Consecutive missing pieces* - - 3 maximum -
Empty places per reel* - - Not specified -
Note: *Differs from EIA specification.
2Pro devices are available in tape and reel packaging per EIA 468-B standard. See Figures 2P3 and 2P4 for details.
Tape and Reel Specifications for 2Pro DevicesTable 2P6
RoHS compliant, ELV compliant
31
5
2Pro Devices
TM 2P- 10 271 -2
Packaging
Blank : Bulk
-2 : Ta pe & reel
Varistor voltage indicator
The first two digits indicate voltage.
The third digit signifies the power of ten.
For example : 220 : 22 x100=22V
221 : 22 x101=220V
112 : 11 x102=110 0 V
Typical PPTC resistance (ohms)
2Pro Series
Telecom Module
Part Numbering System for 2Pro Devices
Warning :
All information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product
for their application. Tyco Electronics Corporation makes no warranties as to the accuracy or completeness of the information, and disclaims any
liability regarding its use. Tyco Electronics only obligations are those in the Company’s Standard Terms and Conditions of Sale for this product,
and in no case will Tyco Electronics be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse
of the product. Specifications are subject to change without notice. In addition, Tyco Electronics reserves the right to make changes without
notification to Buyer—to materials or processing that do not affect compliance with any applicable specification.
EIA Referenced Taped Component Dimensions for 2Pro DevicesFigure 2P3
Dh
H1P1
W6
W4
H0
H1
C1
C2
F
AB
Reference plane
Direction of unreeling
Cross section A-B
W5
H
W
t
t1
P0F1F2
P2
D0
I2
L
L1
DhDpDp
Reel Dimensions for 2Pro DevicesFigure 2P4
w1
n
a
c
w2
Cross section
Direction of
unreeling
Reel
Type
Upper side
Lower side
Optional shape: Circular or polygonal