Installation Instructions for the
392 Series, RV6 Series
0.5 W Conductive Plastic Potentiometers
Sensing and Control
Issue A
50099566
GENERAL INFORMATION
Potentiometers convert rotary motion into a change of resistance,
supplying a smooth transition of voltage or current levels. The result-
ing voltage output may be used to control position transducers in a
wide variety of potential applications.
The 392 Series and RV6 Series 0.5 W Plastic Potentiometers are
economical devices designed to meet wave soldering process
requirements for mounting to printed circuit boards (PCBs). All ver-
sions contain an internal shaft seal for moisture protection and com-
ply with PCB washability test requirements and MIL-R-94 standards
where appropriate. Termination types are PC pin or solder hook,
both are solder-dipped.
These small, single turn devices have a 3,18 mm [0.125 in] diameter
shaft that is available in a range of lengths. Most configurations have
either a standard or split locking 1/4-32 NEF-2A bushing in panel seal
or no panel seal versions. The shaft/bushing materials are nickel-
plated brass or thermoplastic. They are available in metal/metal,
plastic/plastic or a combination of the two. Custom designs are
available upon request.
The 392 Series and RV6 Series are available in resistances from 100
Ohm to 5 MOhm, inclusive. Tapers include linear, log, and antilog to
meet a wide range of application requirements.
RV6 Series devices meet requirements of MIL-R-94.
Table 1. Electrical Specications
Characteristic
Parameter
392 Series RV6 Series
Maximum working voltage 350 Vdc max.
Dielectric strength 750 Vac for 60 s at 1 mPa [atm], 350 Vac for 60 s at 11,5 kPa [3.4 inHg]
Power rating 0.5 W at 70 °C [158 °F], derated to 120 °C [248 °F] 0.25 W
Taper linear (S), linear (special),
log (Z), reverse log (RZ) linear (S), log (Z)
CRV1:
linear tapers
log, reverse log tapers
1.5% max. of total resistance
Resistance:
linear tapers
log, reverse log tapers
100 Ohm to 5 MOhm
500 Ohm to 2 MOhm
100 Ohm to 1 MOhm
500 Ohm to 1 MOhm
Resistance tolerance:
linear tapers:
100 Ohm to 1 MOhm
>1 MOhm
log, reverse log tapers:
500 Ohm to 250 kOhm
>250 kOhm
±10%
±20%
±10%
±20%
End resistance 4 Ohm max. at each end of rotation
Linearity ±5% independent
Electrical rotation:
nominal
effective
265° (+0°/-10°)
295° (±5°)
1Contact resistance variation is the maximum momentary change in contact resistance that occurs when the wiper is moved from one location to
another location. The larger this change, the more difficult it is to set the trimmer potentiometer and the more unstable the long term setting will be.
General Specifications ........front cover-5
392 Series:
Specific Configurations .............6-8
Order Guides ....................9-19
RV6 Series:
Specific Configurations ..............20
Order Guides ...................21-25
Mounting Hardware ............back page
TABLE OF CONTENTS
2 Honeywell Sensing and Control
392 Series, RV6 Series
0.5 W Conductive Plastic Potentiometers
ISSUE A 50099566
Table 2. Mechanical Specications
Characteristic
Parameter
392 Series RV6 Series
Shaft:
diameter
material:
metal
plastic
3,18 mm [0.125 in]
nickel-plated brass
thermoplastic
Bushing:
diameter/thread size
material:
metal
plastic
1/4-32 NEF-2A
nickel-plated brass
thermoplastic
Termination base material thermoset plastic
Termination types:
solder hook material
PC pin:
PCB fit
material
brass, solder (tin-lead) dip finish
(FFITS2,54 mm [0.100 in] grid spacing, 0,86 mm [0.034 in] holes
brass, solder (SAC305) dip finish
Cover material stainless steel
Housing material thermoplastic
Base material thermoset
Mounting hardware material:
jam nut
mounting nut
lock washer
panel O-ring
nickel-plated brass
nickel-plated brass
nickel-plated phospher bronze
Buna-N
Sealant epoxy
Rotational torque 3.5 mN m to 14 mN m [0.5 in-oz to 2.0 in-oz]
Stop torque 34 N m [3 in-lb]
Weight (approx.):
metal shaft and metal bushing
plastic shaft and plastic bushing
7,09 g [0.25 oz]
2,84 g [0.1 oz]
Table 3. Environmental Specications
Characteristic
Parameter
392 Series RV6 Series
Operating temperature -55 °C to 120 °C [-67 °F to 248 °F]
Base material -40 °C to 120 °C [-40 °F to 248 °F]
Rotational life tested to 50,000 cycles
Soldering — MIL-R-94
Honeywell Sensing and Control 3
392 Series, RV6 Series
0.5 W Conductive Plastic Potentiometers
ISSUE A 50099566
Table 4. Maximum Percent Temporary Resistance from 25 °C [77 °F]
Nominal
Resistance
Temperature
-55 °C
[-67 °F]
-40 °C
[-40 °F]
0 °C
[32 °F]
25 °C
[77 °F]
55 °C
[131 °F]
85 °C
[185 °F]
120 °C
[248 °F]
100 Ohm ±5.0 ±4.0 ±1.5 0 ±1.5 ±2.0 ±3.5
10 kOhm +7.0 +5.5 +2.0 0 ±1.5 ±2.5 ±5.5
100 kOhm +8.0 +6.0 +2.5 0 ±2.0 ±3.5 ±6.0
1 MOhm +10.0 +8.0 +3.0 0 ±2.5 ±4.0 ±7.5
Figure 1. Power Derating Curve
0102030405060708090100
0
10
20
30
40
50
60
70
80
90
100
Temperature (°C)
Rated Power (%)
1101
20
4 Honeywell Sensing and Control
392 Series, RV6 Series
0.5 W Conductive Plastic Potentiometers
ISSUE A 50099566
Figure 2. Recommended Wave Solder and Board Wash Parameters
01 2345
65
105
145
185
225
265
305
345
Time (Minutes)
6
Temperature (°F)
78
Wave solder
Fluxing Wash
and
rinse
Blow dry
Bake dry
Preheat
Process Limits Temperature Time
Preheat, max. 91 °C [195 °F] 1 min.
Solder, max. 288 °C [550 °F] —
Differential after solder in wash (3/4T), max. 22 °F [72 °F] —
Wash 66 °C to 71 °C [150 °F to 160 °F] 1.5 min.
Dry 47 °C to 104 °C [116 °F to 220 °F] 2 min.
Honeywell Sensing and Control 5
392 Series, RV6 Series
0.5 W Conductive Plastic Potentiometers
ISSUE A 50099566
Figure 3. Electrical Taper Diagrams (For reference only.)
Linear (S) The change in resistance is directly proportional to
the degree of rotation (right-hand or left-hand).
Linear (Special) Attains 50% resistance value at 50% of
clockwise rotation (left-hand).
Log (Z) Attains 10% resistance value at 50% of clockwise
rotation (left-hand).
Reverse Log (RZ) Attains 10% resistance value at 50% of
clockwise rotation (right-hand).
