DATA SH EET
Maintenance type
Supersedes data of October 1996
File under BC Components, BC05
1999 Apr 29
BC COMPONENTS
MKT 368/369
Metallized polyester film capacitors
1999 Apr 29 2
BC Components Maintenance type
Metallized polyester film capacitors MKT 368/369
MKT RADIAL EPOXY LACQUERED TYPE PITCH 10/15/22.5/27.5 mm
Fig.1 Simplified outlines.
handbook, full pagewidth
CBA924
FEATURES
•Low-inductive wound cell of
metallized (PETP) film
•Cell protected by epoxy lacquer
•Radial leads of solder-coated wire
•Resistant to solvents and rinsing
liquids.
APPLICATIONS
•Blocking and coupling
•Bypass and energy reservoir.
DETAIL SPECIFICATION
For more detailed data and test
requirements see
“Type detail
specification HQN-384-02/101”
.
QUICK REFERENCE DATA
DESCRIPTION VALUE
Capacitance range (E12 series) 0.001 to 6.8 µF
Capacitance tolerance ±10%; ±5%
Rated (DC) voltage 63 V; 100 V; 250 V; 400 V; 630 V
Climatic category 55/100/56
Rated temperature 85 °C
Maximum application temperature 100 °C
Tangent of loss angle at 10 kHz 100 ×10−4
Reference specification IEC 60384-2
Performance grade grade 1 (long life)
1999 Apr 29 3
BC Components Maintenance type
Metallized polyester film capacitors MKT 368/369
COMPOSITION OF CATALOGUE NUMBER
TYPE PACKAGING LEAD CONFIGURATION C-TOL 63 V 100 V 250 V 400 V 630 V
368 loose in box
lead length 4.0 mm ±10% 15 25 45 55 65
±5% 16 26 46 56 66
lead length 3.5 mm ±10% 13 23 43 53 63
±5% 17 27 47 57 67
long leads ±10% 11 21 41 51 61
±5% 12 22 42 52 62
taped on reel H = 16.0 mm ±10% 18 28 48 58 68
±5% 19 29 49 59 69
369 loose in box lead length 4.0 mm ±10% 15 25 45 55 65
±5% 16 26 46 56 66
lead length 22.0 mm ±10% 11 21 41 51 61
±5% 12 22 42 52 62
taped on reel H = 18.5 mm ±10% 18 28 48 58 68
±5% 19 29 49 59 69
2222 36. XX XX X
TYPE AND PITCHES
368
10.0 mm
15.0 mm
22.5 mm
27.5 mm
369 10.0 mm
MULTIPLIER
(nF)
0.1 2
13
10 4
100 5
CAPACITANCE
(numerically)
Example:
104 = 10 ×10 = 100 nF
1999 Apr 29 4
BC Components Maintenance type
Metallized polyester film capacitors MKT 368
MKT 368 GENERAL DATA PITCH 10 mm
Specific reference data for the 63 V DC capacitors
Available 63 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
2. H = in-tape height; for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 1 kHz at 10 kHz at 100 kHz
Tangent of loss angle:
0.1 µF<C≤0.47 µF≤75 ×10−4≤130 ×10−4≤300 ×10−4
0.47 µF<C≤1.0 µF≤75 ×10−4≤130 ×10−4−
Rated voltage pulse slope (dU/dt)R at 63 V (DC) 30 V/µs
R between leads, for C ≤0.33 µF at 10 V; 1 minute >15000 MΩ
RC between leads, for C >0.33 µF at 10 V; 1 minute >5000 s
R between interconnecting leads and casing; 10 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 100 V; 1 minute
Withstanding (AC) voltage between leads and case 200 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box
lt=4.0 +1.0/−0.5 mm ±10% 2222 368 15... on request
±5% 2222 368 16... on request
lt=3.5 ±0.5 mm ±10% 2222 368 13... on request
±5% 2222 368 17... on request
lt=19.0 ±4.0 mm ±10% 2222 368 11... on request
±5% 2222 368 12... on request
Taped on reel H =16.0 mm; note 2 ±10% 2222 368 18... on request
±5% 2222 368 19... on request
Fig.3 Outline.
(1) Hole ∅1.0 for dt=0.6 mm.
