1000 series Toggle switches - metal lever - economy range Distinctive features and specifications UG1006-A Butt action contacts Optional insulated levers (X213 and X490) A ELECTRICAL SPECIFICATIONS * Max. current/voltage rating with resistive load : - silver contacts (A) : 3A 250VAC - 6A 125VAC - 6A 30VDC - silver plated copper contacts (C) : 2A 250VAC * Initial contact resistance : 10 m max. * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 2.000 Vrms 50 Hz min. between terminals 2.500 Vrms 50 Hz min. between terminals and frame * Electrical life : 10.000 cycles at full load MATERIALS * Case : - function 1 : phenolic resin - funct. 6 & 9 : polyamide * Actuator : - brass, nickel plated (1010 and 1020 models) - polyamide (1030 models) * Bushing : brass, nickel plated * Contacts : A : silver C : copper, silver plated GENERAL SPECIFICATIONS * Torque : 1,50 Nm (1.10 Ft.lb) max. applied to nut * Panel thickness : 5 mm (.196) max. * Operating temperature : -20C to +55C ABOUT THIS SERIES Dimensions : first dimensions are in mm while inches are shown as bracketted numbers. Sealing boots are available to protect the switches against dust and water. They are presented in section H. Mounting accessories : standard hardware supplied : - silver contact models : 1 hex nut U166 + 1 knurled nut U411 - copper contact models : 1 hex nut U42 + 1 knurled nut U411 Packaging unit : 25 or 40 pieces depending on model. APEM www.apem.com A-85 1000 series Toggle switches - metal lever - economy range Solder lug and quick-connect terminals - screw terminals Keyway * 2 and 3 positions * Single pole configurations 6.35x0.80 (.25x.031) 4.50 (.177) A 3.00 (.118) O3.00x0.5 SI (.118DIAx0.5 IS) 8.50 (.334) 9.20 (.362) O3.10 (.122DIA) 6.35x0.80 (.25x.031) MODEL STRUCTURE Keyway Solder lug and quick-connect terminals III 6.35 (.25) 12.00 (.472) 14.00 (.551) 22.50 (.886) III 10.50 (.413) OFF O12.00x0.75 SI (.472DIAx0.75 IS) OFF ON ON 1.00 (.039) ON ON ON I 36 28.00 (1.102) 8.50 (.334) 1021 1026 1029 II III 12.00 (.472) 15.00 (.039) Keyway Screw terminals 12.00 (.472) 12.00 (.472) OFF ON ON I 15.00 (.925) III 0.8 (.031) I II18 10.50 (.413) OFF 18 12.00 (.472) ON ON ON III 9.20 (.362) 1011 1016 1019 II 1.00 (.039) I O12.00x0.75 SI (.472DIAx0.75 IS) I 36 12.00 (.472) 22.50 (.886) 6.35 (.25) 14.00 (.551) PANEL CUT-OUT O12.20 (.48DIA) A-86 www.apem.com APEM 1000 series Toggle switches - metal lever - economy range Solder lug and quick-connect terminals - screw terminals CONTACT MATERIALS A C Silver Copper, silver plated A SPECIAL OPTIONS WITH INSULATED LEVER Silver plated copper contacts (C) OFF II - ON O12.00x0.75 SI (.472DIAx0.75 IS) 9.20 (.362) 1.00 (.039) 1031CX213 II 36 10.50 (.413) I I 12.50 (.492) Keyway 12.00 (.472) X213 0.80 (.031) 12.00 (.472) 6.35 (.25) 22.50 (.886) 14.00 (.551) Ground connector U187 compulsory if the panel is not metallic or not connected to ground. Order separately, see section I. Available with silver contacts (A) or silver plated copper contacts (C) O12.00x0.75 SI (.472DIAx0.75 IS) III OFF ON ON 9.20 (.362) ON ON III 10.50 (.413) 1036 X490 1039 X490 II II 36 1.00 (.039) I I 12.50 (.492) Keyway 12.00 (.472) X490 0.80 (.031) 12.00 (.472) 12.00 (.472) 28.00 (1.102) APEM www.apem.com 6.35 (.25) 14.00 (.551) A-87