01020304050607080901
00
0
10
20
30
40
50
60
70
80
90
100
Angular Rotation, Clockwise Left to Right (%)
Total Resistance (%)
01020304050607080901
00
0
10
20
30
40
50
60
70
80
90
100
Angular Rotation, Clockwise Left to Right (%)
Total Resistance (%)
01020304050607080901
00
0
10
20
30
40
50
60
70
80
90
100
Angular Rotation, Clockwise Left to Right (%)
Total Resistance (%)
0102030405060708090100
0
10
20
30
40
50
60
70
80
90
10
0
Angular Rotation, Clockwise Left to Right (%)
Total Resistance (%)
Figure 4. Functional Schematic
L (L
eft) R (Right)
C (Center)
CW (Clock-W
ise)
6 Honeywell Sensing and Control
392 Series, RV6 Series
0.5 W Conductive Plastic Potentiometers
ISSUE A 50099566
Table 5. 392 Series Metal Shaft and Metal Bushing Specic Congurations
Shaft
Type
Bushing
Type
AR
Pin
Termin-
ation
Conguration with
Associated Hardware
Shaft
Type
Bushing
Type
AR
Pin
Termin-
ation
Conguration with
Associated Hardware
392-A (See Table 392-A on p. 9.) 392-B (See Table 392-B on p. 9.)
flatted
panel
seal,
standard,
6,35 mm
[0.25 in]
1
and
2
solder
hook round
no panel
seal,
standard,
6,35 mm
[0.25 in]
1
and
2
solder
hook
392-C (See Table 392-C on p. 10.) 392-D (See Table 392-D on p. 10.)
flatted
no panel
seal,
split,
locking,
12,7 mm
[0.50 in]
1
and
2
PC pin slotted
no panel
seal,
standard,
6,35 mm
[0.25 in]
1PC pin
392-E (See Table 392-E on p. 11.) 392-F (See Table 392-F on p 11.)
flatted
no panel
seal,
standard,
6,35 mm
[0.25 in]
0PC pin slotted
no panel
seal,
standard,
6,35 mm
[0.25 in]
1PC pin
392-G (See Table 392-G on p. 12.) 392-H (See Table 392-H on p.12.)
flatted
no panel
seal,
standard,
6,35 mm
[0.25 in]
1solder
hook slotted
no panel
seal,
standard,
6,35 mm
[0.25 in]
1solder
hook
392-I (See Table 392-I on p. 13.) 392-J (See Table 392-J on p. 13.)
flatted,
no panel
seal,
standard,
6,35 mm
[0.25 in]
1
and
2
PC pin slotted
no panel
seal,
standard,
6,35 mm
[0.25 in]
0solder
hook
Honeywell Sensing and Control 7
392 Series, RV6 Series
0.5 W Conductive Plastic Potentiometers
ISSUE A 50099566
Table 5. 392 Series Metal Shaft and Metal Bushing Specic Congurations (continued)
Shaft
Type
Bushing
Type
AR
Pin
Termin-
ation
Conguration with
Associated Hardware
Shaft
Type
Bushing
Type
AR
Pin
Termin-
ation
Conguration with
Associated Hardware
392-K (See Table 392-K on p. 14.) 392-L (See Table 392-L on p. 15.)
slotted
no panel
seal,
standard,
6,35 mm
[0.25 in]
1
and
2
PC pin slotted
no panel
seal,
standard,
6,35 mm
[0.25 in]
0solder
hook
392-M (See Table 392-M on p. 15.) 392-N (See Table 392-N on p. 16.)
slotted
no panel
seal,
un-
threaded
1
and
2
PC pin slotted
no panel
seal,
standard,
6,35 mm
[0.25 in]
1
and
2
PC pin
392-O (See Table 392-O on p. 16.) 392-P (See Table 392-P on p. 17.)
slotted
no panel
seal,
standard,
6,35 mm
[0.25 in]
1
and
2
solder
hook slotted
no panel
seal,
standard,
6,35 mm
[0.25 in]
1
and
2
PC pin
8 Honeywell Sensing and Control
392 Series, RV6 Series
0.5 W Conductive Plastic Potentiometers
ISSUE A 50099566
Table 5. 392 Series Plastic Shaft and Plastic Bushing Specic Congurations
Shaft
Type
Bushing
Type
AR
Pin
Termin-
ation
Conguration with
Associated Hardware
Shaft
Type
Bushing
Type
AR
Pin
Termin-
ation
Conguration with
Associated Hardware
392-Q (See Table 392-Q on p. 17.) 392-R (See Table 392-R on p 18.)
slotted
no panel
seal,
standard,
6,35 mm
[0.25 in]
2solder
hook
slotted
no panel
seal,
standard,
6,35 mm
[0.25 in]
0PC pin
392-S (See Table 392-S on p. 19.)
slotted trimmer,
standard 0PC pin
Honeywell Sensing and Control 9
392 Series, RV6 Series
0.5 W Conductive Plastic Potentiometers
ISSUE A 50099566
Table 392-A Order Guide
Catalog
Listing
Electrical Dimensions
RoHS
Compliant
Mounting
Hardware
Resistance
(Ohm)
Resistance
Tolerance
(±%)
Taper
A
Flat
Length
(mm [in])
B
Flat
Width
(mm [in])
C
Shaft
Length
(mm [in])
D
Bushing
Length
(mm [in])
392074M8792 10 k 10 S 4,78
[0.188]
2,39
[0.094]
12,70
[0.500]
6,35
[0.250] yes unassembled
Dimensional Drawing (For reference only: mm [in].)
45°
90°
A
1,57
[0.062]
5,08
[0.200]
5,08
[0.200]
1
Left
2
Center
3
Right
2X 0,64
[0.025]
3X 2,24 Ty p.
[0.088]
B
6,46
[0.254]
11,51
[0.453]
Locating
pin 1
Shown with 50% shaft rotation
Mounting surface
1/4-32 NEF-2A
2,03 Ty p.
[0.080]
0,91 Max.
[0.036]
3,97 Ty p.
[0.156]
16,66 Max.
[0.656]
Locating
pin 2
D
ø13,08
[0.515]
ø3,18
[0.125]
C
Table 392-B Order Guide
Catalog
Listing
Electrical Dimensions
RoHS
Compliant
Mounting
Hardware
Resistance
(Ohm)
Resistance
Tolerance
(±%)
Taper
A
Shaft Length
(mm [in])
B
Bushing Length
(mm [in])
392063M9270 10 k 10 S 15,09
[0.594]
6,35
[0.250] yes unassembled
Dimensional Drawing (For reference only: mm [in].)
6,46
[0.254]
45°
3X 2,24 Ty p.
[0.088]
2X 0,89
[0.035]
0,89 Max.
[0.035]
16,66 Max.
[0.656]
3,97 Ty p.
[0.156]
2,03 Ty p.