(2) 0 ≤α<50°.
handbook, full pagewidth
seating plane(1)
CBA070
P
l
lt
h
∅dt
b
A
α
(2)
1999 Apr 29 5
BC Components Maintenance type
Metallized polyester film capacitors MKT 368
URdc =63 V; URac =40 V
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±10%
Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm; A =2.0 +1.0/−0.5 mm
0.22
4.5 ×13.5 ×12.5 0.5
2222 368 15224
0.27 2222 368 15274
0.33 2222 368 15334
0.39 2222 368 15394
0.47 5.0 ×14.0 ×12.5 0.5 2222 368 15474
0.56 2222 368 15564
0.68 5.5 ×14.5 ×12.5 0.6 2222 368 15684
0.82 6.0 ×15.0 ×12.5 0.6 2222 368 15824
1 6.5 ×15.5 ×12.5 0.8 2222 368 15105
1999 Apr 29 6
BC Components Maintenance type
Metallized polyester film capacitors MKT 368
MKT 368 GENERAL DATA PITCH 10/15 mm
Specific reference data for the 100 V DC capacitors
Available 100 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
2. H = in-tape height; for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 1 kHz at 10 kHz at 100 kHz
Tangent of loss angle:
C≤0.1 µF≤75 ×10−4≤130 ×10−4≤225 ×10−4
0.1 µF<C≤0.47 µF≤75 ×10−4≤130 ×10−4≤300 ×10−4
0.47 µF<C≤1.0 µF≤75 ×10−4≤130 ×10−4−
Rated voltage pulse slope (dU/dt)R at 100 V (DC):
P=10 mm 28 V/µs
P=15 mm 20 V/µs
R between leads, for C ≤0.33 µF at 10 V; 1 minute >15000 MΩ
RC between leads, for C >0.33 µF at 100 V; 1 minute >5000 s
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 160 V; 1 minute
Withstanding (AC) voltage between leads and case 200 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box
lt=4.0 +1.0/−0.5 mm ±10% 2222 368 25... on request
±5% 2222 368 26... on request
lt=3.5 ±0.5 mm ±10% 2222 368 23... on request
±5% 2222 368 27... on request
lt=19.0 ±4.0 mm ±10% 2222 368 21... on request
±5% 2222 368 22... on request
Taped on reel H =16.0 mm; note 2 ±10% 2222 368 28... on request
±5% 2222 368 29... on request
Fig.4 Outline.
(1) Hole ∅1.0 for dt=0.6 mm.
Hole ∅1.3 for dt=0.8 mm.
(2) 0 ≤α<50°.
handbook, full pagewidth
seating plane(1)
l
∅dt
P
h
lt
A
CBA071
b
α
(2)
1999 Apr 29 7
BC Components Maintenance type
Metallized polyester film capacitors MKT 368
URdc =100 V; URac =63 V
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±10%
Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm; A =2.0 +1.0/−0.5 mm
0.056
4.0 ×13.0 ×12.5 0.4
2222 368 25563
0.068 2222 368 25683
0.082 2222 368 25823
0.1 2222 368 25104
0.12 2222 368 25124
0.15 2222 368 25154
0.18 4.5 ×13.5 ×12.5 0.5 2222 368 25184
0.22 5.0 ×14.0 ×12.5 0.5 2222 368 25224
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm
0.27 5.0 ×14.0 ×17.5 0.6 2222 368 25274
0.33 2222 368 25334
0.39 2222 368 25394
0.47 5.5 ×14.5 ×17.5 0.7 2222 368 25474
0.56 2222 368 25564
0.68 6.0 ×15.0 ×17.5 0.9 2222 368 25684
0.82 6.5 ×15.5 ×17.5 1.0 2222 368 25824
1 7.5 ×16.5 ×17.5 1.3 2222 368 25105
1999 Apr 29 8
BC Components Maintenance type
Metallized polyester film capacitors MKT 368
MKT 368 GENERAL DATA PITCH 22.5/27.5 mm
Specific reference data for the 100 V DC capacitors
Available 100 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
; taped on reel pitch = 27.5 mm is not available.
2. Length of long leads:
a) lt= 25.0 ±4.0 mm for lead pitch 22.5 mm.
b) lt= 24.0 ±4.0 mm for lead pitch 27.5 mm.
3. H = in-tape height; for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 1 kHz at 10 kHz
Tangent of loss angle:
C>1.0 µF≤75 ×10−4≤150 ×10−4
Rated voltage pulse slope (dU/dt)R at 100 V (DC):
P=22.5 mm 8V/µs
P=27.5 mm 7V/µs
R between leads, for C ≤0.33 µF at 10 V; 1 minute >15000 MΩ
RC between leads, for C >0.33 µF at 100 V; 1 minute >5000 s
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 100 V; 1 minute
Withstanding (AC) voltage between leads and case 200 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box
lt=4.0 +1.0/−0.5 mm ±10% 2222 368 25... on request
±5% 2222 368 26... on request
lt=3.5 ±0.5 mm ±10% 2222 368 23... on request
±5% 2222 368 27... on request
long leads; note 2 ±10% 2222 368 21... on request
±5% 2222 368 22... on request
Taped on reel H =16.0 mm; note 3 ±10% 2222 368 28... on request
±5% 2222 368 29... on request
Fig.5 Outline.
