BC COMPONENTS DATA SHEET MKT 368/369 Metallized polyester film capacitors Maintenance type Supersedes data of October 1996 File under BC Components, BC05 1999 Apr 29 BC Components Maintenance type Metallized polyester film capacitors MKT 368/369 MKT RADIAL EPOXY LACQUERED TYPE PITCH 10/15/22.5/27.5 mm handbook, full pagewidth CBA924 Fig.1 Simplified outlines. FEATURES * Low-inductive wound cell of metallized (PETP) film * Cell protected by epoxy lacquer * Radial leads of solder-coated wire * Resistant to solvents and rinsing liquids. APPLICATIONS * Blocking and coupling * Bypass and energy reservoir. QUICK REFERENCE DATA DESCRIPTION Capacitance range (E12 series) 0.001 to 6.8 F Capacitance tolerance 10%; 5% Rated (DC) voltage 63 V; 100 V; 250 V; 400 V; 630 V Climatic category 55/100/56 Rated temperature 85 C Maximum application temperature 100 C Tangent of loss angle at 10 kHz 100 x 10-4 Reference specification IEC 60384-2 Performance grade grade 1 (long life) DETAIL SPECIFICATION For more detailed data and test requirements see "Type detail specification HQN-384-02/101". 1999 Apr 29 VALUE 2 BC Components Maintenance type Metallized polyester film capacitors MKT 368/369 COMPOSITION OF CATALOGUE NUMBER TYPE AND PITCHES MULTIPLIER (nF) 10.0 mm 368 369 15.0 mm 0.1 2 22.5 mm CAPACITANCE 1 3 27.5 mm (numerically) 10 4 100 5 10.0 mm Example: 104 = 10 x 10 = 100 nF 2222 TYPE PACKAGING LEAD CONFIGURATION lead length 4.0 mm loose in box lead length 3.5 mm 368 long leads taped on reel H = 16.0 mm lead length 4.0 mm loose in box 369 lead length 22.0 mm taped on reel 1999 Apr 29 36. H = 18.5 mm XX XX X C-TOL 63 V 100 V 250 V 400 V 630 V 10% 15 25 45 55 65 5% 16 26 46 56 66 10% 13 23 43 53 63 5% 17 27 47 57 67 10% 11 21 41 51 61 5% 12 22 42 52 62 10% 18 28 48 58 68 5% 19 29 49 59 69 10% 15 25 45 55 65 5% 16 26 46 56 66 10% 11 21 41 51 61 5% 12 22 42 52 62 10% 18 28 48 58 68 5% 19 29 49 59 69 3 BC Components Maintenance type Metallized polyester film capacitors MKT 368 MKT 368 GENERAL DATA PITCH 10 mm b l handbook, full pagewidth h seating plane(1) (2) lt P dt A CBA070 (1) Hole 1.0 for dt = 0.6 mm. (2) 0 < 50. Fig.3 Outline. Specific reference data for the 63 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: 0.1 F < C 0.47 F 0.47 F < C 1.0 F Rated voltage pulse slope (dU/dt)R at 63 V (DC) R between leads, for C 0.33 F at 10 V; 1 minute RC between leads, for C > 0.33 F at 10 V; 1 minute R between interconnecting leads and casing; 10 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (AC) voltage between leads and case at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 75 x 10-4 130 x 10-4 130 x 10-4 30 V/s >15000 M >5000 s >30000 M 100 V; 1 minute 200 V; 1 minute 300 x 10-4 - Available 63 V DC versions PACKAGING(1) C-tol DIMENSIONS 10% 5% 10% 5% 10% 5% 10% 5% lt = 4.0 +1.0/-0.5 mm Loose in box lt = 3.5 0.5 mm lt = 19.0 4.0 mm Taped on reel H = 16.0 mm; note 2 FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 368 15... 2222 368 16... 2222 368 13... 2222 368 17... 2222 368 11... 2222 368 12... 2222 368 18... 2222 368 19... ORDERING on request on request on request on request on request on request on request on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 4 BC Components Maintenance type Metallized polyester film capacitors MKT 368 URdc = 63 V; URac = 40 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm; A = 2.0 +1.0/-0.5 mm 0.22 0.27 0.33 2222 368 15224 4.5 x 13.5 x 12.5 2222 368 15274 0.5 2222 368 15334 0.39 0.47 0.56 0.68 2222 368 15394 5.0 x 14.0 x 12.5 0.5 5.5 x 14.5 x 12.5 0.6 2222 368 15474 2222 368 15564 2222 368 15684 0.82 6.0 x 15.0 x 12.5 0.6 2222 368 15824 1 6.5 x 15.5 x 12.5 0.8 2222 368 15105 1999 Apr 29 5 BC Components Maintenance type Metallized polyester film capacitors MKT 368 MKT 368 GENERAL DATA PITCH 10/15 mm b l handbook, full pagewidth seating plane(1) h (2) lt P dt A CBA071 (1) Hole 1.0 for dt = 0.6 mm. Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. Fig.4 Outline. Specific reference data for the 100 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: C 0.1 F 0.1 F < C 0.47 F 0.47 F < C 1.0 F Rated voltage pulse slope (dU/dt)R at 100 V (DC): P = 10 mm P = 15 mm R between leads, for C 0.33 F at 10 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (AC) voltage between leads and case at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 75 x 10-4 75 x 10-4 130 x 10-4 130 x 10-4 130 x 10-4 225 x 10-4 300 x 10-4 - 28 V/s 20 V/s >15000 M >5000 s >30000 M 160 V; 1 minute 200 V; 1 minute Available 100 V DC versions PACKAGING(1) C-tol DIMENSIONS 10% 5% 10% 5% 10% 5% 10% 5% lt = 4.0 +1.0/-0.5 mm Loose in box lt = 3.5 0.5 mm lt = 19.0 4.0 mm Taped on reel H = 16.0 mm; note 2 FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 368 25... 2222 368 26... 2222 368 23... 2222 368 27... 2222 368 21... 2222 368 22... 2222 368 28... 2222 368 29... ORDERING on request on request on request on request on request on request on request on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 6 BC Components Maintenance type Metallized polyester film capacitors MKT 368 URdc = 100 V; URac = 63 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm; A = 2.0 +1.0/-0.5 mm 0.056 2222 368 25563 0.068 0.082 0.1 0.12 2222 368 25683 2222 368 25823 2222 368 25104 2222 368 25124 0.15 0.18 0.22 4.0 x 13.0 x 12.5 0.4 4.5 x 13.5 x 12.5 5.0 x 14.0 x 12.5 0.5 0.5 2222 368 25154 2222 368 25184 2222 368 25224 Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1 1999 Apr 29 5.0 x 14.0 x 17.5 0.6 5.5 x 14.5 x 17.5 0.7 6.0 x 15.0 x 17.5 6.5 x 15.5 x 17.5 7.5 x 16.5 x 17.5 0.9 1.0 1.3 2222 368 25274 2222 368 25334 2222 368 25394 2222 368 25474 2222 368 25564 2222 368 25684 2222 368 25824 2222 368 25105 7 BC Components Maintenance type Metallized polyester film capacitors MKT 368 MKT 368 GENERAL DATA PITCH 22.5/27.5 mm b l handbook, full pagewidth seating plane(1) h (2) lt P dt A CBA071 (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. Fig.5 Outline. Specific reference data for the 100 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: C > 1.0 F Rated voltage pulse slope (dU/dt)R at 100 V (DC): P = 22.5 mm P = 27.5 mm R between leads, for C 0.33 F at 10 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (AC) voltage between leads and case at 1 kHz at 10 kHz 75 x 10-4 150 x 10-4 8 V/s 7 V/s >15000 M >5000 s >30000 M 100 V; 1 minute 200 V; 1 minute Available 100 V DC versions PACKAGING(1) C-tol DIMENSIONS 10% 5% 10% 5% 10% 5% 10% 5% lt = 4.0 +1.0/-0.5 mm Loose in box lt = 3.5 0.5 mm long leads; note 2 Taped on reel H = 16.0 mm; note 3 FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 368 25... 2222 368 26... 2222 368 23... 2222 368 27... 2222 368 21... 2222 368 22... 2222 368 28... 2222 368 29... ORDERING on request on request on request on request on request on request on request on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2. Length of long leads: a) lt = 25.0 4.0 mm for lead pitch 22.5 mm. b) lt = 24.0 4.0 mm for lead pitch 27.5 mm. 3. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 8 BC Components Maintenance type Metallized polyester film capacitors MKT 368 URdc = 100 V; URac = 63 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 1.2 1.5 1.8 2.2 2.7 3.3 2222 368 25125 6.0 x 18.0 x 26.0 2.5 7.0 x 19.0 x 26.0 7.5 x 19.5 x 26.0 8.5 x 21.5 x 26.0 3.2 3.5 4.1 2222 368 25155 2222 368 25185 2222 368 25225 2222 368 25275 9.0 x 22.0 x 26.0 4.5 2222 368 25335 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 3.9 4.7 5.6 6.8 1999 Apr 29 9.0 x 22.0 x 30.0 10.0 x 23.0 x 30.0 11.0 x 24.0 x 30.0 12.0 x 25.0 x 30.0 4.8 5.5 6.2 6.8 2222 368 25395 2222 368 25475 2222 368 25565 2222 368 25685 9 BC Components Maintenance type Metallized polyester film capacitors MKT 368 MKT 368 GENERAL DATA PITCH 10/15 mm b l handbook, full pagewidth seating plane(1) h (2) lt P dt A CBA071 (1) Hole 1.0 for dt = 0.6 mm. Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. Fig.6 Outline. Specific reference data for the 250 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: C 0.1 F 0.1 F < C 0.33 F Rated voltage pulse slope (dU/dt)R at 250 V (DC): P = 10 mm P = 15 mm R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (AC) voltage between leads and case at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 75 x 10-4 130 x 10-4 130 x 10-4 225 x 10-4 300 x 10-4 70 V/s 28 V/s >30000 M >10000 s >30000 M 400 V; 1 minute 500 V; 1 minute Available 250 V DC versions PACKAGING(1) C-tol DIMENSIONS 10% 5% 10% 5% 10% 5% 10% 5% lt = 4.0 +1.0/-0.5 mm Loose in box lt = 3.5 0.5 mm lt = 19.0 4.0 mm Taped on reel H = 16 mm; note 2 FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 368 45... 2222 368 46... 2222 368 43... 2222 368 47... 2222 368 41... 2222 368 42... 2222 368 48... 2222 368 49... ORDERING on request on request on request on request on request on request on request on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 10 BC Components Maintenance type Metallized polyester film capacitors MKT 368 URdc = 250 V; URac = 160 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm; A = 2.0 +1.0/-0.5 mm 0.027 0.033 2222 368 45273 4.0 x 13.0 x 12.5 0.4 2222 368 45333 0.039 2222 368 45393 0.047 2222 368 45473 0.056 2222 368 45563 4.5 x 13.5 x 12.5 0.5 0.068 0.082 0.1 2222 368 45683 5.0 x 14.0 x 12.5 2222 368 45823 0.5 2222 368 45104 Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.12 2222 368 45124 5.0 x 14.0 x 17.5 0.6 0.18 5.5 x 14.5 x 17.5 0.7 2222 368 45184 0.22 6.0 x 15.0 x 17.5 0.9 2222 368 45224 0.15 2222 368 45154 0.27 6.5 x 15.5 x 17.5 1.0 2222 368 45274 0.33 7.0 x 16.0 x 17.5 1.2 2222 368 45334 1999 Apr 29 11 BC Components Maintenance type Metallized polyester film capacitors MKT 368 MKT 368 GENERAL DATA PITCH 22.5/27.5 mm b l handbook, full pagewidth seating plane(1) h (2) lt P (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. dt A CBA071 Fig.7 Outline. Specific reference data for the 250 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: 0.33 F < C 0.47 F 0.47 F < C 1.0 F C > 1.0 F Rated voltage pulse slope (dU/dt)R at 250 V (DC): P = 22.5 mm P = 27.5 mm R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (AC) voltage between leads and case at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 75 x 10-4 75 x 10-4 130 x 10-4 130 x 10-4 150 x 10-4 300 x 10-4 - - 12 V/s 10 V/s >30000 M >10000 s >30000 M 400 V; 1 minute 500 V; 1 minute Available 250 V DC versions PACKAGING(1) C-tol DIMENSIONS 10% 5% 10% 5% 10% 5% 10% 5% lt = 4.0 +1.0/-0.5 mm Loose in box lt = 3.5 0.5 mm long leads; note 2 Taped on reel H = 16 mm; note 3 FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 368 45... 