[0.080]
1,57
[0.062]
5,08
[0.200]
5,08
[0.200]
1
Left
2
Center
3
Right
11,51
[0.453]
Mounting surface
1/4-32 NEF-2A
Locating
pin 1
Locating
pin 2
ø13,08
[0.515]
A
B
ø3,17
[0.125]
Shown with 50% shaft rotation
10 Honeywell Sensing and Control
392 Series, RV6 Series
0.5 W Conductive Plastic Potentiometers
ISSUE A 50099566
Table 392-D Order Guide
Catalog
Listing
Electrical Dimensions
RoHS
Compliant
Mounting
Hardware
Resistance
(Ohm)
Resistance
Tolerance
(±%)
Taper
A
Slot
Depth
(mm [in])
B
Slot
Width
(mm [in])
C
Shaft
Length
(mm [in])
D
Bushing
Length
(mm [in])
E
Termination
Length
(mm [in])
392050M8789 10 k 10 RZ 0,79
[0.031]
0,79
[0.031]
12,70
[0.500]
6,35
[0.250]
14,30
[0.563] yes unassem-
bled
Dimensional Drawing (For reference only: mm [in].)
45°
90°
Locating
pin 1
6,46
[0.254]
0,89 Max.
[0.035]
2,03 Ty p.
[0.080]
1,57
[0.062]
5,08
[0.200]
5,08
[0.200]
1
Left
2
Center
3
Right
Shown with 50% shaft rotation
Mounting surface
1/4-32 NEF-2A
ø13,08
[0.515]
26,59
[1.047]
EA
D
C
ø3,18
[0.125]
3X ø0,71
[0.028]
0,89
[0.035]
11,91 Max.
[0.469] B
Table 392-C Order Guide
Catalog
Listing
Electrical Dimensions
RoHS
Compliant
Mounting
Hardware
Resistance
(Ohm)
Resistance
Tolerance
(±%)
Taper
A
Flat
Length
(mm [in])
B
Flat
Width
(mm [in])
C
Shaft
Length
(mm [in])
D
Bushing
Length
(mm [in])
E
Termination
Length
(mm [in])
392050M7461 2.5 M 10 S 5,16
[0.203]
2,39
[0.094]
18,26
[0.719]
12,70
[0.500]
14,30
[0.563] yes unassem-
bled
Dimensional Drawing (For reference only: mm [in].)
45°
90°
2X 0,89
[0.035]
1,02
[0.040]
1,57
[0.062]
5,08
[0.200]
5,08
[0.200]
1
Left
2
Center
3
Right
Shown with 50% shaft rotation
Mounting surface
1/4-32 NEF-2A
2,03 Ty p.
[0.080]
Locating
pin 1
Locating
pin 2
ø13,08
[0.515]
ø3,18
[0.125]
A
B
D
C
0,89 Max.
[0.035]
11,91 Max.
[0.469]
26,59
[1.047]
E
3X ø0,71
[0.028]
Honeywell Sensing and Control 11
392 Series, RV6 Series
0.5 W Conductive Plastic Potentiometers
ISSUE A 50099566
Table 392-F Order Guide
Catalog
Listing
Electrical Dimensions
RoHS
Compliant
Mounting
Hardware
Resistance
(Ohm)
Resistance
Tolerance
(±%)
Taper
A
Slot
Depth
(mm [in])
B
Slot
Width
(mm [in])
C
Shaft
Length
(mm [in])
D
Bushing
Length
(mm [in])
E
Termination
Length
(mm [in])
392050234617001 10 k 10 RZ 0,79
[0.031]
0,79
[0.031]
12,70
[0.500]
6,35
[0.250]
14,30
[0.563] no unassem-
bled
Dimensional Drawing (For reference only: mm [in].)
Table 392-E Order Guide
Catalog
Listing
Electrical Dimensions
RoHS
Compliant
Mounting
Hardware
Resistance
(Ohm)
Resistance
Tolerance
(±%)
Taper
A
Flat
Length
(mm [in])
B
Flat
Width
(mm [in])
C
Shaft
Length
(mm [in])
D
Bushing
Length
(mm [in])
E
Termination
Length
(mm [in])
392050M9605 2.5 k 10 S 7,14
[0.281]
2,36
[0.093]
14,27
[0.562]
4,75
[0.187]
14,30
[0.563] yes unassem-
bled
Dimensional Drawing (For reference only: mm [in].)
45°
90°
2,03 Ty p.
[0.080]
6,46
[0.254]
1,57
[0.062]
5,08
[0.200]
5,08
[0.200]
1
Left
2
Center
3
Right
Shown with 50% shaft rotation
Mounting surface
1/4-32 NEF-2A
ø13,08
[0.515]
ø3,18
[0.125]
3X ø0,71
[0.028]
A
B
D
C
0,89 Max.
[0.035]
11,91 Max.
[0.469]
E
26,59
[1.047]
6,46
[0.254]
45°
90°
0,89 Max.
[0.035]
1,57
[0.062]
5,08
[0.200]
5,08
[0.200]
1
Left
2
Center
3
Right
Shown with 50% shaft rotation
Mounting surface
1/4-32 NEF-2A Locating
pin 1
Locating
pin 2
ø13,08
[0.515]
ø3,18
[0.125]
E
26,59
[1.047]
3X ø0,71
[0.028]
2X 0,89
[0.035]
11,91 Max.
[0.469] 2,03 Ty p.
[0.080]
A
D
C
B
12 Honeywell Sensing and Control
392 Series, RV6 Series
0.5 W Conductive Plastic Potentiometers
ISSUE A 50099566
Table 392-G Order Guide
Catalog
Listing
Electrical Dimensions
RoHS
Compliant
Mounting
Hardware
Resistance
(Ohm)
Resistance
Tolerance
(±%)
Taper
A
Flat
Length
(mm [in])
B
Flat
Width
(mm [in])
C
Shaft
Length
(mm [in])
D
Bushing
Length
(mm [in])
392063M9549 15 k 10 special 6,35
[0.250]
2,39
[0.094]
41,28
[1.625]
6,35
[0.250] yes unassembled
Dimensional Drawings (For reference only: mm [in].)
Table 392-H Order Guide
Catalog
Listing
Electrical Dimensions
RoHS
Compliant
Mounting
Hardware
Resistance
(Ohm)
Resistance
Tolerance
(±%)
Taper
A
Slot
Depth
(mm [in])
B
Slot
Width
(mm [in])
C
Shaft
Length
(mm [in])
D
Bushing
Length
(mm [in])
392101M9437 2.5 k 10 S 0,79
[0.031]
0,79
[0.031]
12,70
[0.500]
6,35
[0.250] yes unassembled
Dimensional Drawing (For reference only: mm [in].)
45°
90°
0,89 Max.
[0.035]
16,66 Max.
[0.656]
2,03 Ty p.
[0.080]
0,89
[0.035]
6,46
[0.254]
1,57
[0.062]
5,08
[0.200]
5,08
[0.200]
1
Left
2
Center
3
Right
Shown with 50% shaft rotation
Mounting surface
1/4-32 NEF -2A
Locating
pin 1
ø13,08
[0.515]
3X 2,24 Ty p.
[0.088]
3,97 Ty p.
[0.156]
ø3,18
[0.125]
A
B
D
C
11,51 Max.
[0.453]
6,46
[0.254]
45°
90°
3X 2,24 Ty p.
[0.088]
3,97 Ty p.
[0.156]
16,66 Max.
