TS-1000 1000W True Sine Wave DC-AC Power Inverter series Features : True sine wave output (THD<3%) High surge power up to 2000W High efficiency up to 92% Power ON-OFF switch Standby saving mode can be selected Front panel indicator for operation status Built-in fan ON-OFF control function Protections: Bat. low alarm / Bat. low shutdown / Over voltage / Over temp. / Output short / Input reverse polarity / Overload Application : Home appliance, power tools, office and portable equipment, vehicle and yacht ...etc. 3 years warranty E13 UL458 (for 112/124 type F only) SPECIFICATION TS-1000-112 MODEL NO. TS-1000-124 TS-1000-148 = A, F RATED POWER (Typ.) TS-1000-212 TPTC004 IEC62368-1 (for 212/224/248 only) TS-1000-224 TS-1000-248 = B, C, D 1000W MAXIMUM OUTPUT POWER (Typ.) 1150W for 180 sec. / 1500W for 10 sec. / surge power 2000W for 30 cycles Factory setting set at 110VAC AC VOLTAGE OUTPUT FREQUENCY WAVEFORM 200 / 220 / 230 / 240VAC selectable by setting button S.W 600.1Hz 500.1Hz 50/60Hz selectable by setting button S.W 50/60Hz selectable by setting button S.W Note.6 True sine wave (THD<3%) AC REGULATION (Typ.) 3.0% SAVING MODE (Typ.) Default disabled. Load5W will be changed to standby mode FRONT PANEL INDICATOR Battery voltage level, output load level, saving mode, fault and operation status BAT. VOLTAGE 12V 24V 48V 12V 24V 48V 42 ~ 60VDC 25A 10.5 ~ 15VDC 21 ~ 30VDC 42 ~ 60VDC 100A 50A 25A 89% Open & sealed lead acid 90% 90% 91% 92% 40A*4 11.34% 40A*2 22.54% 20A*2 454% 40A*4 11.34% 40A*2 22.54% 20A*2 454% 10.54% 214% 424% 10.54% 214% 424% VOLTAGE RANGE (Typ.)Note.4,6 10.5 ~ 15VDC DC CURRENT (Typ.) 100A INPUT Factory setting set at 230VAC 100 / 110 / 115 / 120VAC selectable by setting button S.W 21 ~ 30VDC 50A NO LOAD DISSIPATION (Typ.) 6W @ standby saving mode OFF MODE CURRENT DRAW 1mA EFFICIENCY (Typ.) Note.1 88% BATTERY TYPES FUSE BATTERY BAT. LOW ALARM INPUT PROTECTION BAT. LOW SHUTDOWN REVERSE POLARITY By internal fuse open Protection type : Shut down o/p voltage, re-power on to recover; by internal RTH3 detect on heatsink of power diode OUTPUT SHORT OUTPUT PROTECTION OVER LOAD (Typ.) Protection type : Shut down o/p voltage, re-power on to recover 105 ~ 115% load for 180 sec., 115% ~ 150% load for 10 sec. Protection type : Shut down o/p voltage, re-power on to recover GFCI PROCTECTION ENVIRONMENT WORKING TEMP. WORKING HUMIDITY Optional (Only type F) SAFETY & ISOLATION RESISTANCE EMC EMC EMISSION EMC IMMUNITY MTBF OTHERS NOTE None Note.3 0 ~ +40 @ 100% load ; +60 @ 50% load STORAGE TEMP., HUMIDITY VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 70 5 90 5 OVER TEMPERATURE 20% ~ 90% RH non-condensing -30 ~ +70 / -22 ~ +158oF, 10 ~ 95% RH non-condensing 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes IEC62368-1 CB, EAC TP TC 004 approved UL458 (only for "GFCI" receptacle-Type F ), EAC TP TC 004 EAC TP TC 004 Bat I/P - AC O/P:3.0KVAC AC O/P - FG:1.5KVAC AC O/P-FG, Bat I/P-FG:100M Ohms/500VDC / 25/ 70% RH Compliance to FCC class A, EAC TP TC 020 Compliance to EAC TP TC 020 66.9K hrs min. Compliance to EN55032 class A, 72/ 245/ CEE, 95/ 54/ CE, E-Mark, EAC TP TC 020 Compliance to EN61000-4-2,3,8, EAC TP TC 020 MIL-HDBK-217F (25) DIMENSION PACKING 345*184*70mm (L*W*H) 4.3Kg; 2pcs/9.6Kg/1.16CUFT COOLING Loading controlled cooling fan for GFCI receptacle-type F ; Thermostatically controlled cooling fan for others. 1.Efficiency is tested by 750W, linear load at 13V, 26V, 52V input voltage. 2.All parameters not specified above are measured at rated load, 25 of ambient temperature and set to factory setting. 3.Output derating capacity referenced by curve 1. 4.Input derating capacity referenced by curve 2. 5.The tolerance of each voltage value by models is:112/2120.5V;124/2241V;148/2482V 6.THD is tested by 1000W, linear load at 13,26,52V input voltage. 7.The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft). File Name:TS-1000-SPEC 2020-03-10 TS-1000 1000W True Sine Wave DC-AC Power Inverter TS 1000 112 A A :TYPE B :TYPE C :TYPE D :TYPE F :TYPE 12:12VDC Bat. Voltage: 24:24VDC 48:48VDC True sine wave inverter Output: O/P Wattage:1000W 1:110VAC 2:230VAC A B C D F series OUTLET OUTLET OUTLET OUTLET OUTLET AC Output Socket (optional) MODEL NO. TS-1000-112 TS-1000-124 TS-1000-148 TS-1000-212 TS-1000-224 TS-1000-248 Socket type Country TYPE-A TYPE-F TYPE-B TYPE-C TYPE-D Standard USA Optional GFCI Standard EUROPE Optional AUSTRALIA Optional U.K E13 E13 Certificate E13 Derating Curve Mechanical Specification Unit:mm 50.05 28.55 100 10.7 27.2 19.22 80 Chassis Ground LOAD (%) Cat.No.(1GG1HS-212) Wire Range(10-4 AWG Str Cu Soldered Wires) Torque (17.7-26.5 in lb) 70 60 40 Inverter Inverter Inverter Inverter NEG WARNING: POS BATTERY Reverse Polarity Will Damage The Unit. 20 48 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE () CURVE 1 12 Air flow direction 72.5 100 LOAD (%) 80 7 10 60 40 20 10.5VDC 21VDC 42VDC 15VDC 30VDC 60VDC 11.5VDC 23VDC 46VDC (HORIZONTAL) 345 200 BATTERY INPUT VOLTAGE (V) CURVE 2 AC Output Setting ON Status OFF Battery Load Remote port Type-A AC Output Setting ON Status OFF Battery Load Remote port Type-B 171 184 File Name:TS-1000-SPEC 2020-03-10