(1) Hole ∅1.3 for dt=0.8 mm.
(2) 0 ≤α<50°.
handbook, full pagewidth
seating plane(1)
l
∅dt
P
h
lt
A
CBA071
b
α
(2)
1999 Apr 29 9
BC Components Maintenance type
Metallized polyester film capacitors MKT 368
URdc =100 V; URac =63 V
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±10%
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm
1.2 6.0 ×18.0 ×26.0 2.5 2222 368 25125
1.5 2222 368 25155
1.8 7.0 ×19.0 ×26.0 3.2 2222 368 25185
2.2 7.5 ×19.5 ×26.0 3.5 2222 368 25225
2.7 8.5 ×21.5 ×26.0 4.1 2222 368 25275
3.3 9.0 ×22.0 ×26.0 4.5 2222 368 25335
Pitch =27.5 ±0.4 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm
3.9 9.0 ×22.0 ×30.0 4.8 2222 368 25395
4.7 10.0 ×23.0 ×30.0 5.5 2222 368 25475
5.6 11.0 ×24.0 ×30.0 6.2 2222 368 25565
6.8 12.0 ×25.0 ×30.0 6.8 2222 368 25685
1999 Apr 29 10
BC Components Maintenance type
Metallized polyester film capacitors MKT 368
MKT 368 GENERAL DATA PITCH 10/15 mm
Specific reference data for the 250 V DC capacitors
Available 250 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
2. H = in-tape height; for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 1 kHz at 10 kHz at 100 kHz
Tangent of loss angle:
C≤0.1 µF≤75 ×10−4≤130 ×10−4≤225 ×10−4
0.1 µF<C≤0.33 µF≤75 ×10−4≤130 ×10−4≤300 ×10−4
Rated voltage pulse slope (dU/dt)R at 250 V (DC):
P=10 mm 70 V/µs
P=15 mm 28 V/µs
R between leads, for C ≤0.33 µF at 100 V; 1 minute >30000 MΩ
RC between leads, for C >0.33 µF at 100 V; 1 minute >10000 s
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 400 V; 1 minute
Withstanding (AC) voltage between leads and case 500 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box
lt=4.0 +1.0/−0.5 mm ±10% 2222 368 45... on request
±5% 2222 368 46... on request
lt=3.5 ±0.5 mm ±10% 2222 368 43... on request
±5% 2222 368 47... on request
lt=19.0 ±4.0 mm ±10% 2222 368 41... on request
±5% 2222 368 42... on request
Taped on reel H =16 mm; note 2 ±10% 2222 368 48... on request
±5% 2222 368 49... on request
Fig.6 Outline.
(1) Hole ∅1.0 for dt=0.6 mm.
Hole ∅1.3 for dt=0.8 mm.
(2) 0 ≤α<50°.
handbook, full pagewidth
seating plane(1)
l
∅dt
P
h
lt
A
CBA071
b
α
(2)
1999 Apr 29 11
BC Components Maintenance type
Metallized polyester film capacitors MKT 368
URdc =250 V; URac =160 V
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±10%
Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm; A =2.0 +1.0/−0.5 mm
0.027 4.0 ×13.0 ×12.5 0.4 2222 368 45273
0.033 2222 368 45333
0.039 2222 368 45393
0.047
4.5 ×13.5 ×12.5 0.5
2222 368 45473
0.056 2222 368 45563
0.068 2222 368 45683
0.082 5.0 ×14.0 ×12.5 0.5 2222 368 45823
0.1 2222 368 45104
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm
0.12 5.0 ×14.0 ×17.5 0.6 2222 368 45124
0.15 2222 368 45154
0.18 5.5 ×14.5 ×17.5 0.7 2222 368 45184
0.22 6.0 ×15.0 ×17.5 0.9 2222 368 45224
0.27 6.5 ×15.5 ×17.5 1.0 2222 368 45274
0.33 7.0 ×16.0 ×17.5 1.2 2222 368 45334
1999 Apr 29 12
BC Components Maintenance type
Metallized polyester film capacitors MKT 368
MKT 368 GENERAL DATA PITCH 22.5/27.5 mm
Specific reference data for the 250 V DC capacitors
Available 250 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
; taped on reel pitch = 27.5 mm is not available.
2. Length of long leads:
a) lt= 25.0 ±4.0 mm for lead pitch 22.5 mm.
b) lt= 24.0 ±4.0 mm for lead pitch 27.5 mm.