[0.656]
0,89 Max.
[0.035]
2,03 Ty p.
[0.080]
1,57
[0.062]
5,08
[0.200]
5,08
[0.200]
1
Left
2
Center
3
Right
Shown with 50% shaft rotation
Mounting surface
1/4-32 NEF-2A
Locating
pin 1
Locating
pin 2
ø13,08
[0.515]
ø3,18
[0.125]
2X 0,99
[0.039]
11,51 Max.
[0.493] A
D
C
B
Honeywell Sensing and Control 13
392 Series, RV6 Series
0.5 W Conductive Plastic Potentiometers
ISSUE A 50099566
Table 392-J Order Guide
Catalog
Listing
Electrical Dimensions
RoHS
Compliant
Mounting
Hardware
Resistance
(Ohm)
Resistance
Tolerance
(±%)
Taper
A
Slot
Depth
(mm [in])
B
Slot
Width
(mm [in])
C
Shaft
Length
(mm [in])
D
Bushing
Length
(mm [in])
392063M9038 25 k 10 S 0,79
[0.031]
0,79
[0.031]
14,68
[0.578]
6,35
[0.250] yes unassem-
bled
Dimensional Drawing (For reference only: mm [in].)
Table 392-I Order Guide
Catalog
Listing
Electrical Dimensions
RoHS
Compliant
Mounting
Hardware
Resistance
(Ohm)
Resistance
Tolerance
(±%)
Taper
A
Flat
Length
(mm [in])
B
Flat
Width
(mm [in])
C
Shaft
Length
(mm [in])
D
Bushing
Length
(mm [in])
E
Termination
Length
(mm [in])
392050M9173 10 k 10 Z 11,91
[0.469]
2,39
[0.094]
19.05
[0.750]
6,35
[0.250]
14,30
[0.563] yes unassem-
bled
392050M9514 10 k 10 Z 15,47
[0.609]
2,39
[0.094]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] yes unassem-
bled
Dimensional Drawing (For reference only: mm [in].)
Locating
pin 1
Locating
pin 2
45°
90°
0,89 Max.
[0.035]
11,91 Max.
[0.469]
2X 0,89
[0.035]
26,59
[1.047]
1,57
[0.062]
5,08
[0.200]
5,08
[0.200]
1
Left
2
Center
3
Right
Shown with 50% shaft rotation
Mounting surface
1/4-32 NEF-2A
ø13,08
[0.515]
ø3,18
[0.125]
3X ø0,71
[0.028]
A
B
D
C
E
2,03 Ty p.
[0.080]
0,94
[0.037]
45°
90°
3X 2,24 Ty p.
[0.088]
3,97 Ty p.
[0.156]
16,66 Max.
[0.656]
0,89 Max.
[0.035]
2,03 Ty p.
[0.080]
1,57
[0.062]
5,08
[0.200]
5,08
[0.200]
1
Left
2
Center
3
Right
Shown with 50% shaft rotation
Mounting surface
1/4-32 NEF-2A
ø3,18
[0.125]
ø13,08
[0.515]
A
D
C
11,51
[ 0.453]
6,46
[0.254]
B
14 Honeywell Sensing and Control
392 Series, RV6 Series
0.5 W Conductive Plastic Potentiometers
ISSUE A 50099566
Table 392-K Order Guide
Catalog
Listing
Electrical Dimensions
RoHS
Compliant
Mounting
Hardware
Resistance
(Ohm)
Resistance
Tolerance
(±%)
Taper
A
Slot
Depth
(mm [in])
B
Slot
Width
(mm [in])
C
Shaft
Length
(mm [in])
D
Bushing
Length
(mm [in])
E
Termination
Length
(mm [in])
392JA2.5MEG 2.5 M 20 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] no unassembled
392JA250 250 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] yes unassembled
392JA2500 2.5 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] yes unassembled
392JA5MEG 5 M 20 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] yes unassembled
392JA1MEG 1 M 20 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] yes unassembled
392JA100 100 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] yes unassembled
392JA100K 100 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] yes unassembled
392JA10K 10 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] yes unassembled
392JA1K 1 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] yes unassembled
392JA250K 250 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] yes unassembled
392JA25K 25 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] yes unassembled
392JA500K 500 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] yes unassembled
392JA50K 50 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] yes unassembled
392JA5K 5 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] yes unassembled
392050M8964 50 k 20 S 0,79
[0.031]
0,79
[0.031]
15,88
[0.625]
6,35
[0.250]
14,30
[0.563] yes unassembled
392050M9492 5 k 10 S 0,79
[0.031]
0,79
[0.031]
15,09
[0.594]
6,35
[0.250]
14,30
[0.563] yes unassembled
392050M9519 50 k 20 S 0,79
[0.031]
0,79
[0.031]
25,40
[1.00]
6,35
[0.250]
14,30
[0.563] yes unassembled
392050M0016 10 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
9.53
[0.375] no unassembled
392050M8715 2 k 20 S 0,79
[0.031]
0,79
[0.031]
15,88
[0.625]
6,35
[0.250]
14,30
[0.563] yes unassembled
Dimensional Drawing (For reference only: mm [in].)
1,57
[0.062]
5,08
[0.200]
5,08
[0.200]
1
Left
2
Center
3
Right
Shown with 50% shaft rotation
Mounting surface
1/4-32 NEF-2A 45°
90°
Locating
pin 1
Locating
pin 2
6,46
[0.254]
ø13,08
[0.515]
2,03 Ty p.
[0.080]
ø3,18
[0.125]
2X 0,99
[0.039]
A
D
C
E
26,59
[1.047]
0.89 Max.
[0.035]
11,91 Max.
[0.469]
3X ø0,71
[0.028]
B
Honeywell Sensing and Control 15
392 Series, RV6 Series
0.5 W Conductive Plastic Potentiometers
ISSUE A 50099566
Table 392-M Order Guide
Catalog
Listing
Electrical Dimensions
RoHS
Compliant
Mounting
Hardware
Resistance
(Ohm)
Resistance
Tolerance
(±%)
Taper
A
Slot
Depth
(mm [in])
B
Slot
Width
(mm [in])
C
Shaft
Length
(mm [in])
D
Bushing
Length
(mm [in])
E
Termination
Length
(mm [in])
392050M9012 2 k 10 S 0,79
[0.031]
0,79
[0.031]
25,40
[1.000]
6,35
[0.250]
14,30
[0.563] yes unassembled
Dimensional Drawing (For reference only: mm [in].)
Table 392-L Order Guide
Catalog
Listing
Electrical Dimensions
RoHS
Compliant
Mounting
Hardware
Resistance
(Ohm)
Resistance
Tolerance
(±%)
Taper
A
Slot
Depth
(mm [in])
B
Slot
Width
(mm [in])
C
Shaft
Length
mm [in]
D
Bushing
Length
mm [in]
392101M9524 100 10 S 0,79
[0.031]
0,79
[0.031]
15,88
[0.625]
6,35
[0.250] yes unassembled
Dimensional Drawing (For reference only: mm [in].)
1,57
[0.062]
5,08
[0.200]
5,08
[0.200]
1
Left
2
Center
3
Right
Shown with 50% shaft rotation
Mounting surface
1/4-2 NEF-2A
2,03 Ty p.