2222 368 46... 2222 368 43... 2222 368 47... 2222 368 41... 2222 368 42... 2222 368 48... 2222 368 49... ORDERING on request on request on request on request on request on request on request on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2. Length of long leads: a) lt = 25.0 4.0 mm for lead pitch 22.5 mm. b) lt = 24.0 4.0 mm for lead pitch 27.5 mm. 3. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 12 BC Components Maintenance type Metallized polyester film capacitors MKT 368 URdc = 250 V; URac = 160 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.39 5.0 x 17.0 x 26.0 1.8 2222 368 45394 0.47 5.5 x 17.5 x 26.0 2.2 2222 368 45474 0.56 6.0 x 18.0 x 26.0 2.5 2222 368 45564 0.68 6.5 x 18.5 x 26.0 2.8 2222 368 45684 0.82 7.0 x 19.0 x 26.0 3.2 2222 368 45824 1 8.0 x 20.0 x 26.0 3.8 2222 368 45105 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 1.2 8.0 x 21.0 x 30.0 4.1 2222 368 45125 1.5 9.0 x 22.0 x 30.0 4.8 2222 368 45155 1.8 10.0 x 23.0 x 30.0 5.5 2222 368 45185 2.2 11.0 x 24.0 x 30.0 6.2 2222 368 45225 1999 Apr 29 13 BC Components Maintenance type Metallized polyester film capacitors MKT 368 MKT 368 GENERAL DATA PITCH 10/15 mm b l handbook, full pagewidth seating plane(1) h (2) lt P dt A CBA071 (1) Hole 1.0 for dt = 0.6 mm. Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. Fig.8 Outline. Specific reference data for the 400 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: C 0.1 F 0.1 F < C 0.15 F Rated voltage pulse slope (dU/dt)R at 400 V (DC): P = 10 mm P = 15 mm R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (AC) voltage between leads and case at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 75 x 10-4 130 x 10-4 130 x 10-4 225 x 10-4 300 x 10-4 110 V/s 44 V/s >30000 M >10000 s >30000 M 640 V; 1 minute 800 V; 1 minute Available 400 V DC versions PACKAGING(1) C-tol DIMENSIONS 10% 5% 10% 5% 10% 5% 10% 5% lt = 4.0 +1.0/-0.5 mm Loose in box lt = 3.5 0.5 mm lt = 19.0 4.0 mm Taped on reel H = 16 mm; note 2 FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 368 55... 2222 368 56... 2222 368 53... 2222 368 57... 2222 368 51... 2222 368 52... 2222 368 58... 2222 368 59... ORDERING on request on request on request on request on request on request on request on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 14 BC Components Maintenance type Metallized polyester film capacitors MKT 368 URdc = 400 V; URac = 220 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm; A = 2.0 +1.0/-0.5 mm 0.001 2222 368 55102 0.0012 2222 368 55122 0.0015 2222 368 55152 0.0018 2222 368 55182 0.0022 2222 368 55222 0.0027 2222 368 55272 0.0033 2222 368 55332 0.0039 2222 368 55392 0.0047 2222 368 55472 0.0056 4.5 x 13.5 x 12.5 0.5 2222 368 55562 0.0068 2222 368 55682 0.0082 2222 368 55822 0.01 2222 368 55103 0.012 2222 368 55123 0.015 2222 368 55153 0.018 2222 368 55183 0.022 2222 368 55223 0.027 2222 368 55273 0.033 2222 368 55333 Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.039 5.0 x 14.0 x 17.5 0.6 0.047 5.5 x 14.5 x 17.5 0.7 2222 368 55393 2222 368 55473 0.056 0.068 2222 368 55563 5.0 x 14.0 x 17.5 0.6 2222 368 55683 0.1 5.5 x 14.5 x 17.5 0.7 2222 368 55104 0.12 6.0 x 15.0 x 17.5 0.9 2222 368 55124 0.15 6.5 x 15.5 x 17.5 1.0 2222 368 55154 0.082 1999 Apr 29 2222 368 55823 15 BC Components Maintenance type Metallized polyester film capacitors MKT 368 MKT 368 GENERAL DATA PITCH 22.5/27.5 mm b l handbook, full pagewidth seating plane(1) h (2) lt P (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. dt A CBA071 Fig.9 Outline. Specific reference