3. H = in-tape height; for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 1 kHz at 10 kHz at 100 kHz
Tangent of loss angle:
0.33 µF<C≤0.47 µF≤75 ×10−4≤130 ×10−4≤300 ×10−4
0.47 µF<C≤1.0 µF≤75 ×10−4≤130 ×10−4−
C>1.0 µF≤75 ×10−4≤150 ×10−4−
Rated voltage pulse slope (dU/dt)R at 250 V (DC):
P=22.5 mm 12 V/µs
P=27.5 mm 10 V/µs
R between leads, for C ≤0.33 µF at 100 V; 1 minute >30000 MΩ
RC between leads, for C >0.33 µF at 100 V; 1 minute >10000 s
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 400 V; 1 minute
Withstanding (AC) voltage between leads and case 500 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box
lt=4.0 +1.0/−0.5 mm ±10% 2222 368 45... on request
±5% 2222 368 46... on request
lt=3.5 ±0.5 mm ±10% 2222 368 43... on request
±5% 2222 368 47... on request
long leads; note 2 ±10% 2222 368 41... on request
±5% 2222 368 42... on request
Taped on reel H =16 mm; note 3 ±10% 2222 368 48... on request
±5% 2222 368 49... on request
Fig.7 Outline.
(1) Hole ∅1.3 for dt=0.8 mm.
(2) 0 ≤α<50°.
handbook, full pagewidth
seating plane(1)
l
∅dt
P
h
lt
A
CBA071
b
α
(2)
1999 Apr 29 13
BC Components Maintenance type
Metallized polyester film capacitors MKT 368
URdc =250 V; URac =160 V
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±10%
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm
0.39 5.0 ×17.0 ×26.0 1.8 2222 368 45394
0.47 5.5 ×17.5 ×26.0 2.2 2222 368 45474
0.56 6.0 ×18.0 ×26.0 2.5 2222 368 45564
0.68 6.5 ×18.5 ×26.0 2.8 2222 368 45684
0.82 7.0 ×19.0 ×26.0 3.2 2222 368 45824
1 8.0 ×20.0 ×26.0 3.8 2222 368 45105
Pitch =27.5 ±0.4 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm
1.2 8.0 ×21.0 ×30.0 4.1 2222 368 45125
1.5 9.0 ×22.0 ×30.0 4.8 2222 368 45155
1.8 10.0 ×23.0 ×30.0 5.5 2222 368 45185
2.2 11.0 ×24.0 ×30.0 6.2 2222 368 45225
1999 Apr 29 14
BC Components Maintenance type
Metallized polyester film capacitors MKT 368
MKT 368 GENERAL DATA PITCH 10/15 mm
Specific reference data for the 400 V DC capacitors
Available 400 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
2. H = in-tape height; for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 1 kHz at 10 kHz at 100 kHz
Tangent of loss angle:
C≤0.1 µF≤75 ×10−4≤130 ×10−4≤225 ×10−4
0.1 µF<C≤0.15 µF≤75 ×10−4≤130 ×10−4≤300 ×10−4
Rated voltage pulse slope (dU/dt)R at 400 V (DC):
P=10 mm 110 V/µs
P=15 mm 44 V/µs
R between leads, for C ≤0.33 µF at 100 V; 1 minute >30000 MΩ
RC between leads, for C >0.33 µF at 100 V; 1 minute >10000 s
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 640 V; 1 minute
Withstanding (AC) voltage between leads and case 800 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box
lt=4.0 +1.0/−0.5 mm ±10% 2222 368 55... on request
±5% 2222 368 56... on request
lt=3.5 ±0.5 mm ±10% 2222 368 53... on request
±5% 2222 368 57... on request
lt=19.0 ±4.0 mm ±10% 2222 368 51... on request
±5% 2222 368 52... on request
Taped on reel H =16 mm; note 2 ±10% 2222 368 58... on request
±5% 2222 368 59... on request
Fig.8 Outline.
(1) Hole ∅1.0 for dt=0.6 mm.
Hole ∅1.3 for dt=0.8 mm.
(2) 0 ≤α<50°.
handbook, full pagewidth
seating plane(1)
l
∅dt
P
h
lt
A
CBA071
b
α
(2)
1999 Apr 29 15
BC Components Maintenance type
Metallized polyester film capacitors MKT 368
URdc =400 V; URac =220 V
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±10%
Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm; A =2.0 +1.0/−0.5 mm
0.001
4.5 ×13.5 ×12.5 0.5
2222 368 55102
0.0012 2222 368 55122
0.0015 2222 368 55152
0.0018 2222 368 55182
0.0022 2222 368 55222
0.0027 2222 368 55272
0.0033 2222 368 55332
0.0039 2222 368 55392
0.0047 2222 368 55472
0.0056 2222 368 55562
0.0068 2222 368 55682
0.0082 2222 368 55822
0.01 2222 368 55103
0.012 2222 368 55123
0.015 2222 368 55153
0.018 2222 368 55183
0.022 2222 368 55223
0.027 2222 368 55273
0.033 2222 368 55333
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm
0.039 5.0 ×14.0 ×17.5 0.6 2222 368 55393
0.047 5.5 ×14.5 ×17.5 0.7 2222 368 55473
0.056
5.0 ×14.0 ×17.5 0.6 2222 368 55563
0.068 2222 368 55683
0.082 2222 368 55823
0.1 5.5 ×14.5 ×17.5 0.7 2222 368 55104
0.12 6.0 ×15.0 ×17.5 0.9 2222 368 55124
0.15 6.5 ×15.5 ×17.5 1.0 2222 368 55154
1999 Apr 29 16
BC Components Maintenance type
Metallized polyester film capacitors MKT 368
MKT 368 GENERAL DATA PITCH 22.5/27.5 mm
Specific reference data for the 400 V DC capacitors
Available 400 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
; taped on reel pitch = 27.5 mm is not available.