[0.080]
ø13,08
[0.515]
45°
90°
6,46
[0.254]
ø3,17
[0.125]
0,89 Max.
[0.035]
16,66 Max.
[0.656]
11,51 Max.
[0.453]
3X 2,24 Ty p.
[0.088]
3,97 Ty p.
[0.156]
A
A
C
D
1,57
[0.062]
5,08
[0.200]
5,08
[0.200]
1
Left
2
Center
3
Right
Shown with 50% shaft rotation
Mounting surface
45°
90°
Locating
pin 1
Locating
pin 2
2,03 Ty p.
[0.080]
ø13,08
[0.515]
ø3,18
[0.125]
2X 0,89
[0.035]
26,59
[1.047]
A
D
C
E
0.89 Max.
[0.035]
11,91 Max.
[0.469]
3X ø0,71
[0.028]
6,46
[0.254]
B
16 Honeywell Sensing and Control
392 Series, RV6 Series
0.5 W Conductive Plastic Potentiometers
ISSUE A 50099566
Table 392-N Order Guide
Catalog
Listing
Electrical Dimensions
RoHS
Compliant
Mounting
Hardware
Resistance
(Ohm)
Resistance
Tolerance
(±%)
Taper
A
Slot
Depth
(mm [in])
B
Slot
Width
(mm [in])
C
Shaft
Length
(mm [in])
D
Bushing
Length
(mm [in])
E
Termination
Length
(mm [in])
392050M8756 10 k 10 Z 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] no unassembled
392050M9382 500 10 Z 0,79
[0.031]
0,79
[0.031]
17,45
[0.687]
7,92
[0.312
14,30
[0.563] yes unassembled
392050M9488 1 M 20 Z 0,79
[0.031]
0,79
[0.031]
15,09
[0.594]
6,35
[0.250]
14,30
[0.563] yes unassembled
Dimensional Drawing (For reference only: mm [in].)
Table 392-O Order Guide
Catalog
Listing
Electrical Dimensions
RoHS
Compliant
Mounting
Hardware
Resistance
(Ohm)
Resistance
Tolerance
(±%)
Taper
A
Slot
Depth
(mm [in])
B
Slot
Width
(mm [in])
C
Shaft
Length
(mm [in])
D
Bushing
Length
(mm [in])
392063M9308 10 k 10 S 0,79
[0.031]
0,79
[0.031]
15,88
[0.625]
6,35
[0.250] yes unassembled
Dimensional Drawing (For reference only: mm [in].)
1,57
[0.062]
5,08
[0.200]
5,08
[0.200]
1
Left
2
Center
3
Right
Shown with 50% shaft rotation
Mounting surface
1/4-32 NEF-2A
2,03 Ty p.
[0.080]
ø13,08
[0.515]
45°
90°
Locating
pin 1
Locating
pin 2
6,46
[0.254]
ø3,17
[0.125]
2X 0,99
[0.039]
0,89 Max.
[0.035]
16,66 Max.
[0.656]
11,51 Max.
[0.453]
3X 2,24 Ty p.
[0.088]
3,97 Max.
[0.156] 4,78
[0.188]
3,18
[0.125]
B
B
C
D
1,57
[0.062]
5,08
[0.200]
5,08
[0.200]
1
Left
2
Center
3
Right
Shown with 50% shaft rotation
Mounting surface
1/4-32 NEF-2A
2,03 Ty p.
[0.080]
ø13,08
[0.515]
45°
90°
Locating
pin 2
6,46
[0.254]
ø3,17
[0.125]
2X 0,89
[0.035]
0.89 Max.
[0.035]
26,59
[1.047]
A
D
C
E 11,91 Max.
[0.469]
3X ø0,71
[0.028]
B
Locating
pin 1
Honeywell Sensing and Control 17
392 Series, RV6 Series
0.5 W Conductive Plastic Potentiometers
ISSUE A 50099566
Table 392-Q Order Guide
Catalog
Listing
Electrical Dimensions
RoHS
Compliant
Mounting
Hardware
Resistance
(Ohm)
Resistance
Tolerance
(±%)
Taper
A
Slot
Depth
(mm [in])
B
Slot
Width
(mm [in])
C
Shaft
Length
(mm [in])
D
Bushing
Length
(mm [in])
392072M6256 5 k 10 S 0,79
[0.031]
0,79
[0.031]
9,53
[0.375]
6,35
[0.250] yes unassembled
Dimensional Drawing (For reference only: mm [in].)
1,57
[0.062]
5,08
[0.200]
5,08
[0.200]
1
Left
2
Center
3
Right
Shown with 50% shaft rotation
Mounting surface
1/4-32 NEF-2A
2,03 Ty p.
[0.080]
ø13,08
[0.515]
45°
90°
Locating
pin 1
Locating
pin 2
6,45
[0.254
]
ø3,16
[0.125]
2X 0,89
[0.035]
0,92 Max.
[0.036]
16,66 Max.
[0.656]
11,51 Max.
[0.453] A
D
C
3X 2,24 Ty p.
[0.088]
3,97 Max.
[0.156]
B
Table 392-P Order Guide
Catalog
Listing
Electrical Dimensions
RoHS
Compliant
Mounting
Hardware
Resistance
(Ohm)
Resistance
Tolerance
(±%)
Taper
A
Slot
Depth
(mm [in])
B
Slot
Width
(mm [in])
C
Shaft
Length
(mm [in])
D
Bushing
Length
(mm [in])
E
Termination
Length
(mm [in])
392NAYSB103A 10 k 10 S 0,79
[0.031]
0,79
[0.031]
12,70
[0.500]
6,35
[0.250]
14,30
[0.563] no unassembled
Dimensional Drawing (For reference only: mm [in].)
Shown with 50% shaft rotation
45°
Locating
pin 1
2,03 Ty p.
[0.080]
ø13,08
[0.515]
6,46
[0.254]
Mounting surface
1/4-32 NEF-2A
2X 0,89
[0.035]
D
C
A
ø3,18
[0.125]
E
0,89 Max.
[0.035]
11,91
[0.469]
26,59 Max.
[1.047]
3X ø0,71
[0.028]
1,57
[0.062]
1
Left
2
Center
3
Right
5,08
[0.200]
5,08
[0.200]
Locating
pin 2
90°
18 Honeywell Sensing and Control
392 Series, RV6 Series
0.5 W Conductive Plastic Potentiometers
ISSUE A 50099566
Table 392-R Order Guide
Catalog
Listing
Electrical Dimensions
RoHS
Compliant
Mounting
Hardware
Resistance
(Ohm)
Resistance
Tolerance
(±%)
Taper
A
Slot
Depth
(mm [in])
B
Slot
Width
(mm [in])
C
Shaft
Length
(mm [in])
D
Bushing
Length
(mm [in])
E
Termination
Length
(mm [in])
392JB1MEG 1 M 20 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] yes unassembled
392JB100 100 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] yes unassembled
392JB100/NEW 100 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] no unassembled
392JB100K 100 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] yes unassembled
392JB10K 10 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] yes unassembled
392JB1K 1 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] yes unassembled
392JB250 250 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] yes unassembled
392JB2500 2.5 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] yes unassembled
392JB250K 250 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] yes unassembled
392JB25K 25 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] yes unassembled
392JB500 500 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] yes unassembled
392JB500K 500 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] yes unassembled
392JB50K 50 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] yes unassembled
392JB5K 5 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] yes unassembled
392051M9692 10 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] yes none
392051M9693 1 M 20 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250]
14,30
[0.563] yes none
392051M5761 2.5 k 10 S 0,79
[0.031]
0,79
[0.031]
15,85
[0.624]
6,35
[0.250]
14,30
[0.563] yes none
392051M5803 1 M 10 S 0,79
[0.031]
0,79
[0.031]
15,85
[0.624]
6,35
[0.250]
14,30
[0.563] yes unassembled
Dimensional Drawing (For reference only: mm [in].)
