SPECIFICATION
50A
21 ~ 30VDC
89%
25A
42 ~ 60VDC
90%
50A
21 ~ 30VDC
91%
25A
42 ~ 60VDC
92%
AC VOLTAGE
MAXIMUM OUTPUT POWER (Typ.)
WAVEFORM Note.6
OUTPUT FREQUENCY
AC REGULATION (Typ.)
VOLTAGE RANGE (Typ.)
Note.4,6
EFFICIENCY (Typ.) Note.1
DC CURRENT (Typ.)
INPUT
INPUT
BATTERY
OUTPUT
ENVIRONMENT
FUSE
SAFETY &
EMC
BAT. LOW ALARM
BAT. LOW SHUTDOWN
OVER TEMPERATURE
OUTPUT SHORT
REVERSE POLARITY
GFCI PROCTECTION
PROTECTION
PROTECTION
True sine wave (THD<3%)
100A
10.5 ~ 15VDC
90%
40A*4 40A*2 20A*2
20A*240A*2
±3.0%
10.5 ~ 15VDC
88%
100A
40A*4
90 5℃± ℃
Protection type : Shut down o/p voltage, re-power on to recover; by internal RTH3 detect on heatsink of power diode
Protection type : Shut down o/p voltage, re-power on to recover
70 5℃± ℃
By internal fuse open
Optional (Only type F) None
Compliance to FCC class A,EAC TP TC 020
Compliance to EAC TP TC 020
WORKING TEMP. Note.3
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
SAFETY STANDARDS
0 ~ +40 @ 100% load ; +60 @ 50% load℃℃
20% ~ 90% RH non-condensing
-30 ~ +70 / -22 ~ +158 F, 10 ~ 95% RH non-condensing℃o
IEC62368-1 CB, EAC TP TC 004 approved
Compliance to EN61000-4-2,3,8,EAC TP TC 020
Compliance to EN55032 class A, 72/ 245/ CEE, 95/ 54/ CE, E-Mark,EAC TP TC 020
True sine wave output (THD<3%)
High surge power up to 2000W
High efficiency up to 92%
Power ON-OFF switch
Standby saving mode can be selected
Front panel indicator for operation status
Built-in fan ON-OFF control function
Protections: Bat. low alarm / Bat. low shutdown / Over voltage / Over temp.
/ Output short / Input reverse polarity / Overload
Application : Home appliance, power tools, office and portable
equipment, vehicle and yacht ...etc.
3 years warranty
RATED POWER (Typ.) 1000W
OVER LOAD (Typ.) 105 ~ 115% load for 180 sec., 115% ~ 150% load for 10 sec.
Protection type : Shut down o/p voltage, re-power on to recover
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
Bat I/P - AC O/P:3.0KVAC AC O/P - FG:1.5KVAC
AC O/P-FG, Bat I/P-FG:100M Ohms/500VDC / 25 / 70% RH℃
VIBRATION 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes
■ Features :
OTHERS PACKING
COOLING
4.3Kg; 2pcs/9.6Kg/1.16CUFT
Loading controlled cooling fan for GFCI receptacle-type F ; Thermostatically controlled cooling fan for others.
DIMENSION 345*184*70mm (L*W*H)
NOTE 1.Efficiency is tested by 750W, linear load at 13V, 26V, 52V input voltage.
2.All parameters not specified above are measured at rated load, 25 of ambient temperature and set to factory setting.
℃
3.Output derating capacity referenced by curve 1.
4.Input derating capacity referenced by curve 2.
5.The tolerance of each voltage value by models is:112/212 0.5V;124/224 1V;148/248 2V
→± →± →±
6.THD is tested by 1000W, linear load at 13,26,52V input voltage.
7.The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃
1150W for 180 sec. / 1500W for 10 sec. / surge power 2000W for 30 cycles
11.3 4%±22.5 4%±45 4%±45 4%±22.5 4%±
10.5 4%±21 4%±42 4%±42 4%±21 4%±
11.3 4%±
10.5 4%±
1000W True Sine Wave DC-AC Power Inverter TS-1000 series
File Name:TS-1000-SPEC 2020-03-10
50 0.1Hz 50/60Hz selectable by setting button S.W±
60 0.1Hz 50/60Hz selectable by setting button S.W±
FRONT PANEL INDICATOR
SAVING MODE (Typ.) Default disabled. Load 5W will be changed to standby mode≦
Battery voltage level, output load level, saving mode, fault and operation status
24V 48V 24V 48V
BAT. VOLTAGE 12V12V
NO LOAD DISSIPATION (Typ.) ≦6W @ standby saving mode
OFF MODE CURRENT DRAW ≦1mA
BATTERY TYPES Open & sealed lead acid
200 / 220 / 230 / 240VAC selectable by setting button S.W
100 / 110 / 115 / 120VAC selectable by setting button S.W
Factory setting set at 110VAC Factory setting set at 230VAC
MTBF 66.9K hrs min. MIL-HDBK-217F (25 )℃
EMC IMMUNITY
EMC EMISSION
TS-1000-112 TS-1000-124 TS-1000-148 TS-1000-212 TS-1000-224 TS-1000-248
MODEL NO.
= A, F = B, C, D
E
13
TPTC004 IEC62368-1
(for 212/224/248 only)
UL458
(for 112/124 type F only)
U 458 (L only for "GFCI" receptacle-Type F ), EAC TP TC 004
EAC TP TC 004
Remote port
OFF
ON
Load
Battery
Status
AC Output
Setting
Remote port
Load
Battery
Status
AC Output
Setting
OFF
ON
Type-A
Type-B
CURVE 1
CURVE 2
AMBIENT TEMPERATURE ( )℃
010203040506070
20
40
60
80
100
BATTERY INPUT VOLTAGE (V)
10.5VDC
21VDC
42VDC
11.5VDC
23VDC
46VDC
15VDC
30VDC
60VDC
20
40
60
80
100
(HORIZONTAL)
LOAD (%)
LOAD (%)
File Name:TS-1000-SPEC 2020-03-10
TS-1000 series
True sine wave inverter 12:12VDC
24:24VDCBat. Voltage:
48:48VDC
1:110VAC
2:230VAC
Output:
O/P Wattage:1000W
TS 1000 112 A
28.55
27.2
50.05
19.22
10.7
70
BATTERY
Reverse Polarity Will
Damage The Unit.
NEG POS
Chassis
Ground
WARNING:
Cat.No.(1GG1HS-212)
Wire Range(10-4AWG Str
Cu Soldered Wires)
Torque (17.7-26.5 in lb)
Inverter
Inverter
Inverter
Inverter
10
7
171
184
direction
12
48
200 72.5
345
Air flow
1000W True Sine Wave DC-AC Power Inverter
Unit:mm
Mechanical Specification Derating Curve
Socket type
Country
MODEL NO. TS-1000-212TS-1000-112 TS-1000-224TS-1000-124 TS-1000-248TS-1000-148
Certificate
TYPE-D
U.K
Standard Optional Optional
EUROPE
EEE
TYPE-B
13 13 13
TYPE-C
AUSTRALIA
AC Output Socket (optional)
A :TYPE
B :TYPE
C :TYPE
D :TYPE
F :TYPE
A
B
C
D
F
OUTLET
OUTLET
OUTLET
OUTLET
OUTLET
TYPE-A
Standard Optional
TYPE-F
USA GFCI