data for the 400 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: 0.15 F < C 0.47 F 0.47 F < C 1.0 F Rated voltage pulse slope (dU/dt)R at 400 V (DC): P = 22.5 mm P = 27.5 mm R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (AC) voltage between leads and case at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 75 x 10-4 130 x 10-4 130 x 10-4 300 x 10-4 - 20 V/s 16 V/s >30000 M >10000 s >30000 M 640 V; 1 minute 800 V; 1 minute Available 400 V DC versions PACKAGING(1) C-tol DIMENSIONS 10% 5% 10% 5% 10% 5% 10% 5% lt = 4.0 +1.0/-0.5 mm Loose in box lt = 3.5 0.5 mm long leads; note 2 Taped on reel H = 16 mm; note 3 FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 368 55... 2222 368 56... 2222 368 53... 2222 368 57... 2222 368 51... 2222 368 52... 2222 368 58... 2222 368 59... ORDERING on request on request on request on request on request on request on request on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2. Length of long leads: a) lt = 25.0 4.0 mm for lead pitch 22.5 mm. b) lt = 24.0 4.0 mm for lead pitch 27.5 mm. 3. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 16 BC Components Maintenance type Metallized polyester film capacitors MKT 368 URdc = 400 V; URac = 220 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.18 5.5 x 17.5 x 26.0 2.2 2222 368 55184 0.22 6.5 x 18.5 x 26.0 2.8 2222 368 55224 0.27 6.0 x 18.0 x 26.0 2.5 2222 368 55274 0.33 6.5 x 18.5 x 26.0 2.8 8.0 x 20.0 x 26.0 3.8 0.39 0.47 2222 368 55334 2222 368 55394 2222 368 55474 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.56 7.5 x 20.5 x 30.0 3.8 2222 368 55564 0.68 8.5 x 21.5 x 30.0 4.5 2222 368 55684 0.82 9.5 x 22.5 x 30.0 5.2 2222 368 55824 10.5 x 23.5 x 30.0 5.8 2222 368 55105 1 1999 Apr 29 17 BC Components Maintenance type Metallized polyester film capacitors MKT 368 MKT 368 GENERAL DATA PITCH 10/15 mm b l handbook, full pagewidth seating plane(1) h (2) lt (1) Hole 1.0 for dt = 0.6 mm. Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. P dt A CBA071 Fig.10 Outline. Specific reference data for the 630 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: C 0.068 F Rated voltage pulse slope (dU/dt)R at 630 V (DC): P = 10 mm P = 15 mm R between leads, for C 0.33 F at 500 V; 1 minute RC between leads, for C > 0.33 F at 500 V; 1 minute R between interconnecting leads and casing; 500 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (AC) voltage between leads and case at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 130 x 10-4 225 x 10-4 70 V/s 70 V/s >30000 M >10000 s >30000 M 1008 V; 1 minute 1260 V; 1 minute Available 630 V DC versions PACKAGING(1) C-tol DIMENSIONS 10% 5% 10% 5% 10% 5% 10% 5% lt = 4.0 +1.0/-0.5 mm Loose in box lt = 3.5 0.5 mm lt = 19.0 4.0 mm Taped on reel H = 16 mm; note 2 FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 368 65... 2222 368 66... 2222 368 63... 2222 368 67... 2222 368 61... 2222 368 62... 2222 368 68... 2222 368 69... ORDERING on request on request on request on request on request on request on request on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 18 BC Components Maintenance type Metallized polyester film capacitors MKT 368 URdc = 630 V; URac = 250 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm; A = 2.0 +1.0/-0.5 mm 0.01 4.5 x 13.5 x 12.5 0.5 2222 368 65103 0.012 5.0 x 14.0 x 12.5 0.5 2222 368 65123 0.015 5.5 x 14.5 x 12.5 0.6 2222 368 65153 0.018 6.0 x 15.0 x 12.5 0.6 2222 368 65183 0.022 6.5 x 15.5 x 12.5 0.8 2222 368 65223 Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.027 5.5 x 14.5 x 