1,57
[0.062]
5,08
[0.200]
5,08
[0.200]
1
Left
2
Center
3
Right
Shown with 50% shaft rotation
Mounting surface
1/4-32 NEF-2A
2,03 Ty p.
[0.080]
ø13,03
[0.513]
45°
90°
Locating
pin 1
Locating
pin 2
ø3,16
[0.125]
2X 0,89
[0.035]
0.92 Max.
[0.036]
26,59
[1.047]
A
D
C
E 11,91 Max.
[0.469]
3X ø0,71
[0.028]
B
6,44
[0.253]
Honeywell Sensing and Control 19
392 Series, RV6 Series
0.5 W Conductive Plastic Potentiometers
ISSUE A 50099566
Table 392-S Order Guide
Catalog
Listing
Electrical Dimensions
RoHS
Compliant
Mounting
Hardware
Resistance
(Ohm)
Resistance
Tolerance
(±%)
Taper
A
Slot
Depth
(mm [in])
B
Slot
Width
(mm [in])
C
Termination
Length
(mm [in])
3925100K 100 k 10 S 0,79
[0.031]
0,79
[0.031]
14,30
[0.563] yes none
392510K 10 k 10 S 0,79
[0.031]
0,79
[0.031]
14,30
[0.563] yes none
3925250 250 10 S 0,79
[0.031]
0,79
[0.031]
14,30
[0.563] yes none
3925500 500 10 S 0,79
[0.031]
0,79
[0.031]
14,30
[0.563] yes none
3925500K 500 k 10 S 0,79
[0.031]
0,79
[0.031]
14,30
[0.563] yes none
392550K 50 k 10 S 0,79
[0.031]
0,79
[0.031]
14,30
[0.563] yes none
39255K 5 k 10 S 0,79
[0.031]
0,79
[0.031]
14,30
[0.563] yes none
392055M8814 100 k 10 S 0,79
[0.031]
0,79
[0.031]
14,30
[0.563] yes none
Dimensional Drawing (For reference only: mm [in].)
1,57
[0.062]
5,08
[0.200]
5,08
[0.200]
1
Left
2
Center
3
Right
Shown with 50% shaft rotation
Mounting surface
0.92 Max.
[0.036]
26,59
[1.047]
C
3X ø0,71
[0.028]
6,52
[0.257]
90°
ø
13,03
[0.513]
A
See Detail A
Detail A
A
ø
3,16
[0.1
25]
11.91 Max.
[0.469]
20 Honeywell Sensing and Control
392 Series, RV6 Series
0.5 W Conductive Plastic Potentiometers
ISSUE A 50099566
Table 7. RV6 Series Metal Shaft and Metal Bushing Specic Congurations
Shaft
Type
Bushing
Type
AR
Pin
Termin-
ation
Conguration with
Associated Hardware
Shaft
Type
Bushing
Type
AR
Pin
Termin-
ation
Conguration with
Associated Hardware
RV6-A (See Table RV6-A on p. 21.) RV6-B (See Table RV6-B on p. 21.)
flatted
panel
seal,
standard,
6,35 mm
[0.25 in]
1
and
2
solder
hook flatted
no panel
seal,
standard,
6,35 mm
[0.25 in
1
and
2
solder hook
RV6-C (See Table RV6-C on p. 22.) RV6-D (See Table RV6-D on p. 22.)
slotted
panel
seal,
split
locking,
12,7 mm
[0.50 in]
1
and
2
solder
hook slotted
panel
seal,
standard,
6,35 mm
[0.25 in
1
and
2
solder hook
RV6-E (See Table RV6-E on p. 23.) RV6-F (See Table RV6-F on pp. 24-25.)
slotted
panel
seal,
split
locking,
12,7 mm
[0.50 in]
1
and
2
solder
hook slotted
no panel
seal,
standard,
6,35 mm
[0.25 in
1
and
2
solder hook
RV6-G (See Table RV6-G on p. 25.)
slotted
no panel
seal,
standard,
6,35 mm
[0.25 in]
1
and
2
solder
hook
Honeywell Sensing and Control 21
392 Series, RV6 Series
0.5 W Conductive Plastic Potentiometers
ISSUE A 50099566
Table RV6-A Order Guide
Catalog
Listing
Electrical Dimensions
RoHS
Compliant
Mounting
Hardware
Resistance
(Ohm)
Resistance
Tolerance
(±%)
Taper
A
Flat
Length
(mm [in])
B
Flat
Width
(mm [in])
C
Shaft
Length
(mm [in])
D
Bushing
Length
(mm [in])
RV6SAYFD502B 5 k 20 S 15,47
[0.609]
2,39
[0.094]
22,23
[0.875]
6,35
[0.250] no unassembled
Dimensional Drawing (For reference only: mm [in].)
Table RV6-B Order Guide
Catalog
Listing
Electrical Dimensions
RoHS
Compliant
Mounting
Hardware
Resistance
(Ohm)
Resistance
Tolerance
(±%)
Taper
A
Flat
Length
(mm [in])
B
Flat
Width
(mm [in])
C
Shaft
Length
(mm [in])
D
Bushing
Length
(mm [in])
RV6NAYFD103A 10 k 10 S 15,47
[0.609]
2,39
[0.094]
22,23
[0.875]
6,35
[0.250] no unassembled
Dimensional Drawing (For reference only: mm [in].)
A
D
3X 2,24 Ty p.
[0.088]
1,57
[0.062]
5,08
[0.200]
5,08
[0.200]
1
Left
2
Center
3
Right
3,97 Ty p.
[0.156]
C
16,66 Max.
[0.656]
0,91 Max.
[0.036]
11,51
[ 0.453]
Mounting surface
1/4-32 NEF-2A
Shown with 50% shaft rotation
ø3,18
[0.125]
2,03 Ty p.
[0.080]
ø13,08
[0.515]
6,46
[0.254]
45°
90°
Locating
pin 1
Locating
pin 2
2X 0,64
[0.025]
B
Shown with 50% shaft rotation
3X 2,24 Ty p.
[0.088]
1,57
[0.062]
5,08
[0.200]
5,08
[0.200]
1
Left
2
Center
3
Right
A
D
C
16,66 Max.
[0.656]
0,89 Max.