2. Length of long leads:
a) lt= 25.0 ±4.0 mm for lead pitch 22.5 mm.
b) lt= 24.0 ±4.0 mm for lead pitch 27.5 mm.
3. H = in-tape height; for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 1 kHz at 10 kHz at 100 kHz
Tangent of loss angle:
0.15 µF<C≤0.47 µF≤75 ×10−4≤130 ×10−4≤300 ×10−4
0.47 µF<C≤1.0 µF≤75 ×10−4≤130 ×10−4−
Rated voltage pulse slope (dU/dt)R at 400 V (DC):
P=22.5 mm 20 V/µs
P=27.5 mm 16 V/µs
R between leads, for C ≤0.33 µF at 100 V; 1 minute >30000 MΩ
RC between leads, for C >0.33 µF at 100 V; 1 minute >10000 s
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 640 V; 1 minute
Withstanding (AC) voltage between leads and case 800 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box
lt=4.0 +1.0/−0.5 mm ±10% 2222 368 55... on request
±5% 2222 368 56... on request
lt=3.5 ±0.5 mm ±10% 2222 368 53... on request
±5% 2222 368 57... on request
long leads; note 2 ±10% 2222 368 51... on request
±5% 2222 368 52... on request
Taped on reel H =16 mm; note 3 ±10% 2222 368 58... on request
±5% 2222 368 59... on request
Fig.9 Outline.
(1) Hole ∅1.3 for dt=0.8 mm.
(2) 0 ≤α<50°.
handbook, full pagewidth
seating plane(1)
l
∅dt
P
h
lt
A
CBA071
b
α
(2)
1999 Apr 29 17
BC Components Maintenance type
Metallized polyester film capacitors MKT 368
URdc =400 V; URac =220 V
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±10%
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm
0.18 5.5 ×17.5 ×26.0 2.2 2222 368 55184
0.22 6.5 ×18.5 ×26.0 2.8 2222 368 55224
0.27 6.0 ×18.0 ×26.0 2.5 2222 368 55274
0.33 6.5 ×18.5 ×26.0 2.8 2222 368 55334
0.39 2222 368 55394
0.47 8.0 ×20.0 ×26.0 3.8 2222 368 55474
Pitch =27.5 ±0.4 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm
0.56 7.5 ×20.5 ×30.0 3.8 2222 368 55564
0.68 8.5 ×21.5 ×30.0 4.5 2222 368 55684
0.82 9.5 ×22.5 ×30.0 5.2 2222 368 55824
1 10.5 ×23.5 ×30.0 5.8 2222 368 55105
1999 Apr 29 18
BC Components Maintenance type
Metallized polyester film capacitors MKT 368
MKT 368 GENERAL DATA PITCH 10/15 mm
Specific reference data for the 630 V DC capacitors
Available 630 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
2. H = in-tape height; for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 1 kHz at 10 kHz at 100 kHz
Tangent of loss angle:
C≤0.068 µF≤75 ×10−4≤130 ×10−4≤225 ×10−4
Rated voltage pulse slope (dU/dt)R at 630 V (DC):
P=10 mm 70 V/µs
P=15 mm 70 V/µs
R between leads, for C ≤0.33 µF at 500 V; 1 minute >30000 MΩ
RC between leads, for C >0.33 µF at 500 V; 1 minute >10000 s
R between interconnecting leads and casing; 500 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1008 V; 1 minute
Withstanding (AC) voltage between leads and case 1260 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box
lt=4.0 +1.0/−0.5 mm ±10% 2222 368 65... on request
±5% 2222 368 66... on request
lt=3.5 ±0.5 mm ±10% 2222 368 63... on request
±5% 2222 368 67... on request
lt=19.0 ±4.0 mm ±10% 2222 368 61... on request
±5% 2222 368 62... on request
Taped on reel H =16 mm; note 2 ±10% 2222 368 68... on request
±5% 2222 368 69... on request
Fig.10 Outline.
handbook, full pagewidth
seating plane(1)
l
∅dt
P
h
lt
A
CBA071
b
α
(2)
(1) Hole ∅1.0 for dt=0.6 mm.