17.5 0.7 2222 368 65273 0.033 6.0 x 15.0 x 17.5 0.9 2222 368 65333 0.039 6.5 x 15.5 x 17.5 1.0 2222 368 65393 0.047 7.0 x 16.0 x 17.5 1.2 2222 368 65473 0.056 7.5 x 16.5 x 17.5 1.3 2222 368 65563 0.068 8.0 x 17.0 x 17.5 1.4 2222 368 65683 1999 Apr 29 19 BC Components Maintenance type Metallized polyester film capacitors MKT 368 MKT 368 GENERAL DATA PITCH 22.5/27.5 mm b l handbook, full pagewidth seating plane(1) h (2) lt P (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. dt A CBA071 Fig.11 Outline. Specific reference data for the 630 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: 0.068 F < C 0.1 F 0.1 F < C 0.47 F Rated voltage pulse slope (dU/dt)R at 630 V (DC): P = 22.5 mm P = 27.5 mm R between leads, for C 0.33 F at 500 V; 1 minute RC between leads, for C > 0.33 F at 500 V; 1 minute R between interconnecting leads and casing; 500 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (AC) voltage between leads and case at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 75 x 10-4 130 x 10-4 130 x 10-4 225 x 10-4 300 x 10-4 28 V/s 24 V/s >30000 M >10000 s >30000 M 1008 V; 1 minute 1260 V; 1 minute Available 630 V DC versions PACKAGING(1) C-tol DIMENSIONS 10% 5% 10% 5% 10% 5% 10% 5% lt = 4.0 +1.0/-0.5 mm Loose in box lt = 3.5 0.5 mm long leads; note 2 Taped on reel H = 16 mm; note 3 FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 368 65... 2222 368 66... 2222 368 63... 2222 368 67... 2222 368 61... 2222 368 62... 2222 368 68... 2222 368 69... ORDERING on request on request on request on request on request on request on request on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information"; taped on reel pitch = 27.5 mm is not available. 2. Length of long leads: a) lt = 25.0 4.0 mm for lead pitch 22.5 mm. b) lt = 24.0 4.0 mm for lead pitch 27.5 mm. 3. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 20 BC Components Maintenance type Metallized polyester film capacitors MKT 368 URdc = 630 V; URac = 250 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 0.082 6.0 x 18.0 x 26.0 2.5 2222 368 65823 0.1 7.0 x 19.0 x 26.0 3.2 2222 368 65104 0.12 7.5 x 19.5 x 26.0 3.5 2222 368 65124 0.15 8.0 x 21.0 x 26.0 3.8 2222 368 65154 0.18 9.0 x 22.0 x 26.0 4.5 2222 368 65184 0.22 10.0 x 23.0 x 26.0 5.2 2222 368 65 224 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm; A = 2.5 +1.4/-0.5 mm 10.0 x 23.0 x 30.0 5.5 2222 368 65274 0.33 11.5 x 24.5 x 30.0 6.5 2222 368 65334 0.39 12.5 x 25.5 x 30.0 7.1 2222 368 65394 0.47 14.0 x 27.0 x 30.0 8.2 2222 368 65474 0.27 1999 Apr 29 21 BC Components Maintenance type Metallized polyester film capacitors MKT 369 MKT 369 GENERAL DATA PITCH 10 mm b l handbook, full pagewidth seating plane(1) h 1.5 lt 1.3 dt P CBA072 (1) Hole 1.0 for dt = 0.6 mm. Fig.12 Outline. Specific reference data for the 63 V DC capacitors VALUE DESCRIPTION at 1 kHz at 10 kHz at 100 kHz 0.1 F < C 0.47 F 75 x 10-4 130 x 10-4 300 x 10-4 0.47 F < C 1.0 F 75 x 10-4 130 x 10-4 - Tangent of loss angle: Rated voltage pulse slope (dU/dt)R at 63 V (DC) 30 V/s R between leads, for C 0.33 F at 10 V; 1 minute >15000 M RC between leads, for C > 0.33 F at 10 V; 1 minute >5000 s >30000 M R between interconnecting leads and casing; 10 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 100 V; 1 minute Withstanding (AC) voltage between leads and case 200 V; 1 minute Available 63 V DC versions PACKAGING(1) DIMENSIONS lt = 4.0 +1.0/-0.5 mm Loose in box lt = 22.0 4.0 mm Taped on reel H = 18.5 mm; note 2 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 2222 369 