[0.035]
11,51
[ 0.453]
3,97 Ty p.
[0.156] ø13,08
[0.515]
6,46
[0.254]
45°
90°
Locating
pin 1
Locating
pin 2
2,03 Ty p.
[0.080]
Mounting surface
1/4-32 NEF-2A
2X 0,89
[0.035]
ø3,18
[0.125]
B
22 Honeywell Sensing and Control
392 Series, RV6 Series
0.5 W Conductive Plastic Potentiometers
ISSUE A 50099566
Table RV6-C Order Guide
Catalog
Listing
Electrical Dimensions
RoHS
Compliant
Mounting
Hardware
Resistance
(Ohm)
Resistance
Tolerance
(±%)
Taper
A
Slot
Depth
(mm [in])
B
Slot
Width
(mm [in])
C
Shaft
Length
(mm [in])
D
Bushing
Length
(mm [in])
RV6TAYSA103A 10 k 10 S 0,79
[0.031]
0,79
[0.031]
15,88
[0.625]
12,70
[0.500]no unassembled
RV6TAYSA503A 50 k 10 S 0,79
[0.031]
0,79
[0.031]
15,88
[0.625]
12,70
[0.500]no unassembled
RV6TAYSD103A 10 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
12,70
[0.500]no unassembled
RV6TAYSD502B 5 k 20 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
12,70
[0.500] no unassembled
Dimensional Drawing (For reference only: mm [in].)
Table RV6-D Order Guide
Catalog
Listing
Electrical Dimensions
RoHS
Compliant
Mounting
Hardware
Resistance
(Ohm)
Resistance
Tolerance
(±%)
Taper
A
Slot
Depth
(mm [in])
B
Slot
Width
(mm [in])
C
Shaft
Length
(mm [in])
D
Bushing
Length
(mm [in])
RV6SAYSA103A 10 k 10 S 0,79
[0.031]
0,79
[0.031]
15,88
[0.625]
12,70
[0.500] no unassembled
RV6SAYSA104A 100 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
12,70
[0.500] no unassembled
RV6SAYSD251A 250 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
12,70
[0.500] no unassembled
RV6SAYSD502A
N/P 392 5 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
12,70
[0.500] no unassembled
Dimensional Drawing (For reference only: mm [in].)
Shown with 50% shaft rotation
3X 2,24 Ty p.
[0.088]
1,57
[0.062]
5,08
[0.200]
5,08
[0.200]
1
Left
2
Center
3
Right
ø3,18
[0.125]
3,97 Ty p.
[0.156]
A
D
C
16,66 Max.
[0.656]
0,91 Max.
[0.036]
11,51
[ 0.453]
45°
90°
Locating
pin 1
2,03 Ty p.
[0.080]
ø
13,08
[0.515]
6,54
[0.258]
Mounting surface
1/4-32 NEF-2A
B
Locating
pin 2
2X 0,89 Ty p.
[0.035]
Shown with 50% shaft rotation
3X 2,24 Ty p.
[0.088]
1,57
[0.062]
5,08
[0.200]
5,08
[0.200]
1
Left
2
Center
3
Right
45°
90°
Locating
pin 1
2,03 Ty p.
[0.080]
ø13,08
[0.515]
6,46
[0.254]
3,97 Ty p.
[0.156]
16,66 Max.
[0.656]
0,91 Max.
[0.036]
11,51
[ 0.453]
Mounting surface
1/4-32 NEF-2A
2X 0,64
[0.025]
ø3,18
[0.125]
B
A
D
C
Honeywell Sensing and Control 23
392 Series, RV6 Series
0.5 W Conductive Plastic Potentiometers
ISSUE A 50099566
Table RV6-E Order Guide
Catalog
Listing
Electrical Dimensions
RoHS
Compliant
Mounting
Hardware
Resistance
(Ohm)
Resistance
Tolerance
(±%)
Taper
A
Flat
Length
(mm [in])
B
Flat
Width
(mm [in])
C
Shaft
Length
(mm [in])
D
Bushing
Length
(mm [in])
RV6LAYSA101A 100 10 S 0,79
[0.031]
0,79
[0.031]
15,88
[0.625]
12,70
[0.500] no assembled
RV6LAYSA102A 1 k 10 S 0,79
[0.031]
0,79
[0.031]
15,88
[0.625]
12,70
[0.500] no assembled
RV6LAYSA103A 10 k 10 S 0,79
[0.031]
0,79
[0.031]
15,88
[0.625]
12,70
[0.500] no assembled
RV6LAYSA104A 100 k 10 S 0,79
[0.031]
0,79
[0.031]
15,88
[0.625]
12,70
[0.500] no assembled
RV6LAYSA105A 1 M 10 S 0,79
[0.031]
0,79
[0.031]
15,88
[0.625]
12,70
[0.500] no assembled
RV6LAYSA251A 250 10 S 0,79
[0.031]
0,79
[0.031]
15,88
[0.625]
12,70
[0.500] no assembled
RV6LAYSA252A 2.5 k 10 S 0,79
[0.031]
0,79
[0.031]
15,88
[0.625]
12,70
[0.500] no assembled
RV6LAYSA253A 25k 10 S 0,79
[0.031]
0,79
[0.031]
15,88
[0.625]
12,70
[0.500] no assembled
RV6LAYSA501A 500 10 S 0,79
[0.031]
0,79
[0.031]
15,88
[0.625]
12,70
[0.500] no assembled
RV6LAYSA502A 5 k 10 S 0,79
[0.031]
0,79
[0.031]
15,88
[0.625]
12,70
[0.500] no assembled
RV6LAYSA503A 50 k 20 S 0,79
[0.031]
0,79
[0.031]
15,88
[0.625]
12,70
[0.500] no assembled
RV6LAYSA504A 500 k 10 S 0,79
[0.031]
0,79
[0.031]
15,88
[0.625]]
12,70
[0.500] no assembled
RV6LAYSA505B 5 M 10 S 0,79
[0.031]
0,79
[0.031]
15,88
[0.625]
12,70
[0.500] no unassembled
Dimensional Drawing (For reference only: mm [in].)
Shown with 50% shaft rotation
1,57
[0.062]
5,08
[0.200]
5,08
[0.200]
1
Left
2
Center
3
Right
3X 2,24 Ty p.
[0.088]
2X 0,89
[0.035]
ø3,18
[0.125]
16,66 Max.
[0.656]
0,89 Max.
[0.035]
11,51
[0.453]
3,97 Ty p.
[0.156]
Mounting surface
1/4-32 NEF-2A
ø13,08
[0.515]
45°
90°
Locating
pin 1
2,03 Ty p.