Hole ∅1.3 for dt=0.8 mm.
(2) 0 ≤α<50°.
1999 Apr 29 19
BC Components Maintenance type
Metallized polyester film capacitors MKT 368
URdc =630 V; URac =250 V
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±10%
Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm; A =2.0 +1.0/−0.5 mm
0.01 4.5 ×13.5 ×12.5 0.5 2222 368 65103
0.012 5.0 ×14.0 ×12.5 0.5 2222 368 65123
0.015 5.5 ×14.5 ×12.5 0.6 2222 368 65153
0.018 6.0 ×15.0 ×12.5 0.6 2222 368 65183
0.022 6.5 ×15.5 ×12.5 0.8 2222 368 65223
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm
0.027 5.5 ×14.5 ×17.5 0.7 2222 368 65273
0.033 6.0 ×15.0 ×17.5 0.9 2222 368 65333
0.039 6.5 ×15.5 ×17.5 1.0 2222 368 65393
0.047 7.0 ×16.0 ×17.5 1.2 2222 368 65473
0.056 7.5 ×16.5 ×17.5 1.3 2222 368 65563
0.068 8.0 ×17.0 ×17.5 1.4 2222 368 65683
1999 Apr 29 20
BC Components Maintenance type
Metallized polyester film capacitors MKT 368
MKT 368 GENERAL DATA PITCH 22.5/27.5 mm
Specific reference data for the 630 V DC capacitors
Available 630 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
; taped on reel pitch = 27.5 mm is not available.
2. Length of long leads:
a) lt= 25.0 ±4.0 mm for lead pitch 22.5 mm.
b) lt= 24.0 ±4.0 mm for lead pitch 27.5 mm.
3. H = in-tape height; for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 1 kHz at 10 kHz at 100 kHz
Tangent of loss angle:
0.068 µF<C≤0.1 µF≤75 ×10−4≤130 ×10−4≤225 ×10−4
0.1 µF<C≤0.47 µF≤75 ×10−4≤130 ×10−4≤300 ×10−4
Rated voltage pulse slope (dU/dt)R at 630 V (DC):
P=22.5 mm 28 V/µs
P=27.5 mm 24 V/µs
R between leads, for C ≤0.33 µF at 500 V; 1 minute >30000 MΩ
RC between leads, for C >0.33 µF at 500 V; 1 minute >10000 s
R between interconnecting leads and casing; 500 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1008 V; 1 minute
Withstanding (AC) voltage between leads and case 1260 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box
lt=4.0 +1.0/−0.5 mm ±10% 2222 368 65... on request
±5% 2222 368 66... on request
lt=3.5 ±0.5 mm ±10% 2222 368 63... on request
±5% 2222 368 67... on request
long leads; note 2 ±10% 2222 368 61... on request
±5% 2222 368 62... on request
Taped on reel H =16 mm; note 3 ±10% 2222 368 68... on request
±5% 2222 368 69... on request
Fig.11 Outline.
(1) Hole ∅1.3 for dt=0.8 mm.
(2) 0 ≤α<50°.
handbook, full pagewidth
seating plane(1)
l
∅dt
P
h
lt
A
CBA071
b
α
(2)
1999 Apr 29 21
BC Components Maintenance type
Metallized polyester film capacitors MKT 368
URdc =630 V; URac =250 V
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±10%
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm
0.082 6.0 ×18.0 ×26.0 2.5 2222 368 65823
0.1 7.0 ×19.0 ×26.0 3.2 2222 368 65104
0.12 7.5 ×19.5 ×26.0 3.5 2222 368 65124
0.15 8.0 ×21.0 ×26.0 3.8 2222 368 65154
0.18 9.0 ×22.0 ×26.0 4.5 2222 368 65184
0.22 10.0 ×23.0 ×26.0 5.2 2222 368 65 224
Pitch =27.5 ±0.4 mm; dt=0.80 ±0.08 mm; A =2.5 +1.4/−0.5 mm
0.27 10.0 ×23.0 ×30.0 5.5 2222 368 65274
0.33 11.5 ×24.5 ×30.0 6.5 2222 368 65334
0.39 12.5 ×25.5 ×30.0 7.1 2222 368 65394
0.47 14.0 ×27.0 ×30.0 8.2 2222 368 65474
1999 Apr 29 22
BC Components Maintenance type
Metallized polyester film capacitors MKT 369
MKT 369 GENERAL DATA PITCH 10 mm
Specific reference data for the 63 V DC capacitors
Available 63 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
2. H = in-tape height; for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 1 kHz at 10 kHz at 100 kHz
Tangent of loss angle:
0.1 µF<C≤0.47 µF≤75 ×10−4≤130 ×10−4≤300 ×10−4
0.47 µF<C≤1.0 µF≤75 ×10−4≤130 ×10−4−
Rated voltage pulse slope (dU/dt)R at 63 V (DC) 30 V/µs
R between leads, for C ≤0.33 µF at 10 V; 1 minute >15000 MΩ
RC between leads, for C >0.33 µF at 10 V; 1 minute >5000 s
R between interconnecting leads and casing; 10 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 100 V; 1 minute
Withstanding (AC) voltage between leads and case 200 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0 +1.0/−0.5 mm ±10% 2222 369 15... on request
±5% 2222 369 16... on request
lt=22.0 ±4.0 mm ±10% 2222 369 11... on request
±5% 2222 369 12... on request
Taped on reel H =18.5 mm; note 2 ±10% 2222 369 18... on request
±5% 2222 369 19... on request
Fig.12 Outline.