15... on request 5% 2222 369 16... on request 10% 2222 369 11... on request 5% 2222 369 12... on request 10% 2222 369 18... on request 5% 2222 369 19... on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 22 BC Components Maintenance type Metallized polyester film capacitors MKT 369 URdc = 63 V; URac = 40 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.22 0.27 0.33 2222 369 15224 4.5 x 10.0 x 12.5 2222 369 15274 0.4 2222 369 15334 0.39 0.47 2222 369 15394 2222 369 15474 5.0 x 10.5 x 12.5 0.5 5.5 x 11.0 x 12.5 0.5 2222 369 15684 0.82 6.0 x 11.5 x 12.5 0.6 2222 369 15824 1 6.5 x 12.0 x 12.5 0.7 2222 369 15105 0.56 0.68 1999 Apr 29 2222 369 15564 23 BC Components Maintenance type Metallized polyester film capacitors MKT 369 MKT 369 GENERAL DATA PITCH 10 mm b l handbook, full pagewidth seating plane(1) h 1.5 lt 1.3 dt P CBA072 (1) Hole 1.0 for dt = 0.6 mm. Fig.13 Outline. Specific reference data for the 100 V DC capacitors VALUE DESCRIPTION at 1 kHz at 10 kHz at 100 kHz C 0.1 F 75 x 10-4 130 x 10-4 225 x 10-4 C 0.1 F 75 x 10-4 130 x 10-4 300 x 10-4 Tangent of loss angle: Rated voltage pulse slope (dU/dt)R at 100 V (DC) 28 V/s R between leads, for C 0.33 F at 100 V; 1 minute >15000 M R between interconnecting leads and casing; 100 V; 1 minute >30000 M Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 160 V; 1 minute Withstanding (AC) voltage between leads and case 200 V; 1 minute Available 100 V DC versions PACKAGING(1) DIMENSIONS lt = 4.0 +1.0/-0.5 mm Loose in box lt = 22.0 4.0 mm Taped on reel H = 18.5 mm; note 2 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 2222 369 25... on request 5% 2222 369 26... on request 10% 2222 369 21... on request 5% 2222 369 22... on request 10% 2222 369 28... on request 5% 2222 369 29... on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 24 BC Components Maintenance type Metallized polyester film capacitors MKT 369 URdc = 100 V; URac = 63 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.056 2222 369 25563 0.068 2222 369 25683 0.082 0.1 4.0 x 9.5 x 12.5 2222 369 25823 0.4 2222 369 25104 0.12 2222 369 25124 0.15 2222 369 25154 0.18 4.5 x 10.0 x 12.5 0.5 2222 369 25184 0.22 5.0 x 10.5 x 12.5 0.5 2222 369 25224 1999 Apr 29 25 BC Components Maintenance type Metallized polyester film capacitors MKT 369 MKT 369 GENERAL DATA PITCH 10 mm b l handbook, full pagewidth seating plane(1) h 1.5 lt 1.3 dt P CBA072 (1) Hole 1.0 for dt = 0.6 mm. Fig.14 Outline. Specific reference data for the 250 V DC capacitors VALUE DESCRIPTION at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 130 x 10-4 225 x 10-4 Tangent of loss angle: C 0.1 F Rated voltage pulse slope (dU/dt)R at 250 V (DC) 70 V/s R between leads, for C 0.33 F at 10 V; 1 minute >30000 M R between interconnecting leads and casing; 100 V; 1 minute >30000 M Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 400 V; 1 minute Withstanding (AC) voltage between leads and case 500 V; 1 minute Available 250 V DC versions PACKAGING(1) C-tol DIMENSIONS lt = 4.0 +1.0/-0.5 mm Loose in box lt = 22.0 4.0 mm Taped on reel H = 18.5 mm; note 2 FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 2222 369 45... on request 5% 2222 369 46... on request 10% 2222 369 41... on request 5% 2222 369 42... on request 10% 2222 369 48... on request 5% 2222 369 49... on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 26 BC Components Maintenance type Metallized polyester film capacitors MKT 369 URdc = 250 V; URac = 160 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.027 0.033 2222 369 45273 4.0 x 