[0.080]
6,46
[0.254]
B
A
D
C
24 Honeywell Sensing and Control
392 Series, RV6 Series
0.5 W Conductive Plastic Potentiometers
ISSUE A 50099566
Table RV6-F Order Guide
Catalog
Listing
Electrical Dimensions
RoHS
Compliant
Mounting
Hardware
Resistance
(Ohm)
Resistance
Tolerance
(±%)
Taper
A
Slot
Depth
(mm [in])
B
Slot
Width
(mm [in])
C
Shaft
Length
(mm [in])
D
Bushing
Length
(mm [in])
RV6NAYSA103A 10 k 10 S 0,79
[0.031]
0,79
[0.031]
15,88
[0.625]
6,25
[0.250] no unassembled
RV6NAYSA502A 5 k 10 S 0,79
[0.031]
0,79
[0.031]
15,88
[0.625]
6,25
[0.250] no unassembled
RV6NAYSA503A 50 k 10 S 0,79
[0.031]
0,79
[0.031]
15,88
[0.625]
6,25
[0.250] no unassembled
RV6NAYSB101A 100 10 S 0,79
[0.031]
0,79
[0.031]
12,70
[0.500]
6,25
[0.250] no unassembled
RV6NAYSB103A 10 k 10 S 0,79
[0.031]
0,79
[0.031]
12,70
[0.500]
6,25
[0.250] no unassembled
RV6NAYSB502A 5 k 10 S 0,79
[0.031]
0,79
[0.031]
12,70
[0.500]
6,25
[0.250] no unassembled
RV6NAYSD101A 100 10 S 0,79
[0.031]
0,79
[0.031]
12,70
[0.500]
6,25
[0.250] no assembled
RV6NAYSD102A 1 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,25
[0.250] no assembled
RV6NAYSD103A 10 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,25
[0.250] no assembled
RV6NAYSD104A 100 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,25
[0.250] no assembled
RV6NAYSD105A 1 M 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,25
[0.250] no assembled
RV6NAYSD251A 250 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,25
[0.250] no assembled
RV6NAYSD252A 2.5 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,25
[0.250] no assembled
RV6NAYSD253A 25 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,25
[0.250] no assembled
RV6NAYSD253A 25 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,25
[0.250] no assembled
RV6NAYSD253A 250 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,25
[0.250] no assembled
RV6NAYSD501A 500 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,25
[0.250] no assembled
RV6NAYSD502A 5 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,25
[0.250] no assembled
RV6NAYSD502B 5 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,25
[0.250] no unassembled
RV6NAYSD503A 50 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,25
[0.250] no assembled
RV6NAYSD504A 500 k 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,25
[0.250] no assembled
(Continued on next page.)
Honeywell Sensing and Control 25
392 Series, RV6 Series
0.5 W Conductive Plastic Potentiometers
ISSUE A 50099566
Table RV6-F Order Guide (continued)
Catalog
Listing
Electrical Dimensions
RoHS
Compliant
Mounting
Hardware
Resistance
(Ohm)
Resistance
Tolerance
(±%)
Taper
A
Slot
Depth
(mm [in])
B
Slot
Width
(mm [in])
C
Shaft
Length
(mm [in])
D
Bushing
Length
(mm [in])
RV6NAYSL103A 10 k 10 S 0,79
[0.031]
0,79
[0.031]
9,53
[0.375]
6,25
[0.250] no assembled
RV6NAYSL104A 100 k 10 S 0,79
[0.031]
0,79
[0.031]
9,53
[0.375]
6,25
[0.250]] no assembled
RV6LAYSL504A 500 k 10 S 0,79
[0.031]
0,79
[0.031]
9,53
[0.375]
6,25
[0.250] no assembled
RV6LAYS-
D101AP 100 10 S 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,25
[0.250] no assembled
Dimensional Drawing (For reference only: mm [in].)
Table RV6-G Order Guide
Catalog
Listing
Electrical Dimensions
RoHS
Compliant
Mounting
Hardware
Resistance
(Ohm)
Resistance
Tolerance
(±%)
Taper
A
Slot
Depth
(mm [in])
B
Slot
Width
(mm [in])
C
Shaft
Length
(mm [in])
D
Bushing
Length
(mm [in])
RV6SAYSA103C 10 k 10 Z 0,79
[0.031]
0,79
[0.031]
15,88
[0.625]
6,35
[0.250] no assembled
RV6SAYSA104C 100 k 10 Z 0,79
[0.031]
0,79
[0.031]
15,88
[0.625]
6,35
[0.250] no unassembled
RV6SAYSD102C 1 k 10 Z 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250] no unassembled
RV6SAYSD102D 1 k 10 Z 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250] no unassembled
RV6SAYSD502D 5 k 20 Z 0,79
[0.031]
0,79
[0.031]
22,23
[0.875]
6,35
[0.250] no unassembled
Dimensional Drawing (For reference only: mm [in].)
Shown with 50% shaft rotation
1,57
[0.062]
5,08
[0.200]
5,08
[0.200]
1
Left
2
Center
3
Right
3X 2,24 Ty p.
[0.088]
2X 0,89
[0.035]
ø3,18
[0.125]
16,66 Max.
[0.656]
0,89 Max.
[0.035]
11,51
[0.453]
3,97 Ty p.
[0.156]
Mounting surface
1/4-32 NEF-2A
ø13,08
[0.515]
45°
90°
Locating
pin 1
2,03 Ty p.
[0.080]
6,46
[0.254]
B
A
D
C
Shown with 50% shaft rotation
3X 2,24 Ty p.
[0.088]
1,57
[0.062]
5,08
[0.200]
5,08
[0.200]
1
Left
2
Center
3
Right
45°
90°
Locating
pin 1
2,03 Ty p.
[0.080]
ø13,08
[0.515]
6,46
[0.254]
3,97 Ty p.
[0.156]
16,66 Max.
[0.656]
0,89 Max.
[0.035]
11,51
[ 0.453]
Mounting surface
1/4-32 NEF-2A
2X 0,89
[0.035]
ø3,18
[0.125]
B
Locating
pin 2
DA
C
Sensing and Control
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422
honeywell.com
50099566-A-EN IL50
October 2014
© 2014 Honeywell International Inc. All rights reserved.
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of
defective materials and faulty workmanship. Honeywell’s stan-
dard product warranty applies unless agreed to otherwise by
Honeywell in writing; please refer to your order acknowledgement
or consult your local sales office for specific warranty details. If
warranted goods are returned to Honeywell during the period of
coverage, Honeywell will repair or replace, at its option, without
charge those items it finds defective. The foregoing is buyer’s
sole remedy and is in lieu of all other warranties, expressed
or implied, including those of merchantability and tness for
a particular purpose. In no event shall Honeywell be liable for
consequential, special, or indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
Honeywell serves its customers through a worldwide network of
sales offices, representatives and distributors. For application
assistance, current specifications, pricing or name of the nearest
Authorized Distributor, contact your local sales office or:
E-mail: info.sc@honeywell.com
Internet: sensing.honeywell.com
Phone and Fax:
USA/Canada +1-800-537-6945
International +1-815-235-6847; +1-815-235-6545 Fax
392 Series, RV6 Series
0.5 W Conductive Plastic Potentiometers
ISSUE A 50099566
WARNING
PERSONAL INJURY
DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the product
could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
Figure 6. Mounting Hardware
Jam Nut
7,94 mm [5/16 in] across flats
3,97 mm [5/32 in] thick
Mounting Nut
1/4 x 32 thread
7,94 mm [5/16 in] across flats
Lock Washer
10,32 mm [5/16 in] outside
diameter 0,64 mm [0.025 in]
thick
O-Ring