(1) Hole ∅1.0 for dt=0.6 mm.
handbook, full pagewidth
∅1.3
≤1.5
l
lt
h
∅dt
P
seating plane(1)
b
CBA072
1999 Apr 29 23
BC Components Maintenance type
Metallized polyester film capacitors MKT 369
URdc =63 V; URac =40 V
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±10%
Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm
0.22
4.5 ×10.0 ×12.5 0.4
2222 369 15224
0.27 2222 369 15274
0.33 2222 369 15334
0.39 2222 369 15394
0.47 5.0 ×10.5 ×12.5 0.5 2222 369 15474
0.56 2222 369 15564
0.68 5.5 ×11.0 ×12.5 0.5 2222 369 15684
0.82 6.0 ×11.5 ×12.5 0.6 2222 369 15824
1 6.5 ×12.0 ×12.5 0.7 2222 369 15105
1999 Apr 29 24
BC Components Maintenance type
Metallized polyester film capacitors MKT 369
MKT 369 GENERAL DATA PITCH 10 mm
Specific reference data for the 100 V DC capacitors
Available 100 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
2. H = in-tape height; for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 1 kHz at 10 kHz at 100 kHz
Tangent of loss angle:
C≤0.1 µF≤75 ×10−4≤130 ×10−4≤225 ×10−4
C≥0.1 µF≤75 ×10−4≤130 ×10−4≤300 ×10−4
Rated voltage pulse slope (dU/dt)R at 100 V (DC) 28 V/µs
R between leads, for C ≤0.33 µF at 100 V; 1 minute >15000 MΩ
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 160 V; 1 minute
Withstanding (AC) voltage between leads and case 200 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0 +1.0/−0.5 mm ±10% 2222 369 25... on request
±5% 2222 369 26... on request
lt=22.0 ±4.0 mm ±10% 2222 369 21... on request
±5% 2222 369 22... on request
Taped on reel H =18.5 mm; note 2 ±10% 2222 369 28... on request
±5% 2222 369 29... on request
Fig.13 Outline.
handbook, full pagewidth
∅1.3
≤1.5
l
lt
h
∅dt
P
seating plane(1)
b
CBA072
(1) Hole ∅1.0 for dt=0.6 mm.
1999 Apr 29 25
BC Components Maintenance type
Metallized polyester film capacitors MKT 369
URdc =100 V; URac =63 V
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±10%
Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm
0.056
4.0 ×9.5 ×12.5 0.4
2222 369 25563
0.068 2222 369 25683
0.082 2222 369 25823
0.1 2222 369 25104
0.12 2222 369 25124
0.15 2222 369 25154
0.18 4.5 ×10.0 ×12.5 0.5 2222 369 25184
0.22 5.0 ×10.5 ×12.5 0.5 2222 369 25224
1999 Apr 29 26
BC Components Maintenance type
Metallized polyester film capacitors MKT 369
MKT 369 GENERAL DATA PITCH 10 mm
Specific reference data for the 250 V DC capacitors
Available 250 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
2. H = in-tape height; for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 1 kHz at 10 kHz at 100 kHz
Tangent of loss angle:
C≤0.1 µF≤75 ×10−4≤130 ×10−4≤225 ×10−4
Rated voltage pulse slope (dU/dt)R at 250 V (DC) 70 V/µs
R between leads, for C ≤0.33 µF at 10 V; 1 minute >30000 MΩ
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 400 V; 1 minute
Withstanding (AC) voltage between leads and case 500 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0 +1.0/−0.5 mm ±10% 2222 369 45... on request
±5% 2222 369 46... on request
lt=22.0 ±4.0 mm ±10% 2222 369 41... on request
±5% 2222 369 42... on request
Taped on reel H =18.5 mm; note 2 ±10% 2222 369 48... on request
±5% 2222 369 49... on request
Fig.14 Outline.
handbook, full pagewidth
∅1.3
≤1.5
l
lt
h
∅dt
P
seating plane(1)
b
CBA072
(1) Hole ∅1.0 for dt=0.6 mm.