9.5 x 12.5 0.4 2222 369 45333 0.039 2222 369 45393 0.047 2222 369 45473 0.056 4.5 x 10.0 x 12.5 2222 369 45563 0.5 0.068 0.082 0.1 1999 Apr 29 2222 369 45683 5.0 x 10.5 x 12.5 2222 369 45823 0.5 2222 369 45104 27 BC Components Maintenance type Metallized polyester film capacitors MKT 369 MKT 369 GENERAL DATA PITCH 10 mm b l handbook, full pagewidth seating plane(1) h 1.5 lt 1.3 dt P CBA072 (1) Hole 1.0 for dt = 0.6 mm. Fig.15 Outline. Specific reference data for the 400 V DC capacitors VALUE DESCRIPTION at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 130 x 10-4 225 x 10-4 Tangent of loss angle: C 0.1 F Rated voltage pulse slope (dU/dt)R at 400 V (DC) 110 V/s R between leads, for C 0.33 F at 100 V; 1 minute >30000 M R between interconnecting leads and casing; 100 V; 1 minute >30000 M Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 640 V; 1 minute Withstanding (AC) voltage between leads and case 800 V; 1 minute Available 400 V DC versions PACKAGING(1) C-tol DIMENSIONS lt = 4.0 +1.0/-0.5 mm Loose in box lt = 22.0 4.0 mm Taped on reel H = 18.5 mm; note 2 FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 2222 369 55... on request 5% 2222 369 56... on request 10% 2222 369 51... on request 5% 2222 369 52... on request 10% 2222 369 58... on request 5% 2222 369 59... on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 28 BC Components Maintenance type Metallized polyester film capacitors MKT 369 URdc = 400 V; URac = 220 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.001 2222 369 55102 0.0012 2222 369 55122 0.0015 2222 369 55152 0.0018 2222 369 55182 0.0022 2222 369 55222 0.0027 2222 369 55272 0.0033 2222 369 55332 0.0039 2222 369 55392 0.0047 2222 369 55472 0.0056 4.5 x 10.0 x 12.5 2222 369 55562 0.5 0.0068 2222 369 55682 0.0082 2222 369 55822 0.01 2222 369 55103 0.012 2222 369 55123 0.015 2222 369 55153 0.018 2222 369 55183 0.022 2222 369 55223 0.027 2222 369 55273 0.033 2222 369 55333 1999 Apr 29 29 BC Components Maintenance type Metallized polyester film capacitors MKT 369 MKT 369 GENERAL DATA PITCH 10 mm b l handbook, full pagewidth seating plane(1) h 1.5 lt 1.3 dt P CBA072 (1) Hole 1.0 for dt = 0.6 mm. Fig.16 Outline. Specific reference data for the 630 V DC capacitors VALUE DESCRIPTION at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 130 x 10-4 225 x 10-4 Tangent of loss angle: C 0.1 F Rated voltage pulse slope (dU/dt)R at 630 V (DC) 70 V/s R between leads, for C 0.33 F at 500 V; 1 minute >30000 M RC between leads, for C > 0.33 F at 500 V; 1 minute >10000 s R between interconnecting leads and casing; 500 V; 1 minute >30000 M Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1008 V; 1 minute Withstanding (AC) voltage between leads and case 1260 V; 1 minute Available 630 V DC versions PACKAGING(1) DIMENSIONS lt = 4.0 +1.0/-0.5 mm Loose in box lt = 22.0 4.0 mm Taped on reel H = 18.5 mm; note 2 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 2222 369 65... on request 5% 2222 369 66... on request 10% 2222 369 61... on request 5% 2222 369 62... on request 10% 2222 369 68... on request 5% 2222 369 69... on request Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 30 BC Components Maintenance type Metallized polyester film capacitors MKT 369 URdc = 630 V; URac = 250 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.01 4.5 x 10.0 x 12.5 0.4 2222 369 65103 0.012 5.0 x 10.5 x 12.5 0.5 2222 369 65123 0.015 5.5 x 11.0 x 12.5 0.5 2222 369 65153 0.018 6.0 x 11.5 x 12.5 0.6 2222 369 65183 0.022 6.5 x 12.0 x 12.5 0.7 2222 369 65223 1999 Apr 29 31