1999 Apr 29 27
BC Components Maintenance type
Metallized polyester film capacitors MKT 369
URdc =250 V; URac =160 V
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±10%
Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm
0.027 4.0 ×9.5 ×12.5 0.4 2222 369 45273
0.033 2222 369 45333
0.039 2222 369 45393
0.047 4.5 ×10.0 ×12.5 0.5
2222 369 45473
0.056 2222 369 45563
0.068 2222 369 45683
0.082 5.0 ×10.5 ×12.5 0.5 2222 369 45823
0.1 2222 369 45104
1999 Apr 29 28
BC Components Maintenance type
Metallized polyester film capacitors MKT 369
MKT 369 GENERAL DATA PITCH 10 mm
Specific reference data for the 400 V DC capacitors
Available 400 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
2. H = in-tape height; for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 1 kHz at 10 kHz at 100 kHz
Tangent of loss angle:
C≤0.1 µF≤75 ×10−4≤130 ×10−4≤225 ×10−4
Rated voltage pulse slope (dU/dt)R at 400 V (DC) 110 V/µs
R between leads, for C ≤0.33 µF at 100 V; 1 minute >30000 MΩ
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 640 V; 1 minute
Withstanding (AC) voltage between leads and case 800 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0 +1.0/−0.5 mm ±10% 2222 369 55... on request
±5% 2222 369 56... on request
lt=22.0 ±4.0 mm ±10% 2222 369 51... on request
±5% 2222 369 52... on request
Taped on reel H =18.5 mm; note 2 ±10% 2222 369 58... on request
±5% 2222 369 59... on request
Fig.15 Outline.
handbook, full pagewidth
∅1.3
≤1.5
l
lt
h
∅dt
P
seating plane(1)
b
CBA072
(1) Hole ∅1.0 for dt=0.6 mm.
1999 Apr 29 29
BC Components Maintenance type
Metallized polyester film capacitors MKT 369
URdc =400 V; URac =220 V
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±10%
Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm
0.001
4.5 ×10.0 ×12.5 0.5
2222 369 55102
0.0012 2222 369 55122
0.0015 2222 369 55152
0.0018 2222 369 55182
0.0022 2222 369 55222
0.0027 2222 369 55272
0.0033 2222 369 55332
0.0039 2222 369 55392
0.0047 2222 369 55472
0.0056 2222 369 55562
0.0068 2222 369 55682
0.0082 2222 369 55822
0.01 2222 369 55103
0.012 2222 369 55123
0.015 2222 369 55153
0.018 2222 369 55183
0.022 2222 369 55223
0.027 2222 369 55273
0.033 2222 369 55333
1999 Apr 29 30
BC Components Maintenance type
Metallized polyester film capacitors MKT 369
MKT 369 GENERAL DATA PITCH 10 mm
Specific reference data for the 630 V DC capacitors
Available 630 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
2. H = in-tape height; for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 1 kHz at 10 kHz at 100 kHz
Tangent of loss angle:
C≤0.1 µF≤75 ×10−4≤130 ×10−4≤225 ×10−4
Rated voltage pulse slope (dU/dt)R at 630 V (DC) 70 V/µs
R between leads, for C ≤0.33 µF at 500 V; 1 minute >30000 MΩ
RC between leads, for C >0.33 µF at 500 V; 1 minute >10000 s
R between interconnecting leads and casing; 500 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1008 V; 1 minute
Withstanding (AC) voltage between leads and case 1260 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0 +1.0/−0.5 mm ±10% 2222 369 65... on request
±5% 2222 369 66... on request
lt=22.0 ±4.0 mm ±10% 2222 369 61... on request
±5% 2222 369 62... on request
Taped on reel H =18.5 mm; note 2 ±10% 2222 369 68... on request
±5% 2222 369 69... on request
Fig.16 Outline.
handbook, full pagewidth
∅1.3
≤1.5
l
lt
h
∅dt
P
seating plane(1)
b
CBA072
(1) Hole ∅1.0 for dt=0.6 mm.
1999 Apr 29 31
BC Components Maintenance type
Metallized polyester film capacitors MKT 369
URdc =630 V; URac =250 V
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±10%
Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm
0.01 4.5 ×10.0 ×12.5 0.4 2222 369 65103
0.012 5.0 ×10.5 ×12.5 0.5 2222 369 65123
0.015 5.5 ×11.0 ×12.5 0.5 2222 369 65153
0.018 6.0 ×11.5 ×12.5 0.6 2222 369 65183
0.022 6.5 ×12.0 ×12.5 0.7 2222 369 65223
